[Bug 538895] [NEW] No line-in/mic capture Realtek ALC883
Public bug reported:
This bug is similar to the following, but affects the REALTek ALC883 chip set.
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/523953
In brief: before adding the line "options snd-hda-intel power_save=0
power_save_controller=N position_fix=1 enable=yes" to my
/etc/modprobe.d/alsa-base.conf file, I could hear sound from the mic and
line-in jacks through my speakers and control it with the GNOME-alsamixer (both
muting and volume) but I could not record that sound stream with any software.
Adding the position fix seems to have done the trick.
Please let me know if you need more info that is provided below.
All the best,
Reuben
$ grep "^Codec\|^Vendor Id\|^Subsystem Id\|^Revision Id"
/proc/asound/card*/*codec*{,/*} | grep -B2 -A1 $(lspci -nv | grep -A1 0403 |
grep Subsystem | sed 's/://g' | awk '{ print $2 }')
grep: /proc/asound/card*/*codec*/*: No such file or directory
/proc/asound/card0/codec#3:Codec: Realtek ALC883
/proc/asound/card0/codec#3:Vendor Id: 0x10ec0883
/proc/asound/card0/codec#3:Subsystem Id: 0x8086d601
/proc/asound/card0/codec#3:Revision Id: 0x12
$ sudo lspci -vvnn
00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition
Audio Controller [1002:437b] (rev 01)
Subsystem: Intel Corporation Device [8086:d601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- http://ubuntuforums.org/showthread.php?p=1428389
wget -O alsa-info.sh http://alsa-project.org/alsa-info.sh && bash ./alsa-info.sh
Info before the fix:
http://www.alsa-project.org/db/?f=aa57662afa504a2c300bae26714850e1f77b4e84
Info after the fix:
http://www.alsa-project.org/db/?f=421c082f0c7d410f6b305e5605f06fc30479e6b0
** Affects: alsa-driver (Ubuntu)
Importance: Undecided
Status: New
--
No line-in/mic capture Realtek ALC883
https://bugs.launchpad.net/bugs/538895
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 330454] Re: error: duplicate REP tables used
*** This bug is a duplicate of bug 467278 *** https://bugs.launchpad.net/bugs/467278 ** This bug has been marked a duplicate of bug 467278 South African English Dictionary still missing lots of words -- error: duplicate REP tables used https://bugs.launchpad.net/bugs/330454 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 335423] Re: spell checker en za plurals
*** This bug is a duplicate of bug 467278 *** https://bugs.launchpad.net/bugs/467278 ** This bug has been marked a duplicate of bug 467278 South African English Dictionary still missing lots of words -- spell checker en za plurals https://bugs.launchpad.net/bugs/335423 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 356593] Re: Open Office 3.0 Spelling and Grammar flags contracted words incorrectly as errors (EN_ZA)
*** This bug is a duplicate of bug 467278 *** https://bugs.launchpad.net/bugs/467278 ** This bug has been marked a duplicate of bug 467278 South African English Dictionary still missing lots of words -- Open Office 3.0 Spelling and Grammar flags contracted words incorrectly as errors (EN_ZA) https://bugs.launchpad.net/bugs/356593 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 467278] Re: South African English Dictionary still missing lots of words
This patch fixes the en_ZA.aff file in older Ubuntu versions. I based this on an old CVS checkout from OOo and the latest affix files from http://extensions.services.openoffice.org/project/dict-en_ZA Alternatively you could patch out both en_ZA.dic and en_ZA.aff with the files in the above extension. ** Attachment added: "Patch to fix en_ZA.aff" http://launchpadlibrarian.net/39136252/dictionary-en_ZA-affix_file_fix.patch -- South African English Dictionary still missing lots of words https://bugs.launchpad.net/bugs/467278 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 398320] Re: Use of unpatched myspell affix file (en_ZA.aff) breaks English (South Africa) myspell spell-checking
*** This bug is a duplicate of bug 467278 *** https://bugs.launchpad.net/bugs/467278 ** This bug has been marked a duplicate of bug 467278 South African English Dictionary still missing lots of words -- Use of unpatched myspell affix file (en_ZA.aff) breaks English (South Africa) myspell spell-checking https://bugs.launchpad.net/bugs/398320 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286312] Re: apt-cacher refuses to pass kickstart configuration files
Have you tried adding it as a regexp in /etc/apt-cacher/apt-cacher.conf there is a section (repated below) that should make it trivial. # Permitted package files - this is a perl regular expression which matches all # package-type files (files that are uniquely identified by their filename). # The default is: #package_files_regexp = (?:\.deb|\.rpm|\.dsc|\.tar\.gz|\.diff\.gz|\.udeb|index\.db-.+\.gz|\.jigdo|\.template)$ -- apt-cacher refuses to pass kickstart configuration files https://bugs.launchpad.net/bugs/286312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 487785] Re: Cannot open BiT anymore
*** This bug is a duplicate of bug 409130 *** https://bugs.launchpad.net/bugs/409130 This is a duplicate. The fix is in the linked bug #409130 ** This bug has been marked a duplicate of bug 409130 launching backintime fails to start -- Cannot open BiT anymore https://bugs.launchpad.net/bugs/487785 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu (via bug 409130). -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 479771] [NEW] package adobe-flashplugin 10.0.15.3-1hardy1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 2
Public bug reported: Binary package hint: adobe-flashplugin this is the full error: bai...@idiot-box:~$ sudo apt-get install adobe-flashplugin Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: firefox-3.0-dev firefox-3.5-dev Use 'apt-get autoremove' to remove them. Suggested packages: konqueror-nsplugins ttf-xfree86-nonfree xfs The following packages will be upgraded: adobe-flashplugin 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 0B/4,018kB of archives. After this operation, 258kB of additional disk space will be used. (Reading database ... 148437 files and directories currently installed.) Preparing to replace adobe-flashplugin 10.0.15.3-1hardy1 (using .../adobe-flashplugin_10.0.32.18-1intrepid1_i386.deb) ... update-alternatives: error: no alternatives for iceape-flashplugin. update-alternatives: error: no alternatives for iceape-flashplugin. dpkg: warning: old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... update-alternatives: error: no alternatives for iceape-flashplugin. update-alternatives: error: no alternatives for iceape-flashplugin. dpkg: error processing /var/cache/apt/archives/adobe-flashplugin_10.0.32.18-1intrepid1_i386.deb (--unpack): subprocess new pre-removal script returned error exit status 2 postinst called with argument `abort-upgrade' dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/adobe-flashplugin_10.0.32.18-1intrepid1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) i've even gone to the software sources and enabled all the other sources (other than the cd) and i'm still getting this error. i've tried all manner of installation (tar.gz, deb, YUM, etc) and i still cannot get it to work. i've just upgraded to 9.10 so not sure why it attempting to upgrade to 10.0.15.3-1hardy1 when i'm not using hardy any more haven't for a while since i upgrades LAST time. lil help? ProblemType: Package AptOrdering: adobe-flashplugin: Install adobe-flashplugin: Configure Architecture: i386 Date: Mon Nov 9 23:24:11 2009 DistroRelease: Ubuntu 9.10 ErrorMessage: subprocess new pre-removal script returned error exit status 2 NonfreeKernelModules: nvidia Package: adobe-flashplugin 10.0.15.3-1hardy1 ProcVersionSignature: Ubuntu 2.6.31-14.48-generic SourcePackage: adobe-flashplugin Title: package adobe-flashplugin 10.0.15.3-1hardy1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 2 Uname: Linux 2.6.31-14-generic i686 ** Affects: adobe-flashplugin (Ubuntu) Importance: Undecided Status: New ** Tags: 9.10 adobe apport-package flashplayer i386 -- package adobe-flashplugin 10.0.15.3-1hardy1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 2 https://bugs.launchpad.net/bugs/479771 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 479771] Re: package adobe-flashplugin 10.0.15.3-1hardy1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 2
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/35454594/Dependencies.txt ** Attachment added: "Dmesg.txt" http://launchpadlibrarian.net/35454595/Dmesg.txt ** Attachment added: "DpkgTerminalLog.txt" http://launchpadlibrarian.net/35454596/DpkgTerminalLog.txt -- package adobe-flashplugin 10.0.15.3-1hardy1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 2 https://bugs.launchpad.net/bugs/479771 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 459054] Re: ubiquity partition step does not show some hard drives
I was also getting this. On the live cd I uninstalled the dmraid package, restarted the installer and now sda shows. -- ubiquity partition step does not show some hard drives https://bugs.launchpad.net/bugs/459054 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 461470] Re: HDD(s) incorrectly detected
I've gotten a "fix". On the live cd I uninstalled the dmraid package, restarted the installer and now sda shows. -- HDD(s) incorrectly detected https://bugs.launchpad.net/bugs/461470 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 461470] Re: HDD(s) incorrectly detected
I'm also bitten by this bug, no sda :( but all the others show up. And sda shows up everywhere else. ** Changed in: ubiquity (Ubuntu) Status: New => Confirmed -- HDD(s) incorrectly detected https://bugs.launchpad.net/bugs/461470 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 409130] Re: launching backintime fails to start
To Karmic release deciders, this is a simple one line fix for a common bug with this version of Back in Time. When karmic is out this bug will most likely affect a lot of new users that will start to use Back in Time because it's in Ubuntu's repos. -- launching backintime fails to start https://bugs.launchpad.net/bugs/409130 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 409130] Re: launching backintime fails to start
** Changed in: backintime (Ubuntu) Status: New => Fix Committed -- launching backintime fails to start https://bugs.launchpad.net/bugs/409130 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 409130] Re: launching backintime fails to start
** Also affects: backintime (Ubuntu) Importance: Undecided Status: New -- launching backintime fails to start https://bugs.launchpad.net/bugs/409130 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 436340] Re: Installer fails: grub fails on Intel ICH10 raid
This is good news I will Test and report at the weekend. -- Installer fails: grub fails on Intel ICH10 raid https://bugs.launchpad.net/bugs/436340 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 436340] Re: Installer fails: grub fails on Intel ICH10 raid
Thanks for the reply Felix, it doesn't help me but at least I understand some of the reasoning behind this. I guess karmic gets a thumbs down from me based on this regression alone. At lot of people installing Karmic for the first time, are going to get the hump when there install fails at the last hurdle. I wonder if the possibility of using grub1 can be included in the installer. -- Installer fails: grub fails on Intel ICH10 raid https://bugs.launchpad.net/bugs/436340 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 436340] Re: Installer fails: grub fails on Intel ICH10 raid
Not an good idea for me I have a reasonably high end Windows Vista install on another partition I use the raid for. This is something that need fixing pre-release, most ASUS high end gamer boards have this kind Raid and I believe most of the Biostar and ECM boards. What I really need to see is someone from the grub2 team to triage this bug but with 137 and counting open bugs against grub2 and 2 weeks to release I am quite worried. -- Installer fails: grub fails on Intel ICH10 raid https://bugs.launchpad.net/bugs/436340 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 436340] Re: Installer fails: grub fails on Intel ICH10 raid
I have exactly the same issue Intel Raid on an Asus MB uninstallable. -- Installer fails: grub fails on Intel ICH10 raid https://bugs.launchpad.net/bugs/436340 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 419793] Re: undefined symbols: translate_ascii_strcase_equal
This test script exercises libtranslate using ctypes and python it fails when trying to initialise libtranslate. ** Attachment added: "Python test script" http://launchpadlibrarian.net/30894533/libtranslate-test.py -- undefined symbols: translate_ascii_strcase_equal https://bugs.launchpad.net/bugs/419793 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 419793] [NEW] undefined symbols: translate_ascii_strcase_equal
Public bug reported: libtranslate is used by Virtaal as a plugin to provide machine translations. If this plugin is enabled on Ubuntu then you will get this error: (virtaal:28286): libtranslate-WARNING **: unable to load module "/usr/lib/libtranslate/modules/generic.so": /usr/lib/libtranslate/modules/generic.so: undefined symbol: translate_ascii_strcase_equal virtaal uses libtranslate using ctypes. I suspect that the error is related to one patched on Fedora, see: http://cvs.fedoraproject.org/viewvc/rpms/libtranslate/F-11/libtranslate-0.99-fix-modules.patch?revision=1.2&view=markup ** Affects: libtranslate (Ubuntu) Importance: Undecided Status: New -- undefined symbols: translate_ascii_strcase_equal https://bugs.launchpad.net/bugs/419793 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 4844] Re: apt-proxy-import says "no suitable backend found"
Same issue for me also on Jaunty -- apt-proxy-import says "no suitable backend found" https://bugs.launchpad.net/bugs/4844 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 410609] Re: package mythnews 0.21.0+fixes19556-0ubuntu8 failed to install/upgrade: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-common
I tried that later and got past the initial problems before hitting protocol mismatchs. Tried again this evening did a completely clean upgrade to fixes no issue, then dist-upgrade to trunk and although the packages installed with out complaint, I now get a protocol mistmatch. I am not sure at this point if I need to open fresh bug for a set of interdependent packages that installs in a sucessful but broken way. 2009-08-16 20:49:36.946 mythfrontend version: trunk [Unknown] www.mythtv.org 2009-08-16 20:49:36.946 Using runtime prefix = /usr 2009-08-16 20:49:38.013 Empty LocalHostName. 2009-08-16 20:49:38.013 Using localhost value of malatesta 2009-08-16 20:49:38.024 New DB connection, total: 1 2009-08-16 20:49:38.030 Connected to database 'mythconverg' at host: localhost 2009-08-16 20:49:38.033 Closing DB connection named 'DBManager0' 2009-08-16 20:49:38.055 ScreenSaverX11Private: Gnome screen saver support enabled 2009-08-16 20:49:38.057 DPMS is active. 2009-08-16 20:49:38.061 Primary screen: 0. 2009-08-16 20:49:38.062 Connected to database 'mythconverg' at host: localhost 2009-08-16 20:49:38.064 Using screen 0, 1360x768 at 0,0 2009-08-16 20:49:38.099 MythUI Image Cache size set to 20971520 bytes 2009-08-16 20:49:38.100 Enabled verbose msgs: important general 2009-08-16 20:49:38.230 The theme (defaultmenu) is missing a themeinfo.xml file 2009-08-16 20:49:38.661 The theme (defaultmenu) is missing a themeinfo.xml file 2009-08-16 20:49:38.784 Desktop video mode: 1360x768 59 Hz 2009-08-16 20:49:38.935 Primary screen: 0. 2009-08-16 20:49:38.936 Using screen 0, 1360x768 at 0,0 2009-08-16 20:49:38.937 Using theme base resolution of 1280x720 2009-08-16 20:49:38.950 LIRC: Successfully initialized '/dev/lircd' using '/home/jim/.mythtv/lircrc' config 2009-08-16 20:49:38.950 JoystickMenuThread Error: Joystick disabled - Failed to read /home/jim/.mythtv/joystickmenurc 2009-08-16 20:49:39.149 Using the OpenGL painter 2009-08-16 20:49:39.490 Font needs a face 2009-08-16 20:49:39.490 Font needs a face 2009-08-16 20:49:39.490 Font needs a face 2009-08-16 20:49:39.490 Font needs a face 2009-08-16 20:49:39.493 Loading base theme from /usr/share/mythtv/themes/neon-wide/base.xml 2009-08-16 20:49:39.674 Loading base theme from /usr/share/mythtv/themes/default-wide/base.xml 2009-08-16 20:49:39.742 Loading base theme from /usr/share/mythtv/themes/default/base.xml 2009-08-16 20:49:39.750 Current Schema Version: 1242 2009-08-16 20:49:39.757 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2009-08-16 20:49:39.763 Protocol version mismatch (frontend=46,backend=40) -- package mythnews 0.21.0+fixes19556-0ubuntu8 failed to install/upgrade: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-common https://bugs.launchpad.net/bugs/410609 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 410609] [NEW] package mythnews 0.21.0+fixes19556-0ubuntu8 failed to install/upgrade: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-commo
Public bug reported: Binary package hint: mythplugins Seeing this same issue issue on more than on package just upgraded from fixes to trunk on 9.04 and mythfrontend is unusable with segfaults not sure at this point just how broken, will try and report more once I know it. ProblemType: Package Architecture: amd64 DistroRelease: Ubuntu 9.04 ErrorMessage: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-common NonfreeKernelModules: nvidia Package: mythnews 0.21.0+fixes19556-0ubuntu8 SourcePackage: mythplugins Title: package mythnews 0.21.0+fixes19556-0ubuntu8 failed to install/upgrade: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-common Uname: Linux 2.6.28-14-generic x86_64 ** Affects: mythplugins (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package -- package mythnews 0.21.0+fixes19556-0ubuntu8 failed to install/upgrade: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-common https://bugs.launchpad.net/bugs/410609 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 410609] Re: package mythnews 0.21.0+fixes19556-0ubuntu8 failed to install/upgrade: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-common
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/30046719/Dependencies.txt ** Attachment added: "DpkgTerminalLog.gz" http://launchpadlibrarian.net/30046720/DpkgTerminalLog.gz -- package mythnews 0.21.0+fixes19556-0ubuntu8 failed to install/upgrade: trying to overwrite `/usr/share/mythtv/themes/default-wide/news-ui.xml', which is also in package mythtv-common https://bugs.launchpad.net/bugs/410609 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 363883] Re: Jaunty regression: Mediatomb stops working?
*** This bug is a duplicate of bug 212441 *** https://bugs.launchpad.net/bugs/212441 ** This bug has been marked a duplicate of bug 212441 Mediatomb Init Script not working : upnp error -117 -- Jaunty regression: Mediatomb stops working? https://bugs.launchpad.net/bugs/363883 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 366866] Re: Init script not working because network interfaces are not ready
*** This bug is a duplicate of bug 212441 *** https://bugs.launchpad.net/bugs/212441 ** This bug has been marked a duplicate of bug 212441 Mediatomb Init Script not working : upnp error -117 -- Init script not working because network interfaces are not ready https://bugs.launchpad.net/bugs/366866 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 212441] Re: Mediatomb Init Script not working : upnp error -117
Unfortunately the workaround proposed in the mediatomb faq no longer works on Jaunty as detailed by comment #4. I also tried setting eth0 in the interface file and tried removing network manager and tried moving mediatomb to start after NetworkManager in rc2 (the apparent default runlevel) but none of those worked. I also tried a script with a sleep of 60 seconds then it would restart mediatomb and that also didn't work. I wanted to emulate the behaviour of the ntp daemon which seems to start with the network. On further investigation I found the directories if- up.d and if-down.d in /etc/network which contain scripts that run when the network comes up and goes down respectively. Emulating a line from the ntp script I created two scripts for mediatomb. The one in if-up.d executes: invoke-rc.d mediatomb restart and in if-down.d it executes: invoke-rc.d mediatomb stop After I rebooted my machine mediatomb now starts up automatically with the network. I'm attaching a tar archive with the two scripts, you can cd to /etc/network and untar the archive there. Last thing, the links in the rcX directories are now pointless so I removed mine by executing: sudo update-rc.d -f mediatomb remove And finally, you can always check /var/log/mediatomb.log for details on if mediatomb is running. ** Attachment added: "scripts to start and stop mediatomb with the network" http://launchpadlibrarian.net/29505275/mediatombnetscripts.tar -- Mediatomb Init Script not working : upnp error -117 https://bugs.launchpad.net/bugs/212441 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 36251] Re: Unreadable Font Size for GDM Login/Password
Fresh install of Jaunty 9.04 using a 1360x768 32" TV and a vga connector almost completely unreadable username and password fiddled with Human.xml to no avail. -- Unreadable Font Size for GDM Login/Password https://bugs.launchpad.net/bugs/36251 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322921] Re: At startup, can't drag windows between dual monitors (Intel graphics on T61)
I have the same problem with Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c). I have a Dell monitor and a lcd monitor. Attached is a screenshot of how I want to monitors to work and most of the time do work. But when I restart I can't drag windows to the Dell monitor without changing the screen resolution. ** Attachment added: "screenshot_001.png" http://launchpadlibrarian.net/26315871/screenshot_001.png -- At startup, can't drag windows between dual monitors (Intel graphics on T61) https://bugs.launchpad.net/bugs/322921 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 335993] Re: [Jaunty 9.04 alpha5] DeprecationWarning: when starting Hellanzb
The patch from http://www.hellanzb.com/trac/hellanzb/ticket/419 is bad and breaks hellanzb in Jaunty (simply does not work). It treats hashlib.md5 as a drop in replacement for the old md5 lib which it is not, causing an AttributeError when it attempts to call md5.new() -- [Jaunty 9.04 alpha5] DeprecationWarning: when starting Hellanzb https://bugs.launchpad.net/bugs/335993 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 347712] Re: gazpacho ERROR: Could not find required directory: /usr/lib/python2.6/site-packages
The startup script /usr/bin/gazpacho is trying to explicitly add site- packages to the python sys.path, but site-packages is now replaced by dist-packages for python 2.6. -- gazpacho ERROR: Could not find required directory: /usr/lib/python2.6/site-packages https://bugs.launchpad.net/bugs/347712 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 347712] Re: gazpacho ERROR: Could not find required directory: /usr/lib/python2.6/site-packages
Confirming error. -- gazpacho ERROR: Could not find required directory: /usr/lib/python2.6/site-packages https://bugs.launchpad.net/bugs/347712 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 344145] Re: rhythmbox crashed with SIGSEGV in strcmp()
** Attachment added: "CoreDump.gz" http://launchpadlibrarian.net/23984911/CoreDump.gz ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/23984912/Dependencies.txt ** Attachment added: "Disassembly.txt" http://launchpadlibrarian.net/23984913/Disassembly.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/23984914/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/23984915/ProcStatus.txt ** Attachment added: "Registers.txt" http://launchpadlibrarian.net/23984916/Registers.txt ** Attachment added: "Stacktrace.txt" http://launchpadlibrarian.net/23984918/Stacktrace.txt ** Attachment added: "ThreadStacktrace.txt" http://launchpadlibrarian.net/23984919/ThreadStacktrace.txt ** Visibility changed to: Public -- rhythmbox crashed with SIGSEGV in strcmp() https://bugs.launchpad.net/bugs/344145 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293424] Re: intrepid: iwl3945 won't connect with WEP passphrase
I am experiencing the same issue. My home wireless network is D-Link router 802.11G. My ubuntu Laptop is a Lennovo R61i ThinkPad. The wireless driver is iwl3945. I have successfully used this laptop on open wireless networks and WPA secure networks at a local coffee house with no issues. However when I try to employ WEP 128-bit passphrase the setting flips to 40/128 bit key with my passphrase modified to a hex value. I too have an Apple Powerbook I have ran on this wireless network for well over a year using the WEP 128-bit passphrase encryption scheme with no issues. -- intrepid: iwl3945 won't connect with WEP passphrase https://bugs.launchpad.net/bugs/293424 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319110] [NEW] Update list of translation services
Public bug reported: I prepared patches to update libtranslate for Fedora. This updates Google, might even fix bug 124287, refreshes a few others and adds some new services. This is the consolidated patch: https://bugzilla.redhat.com/attachment.cgi?id=328411&action=edit I also prepared individual updates to the various services if you want to review each individually, See the attachments to the bug: https://bugzilla.redhat.com/show_bug.cgi?id=478626 ** Affects: libtranslate (Ubuntu) Importance: Undecided Status: New -- Update list of translation services https://bugs.launchpad.net/bugs/319110 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 271962] Re: VT-switching from X returns you to X the first time
Have: Linux home4 2.6.27-11-generic #1 SMP Fri Dec 19 16:29:52 UTC 2008 i686 GNU/Linux Intrepid V8.10 I also confirm this bug. Additionally: Unexpected additional behavior, can't imagine it being correct. After doing Ctrl+Alt+F2 twice to get login prompt I login normally; do my work with schroot; exit chroot by typing "exit"; then exit tty session by typing "exit"; I am immediately returned to GNOME/tty7; shouldn't I be at tty2 with prompt for login? Yikes, from user perspective this appears login is broken (Coulson 20081104). Us geeks will deal with it, but layperson business owner will _emotionally_ not like appearance that employee user sessions are insecure (there is confidential business information some employees should not see that is at another's desktop). I don't know what files you want/need. Please advise and I will duplicate error and send files. -- VT-switching from X returns you to X the first time https://bugs.launchpad.net/bugs/271962 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 296073] Re: All News Bins empty after program start
This bug is repaired as of Liferea V1.4.19. See: http://sourceforge.net/tracker/?func=detail&group_id=87005&atid=581684&aid=2457165 Thank you llando/Lars Additional Information: YMMV Installing a newer Liferea version from, for example: http://blog.getdeb.net/ may help you. See also: http://liferea.sourceforge.net/ Installation of V1.4.23 _did solve_ problem of new items added to News Bin disappearing on Liferea restart. Installation of V1.4.23 _did not solve_ problem of "deletion" of News Bin items on upgrade. These items are apparently permanently lost. (this is not a compliant of any kind against maintainer, just statement of information so others can make informed choices about what to do; so others don't have to repeat my work) V1.4.23 seems to work a-okay for me. This bug can now be closed. -- All News Bins empty after program start https://bugs.launchpad.net/bugs/296073 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 296073] Re: All News Bins empty after program start
Upgraded from Gutsy V7.10 to Intrepid V8.10 (via Hardy). All V7.10 News Bins present in V8.10 (Liferea 1.4.18) All News Bins V8.10 _empty_. Can additionally confirm original bug (Frank), in lieu of create new News Bin, using any existing News Bin; same behavior as original bug. Does any one have an idea if this is an Ubuntu issue or Liferea issue? Reed -- All News Bins empty after program start https://bugs.launchpad.net/bugs/296073 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 264468] Re: GNOME desktop brightness automatically dimmed at startup
I've posted a dirty hack on the ubuntu forums, follow the link above. It requires a little terminal kung-fu, but is completely explained. The problem, interestingly seems to have been resolved in Intrepid 8.10. -- GNOME desktop brightness automatically dimmed at startup https://bugs.launchpad.net/bugs/264468 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 284000] [NEW] Automatic update on 15th October 2008 caused my soundcard to stop working (Dell Inspiron 1525)
Public bug reported: Following lines are new in /var/log/messages following the update Oct 15 19:36:40 sandman kernel: [ 23.389084] snd_hda_codec: no version for "snd_ctl_add" found: kernel tainted. Oct 15 19:36:40 sandman kernel: [ 23.389493] snd_hda_codec: Unknown symbol snd_ctl_elem_read Oct 15 19:36:40 sandman kernel: [ 23.389541] snd_hda_codec: Unknown symbol snd_ctl_elem_write Oct 15 19:36:40 sandman kernel: [ 23.392858] snd_hda_intel: Unknown symbol snd_hda_bus_new Oct 15 19:36:40 sandman kernel: [ 23.392974] snd_hda_intel: Unknown symbol snd_hda_build_pcms Oct 15 19:36:40 sandman kernel: [ 23.393031] snd_hda_intel: Unknown symbol snd_hda_codec_new Oct 15 19:36:40 sandman kernel: [ 23.393142] snd_hda_intel: Unknown symbol snd_hda_queue_unsol_event Oct 15 19:36:40 sandman kernel: [ 23.393374] snd_hda_intel: Unknown symbol snd_hda_calc_stream_format Oct 15 19:36:40 sandman kernel: [ 23.393475] snd_hda_intel: Unknown symbol snd_hda_suspend Oct 15 19:36:40 sandman kernel: [ 23.393571] snd_hda_intel: Unknown symbol snd_hda_codec_remove_notify_all Oct 15 19:36:40 sandman kernel: [ 23.393679] snd_hda_intel: Unknown symbol snd_hda_resume Oct 15 19:36:40 sandman kernel: [ 23.393764] snd_hda_intel: Unknown symbol snd_hda_build_controls ... Oct 15 19:36:40 sandman kernel: [ 26.407741] hsfengine: module license 'see LICENSE file distributed with driver' taints kernel. Oct 15 19:36:40 sandman kernel: [ 26.588978] usbcore: registered new interface driver hsfusbcd2 Oct 15 19:36:40 sandman kernel: [ 26.609305] snd_hda_codec: Unknown symbol snd_ctl_elem_read Oct 15 19:36:40 sandman kernel: [ 26.609361] snd_hda_codec: Unknown symbol snd_ctl_elem_write Oct 15 19:36:40 sandman kernel: [ 26.610809] snd_hda_intel: Unknown symbol snd_hda_bus_new Oct 15 19:36:40 sandman kernel: [ 26.610927] snd_hda_intel: Unknown symbol snd_hda_build_pcms Oct 15 19:36:40 sandman kernel: [ 26.610988] snd_hda_intel: Unknown symbol snd_hda_codec_new Oct 15 19:36:40 sandman kernel: [ 26.611106] snd_hda_intel: Unknown symbol snd_hda_queue_unsol_event Oct 15 19:36:40 sandman kernel: [ 26.611354] snd_hda_intel: Unknown symbol snd_hda_calc_stream_format Oct 15 19:36:40 sandman kernel: [ 26.611462] snd_hda_intel: Unknown symbol snd_hda_suspend Oct 15 19:36:40 sandman kernel: [ 26.611577] snd_hda_intel: Unknown symbol snd_hda_codec_remove_notify_all Oct 15 19:36:40 sandman kernel: [ 26.611695] snd_hda_intel: Unknown symbol snd_hda_resume Oct 15 19:36:40 sandman kernel: [ 26.611787] snd_hda_intel: Unknown symbol snd_hda_build_controls ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Automatic update on 15th October 2008 caused my soundcard to stop working (Dell Inspiron 1525) https://bugs.launchpad.net/bugs/284000 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 264468] [NEW] GNOME desktop brightness automatically dimmed at startup
Public bug reported: Binary package hint: gnome-power-manager Please see also http://ubuntuforums.org/showthread.php?p=5716361 Currently there are a number of disgruntled users whose displays are set to be dimmed at boot, including myself, who are seeking a solution to stop this dimming at boot. Power Management preferences used to have an option to set the brightness at boot, which now seems to have disappeared. I've had a look through gconf-editor and according to the key /apps/gnome-power-manager/backlight/brightness_ac my brightness is set to 100 at startup, however it is still 0% at boot according to the brightness applet. How do we boot up with 100% brightness? As you will see from the forum thread, it's a variety of graphics cards and laptops which are affected. Personally I am using gnome-power-manager 2.22.1-1ubuntu4 on Ubuntu 8.04 Thanks, Phill Bailey ** Affects: gnome-power-manager (Ubuntu) Importance: Undecided Status: New -- GNOME desktop brightness automatically dimmed at startup https://bugs.launchpad.net/bugs/264468 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 250093] Re: popen does not work bidirectionally in lInux
This is functionality beyond what's required by posix: http://www.opengroup.org/onlinepubs/009695399/functions/popen.html So for portability, programs are going to need to cope with this anyway. For a portable solution, see the glibc manual: http://www.gnu.org/software/libc/manual/html_node/Pipe- to-a-Subprocess.html#Pipe-to-a-Subprocess ** Changed in: glibc (Ubuntu) Status: New => Won't Fix -- popen does not work bidirectionally in lInux https://bugs.launchpad.net/bugs/250093 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219897] Re: package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade
Attached the output of the first command. ** Attachment added: "bin.txt" http://launchpadlibrarian.net/15920780/bin.txt -- package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade https://bugs.launchpad.net/bugs/219897 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219897] Re: package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade
Attached the output of the second command. ** Attachment added: "jvm.txt" http://launchpadlibrarian.net/15920977/jvm.txt -- package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade https://bugs.launchpad.net/bugs/219897 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219897] Re: package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade
This isn't actually an issue any more. I restored my Gutsy backup and then later installed Hardy from CD, rather than through update-manager, and haven't had any problems. So therefore it's not the same install that had the issue and so this bug report is possibly null and void now, I've not had any issue with Java since doing a fresh install. -- package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade https://bugs.launchpad.net/bugs/219897 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 203527] Re: Clicking on clock applet hangs gnome-panel
I have found the same issue, however in my experience removing all locations (of which I had only one) solved the problem to some extent. There is still a short lag between clicking the clock and the calendar appearing, during which time the Window list is also frozen, but the calendar does appear, which was not the case before. I'm loathe to try uninstalling Evolution, as the calendar in the panel is useful to have easily at hand. I'm using Hardy and a fresh install from the 8.04 live CD did not exhibit this issue, an update appears to have caused it. -- Clicking on clock applet hangs gnome-panel https://bugs.launchpad.net/bugs/203527 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 181812] Re: Execution of grub-install (hd0) failed
I've encountered this problem with the released version of Ubuntu 8.04. Specifically the line that appears as the error is: "grub-installer: The file /boot/grub/stage1 not read correctly." This appears in both of the attached syslog files. Also the error appears even why trying to install grub manually. I have attempted to install this both to the MBR and to the first partition, using the full install and also running grub separately post failed install. Note that in my case the hard drive involved is hd2 and that Windows resides on hd0. -- Execution of grub-install (hd0) failed https://bugs.launchpad.net/bugs/181812 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 230799] [NEW] Anagramarama causes video weirdness
Public bug reported: Binary package hint: anagramarama Expected behavior: Anagramarama will play nice with my computer. It will not cause issues with my display. Actual Result: Upon starting the anagramarama application the video goes blank. It comes back, but if the application is left open, when my screensaver comes on, the LCD flickers badly. This does not happen when anagramarama is not left open. I did not notice this issue before the purchase of the LCD, however, the upgrade to hardy and the purchase of the lcd were on the same day. I am using Hardy Heron - recently updated from Gutsy I have an ATI Radeon HD 2600 Pro 512MB DDR2, PCI Express Video Card I am using the fglrx proprietary ATI accelerated graphics driver that came with hardy I have a Samsung 245BW Lcd screen ** Affects: anagramarama (Ubuntu) Importance: Undecided Status: New -- Anagramarama causes video weirdness https://bugs.launchpad.net/bugs/230799 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 185263] Re: -mlong32 is an unknown option
On Mon, May 5, 2008 at 6:46 AM, Adam Buchbinder <[EMAIL PROTECTED]> wrote: > If it's an upstream problem (as Tollef said, "Not only would you need a > > different libc, you would have to have _all_ other libraries compiled > with this same other ABI. I suspect you would have to get support into > the kernel as well for it."), where's the best place to start filing > wishlist bugs for it? The gcc bugzilla? The glibc bugzilla? The kernel > bugzilla? Is this entirely impossible without hardware support from > Intel and AMD? (Given that the request is simply for the option to > compile some applications to use 32-bit pointers and be restricted to > 4GB of address space, perhaps the problem can be solved at the virtual > memory level rather than requiring specialized hardware?) Well, let's think this through for a sec. The goal is to have 32-bit pointers to better use processor cache, but still use the enhanced instructions and registers provided by the amd64 instructions. This is off the top of my head without doing any research at all. That means I've likely missed at least one step in here. This is probably possible on the hardware, although I haven't looked at it directly. Assuming it is: You first need to define an ABI document describing what registers and such would be used for calling conventions. You then need to talk to the toolchain folks to get a GNU triple assigned to this mode. The kernel would have to be hacked to setup the address space appropriately (make sure that the vDSO and such were located in low enough memory). Binutils would need hacking to understand that triple, and maybe some tweaks to the assembler to check for invalid pointer sizes, and some tweaks to the linker. gcc would need hacking to restrict itself to a 32bit address space, while teaching it about the additional registers and instructions. Then you'd need to hack on glibc to make sure that it knew the triple and would build. This would also mean hacking any custom asm files so that they constrained themselves appropriately. There would probably be some elf changes as well to match the ABI document. After all this had happened, you'd then need to convince some distro that enough people would care about cache lines and wanted the additional performance so that they'd go through the hassle of building this and QAing, etc. You'd also have to hack on any multimedia libraries and crypto libraries to provide the optimised versions to get decent performance. I have a vague feeling that we've heard from the only person who *actually* cares about this problem. Anyone else is probably using ppc+altivec, sparc or some other arch where the 32 bit environment in closer to what the 64 bit one provides. Tks, Jeff Bailey -- Jeff Bailey - http://www.raspberryginger.com/jbailey/ - "Remember, homosexuality is a choice, like cancer" - midwestteensexshow.com -- -mlong32 is an unknown option https://bugs.launchpad.net/bugs/185263 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 226037] Re: binutils 2.18 build failure on hardy
If you can run makeinfo from the command line, then they problem doesn't seem likely to be with Ubuntu. Check the config.log output and see what it's trying to do that it can't detect makeinfo. In any event, this certainly isn't a bug on binutils, so I'm going to reject this for now. Feel free to open it against a different package once you figure out from the log what's actually failing. (BTW, Hardy includes a CVS snapshot of Binutils 2.18.1. Why are you building your own copy?) -- binutils 2.18 build failure on hardy https://bugs.launchpad.net/bugs/226037 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 226037] Re: binutils 2.18 build failure on hardy
This bug has nothing to do with the packaged binutils. More analysis needed to figure out what package it should be reported against. ** Changed in: binutils (Ubuntu) Status: New => Invalid -- binutils 2.18 build failure on hardy https://bugs.launchpad.net/bugs/226037 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219897] Re: package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/13587685/Dependencies.txt ** Attachment added: "DpkgTerminalLog.gz" http://launchpadlibrarian.net/13587686/DpkgTerminalLog.gz -- package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade https://bugs.launchpad.net/bugs/219897 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219897] [NEW] package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade
Public bug reported: Error encountered when upgrading to Hardy RC from Gutsy using `update- manager -d`. Reinstalling package does not fix issue. ProblemType: Package Architecture: i386 Date: Sun Apr 20 15:34:59 2008 DistroRelease: Ubuntu 8.04 ErrorMessage: dependency problems - leaving unconfigured NonfreeKernelModules: nvidia ath_hal Package: sun-java6-plugin 6-06-0ubuntu1 PackageArchitecture: i386 SourcePackage: sun-java6 Title: package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade: dependency problems - leaving unconfigured Uname: Linux 2.6.24-16-generic i686 ** Affects: sun-java6 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package sun-java6-plugin 6-06-0ubuntu1 failed to install/upgrade https://bugs.launchpad.net/bugs/219897 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 104470] Re: [Feisty] Firefox crashed -- libflashplayer.so
I can confirm this is happening on my 7.10 laptop. I'm running firefox 2.0.0.13+1nobinonly-0ubuntu0.7.10 & flashplugin-nonfree 9.0.124.0ubuntu1~gutsy1. Any attempt at opening a page with a flash video crashes firefox. Uninstalling flashplugin and downloading the vanilla 9.0.124 plugin from Adobe fixed the issue. -- [Feisty] Firefox crashed -- libflashplayer.so https://bugs.launchpad.net/bugs/104470 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 115597] Re: Manually loading snd-powermac causes "badness" on ppc64-smp
I can't - I no longer own the G5. -- Manually loading snd-powermac causes "badness" on ppc64-smp https://bugs.launchpad.net/bugs/115597 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 180814] Re: Gutsy upgrade to Hardy Alpha 2 broke mythfrontend video playback
Now running 8.4 with standard nv graphics driver and things are much more stable. -- Gutsy upgrade to Hardy Alpha 2 broke mythfrontend video playback https://bugs.launchpad.net/bugs/180814 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 200700] Re: openoffice en-za missing "Export to PDF" dialog text
Hi Morgan et al Please don't work around this problem lets try fix it. For OOo we have en_ZA langpacks, they aren't simply copies of en_GB. We haven't updated them for a while, OOo should revert to the en_US if en_ZA is missing. What I propose is that I build a new en_ZA GSI file which I will try upstream or point to for this bug, -- openoffice en-za missing "Export to PDF" dialog text https://bugs.launchpad.net/bugs/200700 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 180814] Re: Gutsy upgrade to Hardy Alpha 2 broke mythfrontend video playback
I seem to be having a similar problem, Linux monkey 2.6.22-14-generic with v4l patches applied for Nova-T-500 dual tuner sometimes when I select a prerecorded show whole screen turns pink and everything freezes no ssh and nothing in the logs. I can only hard reset. Happy to supply further information and run tests if you tell me what you need. -- Gutsy upgrade to Hardy Alpha 2 broke mythfrontend video playback https://bugs.launchpad.net/bugs/180814 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 90681] Re: resolv.conf overwritten using VPN/PPP etc...
I am on Gutsy. When i connect to the office vpn my local dns and local search entries which are set by my local DHCP Server disappear, the remote nameservers have entries, but none of the remote search domains i want are present unless i add them. (After disconnecting the original settings are back.) I agree with the comments that the /etc/resolv.conf file should contain (or the option to have it contain) a merge of local and remote. I would also like to see the option in the vpn setup to add search domains - my office uses several because of acquisitions, and production network separation projects. -- resolv.conf overwritten using VPN/PPP etc... https://bugs.launchpad.net/bugs/90681 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 196380] [NEW] /usr/lib/games/nethack/recover needs to be setgid games
Public bug reported: Binary package hint: nethack In nethack-common, /usr/lib/games/nethack/recover needs to be setgid games in order to access save game files. I'll upload the fix shortly. ** Affects: nethack (Ubuntu) Importance: Undecided Status: New -- /usr/lib/games/nethack/recover needs to be setgid games https://bugs.launchpad.net/bugs/196380 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 129910] Re: Blank ttys when using vesafb (vga=xxx)
Please keep in mind the Ubuntu Code of Conduct: http://www.ubuntu.com/community/conduct -- Blank ttys when using vesafb (vga=xxx) https://bugs.launchpad.net/bugs/129910 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 193098] Re: grub using wrong menu.lst after gutsy upgrade?
Do you have a separate /boot partition? Also, check your /etc/kernel-img.conf file and see whether it has these 2 lines: postinst_hook = update-grub postrm_hook = update-grub -- grub using wrong menu.lst after gutsy upgrade? https://bugs.launchpad.net/bugs/193098 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185263] Re: -mlong32 is an unknown option
The manpage isn't misleading in the sense that it's wrong in any way. The manpage is misleading in that manpages such if they take more than a page or two of screen real-estate. The problem with him not reporting this bug is that you and I are now stuck having this conversation, rather than the more reasonable case of the person having the problem with me or one of the other toolchain folks. I can't turn around to you and say "Tell me more about your problem so that I can help come up with an appropriate answer within the constraints of our resources" and get a meaningful answer. The fact that Donald is a reporter who could actually meaningfully give input to the question makes it that much more frustrating. =/ Marking as invalid. Documentation and compiler are consistent and correct - this option does not exist for amd64. ** Changed in: gcc-3.3 (Ubuntu) Status: Won't Fix => Invalid -- -mlong32 is an unknown option https://bugs.launchpad.net/bugs/185263 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156295] Re: eps2eps fails to write the correct bounding box -- new bug in Gutsy, worked in Feisty
I have a similar problem with incorrect bounding boxes using ghostscript -sDEVICE=bbox -dNOPAUSE -dBATCH socal.eps The previous version gave... ESP Ghostscript 815.02 (2006-04-19) Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved. This software comes with NO WARRANTY: see the file PUBLIC for details. Loading NimbusSanL-Regu font from /usr/share/fonts/default/Type1/n019003l.pfb... 3127688 1614387 2489448 842504 2 done. Using NimbusSansL-Regu font for NimbusSanL-Regu. %%BoundingBox: 39 48 365 361 %%HiResBoundingBox: 39.919428 48.438350 364.865965 360.311966 and the new one gives... GPL Ghostscript SVN PRE-RELEASE 8.61 (2007-08-02) Copyright (C) 2007 Artifex Software, Inc. All rights reserved. This software comes with NO WARRANTY: see the file PUBLIC for details. Loading NimbusSanL-Regu font from /var/lib/defoma/gs.d/dirs/fonts/n019003l.pfb... 2706800 1284010 2908376 1206339 2 done. %%BoundingBox: 70 70 359 355 %%HiResBoundingBox: 70.857209 70.857209 358.875200 354.315224 I can't tell why the bounding box is smaller in the new version. The eps file is attached. ** Attachment added: "socal.eps" http://launchpadlibrarian.net/11648184/socal.eps -- eps2eps fails to write the correct bounding box -- new bug in Gutsy, worked in Feisty https://bugs.launchpad.net/bugs/156295 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185263] Re: -mlong32 is an unknown option
Please stop third-party relaying messages from people. All that's happening is that we're reply to bug reports that the actual reporter may or may not be seeing. The man pages are *not* buggy. I refer everyone to the relevent section: MIPS Options -EL -EB -march=arch -mtune=arch -mips1 -mips2 -mips3 -mips4 -mips32 -mips32r2 -mips64 -mips16 -mno-mips16 -mabi=abi -mabicalls -mno-abicalls -mshared -mno-shared -mxgot -mno-xgot -mgp32 -mgp64 -mfp32 -mfp64 -mhard-float -msoft-float -msingle-float -mdouble-float -mdsp -mpaired-single -mips3d -mlong64 -mlong32 -msym32 -mno-sym32 -Gnum -membed‐ ded-data -mno-embedded-data -muninit-const-in-rodata -mno-uninit-const-in-rodata -msplit-addresses -mno-split-addresses -mexplicit-relocs -mno-explicit-relocs -mcheck-zero-division -mno-check-zero-division -mdivide-traps -mdivide-breaks -mmemcpy -mno-memcpy -mlong-calls -mno-long-calls -mmad -mno-mad -mfused-madd -mno-fused-madd -nocpp -mfix-r4000 -mno-fix-r4000 -mfix-r4400 -mno-fix-r4400 -mfix-vr4120 -mno-fix-vr4120 -mfix-vr4130 -mfix-sb1 -mno-fix-sb1 -mflush-func=func -mno-flush-func -mbranch-likely -mno-branch-likely -mfp-exceptions -mno-fp-exceptions -mvr4130-align -mno-vr4130-align Even the full documentation section is under "MIPS Options". While this would probably be a fascinating option for amd64 to grow (ia64 has the option for an ILP32 mode on HP-UX, for instance), I suspect that the likelyhood of desktop systems not having >4GB of Ram in the near future is pretty slim (and certainly will be true by the time toolchain, kernel, and system libraries would have the capability). For servers, having more than 4GB is already reasonable and common. -- -mlong32 is an unknown option https://bugs.launchpad.net/bugs/185263 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 77178] Re: Refresh-rate problems when starting X after usplash
This issue cleared up. I've since switched to an nvidia card away from my ATi X800 which had a lot of these types of quirks. -- Refresh-rate problems when starting X after usplash https://bugs.launchpad.net/bugs/77178 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 151861] Re: emacs22-common-non-dfsg fails to install
I, too, am experiencing this issue when trying to add emacs22-common- non-dfsg with Synaptic. -- emacs22-common-non-dfsg fails to install https://bugs.launchpad.net/bugs/151861 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 111505] Re: segv from repl
I can confirm that nmh works fine on Gutsy x86. -- segv from repl https://bugs.launchpad.net/bugs/111505 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 179785] Fails to start, gives error message epiphany-browser: error while loading shared libraries: libplds4.so: cannot open shared object file: No such file or directory
Public bug reported: Binary package hint: epiphany-browser Sometimes after updating to Hardy, ephy started failing to run with the following error: epiphany-browser: error while loading shared libraries: libplds4.so: cannot open shared object file: No such file or directory Installing libnspr4-dev solved the problem, but the right thing would be to make sure to load the installed library rather than the development symlink. ** Affects: epiphany-browser (Ubuntu) Importance: Undecided Status: New -- Fails to start, gives error message epiphany-browser: error while loading shared libraries: libplds4.so: cannot open shared object file: No such file or directory https://bugs.launchpad.net/bugs/179785 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 126337] Re: IDE drivers not loaded at boot with powerpc
If powerpc were actually getting that type of testing, these bugs wouldn't be showing up. There's nothing about being a port that makes it any harder to support. Community members are able to contribute to the toolchain, the kernel, etc., as well as doing the testing. What we really need on ppc is folks who are brave enough to run the bleeding edge distros from nearly the beginning of the cycle and the willingness to try and fix problems like these. The last set of us doing this have largely switched from x86. 2007/12/20, Rogério Brito <[EMAIL PROTECTED]>: > Hi. > > On 12/20/2007 01:36 PM, Andrew Roazen wrote: > > Seconded. Is this considered unimportant, or is it actually complex? I have > > an > > iMac I'd like to gift with Gutsy on it, but it's a no-go until it actually > > boots. > > I'm on the same boat: I have an iBook G3 that is a fine computer and is > running > proprietary software right now, but I would love to have the flexibility of > using Free Software, as an enthusiast. > > I think that, in this case, using Debian proper would be a good compromise. I > would miss the Ubuntu-ness and all the convenience of an end-user > distribution, > but if Ubuntu doesn't work, what can exactly I do? > > Changing the initrd so that it can boot on all those machines that were > "orphaned" by Apple in their latest Operating System is a priority that I > thought that would be taken into consideration for the Gutsy release (here, > the > installed distribution didn't work since Feisty). > > Anyway, if there are proposals from the Ubuntu developers to have powerpc > become > a non-port again, I think that many people would contribute with the core team > to have one very good distribution working with machines that were ignored > otherwise. > > Regards, > > -- > Rogério Brito : [EMAIL PROTECTED],ime.usp}.br : GPG key 1024D/7C2CAEB8 > http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito > Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org > > -- > IDE drivers not loaded at boot with powerpc > https://bugs.launchpad.net/bugs/126337 > You received this bug notification because you are a member of Ubuntu > PowerPC Architecture Team, which is a bug assignee. > -- Jeff Bailey - http://www.raspberryginger.com/jbailey/ -- IDE drivers not loaded at boot with powerpc https://bugs.launchpad.net/bugs/126337 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 176249] Grub ignores device.map when booting
Public bug reported: Binary package hint: grub My system has 3 drives, 2 SATA drives that are sda & sdb and one IDE drive that's hda. In my device.map file I did the following: (hd0) /dev/sda (hd1) /dev/sdb (hd2) /dev/hda Windows is installed on hda, but in my menu.lst I have to configure it as if Windows is on (hd1), which tells me that grub is not reading the settings from my device.map file. ** Affects: grub (Ubuntu) Importance: Undecided Status: New -- Grub ignores device.map when booting https://bugs.launchpad.net/bugs/176249 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 114032] Re: valgrind finds "Invalid read of size 4" in dlopen
Is this actually causing problems for you, or are you just wanting valgrind to be quieter? The reason I ask is because about half the time, the problem is with valgrind so I try not to chase them unless there's actually a bug that someone is experiencing. -- valgrind finds "Invalid read of size 4" in dlopen https://bugs.launchpad.net/bugs/114032 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155572] Re: network-manager gutsy no network devices
I am getting very similar messages on a iBook rev 2.2 PPC 700Mhz -- network-manager gutsy no network devices https://bugs.launchpad.net/bugs/155572 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 174002] Re: asks termnal question on dapper->hardy upgrade
Hmm. We haven't done this with debconf before, since debconf isn't essential in Debian. However, I do notice that it's part of ubuntu- minimal, so we can probably consider that tool here. Do the dist-upgrader hints get through to someone on a server-based installation? In practice the things that need to be restarted will affect server users more than desktop users. Otherwise, it looks like we dropped the patcht to the preinst to force DEBIAN_FRONTEND to be noninteractive for glibc. If debconf and dist- upgrader aren't solutions for us, we can just restore that hack. -- asks termnal question on dapper->hardy upgrade https://bugs.launchpad.net/bugs/174002 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50722] Re: Memory problems on pthread_cancel()
> __pth_tcb_alloc (in /usr/lib/libpthread.so.20.0.27 Umm, this isn't from glibc. Marking it as invalid. Please use dpkg -S to figure out what package that comes from and file a bug against it. Or try again against the system glibc. Nothing but madness can come from running a third-party pthreads library. ** Changed in: glibc (Ubuntu) Status: Triaged => Invalid -- Memory problems on pthread_cancel() https://bugs.launchpad.net/bugs/50722 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153996] Re: libdb4.4 in gutsy breaks postgrey and subversion
Thanks for the Repo tip. I've installed the new package, now it's time to hurry up and wait. -- libdb4.4 in gutsy breaks postgrey and subversion https://bugs.launchpad.net/bugs/153996 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153996] Re: libdb4.4 in gutsy breaks postgrey and subversion
So where can we this new deb? Or when is it going to be released in the repositories? I could use the fix. -- libdb4.4 in gutsy breaks postgrey and subversion https://bugs.launchpad.net/bugs/153996 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 163453] Re: default gcc doesn't work / crt1.o missing
You need to install "build-essential" in order for general compilation to work. This isn't included on the CD or default install to save space. ** Changed in: gcc-4.1 (Ubuntu) Status: New => Invalid -- default gcc doesn't work / crt1.o missing https://bugs.launchpad.net/bugs/163453 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 121915] Re: dund in /etc/init.d/bluetooth fails with "Failed to connect to the local SDP server. Connection refused(111)" error. Solution included
This problem persists in Gutsy for dund. Adding a sleep 1 at the recommended place fixes the issue. -- pand in /etc/init.d/bluetooth fails with "Failed to connect to the local SDP server. Connection refused(111)" error. Solution included https://bugs.launchpad.net/bugs/121915 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 150192] Re: starting X on xen kernel with nvidia module loaded causes kernel panic
Yep same issue for me, I also run a dual screen so a show stopper for me too. :( -- starting X on xen kernel with nvidia module loaded causes kernel panic https://bugs.launchpad.net/bugs/150192 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 103828] Re: [needs packaging] Simple Invoices
** Changed in: ubuntu Assignee: Richard Bailey (rmjb) => (unassigned) -- [needs packaging] Simple Invoices https://bugs.launchpad.net/bugs/103828 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89322] Re: aspell-zu is broken
I built trunk for dict/zu from zaf.sf.net Subversion. Then did: aspell -a --dict-dir=. -l zu And it worked fine. I'm on Fedora 7 with aspell 0.60.5 -- aspell-zu is broken https://bugs.launchpad.net/bugs/89322 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 16075] Re: LinuxTestProject test suite 2005-04-05 fails
This is fixed in recent versions of ltp and glibc. ** Changed in: glibc (Ubuntu) Status: Confirmed => Fix Committed -- LinuxTestProject test suite 2005-04-05 fails https://bugs.launchpad.net/bugs/16075 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 22924] Re: Amd64 glibc performance patch.
These patches were rejected a number of times upstream because they hurt performance on Intel's chips. However, since then a number of compromises were found that fixed performance for the general case. Closing this bug. ** Changed in: glibc (Ubuntu) Status: New => Invalid -- Amd64 glibc performance patch. https://bugs.launchpad.net/bugs/22924 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 137364] Re: Synaptic upgrade all fails due to dependency problems
package hal-device-manager 0.5.9.1-1ubuntu8 failed to install/upgrade: dependency problems - leaving unconfigured this and a whole load of other apps badly mess up after upgrade Gutsy has been stable for last few days before this. -- Synaptic upgrade all fails due to dependency problems https://bugs.launchpad.net/bugs/137364 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85113] Re: [apport] NetworkManager crashed with signal 5 in main()
Similar problem following Gutsy update this was the first but I have maybe a dozen other Hal and gnome realted failure. shame since things were pretty smooth before latest update. -- [apport] NetworkManager crashed with signal 5 in main() https://bugs.launchpad.net/bugs/85113 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 90914] Re: initramfs cryptroot usplash support
2:1.0.5-1ubuntu1 no longer quits usplash and correctly accepts a password while it's running, but the other status messages are only echod to the console (success, failure). Those should be written to the usplash box as well. -- initramfs cryptroot usplash support https://bugs.launchpad.net/bugs/90914 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139057] Should try given password for next partition
Public bug reported: Binary package hint: cryptsetup Where multiple partitions are specified in a config file, it would be very nice if it would try the previously given password for the following partition. That way if all of the partitions are encrypted with the same key, there only needs to be one password prompt. ** Affects: cryptsetup (Ubuntu) Importance: Undecided Status: New -- Should try given password for next partition https://bugs.launchpad.net/bugs/139057 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 126810] Re: failed to initialize HAL! (Gutsy 2007-07-18 i386)
Hello, tried the update-rc.d stuff but no joy for me the problem has been there since install (amd64, tribes 5, alternative install) I get these errors when I aptitude safe-upgrade, looks like the postinstall script is borked some how will poke at it when I get the chance and post my finding. [EMAIL PROTECTED]:~$ sudo aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initialising package states... Done Building tag database... Done The following packages have been automatically kept back: linux-image-generic linux-restricted-modules-generic ttf-dejavu The following packages have been kept back: evince gimp gimp-data gimp-print gimp-python gnome-app-install libgimp2.0 linux-headers-generic pidgin pidgin-data poppler-utils tracker tracker-search-tool xsane xsane-common The following partially installed packages will be configured: gnome-power-manager gnome-session hal hal-device-manager network-manager ubuntu-desktop update-notifier 0 packages upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Setting up hal (0.5.9.1-1ubuntu7) ... * Reloading system message bus config... [ OK ] * Starting Hardware abstraction layer hald invoke-rc.d: initscript hal, action "start" failed. dpkg: error processing hal (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of gnome-power-manager: gnome-power-manager depends on hal; however: Package hal is not configured yet. dpkg: error processing gnome-power-manager (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-session: gnome-session depends on gnome-power-manager; however: Package gnome-power-manager is not configured yet. dpkg: error processing gnome-session (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of hal-device-manager: hal-device-manager depends on hal; however: Package hal is not configured yet. dpkg: error processing hal-device-manager (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of network-manager: network-manager depends on hal (>= 0.5.7.1); however: Package hal is not configured yet. dpkg: error processing network-manager (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of update-notifier: update-notifier depends on hal; however: Package hal is not configured yet. dpkg: error processing update-notifier (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of ubuntu-desktop: ubuntu-desktop depends on gnome-power-manager; however: Package gnome-power-manager is not configured yet. ubuntu-desktop depends on gnome-session; however: Package gnome-session is not configured yet. ubuntu-desktop depends on hal; however: Package hal is not configured yet. ubuntu-desktop depends on hal-device-manager; however: Package hal-device-manager is not configured yet. ubuntu-desktop depends on update-notifier; however: Package update-notifier is not configured yet. dpkg: error processing ubuntu-desktop (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: hal gnome-power-manager gnome-session hal-device-manager network-manager update-notifier ubuntu-desktop E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up hal (0.5.9.1-1ubuntu7) ... * Reloading system message bus config... [ OK ] * Starting Hardware abstraction layer hald invoke-rc.d: initscript hal, action "start" failed. dpkg: error processing hal (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of update-notifier: update-notifier depends on hal; however: Package hal is not configured yet. dpkg: error processing update-notifier (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of ubuntu-desktop: ubuntu-desktop depends on hal; however: Package hal is not configured yet. ubuntu-desktop depends on update-notifier; however: Package update-notifier is not configured yet. dpkg: error processing ubuntu-desktop (--configure): dependency problems - leaving unconfigured dpkg: dependency pr
[Bug 41454] Re: glibc isn't compiled with the system compiler
We choose the compiler to do glibc based on a small pile of things, including test results from the testsuite, speed, and features. Sometimes it'll go ahead of the pack, sometimes it will trail behind. The idea is that glibc is pretty much the one thing that if you get it wrong, everything else breaks. Because of that we treat it specially. Please note that this bug is still marked "invalid". If you'd like a longer discussion on this, I suggest switching to a mailing list. Tks, Jeff Bailey -- glibc isn't compiled with the system compiler https://bugs.launchpad.net/bugs/41454 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 64100] Re: cpufreq-applet does not show text label for 2nd CPU
The behaviour no longer exists under Feisty, I just checked and the applets load fine. ** Changed in: gnome-applets (Ubuntu) Status: Incomplete => Fix Released -- cpufreq-applet does not show text label for 2nd CPU https://bugs.launchpad.net/bugs/64100 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 125982] Re: FTBFS with /bin/dash as /bin/sh
perl (5.8.8-7ubuntu2) gutsy; urgency=low * Add missing terminating ' on makedepend.SH, fixes FTBFS with dash as /bin/sh. LP: #125982 * Modify Maintainer value to match Debian-Maintainer-Field Spec -- Jeff Bailey <[EMAIL PROTECTED]> Sat, 14 Jul 2007 10:21:40 -0400 ** Changed in: perl (Ubuntu) Status: New => Fix Released -- FTBFS with /bin/dash as /bin/sh https://bugs.launchpad.net/bugs/125982 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 125982] FTBFS with /bin/dash as /bin/sh
Public bug reported: Binary package hint: perl makedepend fails with an unterminated constant, resulting in x2p complaining that make depend hasn't been run yet. ** Affects: perl (Ubuntu) Importance: Undecided Status: New -- FTBFS with /bin/dash as /bin/sh https://bugs.launchpad.net/bugs/125982 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 49594] Re: Users can't login after session crash
Feisty 7.04 Sorry just quick notes I am experiencing a similar problem after a power outage of my desktop. I can not use fail safe also user created with the gnome user creation tool work and lots of other stuff can not mess about too long as I have deadlines from hell backing up and going for a reinstall. Just want to add a desktop that can not survive random reboots and power cycles of life hasn't really got a place in the office eco-system. IMHO Gnome devs need to address this issue with some urgency. -- Users can't login after session crash https://bugs.launchpad.net/bugs/49594 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 123178] Re: FTBFS: hppa
This patch includes: * ABI file for hppa32 * Modules listing for hppa32 * ABI file for hppa64 * Modules listing for hppa64 * Do not build ocfs2, it causes gcc to loop infinitely while building. * Do not require gcc-3.4 or gcc-3.4-hppa64. * Patch from Jeff Garzig's tree to avoid __udivdi2 in net/s2io.c. * Patch from Kyle McMartin's tree to add a stub asm-parisc/vga.h file. Hmm. It just occured to me that I removed the dependancy on gcc-3.4-hppa64 instead of changing it to gcc-4.1-hppa64. I don't have time right now to respin the patch, though, sorry. Tks, Jeff Bailey ** Attachment added: "hppa.diff" http://launchpadlibrarian.net/8264063/hppa.diff ** Summary changed: - FTBFS: hppa + FTBFS: hppa [patch] ** Description changed: Binary package hint: linux-source-2.6.22 - Version 7.14 of linux-source-2.6.22 doesn't compile. A patch will - follow. + Version 7.14 of linux-source-2.6.22 doesn't compile. -- FTBFS: hppa [patch] https://bugs.launchpad.net/bugs/123178 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 123178] FTBFS: hppa
Public bug reported: Binary package hint: linux-source-2.6.22 Version 7.14 of linux-source-2.6.22 doesn't compile. ** Affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New -- FTBFS: hppa [patch] https://bugs.launchpad.net/bugs/123178 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 122334] Re: g++ does not automatically include -lstdc++
Please provide all of what was asked for: The problem should be immediately obvious from the invocation of the command, the error message, and the few surrounding lines. This report is quite hampered by not having enough information. We can't proceed until we have this at a minimum. Tks, Jeff Bailey On 27/06/07, Ryan Hunt <[EMAIL PROTECTED]> wrote: > > textview.cpp:930: undefined reference to > `std::allocator::allocator()' > > > but when i add -lstdc++ to our .pro file, it compiles and these errors go > away. > > -- > g++ does not automatically include -lstdc++ > https://bugs.launchpad.net/bugs/122334 > You received this bug notification because you are a member of Ubuntu > Toolchain Hackers, which is a bug contact for gcc-defaults in ubuntu. > -- g++ does not automatically include -lstdc++ https://bugs.launchpad.net/bugs/122334 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 122334] Re: g++ does not automatically include -lstdc++
What we need is the log of the compiling rather than the source code. The problem should be immediately obvious from the invocation of the command, the error message, and the few surrounding lines. Tks, Jeff Bailey On 27/06/07, Ryan Hunt <[EMAIL PROTECTED]> wrote: > > I cannot reproduce using example code, I'm not proficient enough in this > stuff. If anyone else finds this issue (Ubuntu specific) please re-open. > I would submit the source code of the project, but it's not a GPL project > :( > > -- > g++ does not automatically include -lstdc++ > https://bugs.launchpad.net/bugs/122334 > You received this bug notification because you are a member of Ubuntu > Toolchain Hackers, which is a bug contact for gcc-defaults in ubuntu. > -- g++ does not automatically include -lstdc++ https://bugs.launchpad.net/bugs/122334 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
