one build per cpu (continuum 1.1)
Hi, We have a 4-cpu machine on which we run continuum 1.1. Unfortunately, it only runs one build at a time. How can we run up to 4 builds at a time? Thanks!
Re: Bug in Continuum 1.1-beta-3 ? - goals and profile seem to be locked together
On 07/02/2008, Emmanuel Venisse <[EMAIL PROTECTED]> wrote: > If you want different configurations, you have few solutions: > - Define a profile that use the most recent jdk and configure source/target > parameters on the compiler plugin in each projects > - Remove the group build definition and add a new build definition on each > project linked with a specific profile. Does not seem possible to remove the group build definition. However if one adds a new build definition, one can make that the default for the project. One can then delete the original group build from the project. > Emmanuel > > On Feb 7, 2008 1:17 PM, sebb <[EMAIL PROTECTED]> wrote: > > > Just tried updating one of the HttpComponents projects. I changed the > > profile to Java 1.4 for one of the projects, and now they all seem to > > be using 1.4. > > > > Likewise changing the goals for one of the projects affects the other two. > > > > However, changing the notifiers seems to only affect the current project. > > > > Is this tied behaviour correct? > > > > If so, how can we build some projects in the group using 1.4 and some > > using Java 5? > > >
Re: Bug in Continuum 1.1-beta-3 ? - goals and profile seem to be locked together
If you want different configurations, you have few solutions: - Define a profile that use the most recent jdk and configure source/target parameters on the compiler plugin in each projects - Remove the group build definition and add a new build definition on each project linked with a specific profile. Emmanuel On Feb 7, 2008 1:17 PM, sebb <[EMAIL PROTECTED]> wrote: > Just tried updating one of the HttpComponents projects. I changed the > profile to Java 1.4 for one of the projects, and now they all seem to > be using 1.4. > > Likewise changing the goals for one of the projects affects the other two. > > However, changing the notifiers seems to only affect the current project. > > Is this tied behaviour correct? > > If so, how can we build some projects in the group using 1.4 and some > using Java 5? >
AW: Continuum 1.1 @ Tomcat 6
I followed exactly this instructions but it doesn't work. Martin -Ursprüngliche Nachricht- Von: SlinnHawkins, Jon (ELS-CAM) [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 6. Februar 2008 13:21 An: [EMAIL PROTECTED] Betreff: RE: Continuum 1.1 @ Tomcat 6 Hi Martin I successfully installed by following the instructions on : http://docs.codehaus.org/display/MAVENUSER/Archiva+on+Tomcat HTH Jon -Original Message- From: Ritz, Martin [mailto:[EMAIL PROTECTED] Sent: 06 February 2008 12:15 To: [EMAIL PROTECTED] Subject: WG: Continuum 1.1 @ Tomcat 6 > Hi Continuum user group, > > I want to install continuum in my existing Tomcat 6 Server. > I followed the instructions on Guide to Install Continuum on Tomcat (http://maven.apache.org/continuum/docs/1.1/installation/tomcat.html). > I created an context.xml and added the libraries. > But I get still this error: > > WARN org.apache.commons.configuration.JNDIConfiguration - Internal > error > javax.naming.NameNotFoundException: Name java:comp is not bound in > this Context > > I can't get my continuum running at the tomcat due to this error. > Can anybody help my with this issue? > What I have to change/ add? > > > --- > rgds > Martin Ritz > > BTC AG - Unit Softwaredevelopment > mailto:[EMAIL PROTECTED] > This email is from Elsevier Limited, a company registered in England and Wales with company number 1982084, whose registered office is The Boulevard, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom.
RE: Continuum 1.1 @ Tomcat 6
Hi Martin I successfully installed by following the instructions on : http://docs.codehaus.org/display/MAVENUSER/Archiva+on+Tomcat HTH Jon -Original Message- From: Ritz, Martin [mailto:[EMAIL PROTECTED] Sent: 06 February 2008 12:15 To: [EMAIL PROTECTED] Subject: WG: Continuum 1.1 @ Tomcat 6 > Hi Continuum user group, > > I want to install continuum in my existing Tomcat 6 Server. > I followed the instructions on Guide to Install Continuum on Tomcat (http://maven.apache.org/continuum/docs/1.1/installation/tomcat.html). > I created an context.xml and added the libraries. > But I get still this error: > > WARN org.apache.commons.configuration.JNDIConfiguration - Internal > error > javax.naming.NameNotFoundException: Name java:comp is not bound in > this Context > > I can't get my continuum running at the tomcat due to this error. > Can anybody help my with this issue? > What I have to change/ add? > > > --- > rgds > Martin Ritz > > BTC AG - Unit Softwaredevelopment > mailto:[EMAIL PROTECTED] > This email is from Elsevier Limited, a company registered in England and Wales with company number 1982084, whose registered office is The Boulevard, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom.
WG: Continuum 1.1 @ Tomcat 6
> Hi Continuum user group, > > I want to install continuum in my existing Tomcat 6 Server. > I followed the instructions on Guide to Install Continuum on Tomcat > (http://maven.apache.org/continuum/docs/1.1/installation/tomcat.html). > I created an context.xml and added the libraries. > But I get still this error: > > WARN org.apache.commons.configuration.JNDIConfiguration - Internal error > javax.naming.NameNotFoundException: Name java:comp is not bound in this > Context > > I can't get my continuum running at the tomcat due to this error. > Can anybody help my with this issue? > What I have to change/ add? > > > --- > rgds > Martin Ritz > > BTC AG - Unit Softwaredevelopment > mailto:[EMAIL PROTECTED] >
RE: Continuum 1.1 standalone run-time error on Windows server 2003.
Thanks Wendy, I used port 8085 and that fixed it. Sameh -Original Message- From: Wendy Smoak [mailto:[EMAIL PROTECTED] Sent: Monday, January 28, 2008 5:52 PM To: [EMAIL PROTECTED] Subject: Re: Continuum 1.1 standalone run-time error on Windows server 2003. On Jan 28, 2008 6:40 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > I just installed Continuum 1.1 on Windows Server 2003 - Enterprise > Edition with Service Pack 1, by extracting all the files from > apache-continuum-1.1.zip > > Next, I run C:\continuum-1.1\bin\windows-x86-32\run.bat ... jvm 1| Caused by: java.net.BindException: Address already in use: JVM_Bind Looks like you already have something running on port 8080. You can change the port number in one of the xml files, I think you'll find it if you search for 'jetty.port', or check the docs. -- Wendy This email and any files transmitted with it are confidential, proprietary and intended solely for the individual or entity to whom they are addressed. If you have received this email in error please delete it immediately.
Re: Continuum 1.1 standalone run-time error on Windows server 2003.
On Jan 28, 2008 6:40 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > I just installed Continuum 1.1 on Windows Server 2003 - Enterprise > Edition with Service Pack 1, by extracting all the files from > apache-continuum-1.1.zip > > Next, I run C:\continuum-1.1\bin\windows-x86-32\run.bat ... jvm 1| Caused by: java.net.BindException: Address already in use: JVM_Bind Looks like you already have something running on port 8080. You can change the port number in one of the xml files, I think you'll find it if you search for 'jetty.port', or check the docs. -- Wendy
Continuum 1.1 standalone run-time error on Windows server 2003.
I just installed Continuum 1.1 on Windows Server 2003 - Enterprise Edition with Service Pack 1, by extracting all the files from apache-continuum-1.1.zip Next, I run C:\continuum-1.1\bin\windows-x86-32\run.bat When run.bat runs, it generated the following error: [ERROR] Error while deploying appserver continuum-plexus-application-1.1.jar. Does anyone know what causes this problem and how to fix it? Thanks, Here is the full output: C:\continuum-1.1\bin\windows-x86-32>run.bat wrapper | --> Wrapper Started as Console wrapper | Launching a JVM... jvm 1| Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org jvm 1| Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved. jvm 1| jvm 1| [INFO] Loading on start [role,roleHint]: [org.codehaus.plexus.naming.Naming,dataSources] jvm 1| [INFO] Loading on start [role,roleHint]: [org.codehaus.plexus.contextualizer.Contextualizer,jettyConfiguration] jvm 1| [INFO] Services will be deployed in: 'C:\continuum-1.1\bin\windows-x86-32\..\..\services'. jvm 1| [INFO] Applications will be deployed in: 'C:\continuum-1.1\bin\windows-x86-32\..\..\apps'. jvm 1| [INFO] Service Supervisor is deploying plexus-appserver-service-jetty-2.0-alpha-8. jvm 1| [DEBUG] Found 1 components to load on start jvm 1| [INFO] Loading on start [role,roleHint]: [org.codehaus.plexus.appserver.service.PlexusService,jetty] jvm 1| Jan 28, 2008 4:09:55 PM org.mortbay.http.HttpServer doStart jvm 1| INFO: Version Jetty/5.1.10 jvm 1| Jan 28, 2008 4:09:55 PM org.mortbay.util.Container start jvm 1| INFO: Started [EMAIL PROTECTED] jvm 1| [INFO] Application Supervisor is deploying continuum-plexus-application-1.1. jvm 1 | [INFO] Extracting C:\continuum-1.1\bin\windows-x86-32\..\..\apps\continuum-plexus-applicat ion-1.1.jar to 'C:\continuum-1.1\apps\continuum'. jvm 1| [INFO] Deploying application 'continuum' at 'C:\continuum-1.1\apps\continuum'. jvm 1| [INFO] Using application configurator file C:\continuum-1.1\bin\windows-x86-32\..\..\apps\continuum\conf\applicatio n.xml. jvm 1| [INFO] Using appDir = C:\continuum-1.1\bin\windows-x86-32\..\..\apps\continuum jvm 1| [DEBUG] appserver.home = C:\continuum-1.1\bin\windows-x86-32\..\.. jvm 1| [DEBUG] appserver.base = C:\continuum-1.1\bin\windows-x86-32\..\.. jvm 1| [INFO] Deploying C:\continuum-1.1\apps\continuum\webapp with context path of /continuum jvm 1| [INFO] Using standard webapp classloader for webapp. jvm 1| [INFO] Deploying appserver 'continuum'. jvm 1| [INFO] Adding HTTP listener on *8080 jvm 1| Jan 28, 2008 4:10:06 PM org.mortbay.util.ThreadedServer start jvm 1| WARNING: Failed to start: [EMAIL PROTECTED]:8080 jvm 1| [ERROR] Error while deploying appserver continuum-plexus-application-1.1.jar. jvm 1| org.codehaus.plexus.appserver.ApplicationServerException: Error in the app server lifecycle post-app-container-init-service-call phase. jvm 1| at org.codehaus.plexus.appserver.application.deploy.DefaultApplicationDeplo yer.deployJar(DefaultApplicationDeployer.java:119) jvm 1| at org.codehaus.plexus.appserver.application.deploy.DefaultApplicationDeplo yer.deploy(DefaultApplicationDeployer.java:88) jvm 1| at org.codehaus.plexus.appserver.lifecycle.phase.ApplicationDeploymentPhase $1.onJarDiscovered(ApplicationDeploymentPhase.java:44) jvm 1| at org.codehaus.plexus.appserver.supervisor.DefaultSupervisor.scanDirectory (DefaultSupervisor.java:100) jvm 1| at org.codehaus.plexus.appserver.supervisor.DefaultSupervisor.scan(DefaultS upervisor.java:73) jvm 1| at org.codehaus.plexus.appserver.lifecycle.phase.ApplicationDeploymentPhase .execute(ApplicationDeploymentPhase.java:58) jvm 1| at org.codehaus.plexus.appserver.DefaultApplicationServer.start(DefaultAppl icationServer.java:218) jvm 1| at org.codehaus.plexus.personality.plexus.lifecycle.phase.StartPhase.execut e(StartPhase.java:33) jvm 1| at org.codehaus.plexus.lifecycle.AbstractLifecycleHandler.start(AbstractLif ecycleHandler.java:128) jvm 1| at org.codehaus.plexus.component.manager.AbstractComponentManager.startComp onentLifecycle(AbstractComponentManager.java:142) jvm 1| at org.codehaus.plexus.component.manager.AbstractComponentManager.createCom ponentInstance(AbstractComponentManager.java:132) jvm 1| at org.codehaus.plexus.component.manager.ClassicSingletonComponentManager.g etComponent(ClassicSingletonComponentManager.java:90) jvm 1| at org.codehaus.plexus.DefaultComponentLookupManager.lookup(DefaultComponen tLookupManager.java:147) jvm 1| at org.codehaus.plexus.DefaultComponentLookupManager.lookup(DefaultComponen tLookupManager.java:69) jvm 1| at org.codehaus.plexus.DefaultPlexusContainer.lookup(DefaultPlexusContainer .java:297) jvm 1| at org.co
RE: Continuum 1.1 standalone on WindowsXP doesn't send email?
Hi Emmanuel, The problem is resolved. It was as you specified earlier when you asked: > 1- are you sure your smtp server use ssl? When I updated :\continuum-1.1\conf\plexus.xml, I took the default settings which uses ssl as follow: mail.smtp.socketFactory.class javax.net.ssl.SSLSocketFactory And after, I set the "alwaysSend" property to true, when the build run, I see the following error messages: jvm 1| DEBUG: setDebug: JavaMail version 1.4ea jvm 1| DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc] jvm 1| DEBUG SMTP: useEhlo true, useAuth true jvm 1| DEBUG SMTP: trying to connect to host "mail.fairisaac.com", port 25, isSSL false jvm 1| DEBUG SMTP: exception reading response: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection? jvm 1| 2008-01-25 14:12:13,713 [pool-1-thread-1] ERROR org.apache.maven.continuum.notification.ContinuumNotificationDispatcher: default - Error while trying to use the mail notifier. jvm 1| org.codehaus.plexus.notification.NotificationException: Exception while sending message. I verified that we are not using ssl, followed by removing the above ssl property segment from \continuum-1.1\conf\plexus.xml, so now after the build is complete, Continuum is able to successfully send email with the build results. Thanks, Sameh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Emmanuel Venisse Sent: Friday, January 25, 2008 12:57 AM To: [EMAIL PROTECTED] Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? You can configure it in .../WEB-INF/classes/META-INF/plexus/application.xml You'll find in this file some "alwaysSend" parameters Emmanuel On Jan 25, 2008 2:55 AM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > I found the following info from the Continuum screen that launches when > I click on C:\continuum-1.1\bin\windows-x86-32\run.bat > > > jvm 1| 2008-01-24 17:28:14,982 [pool-1-thread-1] INFO > org.codehaus.plexus.notification.notifier.Notifier:msn - Same state, > not sending message. > jvm 1| 2008-01-24 17:28:14,998 [pool-1-thread-1] INFO > org.codehaus.plexus.notification.notifier.Notifier:mail - Same state, > not sending message. > > So, is there is any way to force it to send an email. We need to know > the results of the build? And I do not know if the email part is working > or not yet? > > Sameh > > -Original Message- > From: Tawfik, Sameh E [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 24, 2008 5:23 PM > To: [EMAIL PROTECTED] > Subject: RE: Continuum 1.1 standalone on WindowsXP doesn't send email? > > > We're using Microsoft Exchange Server, so when I add a Notifier which > choice to choose? is it mail, or MSN? > > Sameh > > -Original Message- > From: Tawfik, Sameh E [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 24, 2008 4:41 PM > To: [EMAIL PROTECTED] > Subject: RE: Continuum 1.1 standalone on WindowsXP doesn't send email? > > > > Emmanuel, > > I'm not sure if our server uses ssl? But I'm working on finding out. > > And, I need Continuum to always send email to a specific email group, > every time it runs a build whether it's successful or not. I'm hoping > Continuum can do that without going through too many steps? > > Also, I noticed whenever I run a build; the icons do not change unless I > press F5 to refresh the screen! So, is there is a way, where I can have > Continuum automatically updates the build icons? So it would be easy to > visually know that the build is complete? Do I need to modify or reset > something? I worked with other auto build tools, where whenever you run > a build you'd see the icon is moving and then it change its shape to > indicate that the build is done. > > Finally, do you know of any example that I can view to see how the email > section is set in the C:\continuum-1.1\conf\plexus.xml file? That would > help a lot. > > Thanks, > > Sameh > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Emmanuel Venisse > Sent: Thursday, January 24, 2008 3:29 PM > To: [EMAIL PROTECTED] > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > 1- are you sure your smtp server use ssl? > 2- Continuum doesn't send a mail for each build by default but only when > the > project state change to prevent some spam > > Emmanuel > > On Jan 25, 2008 12:23 AM, Tawfik, Sameh E <[EMAIL PROTECTED]> > wrote: > > > > > > > I opened the correct file
Re: Continuum 1.1 standalone on WindowsXP doesn't send email?
You can configure it in .../WEB-INF/classes/META-INF/plexus/application.xml You'll find in this file some "alwaysSend" parameters Emmanuel On Jan 25, 2008 2:55 AM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > I found the following info from the Continuum screen that launches when > I click on C:\continuum-1.1\bin\windows-x86-32\run.bat > > > jvm 1| 2008-01-24 17:28:14,982 [pool-1-thread-1] INFO > org.codehaus.plexus.notification.notifier.Notifier:msn - Same state, > not sending message. > jvm 1| 2008-01-24 17:28:14,998 [pool-1-thread-1] INFO > org.codehaus.plexus.notification.notifier.Notifier:mail - Same state, > not sending message. > > So, is there is any way to force it to send an email. We need to know > the results of the build? And I do not know if the email part is working > or not yet? > > Sameh > > -Original Message- > From: Tawfik, Sameh E [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 24, 2008 5:23 PM > To: [EMAIL PROTECTED] > Subject: RE: Continuum 1.1 standalone on WindowsXP doesn't send email? > > > We're using Microsoft Exchange Server, so when I add a Notifier which > choice to choose? is it mail, or MSN? > > Sameh > > -Original Message- > From: Tawfik, Sameh E [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 24, 2008 4:41 PM > To: [EMAIL PROTECTED] > Subject: RE: Continuum 1.1 standalone on WindowsXP doesn't send email? > > > > Emmanuel, > > I'm not sure if our server uses ssl? But I'm working on finding out. > > And, I need Continuum to always send email to a specific email group, > every time it runs a build whether it's successful or not. I'm hoping > Continuum can do that without going through too many steps? > > Also, I noticed whenever I run a build; the icons do not change unless I > press F5 to refresh the screen! So, is there is a way, where I can have > Continuum automatically updates the build icons? So it would be easy to > visually know that the build is complete? Do I need to modify or reset > something? I worked with other auto build tools, where whenever you run > a build you'd see the icon is moving and then it change its shape to > indicate that the build is done. > > Finally, do you know of any example that I can view to see how the email > section is set in the C:\continuum-1.1\conf\plexus.xml file? That would > help a lot. > > Thanks, > > Sameh > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Emmanuel Venisse > Sent: Thursday, January 24, 2008 3:29 PM > To: [EMAIL PROTECTED] > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > 1- are you sure your smtp server use ssl? > 2- Continuum doesn't send a mail for each build by default but only when > the > project state change to prevent some spam > > Emmanuel > > On Jan 25, 2008 12:23 AM, Tawfik, Sameh E <[EMAIL PROTECTED]> > wrote: > > > > > > > I opened the correct file, and made the following modification, > > restarted Continuum, followed by logging as an admin, run a build, but > > still Continuum is not sending any email? > > > > > > > >mail/Session > >javax.mail.Session > > > > > >mail.smtp.host > >STPMSGMxyz.corp.fairisaac.com > > > > > >mail.smtp.port > >25 > > > > > > > >mail.smtp.auth > >true > > > > > >mail.smtp.user > >SamehTawfik > > > > > >password > >x > > > > > >mail.smtp.debug > > true > > > > > >mail.smtp.starttls.enable > >true > > > > > >mail.smtp.socketFactory.class > >javax.net.ssl.SSLSocketFactory > > > > > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On > > Behalf Of Emmanuel Venisse > > Sent: Thursday, January 24, 2008 2:56 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > > > You looked at the
Re: Continuum 1.1 standalone on WindowsXP doesn't send email?
On Jan 24, 2008 5:41 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > Also, I noticed whenever I run a build; the icons do not change unless I > press F5 to refresh the screen! So, is there is a way, where I can have > Continuum automatically updates the build icons? The page will refresh automatically, but perhaps not as often as you'd like. Right click and view source, you'll see: I think that's every 5 minutes. You can probably find the file(s) and change it (let us know if you need help finding it). (We should make it configurable...) -- Wendy
RE: Continuum 1.1 standalone on WindowsXP doesn't send email?
Emmanuel, I'm not sure if our server uses ssl? But I'm working on finding out. And, I need Continuum to always send email to a specific email group, every time it runs a build whether it's successful or not. I'm hoping Continuum can do that without going through too many steps? Also, I noticed whenever I run a build; the icons do not change unless I press F5 to refresh the screen! So, is there is a way, where I can have Continuum automatically updates the build icons? So it would be easy to visually know that the build is complete? Do I need to modify or reset something? I worked with other auto build tools, where whenever you run a build you'd see the icon is moving and then it change its shape to indicate that the build is done. Finally, do you know of any example that I can view to see how the email section is set in the C:\continuum-1.1\conf\plexus.xml file? That would help a lot. Thanks, Sameh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Emmanuel Venisse Sent: Thursday, January 24, 2008 3:29 PM To: [EMAIL PROTECTED] Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? 1- are you sure your smtp server use ssl? 2- Continuum doesn't send a mail for each build by default but only when the project state change to prevent some spam Emmanuel On Jan 25, 2008 12:23 AM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > > I opened the correct file, and made the following modification, > restarted Continuum, followed by logging as an admin, run a build, but > still Continuum is not sending any email? > > > >mail/Session >javax.mail.Session > > >mail.smtp.host >STPMSGMxyz.corp.fairisaac.com > > >mail.smtp.port >25 > > > >mail.smtp.auth >true > > >mail.smtp.user >SamehTawfik > > >password >x > > >mail.smtp.debug >true > > >mail.smtp.starttls.enable >true > > >mail.smtp.socketFactory.class >javax.net.ssl.SSLSocketFactory > > > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Emmanuel Venisse > Sent: Thursday, January 24, 2008 2:56 PM > To: [EMAIL PROTECTED] > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > You looked at the wrong file, It should be > C:\continuum-1.1\conf\plexus.xml and the file is similar to this one : > https://svn.apache.org/repos/asf/maven/continuum/branches/continuum-1.x/ > continuum-plexus-runtime/src/conf/plexus.xml > > On Jan 24, 2008 11:51 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> > wrote: > > > > > I just opened C:\continuum-1.1\apps\continuum\conf\plexus.xml and it > is > > empty! > > > > Could you let me know what the required syntax to add to this file? > > > > Thanks, > > > >Same > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On > > Behalf Of Emmanuel Venisse > > Sent: Thursday, January 24, 2008 2:37 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > > > Do you have configured your smtp server in conf/plexus.xml? > > > > > > On Jan 24, 2008 11:25 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> > > wrote: > > > > > > > > Hi, > > > > > > According to the help documentation, the following is all I need to > > have > > > Continuum send an email when it done from running a build, but > > Continuum > > > does not send any email as it supposed to when it's done from a > build! > > > > > > I set the following under the Notifiers section of the project, but > > > nothing happens? > > > > > > Type Recipient Events > > > From > > > mail [EMAIL PROTECTED] Success/Failures/Warnings/Errors > > > User > > > > > > > > > Sameh > > > > > > This email and any files transmitted with it are confidential, > > proprietary > > > and intended solely for the individual or entity to whom they are > > > ad
Re: Continuum 1.1 standalone on WindowsXP doesn't send email?
1- are you sure your smtp server use ssl? 2- Continuum doesn't send a mail for each build by default but only when the project state change to prevent some spam Emmanuel On Jan 25, 2008 12:23 AM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > > I opened the correct file, and made the following modification, > restarted Continuum, followed by logging as an admin, run a build, but > still Continuum is not sending any email? > > > >mail/Session >javax.mail.Session > > >mail.smtp.host >STPMSGMxyz.corp.fairisaac.com > > >mail.smtp.port >25 > > > >mail.smtp.auth >true > > >mail.smtp.user >SamehTawfik > > >password >x > > >mail.smtp.debug >true > > >mail.smtp.starttls.enable >true > > >mail.smtp.socketFactory.class >javax.net.ssl.SSLSocketFactory > > > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Emmanuel Venisse > Sent: Thursday, January 24, 2008 2:56 PM > To: [EMAIL PROTECTED] > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > You looked at the wrong file, It should be > C:\continuum-1.1\conf\plexus.xmland the file is similar to this one : > https://svn.apache.org/repos/asf/maven/continuum/branches/continuum-1.x/ > continuum-plexus-runtime/src/conf/plexus.xml > > On Jan 24, 2008 11:51 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> > wrote: > > > > > I just opened C:\continuum-1.1\apps\continuum\conf\plexus.xml and it > is > > empty! > > > > Could you let me know what the required syntax to add to this file? > > > > Thanks, > > > >Same > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On > > Behalf Of Emmanuel Venisse > > Sent: Thursday, January 24, 2008 2:37 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > > > Do you have configured your smtp server in conf/plexus.xml? > > > > > > On Jan 24, 2008 11:25 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> > > wrote: > > > > > > > > Hi, > > > > > > According to the help documentation, the following is all I need to > > have > > > Continuum send an email when it done from running a build, but > > Continuum > > > does not send any email as it supposed to when it's done from a > build! > > > > > > I set the following under the Notifiers section of the project, but > > > nothing happens? > > > > > > Type Recipient Events > > > From > > > mail [EMAIL PROTECTED] Success/Failures/Warnings/Errors > > > User > > > > > > > > > Sameh > > > > > > This email and any files transmitted with it are confidential, > > proprietary > > > and intended solely for the individual or entity to whom they are > > > addressed. > > > If you have received this email in error please delete it > immediately. > > > > > > > > This email and any files transmitted with it are confidential, > proprietary > > and intended solely for the individual or entity to whom they are > > addressed. > > If you have received this email in error please delete it immediately. > > > > > This email and any files transmitted with it are confidential, proprietary > and intended solely for the individual or entity to whom they are > addressed. > If you have received this email in error please delete it immediately. > >
RE: Continuum 1.1 standalone on WindowsXP doesn't send email?
I opened the correct file, and made the following modification, restarted Continuum, followed by logging as an admin, run a build, but still Continuum is not sending any email? mail/Session javax.mail.Session mail.smtp.host STPMSGMxyz.corp.fairisaac.com mail.smtp.port 25 mail.smtp.auth true mail.smtp.user SamehTawfik password x mail.smtp.debug true mail.smtp.starttls.enable true mail.smtp.socketFactory.class javax.net.ssl.SSLSocketFactory -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Emmanuel Venisse Sent: Thursday, January 24, 2008 2:56 PM To: [EMAIL PROTECTED] Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? You looked at the wrong file, It should be C:\continuum-1.1\conf\plexus.xmland the file is similar to this one : https://svn.apache.org/repos/asf/maven/continuum/branches/continuum-1.x/ continuum-plexus-runtime/src/conf/plexus.xml On Jan 24, 2008 11:51 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > I just opened C:\continuum-1.1\apps\continuum\conf\plexus.xml and it is > empty! > > Could you let me know what the required syntax to add to this file? > > Thanks, > >Same > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Emmanuel Venisse > Sent: Thursday, January 24, 2008 2:37 PM > To: [EMAIL PROTECTED] > Subject: Re: Continuum 1.1 standalone on WindowsXP doesn't send email? > > Do you have configured your smtp server in conf/plexus.xml? > > > On Jan 24, 2008 11:25 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> > wrote: > > > > > Hi, > > > > According to the help documentation, the following is all I need to > have > > Continuum send an email when it done from running a build, but > Continuum > > does not send any email as it supposed to when it's done from a build! > > > > I set the following under the Notifiers section of the project, but > > nothing happens? > > > > Type Recipient Events > > From > > mail [EMAIL PROTECTED] Success/Failures/Warnings/Errors > > User > > > > > > Sameh > > > > This email and any files transmitted with it are confidential, > proprietary > > and intended solely for the individual or entity to whom they are > > addressed. > > If you have received this email in error please delete it immediately. > > > > > This email and any files transmitted with it are confidential, proprietary > and intended solely for the individual or entity to whom they are > addressed. > If you have received this email in error please delete it immediately. > > This email and any files transmitted with it are confidential, proprietary and intended solely for the individual or entity to whom they are addressed. If you have received this email in error please delete it immediately.
Re: Continuum 1.1 standalone on WindowsXP doesn't send email?
Do you have configured your smtp server in conf/plexus.xml? On Jan 24, 2008 11:25 PM, Tawfik, Sameh E <[EMAIL PROTECTED]> wrote: > > Hi, > > According to the help documentation, the following is all I need to have > Continuum send an email when it done from running a build, but Continuum > does not send any email as it supposed to when it's done from a build! > > I set the following under the Notifiers section of the project, but > nothing happens? > > Type Recipient Events > From > mail [EMAIL PROTECTED] Success/Failures/Warnings/Errors > User > > > Sameh > > This email and any files transmitted with it are confidential, proprietary > and intended solely for the individual or entity to whom they are > addressed. > If you have received this email in error please delete it immediately. > >
Continuum 1.1 standalone on WindowsXP doesn't send email?
Hi, According to the help documentation, the following is all I need to have Continuum send an email when it done from running a build, but Continuum does not send any email as it supposed to when it's done from a build! I set the following under the Notifiers section of the project, but nothing happens? Type Recipient Events >From mail [EMAIL PROTECTED] Success/Failures/Warnings/Errors User Sameh This email and any files transmitted with it are confidential, proprietary and intended solely for the individual or entity to whom they are addressed. If you have received this email in error please delete it immediately.
Continuum 1.1 slow to startup in standalone config
Hi all, I am upgrading from continuum 1.0.3 to continuum 1.1. I have manually migrated all my 112 projects and build definitions to continuum 1.1 8-) Now, when I start continuum it takes about 30 minutes to start up. When I initially installed continuum 1.1 it only took a few seconds to start up. But after I added all me 112 projects I noticed this slow startup behavior. I am running continuum 1.1 in a standalone configuration on Redhat Linux. I am using JDK 1.5.0_14-b03. Continuum 1.0.3 works just fine on the same box under JDK 1.4.2. It starts up in seconds with all my 112 projects. Has anyone observed similar issues? Any workarounds or configuration tweaks? Thanks in advance, Oliver Enseling NOTICE: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information of Motricity. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
Re: Problem to send email (Validation user) with Continuum 1.1 final
Ok Wendy, Usualy I create the user because of the permission. I understood, thank you for return. - Original Message - From: "Wendy Smoak" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, December 28, 2007 12:57 AM Subject: Re: Problem to send email (Validation user) with Continuum 1.1 final On Dec 27, 2007 11:52 AM, Claudio Ranieri <[EMAIL PROTECTED]> wrote: But it isn´t intuitive. Could you add parameter email.validation.required=false in security.properties (trunk version)? Other solution is add automatically send email in creating user. IMO it's slightly broken at the moment. If you (as an admin) manually create a user, he shouldn't *also* have to validate by receiving and clicking a link in an email. That's what the issue I linked to is about. I consider self-registration (which works) to be the normal use case, and manually creating users to be the alternate. So the current defaults make sense to me. Are you more likely to create a user than to have them self-register? -- Wendy
Re: Problem to send email (Validation user) with Continuum 1.1 final
Ok Wendy, But it isn´t intuitive. Could you add parameter email.validation.required=false in security.properties (trunk version)? Other solution is add automatically send email in creating user. Thanks - Original Message - From: "Wendy Smoak" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 27, 2007 4:07 PM Subject: Re: Problem to send email (Validation user) with Continuum 1.1 final On Dec 27, 2007 9:45 AM, Claudio Ranieri <[EMAIL PROTECTED]> wrote: When I create a new user, the user doesn´t receive email until I click in Resend Validation. Is it a bug? Not as far as I know. Creating a user does not automatically send a validation email. See also http://jira.codehaus.org/browse/REDBACK-118 . -- Wendy
Re: Problem to send email (Validation user) with Continuum 1.1 final
On Dec 27, 2007 9:45 AM, Claudio Ranieri <[EMAIL PROTECTED]> wrote: > When I create a new user, the user doesn´t receive email until I click in > Resend Validation. > Is it a bug? Not as far as I know. Creating a user does not automatically send a validation email. See also http://jira.codehaus.org/browse/REDBACK-118 . -- Wendy
Re: Problem to send email (Validation user) with Continuum 1.1 final
Hi Wendy, When I create a new user, the user doesn´t receive email until I click in Resend Validation. Is it a bug? Thanks - Original Message - From: "Claudio Ranieri" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, December 26, 2007 9:19 AM Subject: Re: Problem to send email (Validation user) with Continuum 1.1 final Great Wendy, Thanks! - Original Message - From: "Wendy Smoak" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, December 23, 2007 4:03 PM Subject: Re: Problem to send email (Validation user) with Continuum 1.1 final On Dec 21, 2007 9:41 AM, Claudio Ranieri <[EMAIL PROTECTED]> wrote: But you creating a sample file helps a lot. http://jira.codehaus.org/browse/CONTINUUM-1612 I put email.from.name, email.from.address and email.validation.subject in the sample file. Thanks, -- Wendy
Re: Problem to send email (Validation user) with Continuum 1.1 final
Great Wendy, Thanks! - Original Message - From: "Wendy Smoak" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, December 23, 2007 4:03 PM Subject: Re: Problem to send email (Validation user) with Continuum 1.1 final On Dec 21, 2007 9:41 AM, Claudio Ranieri <[EMAIL PROTECTED]> wrote: But you creating a sample file helps a lot. http://jira.codehaus.org/browse/CONTINUUM-1612 I put email.from.name, email.from.address and email.validation.subject in the sample file. Thanks, -- Wendy
Re: Problem to send email (Validation user) with Continuum 1.1 final
On Dec 21, 2007 5:06 AM, Claudio Ranieri <[EMAIL PROTECTED]> wrote: > I did a test with file security.properties in /path/to/continuum/conf/ and > work out. > As sugestion, the Continuum Team can add the file > /path/to/continuum/conf/security.properties in next release of Continuum. We should definitely document it better, and possibly leave a sample file in /conf, but it doesn't need to be there unless you're overriding the defaults. > The Continuum Team can unify all sender email. Today, there are 2 config in > > /path/to/continuum/apps/continuum/webapp/WEB-INF/classes/META-INF/plexus/application.xml > (parameters from-mailbox and from-name) >and > /path/to/continuum/conf/security.properties Probably not, since the first file comes from Continuum, and the second from Redback, a separate project that gets included into Continuum to handle authenticataion and role-based authorization. -- Wendy
Re: Problem to send email (Validation user) with Continuum 1.1 final
On 12/20/07, Claudio Ranieri <[EMAIL PROTECTED]> wrote: > I looked for this file in Continuum 1.1 final, but I did´nt find > security.properties in /path/to/continuum/conf/ > Using grep I found the file security.properties in > /path/to/continuum/apps/continuum/webapp/WEB-INF/classes/org/apache/maven/continuum/security.properties > I added in this file this lines: You can create /path/to/continuum/conf/security.properties and put your changes there-- they should override the ones down in the webapp, and it will make upgrades easier. -- Wendy
Re: Problem to login in Continuum 1.1 final with Internet Explorer
You're not alone with this problem but we don't know what's happen for the moment. Emmanuel > Hi, > > I installed the Continuum 1.1 final in a linux machine. > When I try do login (as admin) I am redirect to home. > This happen with Internet Explorer. In firefox work out. > I am using correct user and password. > What´s the problem? > I cleaned all cookies, but problem persist ... > Help me. > > Thanks > > > > > > - > Abra sua conta no Yahoo! Mail, o único sem limite de espaço para > armazenamento!
Problem with surefire-reports in Continuum 1.1 final
Hi, I am using Continuum 1.1 final, Maven 2.0.7, Java 1.5.0_06 and WindowsXP I added a M2 project in Continuum, but in result of build I got: + Error stacktraces are turned on. [INFO] Scanning for projects... [INFO] [INFO] Building Sincronismo [INFO]task-segment: [clean, install] [INFO] [INFO] [clean:clean] [INFO] Deleting directory C:\continuum\work\6\target [INFO] [resources:resources] [INFO] Using default encoding to copy filtered resources. [INFO] [compiler:compile] [INFO] Compiling 8 source files to C:\continuum\work\6\target\classes [INFO] [resources:testResources] [INFO] Using default encoding to copy filtered resources. [INFO] [compiler:testCompile] [INFO] Compiling 1 source file to C:\continuum\work\6\target\test-classes [INFO] [surefire:test] [INFO] Surefire report directory: C:\continuum\work\6\target\surefire-reports [INFO] [ERROR] BUILD ERROR [INFO] [INFO] Error creating properties files for forking; nested exception is java.io.IOException: O sistema não pode encontrar o caminho especificado [INFO] [INFO] Trace org.apache.maven.lifecycle.LifecycleExecutionException: Error creating properties files for forking; nested exception is java.io.IOException: O sistema não pode encontrar o caminho especificado at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:564) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle(DefaultLifecycleExecutor.java:480) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycleExecutor.java:459) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures(DefaultLifecycleExecutor.java:311) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(DefaultLifecycleExecutor.java:278) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:143) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:334) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:125) at org.apache.maven.cli.MavenCli.main(MavenCli.java:280) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: org.apache.maven.plugin.MojoExecutionException: Error creating properties files for forking; nested exception is java.io.IOException: O sistema não pode encontrar o caminho especificado at org.apache.maven.plugin.surefire.SurefirePlugin.execute(SurefirePlugin.java:402) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.java:443) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:539) ... 16 more Caused by: org.apache.maven.surefire.booter.SurefireBooterForkException: Error creating properties files for forking; nested exception is java.io.IOException: O sistema não pode encontrar o caminho especificado at org.apache.maven.surefire.booter.SurefireBooter.fork(SurefireBooter.java:519) at org.apache.maven.surefire.booter.SurefireBooter.forkSuites(SurefireBooter.java:412) at org.apache.maven.surefire.booter.SurefireBooter.runSuitesForkOnce(SurefireBooter.java:312) at org.apache.maven.surefire.booter.SurefireBooter.run(SurefireBooter.java:202) at org.apache.maven.plugin.surefire.SurefirePlugin.execute(SurefirePlugin.java:398) ... 18 more Caused by: java.io.IOException: O sistema não pode encontrar o caminho especificado at java.io.WinNTFileSystem.createFileExclusively(Native Method) at java.io.File.checkAndCreate(File.java:1345) at java.io.File.createTempFile(File.java:1434) at java.io.File.createTempFile(File.java:1471) at org.apache.maven.surefire.booter.SurefireBooter.writePropertiesFile(SurefireBooter.java:450) at org.apache.maven.surefire.booter.SurefireBooter.fork(SurefireBooter.java:511) ... 22 more [INFO] [INFO] Total time: 4 seconds [INFO] Finished at: Thu Dec 13 11:25:58 BRST 2007 [INFO] Final Memory: 6M/14M [INFO] The maven didn´t find the directory C:\continuum\work\6\target
Re: Scheduler bug, Continuum 1.1 (MySQL)
Ups. :) Thank you. Ingo Emmanuel Venisse schrieb: Yes, your cron expression is invalid :) It must be : 0 0/30 8-18 ? * MON-FRI The doc say this: "Pay attention to the effects of '?' and '*' in the day-of-week and day-of-month fields!" http://www.opensymphony.com/quartz/api/org/quartz/CronTrigger.html Emmanuel Hi, i ceated my own "work time" scheduler. 0 0/30 8-18 * * 1-5 But he doesn't accept the 1-5 value. It's the same with MON-FRI. Continuum says "invalid cron expression". Is the "day of week" value working for someone? Ingo -- CRM Products Development - EIM CAS Software AG Well informed. Always and everywhere. www.cas.de CAS Software AG - Wilhelm-Schickard-Straße 10-12 - 76131 Karlsruhe - Telefon +49 721 9638-0 - www.cas.de - Impressum und AGB Vorstand: Martin Hubschneider (Vorsitz) - Ludwig Neer - Frank Widmayer Aufsichtsrat: Dr. Dr. Jörg Maurer (Vorsitz) - Prof. Dr. Peter Lockemann - Dr. habil. Karl Schlagenhauf Amtsgericht Mannheim - Handelsregister-Nr.: HRB 108751 - UID Nr.: DE143593148
Re: continuum 1.1 and guest user
Thanks for the clue! Somehow because I didn't see 'guest' in the 1.1 version, I thought I first had to login as 'guest', but didn't know the password. Now I see that although it doesn't show me logged in as guest, I still have guest permissions. On Dec 8, 2007 9:04 AM, Wendy Smoak <[EMAIL PROTECTED]> wrote: > > On Dec 6, 2007 3:22 PM, deckrider+mvn <[EMAIL PROTECTED]> wrote: > > I would like to just have 1-2 admins and everyone else can be guest > > for continuum 1.1. > > > > This seemed possible in continuum 1.0, but I must be missing some step > > to know how to do it with continuum 1.1. After I log in the first > > time to set up admin, I'm still not understanding how to log in so as > > to become guest (as well as how to give guest more privs). > > Log in as admin, then click the "Users" button at the left, choose the > guest user, and grant it the roles you want it to have. > > Guest is the unauthenticated user, so you don't log in to become > guest. For example, if you make the guest user a global project > developer, then anyone with access to the server will be able to add > projects, kick off builds, etc. Is that what you want? > > -- > Wendy > -- ASCII ribbon campaign: () against HTML email /\ against Microsoft attachments Information: http://www.expita.com/nomime.html
Re: continuum 1.1 and guest user
On Dec 6, 2007 3:22 PM, deckrider+mvn <[EMAIL PROTECTED]> wrote: > I would like to just have 1-2 admins and everyone else can be guest > for continuum 1.1. > > This seemed possible in continuum 1.0, but I must be missing some step > to know how to do it with continuum 1.1. After I log in the first > time to set up admin, I'm still not understanding how to log in so as > to become guest (as well as how to give guest more privs). Log in as admin, then click the "Users" button at the left, choose the guest user, and grant it the roles you want it to have. Guest is the unauthenticated user, so you don't log in to become guest. For example, if you make the guest user a global project developer, then anyone with access to the server will be able to add projects, kick off builds, etc. Is that what you want? -- Wendy
continuum 1.1 and guest user
I would like to just have 1-2 admins and everyone else can be guest for continuum 1.1. This seemed possible in continuum 1.0, but I must be missing some step to know how to do it with continuum 1.1. After I log in the first time to set up admin, I'm still not understanding how to log in so as to become guest (as well as how to give guest more privs). Thanks!
Re: continuum 1.1 together with archiva 1.0 on tomcat 5.5
cool! i needed to change the mysql database charset to latin1 (see other discussion on mysql 5.0) thanks! regards ossi Brett Porter schrieb: yes, and yes. in fact, I would recommend sharing the user database connection. On 04/12/2007, ossi petz <[EMAIL PROTECTED]> wrote: Hallo thanks for all replies. the continuum settings are ok since it would run without archiva. the error appears on archiva is 'hot deployed' (start archiva with tomcat manager while continuum is running). since the database is a container resource, can i use mysql instead? oh wiki! http://docs.codehaus.org/display/CONTINUUMUSER/Continuum+on+MySQL :-) can archiva and continuum use the same user-database? (it all looks so similar) i will try using mysql and come back later. thanks ossi Brett Porter schrieb: from what I can see, the error is all about the continuum database - and the derby problem shouldn't be a concern since it's all in the one JVM. I think the settings for the continuum database should be double checked. On 04/12/2007, Ingo Siebert <[EMAIL PROTECTED]> wrote: Hi Ossi, I posted the same problem today, but i don't use archiva. If you find a solution, please let me know. :) Ingo ossi petz schrieb: Hallo I tried to install both archiva and continuum on the same tomcat 5.5.25 / Java 1.5 When i only install continuum things work fine. When i only install archiva things work too. When i install both continuum and archiva i end up with apache derby exceptions. archiva starts (i guess its because of its arc..< con..), continuum cant connect / create the database (see attached stacktrace). there is only a 'see next error'. i dont fully get the source of the problem. do i need to copy the derby.jar into each application? or should i use different resource names in the container configuration? any hints would be great! thanks ossi
Re: continuum 1.1 together with archiva 1.0 on tomcat 5.5
Hallo thanks for all replies. the continuum settings are ok since it would run without archiva. the error appears on archiva is 'hot deployed' (start archiva with tomcat manager while continuum is running). since the database is a container resource, can i use mysql instead? oh wiki! http://docs.codehaus.org/display/CONTINUUMUSER/Continuum+on+MySQL :-) can archiva and continuum use the same user-database? (it all looks so similar) i will try using mysql and come back later. thanks ossi Brett Porter schrieb: from what I can see, the error is all about the continuum database - and the derby problem shouldn't be a concern since it's all in the one JVM. I think the settings for the continuum database should be double checked. On 04/12/2007, Ingo Siebert <[EMAIL PROTECTED]> wrote: Hi Ossi, I posted the same problem today, but i don't use archiva. If you find a solution, please let me know. :) Ingo ossi petz schrieb: Hallo I tried to install both archiva and continuum on the same tomcat 5.5.25 / Java 1.5 When i only install continuum things work fine. When i only install archiva things work too. When i install both continuum and archiva i end up with apache derby exceptions. archiva starts (i guess its because of its arc..< con..), continuum cant connect / create the database (see attached stacktrace). there is only a 'see next error'. i dont fully get the source of the problem. do i need to copy the derby.jar into each application? or should i use different resource names in the container configuration? any hints would be great! thanks ossi
Re: continuum 1.1 together with archiva 1.0 on tomcat 5.5
from what I can see, the error is all about the continuum database - and the derby problem shouldn't be a concern since it's all in the one JVM. I think the settings for the continuum database should be double checked. On 04/12/2007, Ingo Siebert <[EMAIL PROTECTED]> wrote: > Hi Ossi, > > I posted the same problem today, but i don't use archiva. > If you find a solution, please let me know. :) > > Ingo > > ossi petz schrieb: > > Hallo > > > > I tried to install both archiva and continuum on the same tomcat 5.5.25 > > / Java 1.5 > > > > When i only install continuum things work fine. When i only install > > archiva things work too. > > > > When i install both continuum and archiva i end up with apache derby > > exceptions. archiva starts (i guess its because of its arc..< con..), > > continuum cant connect / create the database (see attached stacktrace). > > > > there is only a 'see next error'. i dont fully get the source of the > > problem. do i need to copy the derby.jar into each application? or > > should i use different resource names in the container configuration? > > > > > > any hints would be great! > > thanks > > > > ossi > > > > -- Brett Porter Blog: http://www.devzuz.org/blogs/bporter/
Re: continuum 1.1 together with archiva 1.0 on tomcat 5.5
Hi Ossi, I posted the same problem today, but i don't use archiva. If you find a solution, please let me know. :) Ingo ossi petz schrieb: Hallo I tried to install both archiva and continuum on the same tomcat 5.5.25 / Java 1.5 When i only install continuum things work fine. When i only install archiva things work too. When i install both continuum and archiva i end up with apache derby exceptions. archiva starts (i guess its because of its arc..< con..), continuum cant connect / create the database (see attached stacktrace). there is only a 'see next error'. i dont fully get the source of the problem. do i need to copy the derby.jar into each application? or should i use different resource names in the container configuration? any hints would be great! thanks ossi
Re: continuum 1.1 together with archiva 1.0 on tomcat 5.5
You can't use more than one datasource on an embedded db. I think the exception is on the users db access. I'd recommend to use an external derby server instead of an embedded db. Emmanuel ossi petz a écrit : Hallo I tried to install both archiva and continuum on the same tomcat 5.5.25 / Java 1.5 When i only install continuum things work fine. When i only install archiva things work too. When i install both continuum and archiva i end up with apache derby exceptions. archiva starts (i guess its because of its arc..< con..), continuum cant connect / create the database (see attached stacktrace). there is only a 'see next error'. i dont fully get the source of the problem. do i need to copy the derby.jar into each application? or should i use different resource names in the container configuration? any hints would be great! thanks ossi
continuum 1.1 together with archiva 1.0 on tomcat 5.5
Hallo I tried to install both archiva and continuum on the same tomcat 5.5.25 / Java 1.5 When i only install continuum things work fine. When i only install archiva things work too. When i install both continuum and archiva i end up with apache derby exceptions. archiva starts (i guess its because of its arc..< con..), continuum cant connect / create the database (see attached stacktrace). there is only a 'see next error'. i dont fully get the source of the problem. do i need to copy the derby.jar into each application? or should i use different resource names in the container configuration? any hints would be great! thanks ossi 2007-12-03 15:31:57,555 [http-8080-Processor20] INFO org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/continuum] - Loading plexus context properties from: '/WEB-INF/plexus.properties' 2007-12-03 15:31:57,558 [http-8080-Processor20] INFO org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/continuum] - Could not load plexus context properties from: '/WEB-INF/plexus.properties' 2007-12-03 15:31:57,985 [http-8080-Processor20] INFO org.codehaus.plexus.PlexusContainer - Loading on start [role,roleHint]: [org.apache.maven.continuum.Continuum,default] 2007-12-03 15:31:58,863 [http-8080-Processor20] ERROR JPOX.RDBMS.Schema - Failed initialising database. Please check that your database JDBC driver is accessible, and the database URL and username/password are correct. Exception : Cannot create PoolableConnectionFactory (Failed to start database '/home/tomcat/continuum/data/database/continuum', see the next exception for details.) org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Failed to start database '/home/tomcat/continuum/data/database/continuum', see the next exception for details.) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1225) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880) at org.jpox.util.FailoverUtils.getConnection(FailoverUtils.java:51) at org.jpox.store.rdbms.RDBMSManager.(RDBMSManager.java:241) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:494) at org.jpox.util.ClassUtils.newInstance(ClassUtils.java:73) at org.jpox.store.StoreManagerFactory.getStoreManager(StoreManagerFactory.java:73) at org.jpox.AbstractPersistenceManager.getStoreManager(AbstractPersistenceManager.java:295) at org.jpox.AbstractPersistenceManager.(AbstractPersistenceManager.java:217) at org.jpox.PersistenceManagerImpl.(PersistenceManagerImpl.java:42) at org.jpox.PersistenceManagerFactoryImpl.getPersistenceManager(PersistenceManagerFactoryImpl.java:178) at org.jpox.PersistenceManagerFactoryImpl.getPersistenceManager(PersistenceManagerFactoryImpl.java:153) at org.apache.maven.continuum.store.JdoContinuumStore.getPersistenceManager(JdoContinuumStore.java:2033) at org.apache.maven.continuum.store.JdoContinuumStore.getPersistenceManager(JdoContinuumStore.java:2028) at org.apache.maven.continuum.store.JdoContinuumStore.getContinuumBuildDefinitionTemplateWithType(JdoContinuumStore.java:792) at org.apache.maven.continuum.builddefinition.DefaultBuildDefinitionService.getContinuumDefaultWithType(DefaultBuildDefinitionService.java:244) at org.apache.maven.continuum.builddefinition.DefaultBuildDefinitionService.getDefaultAntBuildDefinitionTemplate(DefaultBuildDefinitionService.java:255) at org.apache.maven.continuum.builddefinition.DefaultBuildDefinitionService.initializeDefaultContinuumBuildDefintions(DefaultBuildDefinitionService.java:115) at org.apache.maven.continuum.builddefinition.DefaultBuildDefinitionService.initialize(DefaultBuildDefinitionService.java:104) at org.codehaus.plexus.personality.plexus.lifecycle.phase.InitializePhase.execute(InitializePhase.java:33) at org.codehaus.plexus.lifecycle.AbstractLifecycleHandler.start(AbstractLifecycleHandler.java:128) at org.codehaus.plexus.component.manager.AbstractComponentManager.startComponentLifecycle(AbstractComponentManager.java:142) at org.codehaus.plexus.component.manager.AbstractComponentManager.createComponentInstance(AbstractComponentManager.java:132) at org.codehaus.plexus.component.manager.ClassicSingletonComponentManager.getComponent(ClassicSingletonComponentManager.java:90) at org.codehaus.plexus.DefaultComponentLookupManager.lookup(DefaultComponentLookupManager.java:147) at org.codehaus.plexus.DefaultPlexusContainer.lookup(DefaultPlexu
AW: Problem with continuum 1.1 - cannot connect with web browser
ves, you are right! I installed sun jdk, now it works! Thank you very much! > -Ursprüngliche Nachricht- > Von: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > Gesendet: Freitag, 30. November 2007 10:50 > An: [EMAIL PROTECTED] > Betreff: Re: Problem with continuum 1.1 - cannot connect with > web browser > > what is your jdk? it isn't a sun jdk, right? > > Emmanuel > > Kuipers, Hartmut a écrit : > > Hello! > > > > Continuum 1.1 is running on a linux server (Suse 10.3, 64 > bit), but if > > I start my web browser with > http://localhost:8080/continuum/ I get an > > error (http error: 500). > > With continuum 1.0.3 everything works fine. > > Any idea? > > Many thanks in advance for your help! > > Ben Kuipers > > > > Here is the log: > > > > jvm 1| 28.11.2007 14:31:37 > org.mortbay.jetty.servlet.ServletHandler > > handle > > jvm 1| WARNUNG: /continuum/: > > jvm 1| java.lang.NoClassDefFoundError: > gnu/classpath/Configuration > > jvm 1| at com.sun.tools.javac.Main.(Main.java:66) > > jvm 1| at java.lang.Class.forName0(Native Method) > > jvm 1| at java.lang.Class.forName(Class.java:164) > > jvm 1| at > > > org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.doesMod > > er > > nCompilerExist(CompilerAdapterFactory.java:139) > > jvm 1| at > > > org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getComp > > il > > er(CompilerAdapterFactory.java:97) > > jvm 1| at > > org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:929) > > jvm 1| at > > org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758) > > jvm 1| at > > > org.apache.jasper.compiler.AntCompiler.generateClass(AntCompiler.java: > > 21 > > 9) > > jvm 1| at > > org.apache.jasper.compiler.Compiler.compile(Compiler.java:297) > > jvm 1| at > > org.apache.jasper.compiler.Compiler.compile(Compiler.java:276) > > jvm 1| at > > org.apache.jasper.compiler.Compiler.compile(Compiler.java:264) > > jvm 1| at > > > org.apache.jasper.JspCompilationContext.compile(JspCompilationContext. > > ja > > va:563) > > jvm 1| at > > > org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper. > > ja > > va:303) > > jvm 1| at > > > org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet > .java:314) > > jvm 1| at > > org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264) > > jvm 1| at > > javax.servlet.http.HttpServlet.service(HttpServlet.java:802) > > jvm 1| at > > > org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:428) > > jvm 1| at > > > org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicatio > > nH > > andler.java:473) > > jvm 1| at > > org.mortbay.jetty.servlet.Dispatcher.dispatch(Dispatcher.java:286) > > jvm 1| at > > org.mortbay.jetty.servlet.Dispatcher.forward(Dispatcher.java:171) > > jvm 1| at > > org.mortbay.jetty.servlet.Default.handleGet(Default.java:302) > > jvm 1| at > > org.mortbay.jetty.servlet.Default.service(Default.java:223) > > jvm 1| at > > javax.servlet.http.HttpServlet.service(HttpServlet.java:802) > > jvm 1| at > > > org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:428) > > jvm 1| at > > > org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(W > > eb > > ApplicationHandler.java:830) > > jvm 1| at > > > com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDi > > sp > > atcher.java:189) > > jvm 1| at > > > org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(W > > eb > > ApplicationHandler.java:821) > > jvm 1| at > > > com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(P > ageFilter. > > java:118) > > jvm 1| at > > > com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter > > .j > > ava:52) > > jvm 1| at > > > org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(W > > eb > > ApplicationHandler.java:821) > > jvm 1| at > > > com.opensymphony.webwork.dispatcher.ActionContextCleanUp.doFilter(Acti > > on > > ContextCleanUp.java:88) > > jvm 1| at &
Re: Problem with continuum 1.1 - cannot connect with web browser
what is your jdk? it isn't a sun jdk, right? Emmanuel Kuipers, Hartmut a écrit : Hello! Continuum 1.1 is running on a linux server (Suse 10.3, 64 bit), but if I start my web browser with http://localhost:8080/continuum/ I get an error (http error: 500). With continuum 1.0.3 everything works fine. Any idea? Many thanks in advance for your help! Ben Kuipers Here is the log: jvm 1| 28.11.2007 14:31:37 org.mortbay.jetty.servlet.ServletHandler handle jvm 1| WARNUNG: /continuum/: jvm 1| java.lang.NoClassDefFoundError: gnu/classpath/Configuration jvm 1| at com.sun.tools.javac.Main.(Main.java:66) jvm 1| at java.lang.Class.forName0(Native Method) jvm 1| at java.lang.Class.forName(Class.java:164) jvm 1| at org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.doesModer nCompilerExist(CompilerAdapterFactory.java:139) jvm 1| at org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompil er(CompilerAdapterFactory.java:97) jvm 1| at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:929) jvm 1| at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758) jvm 1| at org.apache.jasper.compiler.AntCompiler.generateClass(AntCompiler.java:21 9) jvm 1| at org.apache.jasper.compiler.Compiler.compile(Compiler.java:297) jvm 1| at org.apache.jasper.compiler.Compiler.compile(Compiler.java:276) jvm 1| at org.apache.jasper.compiler.Compiler.compile(Compiler.java:264) jvm 1| at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.ja va:563) jvm 1| at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.ja va:303) jvm 1| at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314) jvm 1| at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264) jvm 1| at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) jvm 1| at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:428) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationH andler.java:473) jvm 1| at org.mortbay.jetty.servlet.Dispatcher.dispatch(Dispatcher.java:286) jvm 1| at org.mortbay.jetty.servlet.Dispatcher.forward(Dispatcher.java:171) jvm 1| at org.mortbay.jetty.servlet.Default.handleGet(Default.java:302) jvm 1| at org.mortbay.jetty.servlet.Default.service(Default.java:223) jvm 1| at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) jvm 1| at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:428) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:830) jvm 1| at com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDisp atcher.java:189) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:821) jvm 1| at com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(PageFilter. java:118) jvm 1| at com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter.j ava:52) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:821) jvm 1| at com.opensymphony.webwork.dispatcher.ActionContextCleanUp.doFilter(Action ContextCleanUp.java:88) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:821) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationH andler.java:471) jvm 1| at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:568) jvm 1| at org.mortbay.http.HttpContext.handle(HttpContext.java:1530) jvm 1| at org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationCon text.java:633) jvm 1| at org.mortbay.http.HttpContext.handle(HttpContext.java:1482) jvm 1| at org.mortbay.http.HttpServer.service(HttpServer.java:909) jvm 1| at org.mortbay.http.HttpConnection.service(HttpConnection.java:816) jvm 1| at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:982) jvm 1| at org.mortbay.http.HttpConnection.handle(HttpConnection.java:833) jvm 1| at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:244 ) jvm 1| at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:357) jvm 1| at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:534) jvm 1| 28.11.2007 14:31:41 org.mortbay.jetty.servlet.ServletHttpResponse sendError jvm 1| WARNUNG: EXCEPTION jvm 1| javax.servlet.ServletException jvm 1| at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:272) jvm 1| at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) jvm 1|
Problem with continuum 1.1 - cannot connect with web browser
Hello! Continuum 1.1 is running on a linux server (Suse 10.3, 64 bit), but if I start my web browser with http://localhost:8080/continuum/ I get an error (http error: 500). With continuum 1.0.3 everything works fine. Any idea? Many thanks in advance for your help! Ben Kuipers Here is the log: jvm 1| 28.11.2007 14:31:37 org.mortbay.jetty.servlet.ServletHandler handle jvm 1| WARNUNG: /continuum/: jvm 1| java.lang.NoClassDefFoundError: gnu/classpath/Configuration jvm 1| at com.sun.tools.javac.Main.(Main.java:66) jvm 1| at java.lang.Class.forName0(Native Method) jvm 1| at java.lang.Class.forName(Class.java:164) jvm 1| at org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.doesModer nCompilerExist(CompilerAdapterFactory.java:139) jvm 1| at org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompil er(CompilerAdapterFactory.java:97) jvm 1| at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:929) jvm 1| at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758) jvm 1| at org.apache.jasper.compiler.AntCompiler.generateClass(AntCompiler.java:21 9) jvm 1| at org.apache.jasper.compiler.Compiler.compile(Compiler.java:297) jvm 1| at org.apache.jasper.compiler.Compiler.compile(Compiler.java:276) jvm 1| at org.apache.jasper.compiler.Compiler.compile(Compiler.java:264) jvm 1| at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.ja va:563) jvm 1| at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.ja va:303) jvm 1| at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314) jvm 1| at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264) jvm 1| at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) jvm 1| at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:428) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationH andler.java:473) jvm 1| at org.mortbay.jetty.servlet.Dispatcher.dispatch(Dispatcher.java:286) jvm 1| at org.mortbay.jetty.servlet.Dispatcher.forward(Dispatcher.java:171) jvm 1| at org.mortbay.jetty.servlet.Default.handleGet(Default.java:302) jvm 1| at org.mortbay.jetty.servlet.Default.service(Default.java:223) jvm 1| at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) jvm 1| at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:428) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:830) jvm 1| at com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDisp atcher.java:189) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:821) jvm 1| at com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(PageFilter. java:118) jvm 1| at com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter.j ava:52) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:821) jvm 1| at com.opensymphony.webwork.dispatcher.ActionContextCleanUp.doFilter(Action ContextCleanUp.java:88) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(Web ApplicationHandler.java:821) jvm 1| at org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationH andler.java:471) jvm 1| at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:568) jvm 1| at org.mortbay.http.HttpContext.handle(HttpContext.java:1530) jvm 1| at org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationCon text.java:633) jvm 1| at org.mortbay.http.HttpContext.handle(HttpContext.java:1482) jvm 1| at org.mortbay.http.HttpServer.service(HttpServer.java:909) jvm 1| at org.mortbay.http.HttpConnection.service(HttpConnection.java:816) jvm 1| at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:982) jvm 1| at org.mortbay.http.HttpConnection.handle(HttpConnection.java:833) jvm 1| at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:244 ) jvm 1| at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:357) jvm 1| at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:534) jvm 1| 28.11.2007 14:31:41 org.mortbay.jetty.servlet.ServletHttpResponse sendError jvm 1| WARNUNG: EXCEPTION jvm 1| javax.servlet.ServletException jvm 1| at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:272) jvm 1| at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) jvm 1| at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:428) jvm 1| at
Re: Continuum 1.1: Appearance feature
Well, I upgraded to Firefox 2.0.0.10 as you suggested, and even shut down/restarted the Continuum app, but no joy :-(. Only thing I haven't done is reboot the PC. -- View this message in context: http://www.nabble.com/Continuum-1.1%3A-Appearance-feature-tf4897268.html#a14026452 Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Continuum 1.1: Appearance feature
Hi, Upgrade to firefox 2.0.0.10 :-) No issue here. -- Olivier 2007/11/29, Ken Turner <[EMAIL PROTECTED]>: > > > I have provided company POM information - Name, URL and Logo URL, and the > result is very pretty when viewed using IE6, but doesn't work at all with > Firefox 2.0.0.9. > > Anybody know of a workaround for this? > -- > View this message in context: > http://www.nabble.com/Continuum-1.1%3A-Appearance-feature-tf4897268.html#a14025957 > Sent from the Continuum - Users mailing list archive at Nabble.com. > >
Continuum 1.1: Appearance feature
I have provided company POM information - Name, URL and Logo URL, and the result is very pretty when viewed using IE6, but doesn't work at all with Firefox 2.0.0.9. Anybody know of a workaround for this? -- View this message in context: http://www.nabble.com/Continuum-1.1%3A-Appearance-feature-tf4897268.html#a14025957 Sent from the Continuum - Users mailing list archive at Nabble.com.
[announce] Continuum 1.1 final is released
The Continuum team is pleased to announce the Continuum 1.1 final release Highlights are: * bug fixes * A new backup tool with xmlrpc for continuum db You can grab the latest release from the download page : http://maven.apache.org/continuum/download.html To upgrade from a previous 1.1 beta, you can look at Upgrade Guide : http://maven.apache.org/continuum/documentation/1_1/installation/upgrade.html Below is the jira release notes for this release. Release Notes - Continuum - Version 1.1 Bug * [CONTINUUM-1313] - Document changes to XMLRPC * [CONTINUUM-1492] - error when trying to run data management tool when behind a proxied firewall * [CONTINUUM-1536] - Data management cli doesn't read settings.xml * [CONTINUUM-1539] - French langage misspelling * [CONTINUUM-1540] - data-management-cli-1.1-beta-4-app.jar will not import builds data * [CONTINUUM-1541] - NPE with "Provide Release Parameters" * [CONTINUUM-1543] - Email Subject line templates support only 3 name variables. * [CONTINUUM-1544] - Email Summary no longer includes the Test Summary statistics. * [CONTINUUM-1547] - data-management-cli import cannot handle testResult entities in build.xml * [CONTINUUM-1548] - NPE in IRC Notifier * [CONTINUUM-1550] - Upgrade documentation commands don't work * [CONTINUUM-1551] - the builds are not ordered by date * [CONTINUUM-1552] - When trying to export the user database -> FileNotFoundException: backups/users/keys.xml (No such file or directory) * [CONTINUUM-1556] - Empty Group Description causes Freemarker error in Group Edit mode * [CONTINUUM-1557] - Appearance is not saved * [CONTINUUM-1559] - loading company pom doesn't use repositories declared in settings.xml * [CONTINUUM-1560] - Error with group summary auto-refresh after performing a release * [CONTINUUM-1561] - Documentation on how to configure appareance in Continuum * [CONTINUUM-1564] - Adding Continuum Installations accepts null value for "value/path" field * [CONTINUUM-1571] - NullPointerException - IrcContinuumNotifier Improvement * [CONTINUUM-1397] - ability to customise html footer * [CONTINUUM-1472] - No navigation on Project Release Summary page * [CONTINUUM-1546] - There should be a way to simply create a project group without having to add a project * [CONTINUUM-1563] - add two new parameters in the mail notifier includeTestSummary and includeOutput New Feature * [CONTINUUM-1379] - Documentation Configuration Continuum ClearCase Maven 2 Task * [CONTINUUM-347] - document push build technique by project id * [CONTINUUM-570] - Documentation to add for war deployment in several container * [CONTINUUM-1204] - Fix permissons on the CONTINUUMUSER space Emmanuel
Re: Continuum 1.1-beta-3 crashing while adding a new project group
Hi, Have a look at http://maven.apache.org/continuum/documentation/1_1/installation/upgrade.htmlsection Importing Data to the new version. Have you made the update in SEQUENCE_TABLE ? -- Olivier 2007/11/14, Anshula <[EMAIL PROTECTED]>: > > > Hi, > > I have been using Continuum 1.1-beta-3 since more than a month now and it > has been running smoothly. But today I attempted to add some more project > groups to it, and it crashed giving me a primary key constraint violation. > Attached is the stacktrace. > > I did migrate my data from 1.1-beta3 from beta 2 before starting to use > beta-3. Could that have caused the problem ? This is the 1st problem I > have > faced since the migration. All the other data migrated smoothly, and I > have > been able to add/edit schedules,projects, build definitions since then. > > Help will be appreciated. > Regards, > Anshula > > http://www.nabble.com/file/p13756617/Stacktrace.txt Stacktrace.txt > > -- > View this message in context: > http://www.nabble.com/Continuum-1.1-beta-3-crashing-while-adding-a-new-project-group-tf4808053.html#a13756617 > Sent from the Continuum - Users mailing list archive at Nabble.com. > >
Re: Continuum 1.1-beta-3 crashing while adding a new project group
Just made the update on projectGroup table value in SEQUENCE_TABLE Something like : update SEQUENCE_TABLE set NEXT_VAL = (select max(id) + 10 from projectGroup) where SEQUENCE_NAME ='org.apache.maven.continuum.model.project.ProjectGroup' -- Olivier 2007/11/14, Anshula <[EMAIL PROTECTED]>: > > > Hi Oliver, > > Thanks for the reply. > No I have not made any change to the SEQUENCE_TABLE. Should that cause > this > error ? > Isnt there any other way to correct this error now? Coz I have already > imported data from beta2 to beta3 long time back..And made quite a few > updates after that... > > Regards, > Anshula > > > olivier lamy wrote: > > > > Hi, > > Have a look at > > > http://maven.apache.org/continuum/documentation/1_1/installation/upgrade.htmlsection > > Importing Data to the new version. > > Have you made the update in SEQUENCE_TABLE ? > > > > -- > > Olivier > > > > 2007/11/14, Anshula <[EMAIL PROTECTED]>: > >> > >> > >> Hi, > >> > >> I have been using Continuum 1.1-beta-3 since more than a month now and > it > >> has been running smoothly. But today I attempted to add some more > project > >> groups to it, and it crashed giving me a primary key constraint > >> violation. > >> Attached is the stacktrace. > >> > >> I did migrate my data from 1.1-beta3 from beta 2 before starting to use > >> beta-3. Could that have caused the problem ? This is the 1st problem I > >> have > >> faced since the migration. All the other data migrated smoothly, and I > >> have > >> been able to add/edit schedules,projects, build definitions since then. > >> > >> Help will be appreciated. > >> Regards, > >> Anshula > >> > >> http://www.nabble.com/file/p13756617/Stacktrace.txt Stacktrace.txt > >> > >> -- > >> View this message in context: > >> > http://www.nabble.com/Continuum-1.1-beta-3-crashing-while-adding-a-new-project-group-tf4808053.html#a13756617 > >> Sent from the Continuum - Users mailing list archive at Nabble.com. > >> > >> > > > > > > -- > View this message in context: > http://www.nabble.com/Continuum-1.1-beta-3-crashing-while-adding-a-new-project-group-tf4808053.html#a13757364 > Sent from the Continuum - Users mailing list archive at Nabble.com. > >
Re: Continuum 1.1-beta-3 crashing while adding a new project group
Hi Oliver, Thanks for the reply. No I have not made any change to the SEQUENCE_TABLE. Should that cause this error ? Isnt there any other way to correct this error now? Coz I have already imported data from beta2 to beta3 long time back..And made quite a few updates after that... Regards, Anshula olivier lamy wrote: > > Hi, > Have a look at > http://maven.apache.org/continuum/documentation/1_1/installation/upgrade.htmlsection > Importing Data to the new version. > Have you made the update in SEQUENCE_TABLE ? > > -- > Olivier > > 2007/11/14, Anshula <[EMAIL PROTECTED]>: >> >> >> Hi, >> >> I have been using Continuum 1.1-beta-3 since more than a month now and it >> has been running smoothly. But today I attempted to add some more project >> groups to it, and it crashed giving me a primary key constraint >> violation. >> Attached is the stacktrace. >> >> I did migrate my data from 1.1-beta3 from beta 2 before starting to use >> beta-3. Could that have caused the problem ? This is the 1st problem I >> have >> faced since the migration. All the other data migrated smoothly, and I >> have >> been able to add/edit schedules,projects, build definitions since then. >> >> Help will be appreciated. >> Regards, >> Anshula >> >> http://www.nabble.com/file/p13756617/Stacktrace.txt Stacktrace.txt >> >> -- >> View this message in context: >> http://www.nabble.com/Continuum-1.1-beta-3-crashing-while-adding-a-new-project-group-tf4808053.html#a13756617 >> Sent from the Continuum - Users mailing list archive at Nabble.com. >> >> > > -- View this message in context: http://www.nabble.com/Continuum-1.1-beta-3-crashing-while-adding-a-new-project-group-tf4808053.html#a13757364 Sent from the Continuum - Users mailing list archive at Nabble.com.
Continuum 1.1-beta-3 crashing while adding a new project group
Hi, I have been using Continuum 1.1-beta-3 since more than a month now and it has been running smoothly. But today I attempted to add some more project groups to it, and it crashed giving me a primary key constraint violation. Attached is the stacktrace. I did migrate my data from 1.1-beta3 from beta 2 before starting to use beta-3. Could that have caused the problem ? This is the 1st problem I have faced since the migration. All the other data migrated smoothly, and I have been able to add/edit schedules,projects, build definitions since then. Help will be appreciated. Regards, Anshula http://www.nabble.com/file/p13756617/Stacktrace.txt Stacktrace.txt -- View this message in context: http://www.nabble.com/Continuum-1.1-beta-3-crashing-while-adding-a-new-project-group-tf4808053.html#a13756617 Sent from the Continuum - Users mailing list archive at Nabble.com.
RE: MySQL-5.1 INSERT error with continuum-1.1-beta-4
Sorry, my mistake yes. I suddenly realized this was some UTF-8 related problem because of the '\xEF\xBF\xBD' string. I always use the string jdbc:mysql://localhost:3306/continuum?useUnicode=true&characterEncoding= UTF-8 for some reasons. I just got rid of the ?useUnicode=true&characterEncoding=UTF-8 thing, and then it worked... Thanks! _ From: Eigil Hysvær [mailto:[EMAIL PROTECTED] Sent: 14. november 2007 19:09 To: [EMAIL PROTECTED] Subject: MySQL-5.1 INSERT error with continuum-1.1-beta-4 Hello, Im currently evaluating CI tools and the time has come to Continuum. I decided to try the 1.1-beta4 because when the time comes to implement the CI into our organization Im sure 1.1 has gone final. I have installed the standalone version of continuum-1.1-beta-4 on windows 2003 server using MySQL 5.1. Everything seems to work until I try to register a new user. The database already contains the two users admin and guest from the installment. I receive the Welcome to Maven Continuum email as well even if Im not registered in the database. I belive I have carefully set up things according to docs, but of course I may have made a mistake. The log says: javax.jdo.JDODataStoreException: Insert request failed: INSERT INTO `JDOUSER` (`ACCOUNT_CREATION_DATE`,`ENCODED_PASSWORD`,`EMAIL`,`LAST_PASSWORD_CHANGE`,` FULL_NAME`,`VALIDATED`,`PASSWORD_CHANGE_REQUIRED`,`COUNT_FAILED_LOGIN_ATTEMP TS`,`LAST_LOGIN_DATE`,`PERMANENT`,`USER_PASSWORD`,`LOCKED`,`MODEL_ENCODING`, `USERNAME`) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?) (...) java.sql.SQLException: Incorrect string value: '\xEF\xBF\xBD' for column 'FULL_NAME' at row 1 Does somebody know anything about this error? The entire log has been attached to this mail. Best Regards, ___ Rubberduck Media Lab Eigil Hysvær E-mail:[EMAIL PROTECTED] Web: www.rubberduckmedialab.com
MySQL-5.1 INSERT error with continuum-1.1-beta-4
Hello, Im currently evaluating CI tools and the time has come to Continuum. I decided to try the 1.1-beta4 because when the time comes to implement the CI into our organization Im sure 1.1 has gone final. I have installed the standalone version of continuum-1.1-beta-4 on windows 2003 server using MySQL 5.1. Everything seems to work until I try to register a new user. The database already contains the two users admin and guest from the installment. I receive the Welcome to Maven Continuum email as well even if Im not registered in the database. I belive I have carefully set up things according to docs, but of course I may have made a mistake. The log says: javax.jdo.JDODataStoreException: Insert request failed: INSERT INTO `JDOUSER` (`ACCOUNT_CREATION_DATE`,`ENCODED_PASSWORD`,`EMAIL`,`LAST_PASSWORD_CHANGE`,` FULL_NAME`,`VALIDATED`,`PASSWORD_CHANGE_REQUIRED`,`COUNT_FAILED_LOGIN_ATTEMP TS`,`LAST_LOGIN_DATE`,`PERMANENT`,`USER_PASSWORD`,`LOCKED`,`MODEL_ENCODING`, `USERNAME`) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?) (...) java.sql.SQLException: Incorrect string value: '\xEF\xBF\xBD' for column 'FULL_NAME' at row 1 Does somebody know anything about this error? The entire log has been attached to this mail. Best Regards, ___ Rubberduck Media Lab Eigil Hysvær E-mail:[EMAIL PROTECTED] Web: www.rubberduckmedialab.com
Continuum 1.1-beta-3: Cannot Delete Some Projects
Hi, I have a situation where I have two projects in a group that I cannot delete. I can delete all other projects in that group. The error message I get is the following: javax.jdo.JDOUserException: One or more instances could not be deleted NestedThrowables: javax.jdo.JDODataStoreException: Delete request failed: DELETE FROM PROJECTDEPENDENCY WHERE PROJECTDEPENDENCY_ID=? NestedThrowables: SQL Exception: DELETE on table 'PROJECTDEPENDENCY' caused a violation of foreign key constraint 'PROJECT_FK2' for key (35954). The statement has been rolled back. Any idea how I can fix that? Andreas
[announce] Continuum 1.1-beta-4 is released
The Continuum team is pleased to announce the Continuum 1.1-beta-4 release Highlights are: * lot of bug fixes * A new page to view the build queue * Customization of mail subject You can grab the latest release from the download page : http://maven.apache.org/continuum/download.html To upgrade from a previous 1.1 beta, you can look at Upgrade Guide : http://maven.apache.org/continuum/documentation/1_1/installation/upgrade.html Below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-beta-4 Sub-task * [CONTINUUM-1499] - Translate to Brazilian Portuguese * [CONTINUUM-1534] - Translate to French Bug * [CONTINUUM-811] - Documentation of Deployment Repository Directory * [CONTINUUM-1355] - No admin user found after Tomcat shutdown (Tomcat doesn't shutdown properly) * [CONTINUUM-1392] - Continuum tests require too much external set up * [CONTINUUM-1403] - Error on edit project group page * [CONTINUUM-1453] - Confirmation Page for Deleting a Build Definition is not Informative Enough * [CONTINUUM-1466] - Project name accepts blank spaces when edited in Project Summary > Members Tab > Edit Project * [CONTINUUM-1473] - Server Id in wagon notifier edit pages is required but doesn't have validation * [CONTINUUM-1474] - At the time of an addition of new BuildDefinition with XmlRPC client, the automatically generated buildDefinitionID cannot be recovered * [CONTINUUM-1476] - warning/error in the mail generation * [CONTINUUM-1481] - datamanagement-cli must support more db * [CONTINUUM-1487] - should not be allowed to delete a build result that is still executing * [CONTINUUM-1491] - Build history screen should show build definition description * [CONTINUUM-1494] - Maximum length for name column exceeded in makeAndStoreBuildResult * [CONTINUUM-1495] - Calling getAllProjectGroups() fails * [CONTINUUM-1502] - After changing the name of a project group, the project dissapears and is not accessible, not even by the admin user. * [CONTINUUM-1508] - NullPointerException when adding an empty installation to a profile * [CONTINUUM-1509] - always build option doesn't work with scheduler --> log = No files updated, not building * [CONTINUUM-1512] - Constraint Violation Exception when deleting an empty group * [CONTINUUM-1516] - Unable to send mail with more than one build definition * [CONTINUUM-1517] - missing includeBuildResult configuration * [CONTINUUM-1519] - Continuum does not respect build order for flat projects * [CONTINUUM-1520] - Scheduler is unstable * [CONTINUUM-1524] - Continuum don't find the default build definition for ANT/Shell projects * [CONTINUUM-1527] - NullPointer when Releasing without configuration node in the maven-release-plugin * [CONTINUUM-1530] - Problems releasing project in group with more than one project definition * [CONTINUUM-1532] - Remove TestResult/SuiteResult/TestCaseFailure from the model Improvement * [CONTINUUM-150] - Continuum site needs screenshots * [CONTINUUM-606] - Add Build Time to Project Summary Page * [CONTINUUM-703] - Display of last build date on Project Summary page * [CONTINUUM-789] - Show SCM branch/tag on summary screen * [CONTINUUM-815] - directory configuration * [CONTINUUM-1233] - Reduce number of clicks to add a project * [CONTINUUM-1254] - Clarification of Configuring Continuum as a Service in "Getting Started" Guide * [CONTINUUM-1388] - the NOTICE file is overzealous in declaring dependencies * [CONTINUUM-1436] - Add build definition template * [CONTINUUM-1483] - Better support for SCM like clearcase or SYNERGY * [CONTINUUM-1484] - Allow customization of email subject * [CONTINUUM-1493] - Data migration site documentation improvement * [CONTINUUM-1500] - remove ContinuumStore use from the webapp part * [CONTINUUM-1514] - Legend is hardcoded New Feature * [CONTINUUM-310] - customisable email templates * [CONTINUUM-583] - Show the build/checkout queues on the web interface * [CONTINUUM-1287] - editable build queue * [CONTINUUM-1328] - create build-definition-templates and link to them in build-definitons * [CONTINUUM-1331] - create new page: show current build queue with project name, next build time * [CONTINUUM-1332] - project group summary: show per project the last build time Task * [CONTINUUM-253] - Create a matrix of databases that Continuum can work with Wish * [CONTINUUM-409] - Email notifications could still include build stats when includeBuildResult is false * [CONTINUUM-1452] - Show a summary total of the Projects and Build Status columns on the Project Groups page - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Problem within Continuum 1.1 Beta 2 or Beta 3 generate-sources
Maybe you are right, i try to run an ANT and XDoclet Goal. I also will ask in maven-maling list. Thanks, Jens Can you post more informations? Continuum run mvn from the command line so it would be a problem with something in your pom. Emmanuel Mac-Systems a écrit : Hello, i'd like to know why mvn ignores my generate-sources when running in continuum ? If i do on cmd-line: mvn generate-source all is fine ? thanks for answer, Jens
Re: Problem with Maven in build of Continuum 1.1-beta-3
Providing the log entry that shows the maven command executed can help narrow down the problem... When i had this problem, the maven command showed INFO | jvm 1| 2007/09/30 20:27:23 | 2007-09-30 20:27:23,621 [pool-1-thread-1] INFO ShellCommandHelper:default - Executing: /bin/bash -c 'cd /usr/local/continuum-1.1-beta-2/apps/continuum/webapp/WEB-INF/working-directory/279 && /usr/local/bin/mvn --batch-mode --non-recursive - Dcontinuum.project.lastBuild.state=3 -Dcontinuum.project.nextBuild.number=1"- Dcontinuum.project.group.name=Aggregators " - Dcontinuum.project.lastBuild.number=0 clean site site:deploy' which lead to the deteciton that the group.name had spaces ( "- Dcontinuum.project.group.name=Aggregators ") Regards, Iker On 10/5/07, Paola26 <[EMAIL PROTECTED]> wrote: > > > Emamanuel, > I verify my project and don't find trailing spaces... > So, the problems are differents. > Tkanks for you help. > > Emmanuel Venisse wrote: > > > > I don't know if it is related but, check if your project group name have > a > > trailing space: > > > http://www.nabble.com/Error-when-project-group-has-trailing-spaces..-t4549392.html > > > > Emmanuel > > > > Paola26 a écrit : > >> Hi, > >> I work with continuum, i have two differents versions installed in > the > >> same > >> server, one is Continuum 1.0.3 this work in port 8080 , the other is > >> Continuum 1.1-Beta-3, for both working with maven 2.0.7, and make build > >> the > >> same project. > >> With Continuum 1.0.3, i don't have a problem, the build made whith > >> sucessful always, however with Continuum1.1-beta-3, the build is > broken, > >> the > >> continuum 1.1-beta-3 send a error mensage about this : constituent[0]: > >> file:/usr/local/maven-2.0.7/lib/maven-core-2.0.7-uber.jar , I ckeck my > >> maven installation and this package exist, and build with continuum > 1.0.3 > >> I don't understand very good this mensage, please i need help, > because I > >> intent change my continuum. > >> This error mensage is in attachement.: > >> --- > >> constituent[0]: file:/usr/local/maven-2.0.7/lib/maven- > core-2.0.7-uber.jar > >> --- > >> java.lang.StringIndexOutOfBoundsException: String index out of range: > -1 > >> at > >> java.lang.AbstractStringBuilder.setLength(AbstractStringBuilder.java > :146) > >> at java.lang.StringBuffer.setLength(StringBuffer.java:154) > >> at org.apache.maven.cli.MavenCli$CLIManager.cleanArgs( > MavenCli.java:796) > >> at org.apache.maven.cli.MavenCli$CLIManager.parse(MavenCli.java > :749) > >> at org.apache.maven.cli.MavenCli.main(MavenCli.java:98) > >> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) > >> at > >> sun.reflect.NativeMethodAccessorImpl.invoke( > NativeMethodAccessorImpl.java:39) > >> at > >> sun.reflect.DelegatingMethodAccessorImpl.invoke( > DelegatingMethodAccessorImpl.java:25) > >> at java.lang.reflect.Method.invoke(Method.java:585) > >> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java > :315) > >> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) > >> at org.codehaus.classworlds.Launcher.mainWithExitCode( > Launcher.java:430) > >> at org.codehaus.classworlds.Launcher.main(Launcher.java:375) > >> > >> Tks, > >> Rgs > >> > > > > > > > > -- > View this message in context: > http://www.nabble.com/Problem-with-Maven-in--build-of--Continuum-1.1-beta-3-tf4575939.html#a13063606 > Sent from the Continuum - Users mailing list archive at Nabble.com. > >
Re: Problem with Maven in build of Continuum 1.1-beta-3
Emamanuel, I verify my project and don't find trailing spaces... So, the problems are differents. Tkanks for you help. Emmanuel Venisse wrote: > > I don't know if it is related but, check if your project group name have a > trailing space: > http://www.nabble.com/Error-when-project-group-has-trailing-spaces..-t4549392.html > > Emmanuel > > Paola26 a écrit : >> Hi, >> I work with continuum, i have two differents versions installed in the >> same >> server, one is Continuum 1.0.3 this work in port 8080 , the other is >> Continuum 1.1-Beta-3, for both working with maven 2.0.7, and make build >> the >> same project. >> With Continuum 1.0.3, i don't have a problem, the build made whith >> sucessful always, however with Continuum1.1-beta-3, the build is broken, >> the >> continuum 1.1-beta-3 send a error mensage about this : constituent[0]: >> file:/usr/local/maven-2.0.7/lib/maven-core-2.0.7-uber.jar , I ckeck my >> maven installation and this package exist, and build with continuum 1.0.3 >> I don't understand very good this mensage, please i need help, because I >> intent change my continuum. >> This error mensage is in attachement.: >> --- >> constituent[0]: file:/usr/local/maven-2.0.7/lib/maven-core-2.0.7-uber.jar >> --- >> java.lang.StringIndexOutOfBoundsException: String index out of range: -1 >> at >> java.lang.AbstractStringBuilder.setLength(AbstractStringBuilder.java:146) >> at java.lang.StringBuffer.setLength(StringBuffer.java:154) >> at org.apache.maven.cli.MavenCli$CLIManager.cleanArgs(MavenCli.java:796) >> at org.apache.maven.cli.MavenCli$CLIManager.parse(MavenCli.java:749) >> at org.apache.maven.cli.MavenCli.main(MavenCli.java:98) >> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) >> at >> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) >> at >> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) >> at java.lang.reflect.Method.invoke(Method.java:585) >> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) >> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) >> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) >> at org.codehaus.classworlds.Launcher.main(Launcher.java:375) >> >> Tks, >> Rgs >> > > > -- View this message in context: http://www.nabble.com/Problem-with-Maven-in--build-of--Continuum-1.1-beta-3-tf4575939.html#a13063606 Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Continuum 1.1 Beta 2 - Out of mem after 30 Days without problems
Ok, build fresh is configured as "false". - jens I meant 'Build Fresh' Mac-Systems a écrit : Well, dont know exacly what you mean. I used the default schedule with some extra param for site generation and deploy of site: Goals Arguments Build File Schedule Profile From Build Fresh Default clean generate-sources install site site-deploy --batch-mode -e pom.xml DEFAULT_SCHEDULE <http://172.25.51.14:8080/continuum/schedule.action?id=1> GROUP false true - jens Do you use 'alwaysBuild' feature in build definition? We fixed a memory issue in this part in beta-3 Emmanuel Mac-Systems a écrit : Hello, before i gone in vacation i installed new beta 2 of continuum. Over 100 builds where made during my vacation Yesterday i regonized that no more mails were send from continuum. I log on to the continuum server and saw that builds were made only mail notification missed. I searched thru the logs, and didnt see any errors. Ok, restarting the server. I forced a build and saw this Out of Memory : 362328 [pool-1-thread-1] WARN org.apache.maven.continuum.scm.ContinuumScm:default - Provider message: The svn command failed. 362381 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 362721 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building 0[WrapperSimpleAppMain] INFO org.codehaus.plexus.PlexusContainer - Loading on start [role,roleHint]: [org.apache.maven.continuum.Continuum,default] 1629 [WrapperSimpleAppMain] INFO org.quartz.simpl.RAMJobStore - RAMJobStore initialized. 1629 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler 'defaultScheduler' initialized from an externally provided properties instance. 1630 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler version: 1.4.5 1631 [WrapperSimpleAppMain] INFO org.quartz.core.QuartzScheduler - Scheduler defaultScheduler_$_NON_CLUSTERED started. 1734 [WrapperSimpleAppMain] WARN org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven-1 - Could not find the executable 'maven' in the path '[/usr/local/bin, /usr/bin, /bin, /opt/bin, /usr/i686-pc-linux-gnu/gcc-bin/4.1.2$, /home/mavensite/maven-2.0.7/bin, /home/mavensite/continuum-1.0.3/bin/linux;]'. 1739 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:ant - Resolved the executable 'ant' to '/usr/bin/ant'. 2134 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven2 - Resolved the executable 'mvn' to '/home/mavensite/maven-2.0.7/bin/mvn'. 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - Build executors: 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - ant 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven-1 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven2 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - shell 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Initializing Continuum. 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Showing all projects: 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 7:WPP - CR 7005:1.0-SNAPSHOT:maven2 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 1:WPP - trunk:1.0-SNAPSHOT:maven2 6425 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Starting Continuum. 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - < Continuum 1.1-beta-2 started! > 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -\ ^__^ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - \ (oo)\___ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - (__)\ )\/\ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - ||w | 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -
Re: Continuum 1.1 Beta 2 - Out of mem after 30 Days without problems
I meant 'Build Fresh' Mac-Systems a écrit : Well, dont know exacly what you mean. I used the default schedule with some extra param for site generation and deploy of site: Goals Arguments Build File Schedule Profile From Build Fresh Default clean generate-sources install site site-deploy --batch-mode -e pom.xml DEFAULT_SCHEDULE <http://172.25.51.14:8080/continuum/schedule.action?id=1> GROUP false true - jens Do you use 'alwaysBuild' feature in build definition? We fixed a memory issue in this part in beta-3 Emmanuel Mac-Systems a écrit : Hello, before i gone in vacation i installed new beta 2 of continuum. Over 100 builds where made during my vacation Yesterday i regonized that no more mails were send from continuum. I log on to the continuum server and saw that builds were made only mail notification missed. I searched thru the logs, and didnt see any errors. Ok, restarting the server. I forced a build and saw this Out of Memory : 362328 [pool-1-thread-1] WARN org.apache.maven.continuum.scm.ContinuumScm:default - Provider message: The svn command failed. 362381 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 362721 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building 0[WrapperSimpleAppMain] INFO org.codehaus.plexus.PlexusContainer - Loading on start [role,roleHint]: [org.apache.maven.continuum.Continuum,default] 1629 [WrapperSimpleAppMain] INFO org.quartz.simpl.RAMJobStore - RAMJobStore initialized. 1629 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler 'defaultScheduler' initialized from an externally provided properties instance. 1630 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler version: 1.4.5 1631 [WrapperSimpleAppMain] INFO org.quartz.core.QuartzScheduler - Scheduler defaultScheduler_$_NON_CLUSTERED started. 1734 [WrapperSimpleAppMain] WARN org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven-1 - Could not find the executable 'maven' in the path '[/usr/local/bin, /usr/bin, /bin, /opt/bin, /usr/i686-pc-linux-gnu/gcc-bin/4.1.2$, /home/mavensite/maven-2.0.7/bin, /home/mavensite/continuum-1.0.3/bin/linux;]'. 1739 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:ant - Resolved the executable 'ant' to '/usr/bin/ant'. 2134 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven2 - Resolved the executable 'mvn' to '/home/mavensite/maven-2.0.7/bin/mvn'. 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - Build executors: 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - ant 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven-1 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven2 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - shell 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Initializing Continuum. 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Showing all projects: 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 7:WPP - CR 7005:1.0-SNAPSHOT:maven2 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 1:WPP - trunk:1.0-SNAPSHOT:maven2 6425 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Starting Continuum. 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - < Continuum 1.1-beta-2 started! > 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -\ ^__^ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - \ (oo)\___ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - (__)\ )\/\ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -||w | 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -|| || 6428 [Wrapper
Re: Continuum 1.1 Beta 2 - Out of mem after 30 Days without problems
Well, dont know exacly what you mean. I used the default schedule with some extra param for site generation and deploy of site: Goals Arguments Build File Schedule Profile From Build Fresh Default clean generate-sources install site site-deploy --batch-mode -e pom.xml DEFAULT_SCHEDULE <http://172.25.51.14:8080/continuum/schedule.action?id=1> GROUP false true - jens Do you use 'alwaysBuild' feature in build definition? We fixed a memory issue in this part in beta-3 Emmanuel Mac-Systems a écrit : Hello, before i gone in vacation i installed new beta 2 of continuum. Over 100 builds where made during my vacation Yesterday i regonized that no more mails were send from continuum. I log on to the continuum server and saw that builds were made only mail notification missed. I searched thru the logs, and didnt see any errors. Ok, restarting the server. I forced a build and saw this Out of Memory : 362328 [pool-1-thread-1] WARN org.apache.maven.continuum.scm.ContinuumScm:default - Provider message: The svn command failed. 362381 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 362721 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building 0[WrapperSimpleAppMain] INFO org.codehaus.plexus.PlexusContainer - Loading on start [role,roleHint]: [org.apache.maven.continuum.Continuum,default] 1629 [WrapperSimpleAppMain] INFO org.quartz.simpl.RAMJobStore - RAMJobStore initialized. 1629 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler 'defaultScheduler' initialized from an externally provided properties instance. 1630 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler version: 1.4.5 1631 [WrapperSimpleAppMain] INFO org.quartz.core.QuartzScheduler - Scheduler defaultScheduler_$_NON_CLUSTERED started. 1734 [WrapperSimpleAppMain] WARN org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven-1 - Could not find the executable 'maven' in the path '[/usr/local/bin, /usr/bin, /bin, /opt/bin, /usr/i686-pc-linux-gnu/gcc-bin/4.1.2$, /home/mavensite/maven-2.0.7/bin, /home/mavensite/continuum-1.0.3/bin/linux;]'. 1739 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:ant - Resolved the executable 'ant' to '/usr/bin/ant'. 2134 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven2 - Resolved the executable 'mvn' to '/home/mavensite/maven-2.0.7/bin/mvn'. 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - Build executors: 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - ant 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven-1 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven2 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - shell 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Initializing Continuum. 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Showing all projects: 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 7:WPP - CR 7005:1.0-SNAPSHOT:maven2 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 1:WPP - trunk:1.0-SNAPSHOT:maven2 6425 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Starting Continuum. 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - < Continuum 1.1-beta-2 started! > 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -\ ^__^ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - \ (oo)\___ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - (__)\ )\/\ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -||w | 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -|| || 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppM
Re: Continuum 1.1 Beta 2 - Out of mem after 30 Days without problems
Do you use 'alwaysBuild' feature in build definition? We fixed a memory issue in this part in beta-3 Emmanuel Mac-Systems a écrit : Hello, before i gone in vacation i installed new beta 2 of continuum. Over 100 builds where made during my vacation Yesterday i regonized that no more mails were send from continuum. I log on to the continuum server and saw that builds were made only mail notification missed. I searched thru the logs, and didnt see any errors. Ok, restarting the server. I forced a build and saw this Out of Memory : 362328 [pool-1-thread-1] WARN org.apache.maven.continuum.scm.ContinuumScm:default - Provider message: The svn command failed. 362381 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 362721 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building 0[WrapperSimpleAppMain] INFO org.codehaus.plexus.PlexusContainer - Loading on start [role,roleHint]: [org.apache.maven.continuum.Continuum,default] 1629 [WrapperSimpleAppMain] INFO org.quartz.simpl.RAMJobStore - RAMJobStore initialized. 1629 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler 'defaultScheduler' initialized from an externally provided properties instance. 1630 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler version: 1.4.5 1631 [WrapperSimpleAppMain] INFO org.quartz.core.QuartzScheduler - Scheduler defaultScheduler_$_NON_CLUSTERED started. 1734 [WrapperSimpleAppMain] WARN org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven-1 - Could not find the executable 'maven' in the path '[/usr/local/bin, /usr/bin, /bin, /opt/bin, /usr/i686-pc-linux-gnu/gcc-bin/4.1.2$, /home/mavensite/maven-2.0.7/bin, /home/mavensite/continuum-1.0.3/bin/linux;]'. 1739 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:ant - Resolved the executable 'ant' to '/usr/bin/ant'. 2134 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven2 - Resolved the executable 'mvn' to '/home/mavensite/maven-2.0.7/bin/mvn'. 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - Build executors: 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - ant 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven-1 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven2 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - shell 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Initializing Continuum. 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Showing all projects: 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 7:WPP - CR 7005:1.0-SNAPSHOT:maven2 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 1:WPP - trunk:1.0-SNAPSHOT:maven2 6425 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Starting Continuum. 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - < Continuum 1.1-beta-2 started! > 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -\ ^__^ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - \ (oo)\___ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -(__)\ )\/\ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -||w | 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -|| || 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.initialization.ContinuumInitializer:default - Continuum initializer running ... 6577 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.build.settings.SchedulesActivator:default - Activating schedules ... 6608 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.build.settings.SchedulesActivator:default - DEFAULT_SCH
Continuum 1.1 Beta 2 - Out of mem after 30 Days without problems
Hello, before i gone in vacation i installed new beta 2 of continuum. Over 100 builds where made during my vacation Yesterday i regonized that no more mails were send from continuum. I log on to the continuum server and saw that builds were made only mail notification missed. I searched thru the logs, and didnt see any errors. Ok, restarting the server. I forced a build and saw this Out of Memory : 362328 [pool-1-thread-1] WARN org.apache.maven.continuum.scm.ContinuumScm:default - Provider message: The svn command failed. 362381 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 362721 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building 0[WrapperSimpleAppMain] INFO org.codehaus.plexus.PlexusContainer - Loading on start [role,roleHint]: [org.apache.maven.continuum.Continuum,default] 1629 [WrapperSimpleAppMain] INFO org.quartz.simpl.RAMJobStore - RAMJobStore initialized. 1629 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler 'defaultScheduler' initialized from an externally provided properties instance. 1630 [WrapperSimpleAppMain] INFO org.quartz.impl.StdSchedulerFactory - Quartz scheduler version: 1.4.5 1631 [WrapperSimpleAppMain] INFO org.quartz.core.QuartzScheduler - Scheduler defaultScheduler_$_NON_CLUSTERED started. 1734 [WrapperSimpleAppMain] WARN org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven-1 - Could not find the executable 'maven' in the path '[/usr/local/bin, /usr/bin, /bin, /opt/bin, /usr/i686-pc-linux-gnu/gcc-bin/4.1.2$, /home/mavensite/maven-2.0.7/bin, /home/mavensite/continuum-1.0.3/bin/linux;]'. 1739 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:ant - Resolved the executable 'ant' to '/usr/bin/ant'. 2134 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.ContinuumBuildExecutor:maven2 - Resolved the executable 'mvn' to '/home/mavensite/maven-2.0.7/bin/mvn'. 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - Build executors: 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - ant 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven-1 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - maven2 2139 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.execution.manager.BuildExecutorManager:default - shell 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Initializing Continuum. 2164 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Showing all projects: 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 7:WPP - CR 7005:1.0-SNAPSHOT:maven2 6424 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 1:WPP - trunk:1.0-SNAPSHOT:maven2 6425 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - Starting Continuum. 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6426 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - < Continuum 1.1-beta-2 started! > 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -\ ^__^ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - \ (oo)\___ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -(__)\ )\/\ 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -||w | 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default -|| || 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.Continuum:default - 6428 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.initialization.ContinuumInitializer:default - Continuum initializer running ... 6577 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.build.settings.SchedulesActivator:default - Activating schedules ... 6608 [WrapperSimpleAppMain] INFO org.apache.maven.continuum.build.settings.SchedulesActivator:default - DEFAULT_SCHEDULE: next fire time ->Fri Oct 05 14:00:00 CEST 2007 6609 [WrapperSimpleAppMain] INFO org.codehaus.plexus.PlexusContainer - Loading on start [ro
Rép. : Re: [announce] Continuum 1.1- beta-3 is released
I'd like to upgrade from 1.1-beta-1 to beta-3. I haven't found any library such data-management-cli-1.1-beta-1.jar to export data. What is the easier solution ? Regards, Eric >>> Anshula <[EMAIL PROTECTED]> 09/26/07 5:03 >>> just upgraded my continuum-1.1-beta-2 installation to beta-3. The new version looks very good. I upgraded my continuum database for the 1st time, it worked as a charm using the data management utility. :) Great work..!! Regards, Anshula Jesse McConnell wrote: > > hm, probably not right now...I'll have to provide for that in the plexus > ldap helper. > > I tested this against a setup where I had a utility user that I used for > that initial bind operation and at the time wasn't able to get the > apacheds > unit testing working so the number of scenarios I could test against was > limited. I'll definitely have to make a test for this though now that I > have that ability again. > > If you like open a redback issue for this at > http://jira.codehaus.org/browse/REDBACK to track progress on it. > > I am also going to put the configuration bits for ldap into the > security.properties as well since its a bit bothersome to have to set > those > things up in the application.xml like it is currently. > > jesse > > On 9/26/07, Cla Emanuel Monsch <[EMAIL PROTECTED]> wrote: >> >> hi there, >> >> is it possible to use ldap without bindDN/password? (anonyous bind) >> >> with the config bellow i got the following error: >> >> >> >> 389 >> dc=netcetera,dc=ch >> com.sun.jndi.ldap.LdapCtxFactory >> >> >> >> >> >> description >> gecos >> userPassword >> uid >> dc=netcetera,dc=ch >> inetOrgPerson >> >> >> >> INFO | jvm 1| 2007/09/26 14:23:26 | 2007-09-26 14:23:26,127 >> [SocketListener0-1] WARN ConfigurationFactory - No >> configuration found. Configuring ehcache fr >> om ehcache-failsafe.xml found in the classpath: >> jar:file:/share/nca05/build/servers/arcturus/continuum-1.1-beta-3 >> /apps/continuum/webapp/WEB-INF/lib/ehcache-1.2.4.jar!/ehc >> ache-failsafe.xml >> INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,244 >> [SocketListener0-1] INFO LdapController:default - Searching for >> user: guest >> INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,245 >> [SocketListener0-1] INFO LdapController:default - Searching for >> users with filter: '(&(objectCla >> ss=inetOrgPerson)(uid=guest))' from base dn: dc=netcetera,dc=ch >> INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,265 >> [SocketListener0-1] ERROR DispatcherUtils- Could not >> find action >> INFO | jvm 1| 2007/09/26 14:23:30 | Caught Exception while >> registering Interceptor class redbackEnvironmentCheckInterceptor - >> Class: org.codehaus.plexus.redback.xwor >> k.checks.security.GuestUserEnvironmentCheck >> INFO | jvm 1| 2007/09/26 14:23:30 | File: >> GuestUserEnvironmentCheck.java >> INFO | jvm 1| 2007/09/26 14:23:30 | Method: validateEnvironment >> INFO | jvm 1| 2007/09/26 14:23:30 | Line: 100 - >> >> org/codehaus/plexus/redback/xwork/checks/security/GuestUserEnvironmentCheck.java:100:-1 >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> org.codehaus.plexus.xwork.PlexusObjectFactory.buildInterceptor( >> PlexusObjectFactory.java:152) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.InterceptorBuilder.constructInterceptorReference >> (InterceptorBuilder.java:56) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.lookupInterceptorReference >> (XmlConfigurationProvider.jav >> a:701) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptorStack >> (XmlConfigurationProvider.java:568) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptorStacks >> (XmlConfigurationProvider.java:581 >> ) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptors >> (XmlConfigurationProvider.java:602) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >>
Re: [announce] Continuum 1.1-beta-3 is released
just upgraded my continuum-1.1-beta-2 installation to beta-3. The new version looks very good. I upgraded my continuum database for the 1st time, it worked as a charm using the data management utility. :) Great work..!! Regards, Anshula Jesse McConnell wrote: > > hm, probably not right now...I'll have to provide for that in the plexus > ldap helper. > > I tested this against a setup where I had a utility user that I used for > that initial bind operation and at the time wasn't able to get the > apacheds > unit testing working so the number of scenarios I could test against was > limited. I'll definitely have to make a test for this though now that I > have that ability again. > > If you like open a redback issue for this at > http://jira.codehaus.org/browse/REDBACK to track progress on it. > > I am also going to put the configuration bits for ldap into the > security.properties as well since its a bit bothersome to have to set > those > things up in the application.xml like it is currently. > > jesse > > On 9/26/07, Cla Emanuel Monsch <[EMAIL PROTECTED]> wrote: >> >> hi there, >> >> is it possible to use ldap without bindDN/password? (anonyous bind) >> >> with the config bellow i got the following error: >> >> >> >> 389 >> dc=netcetera,dc=ch >> com.sun.jndi.ldap.LdapCtxFactory >> >> >> >> >> >> description >> gecos >> userPassword >> uid >> dc=netcetera,dc=ch >> inetOrgPerson >> >> >> >> INFO | jvm 1| 2007/09/26 14:23:26 | 2007-09-26 14:23:26,127 >> [SocketListener0-1] WARN ConfigurationFactory - No >> configuration found. Configuring ehcache fr >> om ehcache-failsafe.xml found in the classpath: >> jar:file:/share/nca05/build/servers/arcturus/continuum-1.1-beta-3 >> /apps/continuum/webapp/WEB-INF/lib/ehcache-1.2.4.jar!/ehc >> ache-failsafe.xml >> INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,244 >> [SocketListener0-1] INFO LdapController:default - Searching for >> user: guest >> INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,245 >> [SocketListener0-1] INFO LdapController:default - Searching for >> users with filter: '(&(objectCla >> ss=inetOrgPerson)(uid=guest))' from base dn: dc=netcetera,dc=ch >> INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,265 >> [SocketListener0-1] ERROR DispatcherUtils- Could not >> find action >> INFO | jvm 1| 2007/09/26 14:23:30 | Caught Exception while >> registering Interceptor class redbackEnvironmentCheckInterceptor - >> Class: org.codehaus.plexus.redback.xwor >> k.checks.security.GuestUserEnvironmentCheck >> INFO | jvm 1| 2007/09/26 14:23:30 | File: >> GuestUserEnvironmentCheck.java >> INFO | jvm 1| 2007/09/26 14:23:30 | Method: validateEnvironment >> INFO | jvm 1| 2007/09/26 14:23:30 | Line: 100 - >> >> org/codehaus/plexus/redback/xwork/checks/security/GuestUserEnvironmentCheck.java:100:-1 >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> org.codehaus.plexus.xwork.PlexusObjectFactory.buildInterceptor( >> PlexusObjectFactory.java:152) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.InterceptorBuilder.constructInterceptorReference >> (InterceptorBuilder.java:56) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.lookupInterceptorReference >> (XmlConfigurationProvider.jav >> a:701) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptorStack >> (XmlConfigurationProvider.java:568) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptorStacks >> (XmlConfigurationProvider.java:581 >> ) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptors >> (XmlConfigurationProvider.java:602) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.addPackage >> (XmlConfigurationProvider.java:204) >> INFO | jvm 1| 2007/09/26 14:23:30 | at >> >> com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadConfiguratio
Re: [announce] Continuum 1.1-beta-3 is released
hm, probably not right now...I'll have to provide for that in the plexus ldap helper. I tested this against a setup where I had a utility user that I used for that initial bind operation and at the time wasn't able to get the apacheds unit testing working so the number of scenarios I could test against was limited. I'll definitely have to make a test for this though now that I have that ability again. If you like open a redback issue for this at http://jira.codehaus.org/browse/REDBACK to track progress on it. I am also going to put the configuration bits for ldap into the security.properties as well since its a bit bothersome to have to set those things up in the application.xml like it is currently. jesse On 9/26/07, Cla Emanuel Monsch <[EMAIL PROTECTED]> wrote: > > hi there, > > is it possible to use ldap without bindDN/password? (anonyous bind) > > with the config bellow i got the following error: > > > > 389 > dc=netcetera,dc=ch > com.sun.jndi.ldap.LdapCtxFactory > > > > > > description > gecos > userPassword > uid > dc=netcetera,dc=ch > inetOrgPerson > > > > INFO | jvm 1| 2007/09/26 14:23:26 | 2007-09-26 14:23:26,127 > [SocketListener0-1] WARN ConfigurationFactory - No > configuration found. Configuring ehcache fr > om ehcache-failsafe.xml found in the classpath: > jar:file:/share/nca05/build/servers/arcturus/continuum-1.1-beta-3 > /apps/continuum/webapp/WEB-INF/lib/ehcache-1.2.4.jar!/ehc > ache-failsafe.xml > INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,244 > [SocketListener0-1] INFO LdapController:default - Searching for > user: guest > INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,245 > [SocketListener0-1] INFO LdapController:default - Searching for > users with filter: '(&(objectCla > ss=inetOrgPerson)(uid=guest))' from base dn: dc=netcetera,dc=ch > INFO | jvm 1| 2007/09/26 14:23:30 | 2007-09-26 14:23:30,265 > [SocketListener0-1] ERROR DispatcherUtils- Could not > find action > INFO | jvm 1| 2007/09/26 14:23:30 | Caught Exception while > registering Interceptor class redbackEnvironmentCheckInterceptor - > Class: org.codehaus.plexus.redback.xwor > k.checks.security.GuestUserEnvironmentCheck > INFO | jvm 1| 2007/09/26 14:23:30 | File: > GuestUserEnvironmentCheck.java > INFO | jvm 1| 2007/09/26 14:23:30 | Method: validateEnvironment > INFO | jvm 1| 2007/09/26 14:23:30 | Line: 100 - > > org/codehaus/plexus/redback/xwork/checks/security/GuestUserEnvironmentCheck.java:100:-1 > INFO | jvm 1| 2007/09/26 14:23:30 | at > org.codehaus.plexus.xwork.PlexusObjectFactory.buildInterceptor( > PlexusObjectFactory.java:152) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.InterceptorBuilder.constructInterceptorReference > (InterceptorBuilder.java:56) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.lookupInterceptorReference > (XmlConfigurationProvider.jav > a:701) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptorStack > (XmlConfigurationProvider.java:568) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptorStacks > (XmlConfigurationProvider.java:581 > ) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadInterceptors > (XmlConfigurationProvider.java:602) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.addPackage > (XmlConfigurationProvider.java:204) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadConfigurationFile > (XmlConfigurationProvider.java:675 > ) > INFO | jvm 1| 2007/09/26 14:23:30 | at > > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.loadConfigurationFile > (XmlConfigurationProvider.java:678 > ) > INFO | jvm 1| 2007/09/26 14:23:30 | at > com.opensymphony.xwork.config.providers.XmlConfigurationProvider.init( > XmlConfigurationProvider.java:91) > INFO | jvm 1| 2007/09/26 14:23:30 | at > com.opensymphony.xwork.config.impl.DefaultConfiguration.reload( > DefaultConfiguration.java:86) > INFO | jvm 1| 2007/09/26 14:23:30 | at > com.opensymphony.xwork.config.ConfigurationManager.getConfiguration( > Configuration
Re: [announce] Continuum 1.1-beta-3 is released
Let us know how it works for you. As it is a new feature, we'd like to have some feedback. Emmanuel Emmanuel Venisse a écrit : Better with html: http://redback.codehaus.org/integration/ldap.html Emmanuel olivier lamy a écrit : Hi, http://svn.codehaus.org/redback/redback/trunk/redback-site/src/site/apt/integration/ldap.apt -- Olivier 2007/9/26, Cla Emanuel Monsch <[EMAIL PROTECTED]>: hi there, looks nice. especially the "working copy browsing" catched my eye at a first view. :-) does anybody know, where this file ( http://svn.codehaus.org/plexus/plexus-redback/trunk/redback-site/src/site/apt/integration/ldap.apt ) has moved to? cheers cla Emmanuel Venisse wrote: The Continuum team is pleased to announce the Continuum 1.1-beta-3release Highlights are: * lot of bug fixes * xwork/webwork update to fix remote code exploit in forms * mail notification to latest committers * LDAP authentication * performance improvement You can grab the latest release from: http://maven.apache.org/continuum/download.html To upgrade from 1.1-beta-2, you can look at this guide: http://maven.apache.org/continuum/guides/mini/guide-data-management.html Below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-beta-3 : Sub-task * [CONTINUUM-1441] - Keep connection on irc server between each messages Bug * [CONTINUUM-697] - sizes incompatible with mssql (Patch Attached) * [CONTINUUM-1037] - Ant projects inherit a default build definition for Maven 2. * [CONTINUUM-1038] - Build definitions should list what type they are (ant, maven, maven2, shell) * [CONTINUUM-1041] - two defaults on the build definition page * [CONTINUUM-1181] - Continuum aborts when running Postgres under JBoss * [CONTINUUM-1296] - Continuum 1.1-alpha-1 does not copy Maven2 project pom.xml's /project/build/defaultGoal/text() value to Build Definition Goals field. * [CONTINUUM-1306] - templated roles are not added automatically if missing after upgrade * [CONTINUUM-1325] - Surefire Report history is not kept for prior builds * [CONTINUUM-1348] - jut of memory in build result * [CONTINUUM-1367] - granting group admin rights for a single project doesn't seem to work * [CONTINUUM-1384] - Build error when enqueing happens during SCM update * [CONTINUUM-1391] - Missing "Download as text " link * [CONTINUUM-1393] - change sets are duplicated on multiple failed builds * [CONTINUUM-1395] - check the permissions on the add project action for ant projects * [CONTINUUM-1404] - M2 Multi module projects still build non-recursively * [CONTINUUM-1411] - Link to display build surefire report doesn't work (in fact displaying surefire report per build is false) * [CONTINUUM-1412] - File Inclusion Vulnerability * [CONTINUUM-1415] - Javascript errors with IE * [CONTINUUM-1417] - continuum group administrator role should imply user + developer too * [CONTINUUM-1418] - Groups Roles aren't added automatically at startup in the available roles list if the users list was deleted * [CONTINUUM-1420] - "Build Fresh" and Profile columns are missed in group build definitions page for specific project build definitions * [CONTINUUM-1423] - Default project group is missing from the list * [CONTINUUM-1428] - Continuum must rebuild automatically a project that was in error in the previous build even if it haven't changesin the current update * [CONTINUUM-1429] - Initial checkout does not respect 'Use cached scm credentials' setting * [CONTINUUM-1435] - Release prepare not working * [CONTINUUM-1439] - Group Summary page display error * [CONTINUUM-1445] - Impossible to add two projects with the same name even if they have differents version and/or scmUrl * [CONTINUUM-1448] - upgrade to last webwork/xwork Improvement * [CONTINUUM-406] - irc notifications: support for registered nicks * [CONTINUUM-522] - IRC support needed for IRC servers not supporting /privmsg * [CONTINUUM-1093] - After validation, logged in user is shown the login page * [CONTINUUM-1218] - Automatically determine correct POM file location in Build Definition when checking out from SCMs like ClearCase * [CONTINUUM-1278] - Need to add description and/or name to build defintion * [CONTINUUM-1279] - Need to add "Build Information" to the build result reports and notification. * [CONTINUUM-1333] - show in project group summary per project also the status counters (as they are shown on the project groups pages) * [CONTINUUM-1366] - surefire report shown is always latest, even with a different build number * [CONTINUUM-1394] - continuum should not record change sets when it is a new checkout * [CONTINUUM-1396] - Continuum should have a separate permission to administer schedules * [CONTINUUM-1409] - A bu
Re: [announce] Continuum 1.1-beta-3 is released
Better with html: http://redback.codehaus.org/integration/ldap.html Emmanuel olivier lamy a écrit : Hi, http://svn.codehaus.org/redback/redback/trunk/redback-site/src/site/apt/integration/ldap.apt -- Olivier 2007/9/26, Cla Emanuel Monsch <[EMAIL PROTECTED]>: hi there, looks nice. especially the "working copy browsing" catched my eye at a first view. :-) does anybody know, where this file ( http://svn.codehaus.org/plexus/plexus-redback/trunk/redback-site/src/site/apt/integration/ldap.apt ) has moved to? cheers cla Emmanuel Venisse wrote: The Continuum team is pleased to announce the Continuum 1.1-beta-3release Highlights are: * lot of bug fixes * xwork/webwork update to fix remote code exploit in forms * mail notification to latest committers * LDAP authentication * performance improvement You can grab the latest release from: http://maven.apache.org/continuum/download.html To upgrade from 1.1-beta-2, you can look at this guide: http://maven.apache.org/continuum/guides/mini/guide-data-management.html Below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-beta-3 : Sub-task * [CONTINUUM-1441] - Keep connection on irc server between each messages Bug * [CONTINUUM-697] - sizes incompatible with mssql (Patch Attached) * [CONTINUUM-1037] - Ant projects inherit a default build definition for Maven 2. * [CONTINUUM-1038] - Build definitions should list what type they are (ant, maven, maven2, shell) * [CONTINUUM-1041] - two defaults on the build definition page * [CONTINUUM-1181] - Continuum aborts when running Postgres under JBoss * [CONTINUUM-1296] - Continuum 1.1-alpha-1 does not copy Maven2 project pom.xml's /project/build/defaultGoal/text() value to Build Definition Goals field. * [CONTINUUM-1306] - templated roles are not added automatically if missing after upgrade * [CONTINUUM-1325] - Surefire Report history is not kept for prior builds * [CONTINUUM-1348] - jut of memory in build result * [CONTINUUM-1367] - granting group admin rights for a single project doesn't seem to work * [CONTINUUM-1384] - Build error when enqueing happens during SCM update * [CONTINUUM-1391] - Missing "Download as text " link * [CONTINUUM-1393] - change sets are duplicated on multiple failed builds * [CONTINUUM-1395] - check the permissions on the add project action for ant projects * [CONTINUUM-1404] - M2 Multi module projects still build non-recursively * [CONTINUUM-1411] - Link to display build surefire report doesn't work (in fact displaying surefire report per build is false) * [CONTINUUM-1412] - File Inclusion Vulnerability * [CONTINUUM-1415] - Javascript errors with IE * [CONTINUUM-1417] - continuum group administrator role should imply user + developer too * [CONTINUUM-1418] - Groups Roles aren't added automatically at startup in the available roles list if the users list was deleted * [CONTINUUM-1420] - "Build Fresh" and Profile columns are missed in group build definitions page for specific project build definitions * [CONTINUUM-1423] - Default project group is missing from the list * [CONTINUUM-1428] - Continuum must rebuild automatically a project that was in error in the previous build even if it haven't changesin the current update * [CONTINUUM-1429] - Initial checkout does not respect 'Use cached scm credentials' setting * [CONTINUUM-1435] - Release prepare not working * [CONTINUUM-1439] - Group Summary page display error * [CONTINUUM-1445] - Impossible to add two projects with the same name even if they have differents version and/or scmUrl * [CONTINUUM-1448] - upgrade to last webwork/xwork Improvement * [CONTINUUM-406] - irc notifications: support for registered nicks * [CONTINUUM-522] - IRC support needed for IRC servers not supporting /privmsg * [CONTINUUM-1093] - After validation, logged in user is shown the login page * [CONTINUUM-1218] - Automatically determine correct POM file location in Build Definition when checking out from SCMs like ClearCase * [CONTINUUM-1278] - Need to add description and/or name to build defintion * [CONTINUUM-1279] - Need to add "Build Information" to the build result reports and notification. * [CONTINUUM-1333] - show in project group summary per project also the status counters (as they are shown on the project groups pages) * [CONTINUUM-1366] - surefire report shown is always latest, even with a different build number * [CONTINUUM-1394] - continuum should not record change sets when it is a new checkout * [CONTINUUM-1396] - Continuum should have a separate permission to administer schedules * [CONTINUUM-1409] - A build does not say which build definition it came from * [CONTINUUM-1422] - The icon for 'Cancel Build' is missing from the legend * [CONTINUUM-1
Re: [announce] Continuum 1.1-beta-3 is released
Hi, http://svn.codehaus.org/redback/redback/trunk/redback-site/src/site/apt/integration/ldap.apt -- Olivier 2007/9/26, Cla Emanuel Monsch <[EMAIL PROTECTED]>: > > hi there, > > looks nice. especially the "working copy browsing" catched my eye at a > first view. :-) > > does anybody know, where this file > ( > http://svn.codehaus.org/plexus/plexus-redback/trunk/redback-site/src/site/apt/integration/ldap.apt > ) > has moved to? > > cheers > cla > > > > Emmanuel Venisse wrote: > > The Continuum team is pleased to announce the Continuum 1.1-beta-3release > > > > Highlights are: > > > > * lot of bug fixes > > * xwork/webwork update to fix remote code exploit in forms > > * mail notification to latest committers > > * LDAP authentication > > * performance improvement > > > > You can grab the latest release from: > > > > http://maven.apache.org/continuum/download.html > > > > To upgrade from 1.1-beta-2, you can look at this guide: > > http://maven.apache.org/continuum/guides/mini/guide-data-management.html > > > > Below is the jira release notes for this release. > > > > Release Notes - Continuum - Version 1.1-beta-3 : > > > > Sub-task > > > > * [CONTINUUM-1441] - Keep connection on irc server between each > > messages > > > > Bug > > > > * [CONTINUUM-697] - sizes incompatible with mssql (Patch Attached) > > * [CONTINUUM-1037] - Ant projects inherit a default build definition > > for Maven 2. > > * [CONTINUUM-1038] - Build definitions should list what type they > > are (ant, maven, maven2, shell) > > * [CONTINUUM-1041] - two defaults on the build definition page > > * [CONTINUUM-1181] - Continuum aborts when running Postgres under > JBoss > > * [CONTINUUM-1296] - Continuum 1.1-alpha-1 does not copy Maven2 > > project pom.xml's /project/build/defaultGoal/text() value to Build > > Definition Goals field. > > * [CONTINUUM-1306] - templated roles are not added automatically if > > missing after upgrade > > * [CONTINUUM-1325] - Surefire Report history is not kept for prior > > builds > > * [CONTINUUM-1348] - jut of memory in build result > > * [CONTINUUM-1367] - granting group admin rights for a single > > project doesn't seem to work > > * [CONTINUUM-1384] - Build error when enqueing happens during SCM > > update > > * [CONTINUUM-1391] - Missing "Download as text " link > > * [CONTINUUM-1393] - change sets are duplicated on multiple failed > > builds > > * [CONTINUUM-1395] - check the permissions on the add project action > > for ant projects > > * [CONTINUUM-1404] - M2 Multi module projects still build > > non-recursively > > * [CONTINUUM-1411] - Link to display build surefire report doesn't > > work (in fact displaying surefire report per build is false) > > * [CONTINUUM-1412] - File Inclusion Vulnerability > > * [CONTINUUM-1415] - Javascript errors with IE > > * [CONTINUUM-1417] - continuum group administrator role should imply > > user + developer too > > * [CONTINUUM-1418] - Groups Roles aren't added automatically at > > startup in the available roles list if the users list was deleted > > * [CONTINUUM-1420] - "Build Fresh" and Profile columns are missed in > > group build definitions page for specific project build definitions > > * [CONTINUUM-1423] - Default project group is missing from the list > > * [CONTINUUM-1428] - Continuum must rebuild automatically a project > > that was in error in the previous build even if it haven't changesin the > > current update > > * [CONTINUUM-1429] - Initial checkout does not respect 'Use cached > > scm credentials' setting > > * [CONTINUUM-1435] - Release prepare not working > > * [CONTINUUM-1439] - Group Summary page display error > > * [CONTINUUM-1445] - Impossible to add two projects with the same > > name even if they have differents version and/or scmUrl > > * [CONTINUUM-1448] - upgrade to last webwork/xwork > > > > Improvement > > > > * [CONTINUUM-406] - irc notifications: support for registered nicks > > * [CONTINUUM-522] - IRC support needed for IRC servers not > > supporting /privmsg > > * [CONTINUUM-1093] - After validation, logged in user is shown the > > login page > > * [CONTINUUM-1218] - Automatically determine correct POM file > > location in Build Definition when checking out from SCMs lik
Re: [announce] Continuum 1.1-beta-3 is released
hi there, looks nice. especially the "working copy browsing" catched my eye at a first view. :-) does anybody know, where this file (http://svn.codehaus.org/plexus/plexus-redback/trunk/redback-site/src/site/apt/integration/ldap.apt) has moved to? cheers cla Emmanuel Venisse wrote: The Continuum team is pleased to announce the Continuum 1.1-beta-3 release Highlights are: * lot of bug fixes * xwork/webwork update to fix remote code exploit in forms * mail notification to latest committers * LDAP authentication * performance improvement You can grab the latest release from: http://maven.apache.org/continuum/download.html To upgrade from 1.1-beta-2, you can look at this guide: http://maven.apache.org/continuum/guides/mini/guide-data-management.html Below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-beta-3 : Sub-task * [CONTINUUM-1441] - Keep connection on irc server between each messages Bug * [CONTINUUM-697] - sizes incompatible with mssql (Patch Attached) * [CONTINUUM-1037] - Ant projects inherit a default build definition for Maven 2. * [CONTINUUM-1038] - Build definitions should list what type they are (ant, maven, maven2, shell) * [CONTINUUM-1041] - two defaults on the build definition page * [CONTINUUM-1181] - Continuum aborts when running Postgres under JBoss * [CONTINUUM-1296] - Continuum 1.1-alpha-1 does not copy Maven2 project pom.xml's /project/build/defaultGoal/text() value to Build Definition Goals field. * [CONTINUUM-1306] - templated roles are not added automatically if missing after upgrade * [CONTINUUM-1325] - Surefire Report history is not kept for prior builds * [CONTINUUM-1348] - jut of memory in build result * [CONTINUUM-1367] - granting group admin rights for a single project doesn't seem to work * [CONTINUUM-1384] - Build error when enqueing happens during SCM update * [CONTINUUM-1391] - Missing "Download as text " link * [CONTINUUM-1393] - change sets are duplicated on multiple failed builds * [CONTINUUM-1395] - check the permissions on the add project action for ant projects * [CONTINUUM-1404] - M2 Multi module projects still build non-recursively * [CONTINUUM-1411] - Link to display build surefire report doesn't work (in fact displaying surefire report per build is false) * [CONTINUUM-1412] - File Inclusion Vulnerability * [CONTINUUM-1415] - Javascript errors with IE * [CONTINUUM-1417] - continuum group administrator role should imply user + developer too * [CONTINUUM-1418] - Groups Roles aren't added automatically at startup in the available roles list if the users list was deleted * [CONTINUUM-1420] - "Build Fresh" and Profile columns are missed in group build definitions page for specific project build definitions * [CONTINUUM-1423] - Default project group is missing from the list * [CONTINUUM-1428] - Continuum must rebuild automatically a project that was in error in the previous build even if it haven't changesin the current update * [CONTINUUM-1429] - Initial checkout does not respect 'Use cached scm credentials' setting * [CONTINUUM-1435] - Release prepare not working * [CONTINUUM-1439] - Group Summary page display error * [CONTINUUM-1445] - Impossible to add two projects with the same name even if they have differents version and/or scmUrl * [CONTINUUM-1448] - upgrade to last webwork/xwork Improvement * [CONTINUUM-406] - irc notifications: support for registered nicks * [CONTINUUM-522] - IRC support needed for IRC servers not supporting /privmsg * [CONTINUUM-1093] - After validation, logged in user is shown the login page * [CONTINUUM-1218] - Automatically determine correct POM file location in Build Definition when checking out from SCMs like ClearCase * [CONTINUUM-1278] - Need to add description and/or name to build defintion * [CONTINUUM-1279] - Need to add "Build Information" to the build result reports and notification. * [CONTINUUM-1333] - show in project group summary per project also the status counters (as they are shown on the project groups pages) * [CONTINUUM-1366] - surefire report shown is always latest, even with a different build number * [CONTINUUM-1394] - continuum should not record change sets when it is a new checkout * [CONTINUUM-1396] - Continuum should have a separate permission to administer schedules * [CONTINUUM-1409] - A build does not say which build definition it came from * [CONTINUUM-1422] - The icon for 'Cancel Build' is missing from the legend * [CONTINUUM-1424] - Ability to Cancel Build for a subset of a project group * [CONTINUUM-1425] - URL in Company Pom should open in a new Window * [CONTINUUM-1427] - Ability to choose the build definition for 'Build all proje
[announce] Continuum 1.1-beta-3 is released
The Continuum team is pleased to announce the Continuum 1.1-beta-3 release Highlights are: * lot of bug fixes * xwork/webwork update to fix remote code exploit in forms * mail notification to latest committers * LDAP authentication * performance improvement You can grab the latest release from: http://maven.apache.org/continuum/download.html To upgrade from 1.1-beta-2, you can look at this guide: http://maven.apache.org/continuum/guides/mini/guide-data-management.html Below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-beta-3 : Sub-task * [CONTINUUM-1441] - Keep connection on irc server between each messages Bug * [CONTINUUM-697] - sizes incompatible with mssql (Patch Attached) * [CONTINUUM-1037] - Ant projects inherit a default build definition for Maven 2. * [CONTINUUM-1038] - Build definitions should list what type they are (ant, maven, maven2, shell) * [CONTINUUM-1041] - two defaults on the build definition page * [CONTINUUM-1181] - Continuum aborts when running Postgres under JBoss * [CONTINUUM-1296] - Continuum 1.1-alpha-1 does not copy Maven2 project pom.xml's /project/build/defaultGoal/text() value to Build Definition Goals field. * [CONTINUUM-1306] - templated roles are not added automatically if missing after upgrade * [CONTINUUM-1325] - Surefire Report history is not kept for prior builds * [CONTINUUM-1348] - jut of memory in build result * [CONTINUUM-1367] - granting group admin rights for a single project doesn't seem to work * [CONTINUUM-1384] - Build error when enqueing happens during SCM update * [CONTINUUM-1391] - Missing "Download as text " link * [CONTINUUM-1393] - change sets are duplicated on multiple failed builds * [CONTINUUM-1395] - check the permissions on the add project action for ant projects * [CONTINUUM-1404] - M2 Multi module projects still build non-recursively * [CONTINUUM-1411] - Link to display build surefire report doesn't work (in fact displaying surefire report per build is false) * [CONTINUUM-1412] - File Inclusion Vulnerability * [CONTINUUM-1415] - Javascript errors with IE * [CONTINUUM-1417] - continuum group administrator role should imply user + developer too * [CONTINUUM-1418] - Groups Roles aren't added automatically at startup in the available roles list if the users list was deleted * [CONTINUUM-1420] - "Build Fresh" and Profile columns are missed in group build definitions page for specific project build definitions * [CONTINUUM-1423] - Default project group is missing from the list * [CONTINUUM-1428] - Continuum must rebuild automatically a project that was in error in the previous build even if it haven't changesin the current update * [CONTINUUM-1429] - Initial checkout does not respect 'Use cached scm credentials' setting * [CONTINUUM-1435] - Release prepare not working * [CONTINUUM-1439] - Group Summary page display error * [CONTINUUM-1445] - Impossible to add two projects with the same name even if they have differents version and/or scmUrl * [CONTINUUM-1448] - upgrade to last webwork/xwork Improvement * [CONTINUUM-406] - irc notifications: support for registered nicks * [CONTINUUM-522] - IRC support needed for IRC servers not supporting /privmsg * [CONTINUUM-1093] - After validation, logged in user is shown the login page * [CONTINUUM-1218] - Automatically determine correct POM file location in Build Definition when checking out from SCMs like ClearCase * [CONTINUUM-1278] - Need to add description and/or name to build defintion * [CONTINUUM-1279] - Need to add "Build Information" to the build result reports and notification. * [CONTINUUM-1333] - show in project group summary per project also the status counters (as they are shown on the project groups pages) * [CONTINUUM-1366] - surefire report shown is always latest, even with a different build number * [CONTINUUM-1394] - continuum should not record change sets when it is a new checkout * [CONTINUUM-1396] - Continuum should have a separate permission to administer schedules * [CONTINUUM-1409] - A build does not say which build definition it came from * [CONTINUUM-1422] - The icon for 'Cancel Build' is missing from the legend * [CONTINUUM-1424] - Ability to Cancel Build for a subset of a project group * [CONTINUUM-1425] - URL in Company Pom should open in a new Window * [CONTINUUM-1427] - Ability to choose the build definition for 'Build all projects' and 'Build Project(s)' * [CONTINUUM-1430] - Split forms for environment variables and Ant/Maven/JDK installations * [CONTINUUM-1440] - write documentation how to use continuum-data-management * [CONTINUUM-1443] - Add an 'Always build' checkbox in 'build definition'
Re: Strange Behaviors in Continuum 1.1-betas as windows service
good news, I am able to get continuum under windows services using the local user account, not the domain account On 9/19/07, Emmanuel Venisse <[EMAIL PROTECTED]> wrote: > How did you set up your service? Did you attach a real user to the service? > > continuum service works fine on win xp and seems to work on vista and server > 2003 too. > I don't have a NT to test it > > Emmanuel > > Dan Tran a écrit : > > tested with the latest continuum 1.1-beta-3 > > > > On 9/19/07, Dan Tran <[EMAIL PROTECTED]> wrote: > >> I now have svn.exe on both of my system and local path and run > >> continuum nt service using my account. But still see the same > >> problem :( > >> > >> -D > >> > >> > >> > >> On 9/14/07, Dan Tran <[EMAIL PROTECTED]> wrote: > >>> it is a good news, now I can migrate my build from 1.0.3 to 1.1 > >>> > >>> Huge thanks > >>> > >>> -D > >>> > >>> On 9/14/07, mgifos <[EMAIL PROTECTED]> wrote: > >>>> > >>>> > >>>> Dan Tran wrote: > >>>>> One more user sees this as well, so i am not alone. > >>>>> > >>>>> Any one else? > >>>>> > >>>> Me too... > >>>> > >>>> But I have a good news... > >>>> > >>>> You need %SVN_HOME%\bin entry in local %PATH% variable for a "service log > >>>> on" user. > >>>> > >>>> I hope that this will be helpful for you guys. > >>>> -- > >>>> View this message in context: > >>>> http://www.nabble.com/Strange-Behaviors-in-Continuum-1.1-betas-as-windows-service-tf4280471.html#a12685701 > >>>> Sent from the Continuum - Users mailing list archive at Nabble.com. > >>>> > >>>> > > > > > >
[announce] Continuum 1.1-beta-2 is released
The maven/Continuum team is pleased to announce the Continuum 1.1-beta-2 release Highlights are: * lot of bug fixes * Installations/profiles screens improvement * screen flow improvement in Add Project part * cancellable builds You can grab the latest release from: http://maven.apache.org/continuum/download.html Below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-beta-2 Bug * [CONTINUUM-617] - javax.jdo.JDODataStoreException: Insert request failed * [CONTINUUM-666] - Added (Jabber) Notifiers didn't persist * [CONTINUUM-927] - Internal error deleting a used schedule * [CONTINUUM-971] - Symbolic links are traversed on deletion * [CONTINUUM-1079] - show "cancel build" as disabled, not "build now" a disabled when build is in progress, but user has insufficient permissions * [CONTINUUM-1211] - Mail notification sent for Succes even though it is configured for Error, Failure and Warning only * [CONTINUUM-1265] - NullPointerException when adding modules to a project group * [CONTINUUM-1301] - JDO delete failure * [CONTINUUM-1303] - working directory in database should be a relative path so that configuration changes take effect * [CONTINUUM-1304] - cannot un-set deployment repository directory in configuration page * [CONTINUUM-1305] - after adding a project to a group from the group page, you should be returned to the group page * [CONTINUUM-1310] - "cancel build" button no longer present when a build is in progress * [CONTINUUM-1346] - Error while parsing test results * [CONTINUUM-1354] - meta refresh causes build loop * [CONTINUUM-1356] - intermittent (machine wise) test failure on trunk * [CONTINUUM-1359] - Installations removed from a profile when "Save" is clicked. * [CONTINUUM-1361] - saving a profile is confusing * [CONTINUUM-1362] - add profile page should take you to the edit page to add installations afterwards * [CONTINUUM-1369] - Profile add button does not work in IE6 * [CONTINUUM-1372] - NPE adding project group * [CONTINUUM-1373] - profile/installations pages must check users rights * [CONTINUUM-1374] - profile without jdk causes NPE in mail notification * [CONTINUUM-1375] - mail content is false regarding the profile/installations used in the build. * [CONTINUUM-1376] - Infernal gray dot is mocking me! * [CONTINUUM-1378] - Adding installations to profiles doesn't work in internet explorer, works in firefox * [CONTINUUM-1383] - "build queued" icons aren't showing up which is kind of confusing * [CONTINUUM-1385] - Foreign key konstraint violation Improvement * [CONTINUUM-980] - After deleting a project from a group, the UI flow should return to the group summary display. * [CONTINUUM-981] - "Remove" button on group actions is ambiguous and should be renamed "Delete Group" or "Remove Group". * [CONTINUUM-982] - "Project Group Actions" should be renamed "Group Actions" to avoid confusion. * [CONTINUUM-983] - There should be real "Group Actions" that affect members of the group, and can affect subsets of group members based on selection. * [CONTINUUM-1086] - First form element should have focus * [CONTINUUM-1232] - Continuum should not steal window focus on page load * [CONTINUUM-1236] - Property in a notifier element is not evaluated * [CONTINUUM-1243] - wording to explain no-build case * [CONTINUUM-1266] - Screen navigation should return to project view after adding a project to a group * [CONTINUUM-1349] - Improve "add project" screen flow * [CONTINUUM-1363] - create "automatic" profiles for each installation for simpler configuration by JDK, etc. * [CONTINUUM-1364] - should be able to configure MAVEN_OPTS for a Maven 2 installation * [CONTINUUM-1365] - unable to edit the name of an installation already created * [CONTINUUM-1368] - CLONE -Continuum doesn't work with MySQL New Feature * [CONTINUUM-990] - Pass some continuum information to build tools when executing a build Task * [CONTINUUM-1357] - release data-management with beta2
Strange Behaviors in Continuum 1.1-betas as windows service
Hello, I am seeing some strange behaviors in alpha, beta-1, and beta-2 ( still instaging area), that I hope someone can explain and/or confirm. - Unable to sync the project source when Continuum runs under NT service with a known admin user id. the build log shows Provider message: The svn command failed. Command output: --- 'svn' is not recognized as an internal or external command, operable program or batch file. --- here is log/continuum.log fragment 89674 [pool-1-thread-1] INFO org.apache.maven.scm.manager.ScmManager:default - Executing: cmd.exe /X /C '"svn --non-interactive update"' 89674 [pool-1-thread-1] INFO org.apache.maven.scm.manager.ScmManager:default - Working directory: C:\dev\continuum\working-directory\1.1\1 89736 [pool-1-thread-1] WARN org.apache.maven.continuum.scm.ContinuumScm:default - Error while updating the code for project: 'Sentinel', id: '1' to 'C:\dev\continuum\working-directory\1.1\1'. 89736 [pool-1-thread-1] WARN org.apache.maven.continuum.scm.ContinuumScm:default - Command output: 'svn' is not recognized as an internal or external command, operable program or batch file. However, there is no build problem when starting Continuum from commandline ( with the same login account) the SVN.exe definitely is in the SYSTEM path - There is no build problem when use with local SYSTEM account. The local repo ends up at c:\.m2\repository. This is not a viable workaround since my InstallAnywhere Installer requires a valid account due to licensing. Any suggestion is greatly appreciated. -D
RE: Continuum 1.1-beta-1 profile does not seem to work
Thank you Olivier, but I already understood this. My problem was a little bit different seeing that I was not able to add correctly any installation, it was the ADD button which introduce the NPE, not the SAVE button. But I found the solution: my Firefox version was not good, I installed the 2.0.0.6 version and now, it works correctly with your workflow. Thanks, Rémi. "LAMY Olivier" <[EMAIL PROTECTED]> 09/08/2007 10:34 Veuillez répondre à [EMAIL PROTECTED] A <[EMAIL PROTECTED]> cc Objet RE: Continuum 1.1-beta-1 profile does not seem to work Hi, Until the next release, you have to use the following workflow : Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list Here don't use the save button but go the Profile List with the link in the left menu. [1] You will see the profile with the attached installation. Concerning IE, there is an issue it's fixed in trunk [2]. -- Olivier [1] http://jira.codehaus.org/browse/CONTINUUM-1361 [2] http://jira.codehaus.org/browse/CONTINUUM-1369 -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Envoyé : jeudi 9 août 2007 10:15 À : [EMAIL PROTECTED] Objet : RE: Continuum 1.1-beta-1 profile does not seem to work Hi, and sorry to disturb you again, I see you understood my problem, I can't click on the save button, the NPE appears before : Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list (I try but NPE here) Am I the only one to have this problem? I saw that there is a problem with IE, may be I have a problem with Firefox. In fact, I have some minor problems with the webapp on Firefox: logos don't appear on the right place and the size of the window is not optimized whereas it is with IE. I installed Flash Player 8 but nothing has changed... May be these problems are linked to the NPE? What do you think about that? Thanks,Rémi. "LAMY Olivier" <[EMAIL PROTECTED]> 08/08/2007 18:36 Veuillez répondre à [EMAIL PROTECTED] A <[EMAIL PROTECTED]> cc Objet RE: Continuum 1.1-beta-1 profile does not seem to work Just to be sure Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list Here you click on save button ? If yes the NPE is fixed in trunk and will be in beta-2. -- Olivier -Message d'origine- De : fherrerav [mailto:[EMAIL PROTECTED] Envoyé : mercredi 8 août 2007 18:30 À : [EMAIL PROTECTED] Objet : RE: Continuum 1.1-beta-1 profile does not seem to work I get the same NPE Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list -> NPE Server: Red Hat Client Browser: Opera Note: Only 1 profile and 1 installation defined java.lang.NullPointerException at org.apache.maven.continuum.web.action.admin.ProfileAction.addInstallation(ProfileAction.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.opensymphony.xwork.DefaultActionInvocation.invokeAction(DefaultActionInvocation.java:364) at com.opensymphony.xwork.DefaultActionInvocation.invokeActionOnly(DefaultActionInvocation.java:216) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:190) at com.opensymphony.xwork.interceptor.DefaultWorkflowInterceptor.doIntercept(DefaultWorkflowInterceptor.java:168) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.validator.ValidationInterceptor.doIntercept(ValidationInterceptor.java:115) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.apache.maven.continuum.web.interceptor.ForceContinuumConfigurationInterceptor.intercept(ForceContinuumConfigurationInterceptor.java:72) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.codehaus.plexus.redback.xwork.interceptor.PolicyEnforcementInterceptor.intercept(PolicyEnforcementInterceptor.java:103) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) LAMY Olivier wro
Java for Continuum 1.1-beta-2
Which version of Java 1.5 should I use with Continuum 1.1-beta-2? Thank you. This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. [v.E.1]
RE: Continuum 1.1-beta-1 profile does not seem to work
Just to be sure Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list Here you click on save button ? If yes the NPE is fixed in trunk and will be in beta-2. -- Olivier -Message d'origine- De : fherrerav [mailto:[EMAIL PROTECTED] Envoyé : mercredi 8 août 2007 18:30 À : [EMAIL PROTECTED] Objet : RE: Continuum 1.1-beta-1 profile does not seem to work I get the same NPE Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list -> NPE Server: Red Hat Client Browser: Opera Note: Only 1 profile and 1 installation defined java.lang.NullPointerException at org.apache.maven.continuum.web.action.admin.ProfileAction.addInstallation(ProfileAction.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.opensymphony.xwork.DefaultActionInvocation.invokeAction(DefaultActionInvocation.java:364) at com.opensymphony.xwork.DefaultActionInvocation.invokeActionOnly(DefaultActionInvocation.java:216) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:190) at com.opensymphony.xwork.interceptor.DefaultWorkflowInterceptor.doIntercept(DefaultWorkflowInterceptor.java:168) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.validator.ValidationInterceptor.doIntercept(ValidationInterceptor.java:115) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.apache.maven.continuum.web.interceptor.ForceContinuumConfigurationInterceptor.intercept(ForceContinuumConfigurationInterceptor.java:72) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.codehaus.plexus.redback.xwork.interceptor.PolicyEnforcementInterceptor.intercept(PolicyEnforcementInterceptor.java:103) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) LAMY Olivier wrote: > > I think it's due to CONTINUUM-1361. > > Rewrite the end of the workflow ;-) > > - Edit profile, add an installation, go to Profiles List > > -- > Olivier > > -Message d'origine- > De : Stephane Nicoll [mailto:[EMAIL PROTECTED] > Envoyé : mardi 7 août 2007 12:11 > À : [EMAIL PROTECTED] > Objet : Re: Continuum 1.1-beta-1 profile does not seem to work > > - Firefox > - Login as admin > - Profiles, add profiles, give a name, save > - Edit profile, add an installation, save -> NPE > > But the profile is there with the installation. Note I never restarted > the service so it's maybe not saved at all (and in a transient cache > or something). > > Stéphane > > On 8/7/07, Emmanuel Venisse <[EMAIL PROTECTED]> wrote: >> What is the process to reproduce it? >> >> Stephane Nicoll a écrit : >> > Hey, >> > >> > I've also a NPE (see below) but I'm able to create the build >> > profile anyway. I'm on 1.1-beta-1, war version on tomcat 5.5.23/JDK5. >> > >> > Cheers, >> > Stéphane >> > >> > 12790974 [TP-Processor6] INFO >> > com.opensymphony.xwork.interceptor.Interceptor:exceptionLogging - >> > Error ocurred during execution java.lang.NullPointerException >> > at >> org.jpox.state.StateManagerImpl.internalMakePersistent(StateManagerIm >> pl.java:3667) >> > at >> org.jpox.state.StateManagerImpl.makePersistent(StateManagerImpl.java: >> 3646) >> > at >> org.jpox.AbstractPersistenceManager.internalMakePersistent(AbstractPe >> rsistenceManager.java:1202) >> > at >> org.jpox.AbstractPersistenceManager.makePersistent(AbstractPersistenc >> eManager.java:1261) >> > at >> org.codehaus.plexus.jdo.PlexusJdoUtils.updateObject(PlexusJdoUtils.ja >> va:160) >> > at >> org.apache.maven.continuum.store.JdoContinuumStore.updateObject(JdoCo >> ntinuumStore.java:843) >> > at >> org.apache.maven.continuum.store.JdoContinuumStore.updateObject(JdoCo >> ntinuumStore.java:835) >> > at >> org.apache.maven.continuum.s
Re: Continuum 1.1-beta-1 profile does not seem to work
Fixed in trunk fherrerav a écrit : I get the same NPE Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list -> NPE Server: Red Hat Client Browser: Opera Note: Only 1 profile and 1 installation defined java.lang.NullPointerException at org.apache.maven.continuum.web.action.admin.ProfileAction.addInstallation(ProfileAction.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.opensymphony.xwork.DefaultActionInvocation.invokeAction(DefaultActionInvocation.java:364) at com.opensymphony.xwork.DefaultActionInvocation.invokeActionOnly(DefaultActionInvocation.java:216) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:190) at com.opensymphony.xwork.interceptor.DefaultWorkflowInterceptor.doIntercept(DefaultWorkflowInterceptor.java:168) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.validator.ValidationInterceptor.doIntercept(ValidationInterceptor.java:115) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.apache.maven.continuum.web.interceptor.ForceContinuumConfigurationInterceptor.intercept(ForceContinuumConfigurationInterceptor.java:72) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.codehaus.plexus.redback.xwork.interceptor.PolicyEnforcementInterceptor.intercept(PolicyEnforcementInterceptor.java:103) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) LAMY Olivier wrote: I think it's due to CONTINUUM-1361. Rewrite the end of the workflow ;-) - Edit profile, add an installation, go to Profiles List -- Olivier -Message d'origine- De : Stephane Nicoll [mailto:[EMAIL PROTECTED] Envoyé : mardi 7 août 2007 12:11 À : [EMAIL PROTECTED] Objet : Re: Continuum 1.1-beta-1 profile does not seem to work - Firefox - Login as admin - Profiles, add profiles, give a name, save - Edit profile, add an installation, save -> NPE But the profile is there with the installation. Note I never restarted the service so it's maybe not saved at all (and in a transient cache or something). Stéphane On 8/7/07, Emmanuel Venisse <[EMAIL PROTECTED]> wrote: What is the process to reproduce it? Stephane Nicoll a écrit : Hey, I've also a NPE (see below) but I'm able to create the build profile anyway. I'm on 1.1-beta-1, war version on tomcat 5.5.23/JDK5. Cheers, Stéphane 12790974 [TP-Processor6] INFO com.opensymphony.xwork.interceptor.Interceptor:exceptionLogging - Error ocurred during execution java.lang.NullPointerException at org.jpox.state.StateManagerImpl.internalMakePersistent(StateManagerImpl.java:3667) at org.jpox.state.StateManagerImpl.makePersistent(StateManagerImpl.java:3646) at org.jpox.AbstractPersistenceManager.internalMakePersistent(AbstractPersistenceManager.java:1202) at org.jpox.AbstractPersistenceManager.makePersistent(AbstractPersistenceManager.java:1261) at org.codehaus.plexus.jdo.PlexusJdoUtils.updateObject(PlexusJdoUtils.java:160) at org.apache.maven.continuum.store.JdoContinuumStore.updateObject(JdoContinuumStore.java:843) at org.apache.maven.continuum.store.JdoContinuumStore.updateObject(JdoContinuumStore.java:835) at org.apache.maven.continuum.store.JdoContinuumStore.updateProfile(JdoContinuumStore.java:1226) at org.apache.maven.continuum.profile.DefaultProfileService.updateProfile(DefaultProfileService.java:62) at org.apache.maven.continuum.web.action.admin.ProfileAction.save(Profi leAction.java:122) On 8/7/07, Emmanuel Venisse <[EMAIL PROTECTED]> wrote: What are your installations? profiles with installations associated? [EMAIL PROTECTED] a écrit : Hi, I already wrote a message about that. I can't add any installation to a profile : with IE the add button doesn't work and with Firefox, when I click on the add button I obtain a java.lang.NullPointerException (with this stack trace : ). My problem is a little different, I can't access anything after adding installations seeing that I can't add these installations. Does anyone have the same problem? Any suggestion or idea? Thanks in advance, Rémi. *"LAMY Olivier&
RE: Continuum 1.1-beta-1 profile does not seem to work
I get the same NPE Add installation (jdk1.6.0) -> Add profile (JDK1.6)->Edit profile->Add the new installation from list -> NPE Server: Red Hat Client Browser: Opera Note: Only 1 profile and 1 installation defined java.lang.NullPointerException at org.apache.maven.continuum.web.action.admin.ProfileAction.addInstallation(ProfileAction.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.opensymphony.xwork.DefaultActionInvocation.invokeAction(DefaultActionInvocation.java:364) at com.opensymphony.xwork.DefaultActionInvocation.invokeActionOnly(DefaultActionInvocation.java:216) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:190) at com.opensymphony.xwork.interceptor.DefaultWorkflowInterceptor.doIntercept(DefaultWorkflowInterceptor.java:168) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.validator.ValidationInterceptor.doIntercept(ValidationInterceptor.java:115) at com.opensymphony.xwork.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.apache.maven.continuum.web.interceptor.ForceContinuumConfigurationInterceptor.intercept(ForceContinuumConfigurationInterceptor.java:72) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.codehaus.plexus.redback.xwork.interceptor.PolicyEnforcementInterceptor.intercept(PolicyEnforcementInterceptor.java:103) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) LAMY Olivier wrote: > > I think it's due to CONTINUUM-1361. > > Rewrite the end of the workflow ;-) > > - Edit profile, add an installation, go to Profiles List > > -- > Olivier > > -Message d'origine- > De : Stephane Nicoll [mailto:[EMAIL PROTECTED] > Envoyé : mardi 7 août 2007 12:11 > À : [EMAIL PROTECTED] > Objet : Re: Continuum 1.1-beta-1 profile does not seem to work > > - Firefox > - Login as admin > - Profiles, add profiles, give a name, save > - Edit profile, add an installation, save -> NPE > > But the profile is there with the installation. Note I never restarted the > service so it's maybe not saved at all (and in a transient cache or > something). > > Stéphane > > On 8/7/07, Emmanuel Venisse <[EMAIL PROTECTED]> wrote: >> What is the process to reproduce it? >> >> Stephane Nicoll a écrit : >> > Hey, >> > >> > I've also a NPE (see below) but I'm able to create the build profile >> > anyway. I'm on 1.1-beta-1, war version on tomcat 5.5.23/JDK5. >> > >> > Cheers, >> > Stéphane >> > >> > 12790974 [TP-Processor6] INFO >> > com.opensymphony.xwork.interceptor.Interceptor:exceptionLogging - >> > Error ocurred during execution java.lang.NullPointerException >> > at >> org.jpox.state.StateManagerImpl.internalMakePersistent(StateManagerImpl.java:3667) >> > at >> org.jpox.state.StateManagerImpl.makePersistent(StateManagerImpl.java:3646) >> > at >> org.jpox.AbstractPersistenceManager.internalMakePersistent(AbstractPersistenceManager.java:1202) >> > at >> org.jpox.AbstractPersistenceManager.makePersistent(AbstractPersistenceManager.java:1261) >> > at >> org.codehaus.plexus.jdo.PlexusJdoUtils.updateObject(PlexusJdoUtils.java:160) >> > at >> org.apache.maven.continuum.store.JdoContinuumStore.updateObject(JdoContinuumStore.java:843) >> > at >> org.apache.maven.continuum.store.JdoContinuumStore.updateObject(JdoContinuumStore.java:835) >> > at >> org.apache.maven.continuum.store.JdoContinuumStore.updateProfile(JdoContinuumStore.java:1226) >> > at >> org.apache.maven.continuum.profile.DefaultProfileService.updateProfile(DefaultProfileService.java:62) >> > at >> > org.apache.maven.continuum.web.action.admin.ProfileAction.save(Profi >> > leAction.java:122) >> > >> > >> > On 8/7/07, Emmanuel Venisse <[EMAIL PROTECTED]> wrote: >> >> What are your installations? profiles wi
Re: continuum-1.1-beta-1: Build succeeded or failed ???
This worked just fine, thanks! On 8/7/07, Madsen,Bryan <[EMAIL PROTECTED]> wrote: > > It is a known issue in 2.0.7. http://jira.codehaus.org/browse/MNG-3084 > > You can update the bat file in your local install as described in the bug > and it will start working. > > Bryan > > -Original Message- > From: LAMY Olivier [mailto:[EMAIL PROTECTED] > Sent: Tuesday, August 07, 2007 4:09 PM > To: [EMAIL PROTECTED] > Subject: RE: continuum-1.1-beta-1: Build succeeded or failed ??? > > Have you tried with mvn 2.0.6 or 2.0.5 ? > > What is your OS ? > If windows I think there is an issue with mvn.bat concerning cli return > code (MAVEN_TERMINATE_CMD ) (don't remember the issue id) > > -- > Olivier > > > > De : Poli García [mailto:[EMAIL PROTECTED] > Envoyé : mardi 7 août 2007 23:04 > À : [EMAIL PROTECTED] > Objet : continuum-1.1-beta-1: Build succeeded or failed ??? > > > Hi ! > I've just installed Continuum 1.1 beta1 and noticed a strange > behaviour when building my app. The thing is that continuum says it has > built correctly, but the build has failed because a dependency cannot be > found in the repository. See the attached image for this. I had to censor > some fields of the attachment because of confidentiality, but I can say that > we're using maven 2.0.7 and a wagon version branched from the version you > can see on the on the screen shot. > > Has this happened to some of you guys before ? > > Regards > > -- > Poli García > > > This e-mail, any attachments and the information contained therein ("this > message") are confidential and intended solely for the use of the > addressee(s). If you have received this message in error please send it back > to the sender and delete it. Unauthorized publication, use, dissemination or > disclosure of this message, either in whole or in part is strictly > prohibited. > ** > Ce message électronique et tous les fichiers joints ainsi que les > informations contenues dans ce message ( ci après "le message" ), sont > confidentiels et destinés exclusivement à l'usage de la personne à laquelle > ils sont adressés. Si vous avez reçu ce message par erreur, merci de le > renvoyer à son émetteur et de le détruire. Toutes diffusion, publication, > totale ou partielle ou divulgation sous quelque forme que se soit non > expressément autorisées de ce message, sont interdites. > ** > > -- > CONFIDENTIALITY NOTICE This message and any included attachments are from > Cerner Corporation and are intended only for the addressee. The information > contained in this message is confidential and may constitute inside or > non-public information under international, federal, or state securities > laws. Unauthorized forwarding, printing, copying, distribution, or use of > such information is strictly prohibited and may be unlawful. If you are not > the addressee, please promptly delete this message and notify the sender of > the delivery error by e-mail or you may call Cerner's corporate offices in > Kansas City, Missouri, U.S.A at (+1) (816)221-1024. Cerner Limited, > Registered in England no 2519305, Registered Office 37 North Wharf Road, > London W2 1AF. > -- Poli García
Re: [continuum-1.1-beta-1] pb with Synergy SCM
It isn't a problem with the command execution process because all other commands (mvn, ant, svn, cvs...) works fine. Maybe it's a change in maven-scm done between maven-scm 1.0-beta-4 and 1.0 final David, can you explain this message? Exception: Cannot checkout sources. Exception while executing SCM command. Commandeline = cmd.exe /X /C '"ccm sync -r -p "Query expression must be specified.""' STDOUT = Project reference requires name and version optionally followed by instance: 'Query expression must be specified.' STDERR = Warning: Unable to identify project. What would be the correct command to run? dvicente a écrit : Windows 2000 Advanced Server ;-(( Emmanuel Venisse wrote: Randall, David, What is your OS? dvicente a écrit : no i haven't seen your earlier post but it seems the same problem with Synergy. Thanks you for your answer Randall Fidler wrote: Hi David, Not sure if you saw the earlier post by myself and another person but the same situation happened with Perforce SCM; upgraded to the latest beta and nothing works since. It seems like it just doesn't execute the actual scm commands properly in this latest version. Regards, Randall -Original Message- From: david vicente [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 08, 2007 1:42 AM To: [EMAIL PROTECTED] Subject: [continuum-1.1-beta-1] pb with Synergy SCM Hi all, I used Continuum 1.0.3 with Synergy (with maven-SCM-api-1.0-beta-4.jar and maven-SCM-provider-synergy-1.0-beta-4.jar in my \ lib) and all works fine. I have just continuum-1.1-beta-1 and nothing works since. it does not manage to extract the sources. In Continuum.log, I have that : 339122 [SocketListener0-0] INFO org.apache.maven.continuum.Continuum:default - Enqueuing 'VignetteOffre' (Build definition id=2). 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Initializing build 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Starting build of VignetteOffre 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Updating working dir 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action check-working-directory 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action checkout-project 339638 [pool-1-thread-1] INFO org.apache.maven.continuum.scm.ContinuumScm:default - Checking out project: 'VignetteOffre', id: '1' to 'I:\DONNEES\DATA\continuum- 1.1\working-directory\1'. 348091 [pool-1-thread-1] INFO org.apache.maven.scm.manager.ScmManager:default - A working project already exists [Query expression must be specified.]. 354857 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 354935 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building and my build result traces : Exception: Cannot checkout sources. Exception while executing SCM command. Commandeline = cmd.exe /X /C '"ccm sync -r -p "Query expression must be specified.""' STDOUT = Project reference requires name and version optionally followed by instance: 'Query expression must be specified.' STDERR = Warning: Unable to identify project. I try to set level log to DEBUG but nothing more could you help me ? David Vicente
Re: jpox/jdo stuff in continuum 1.1-beta
It is always in application.xml but the location of this file isn't the same. The new location is apps/continuum/webapp/WEB-INF/classes/META-INF/plexus/application.xml Emmanuel Cla Emanuel Monsch a écrit : hi i've two questions about 1.1-beta-1 * does anybody know how to activate the logging for jpox? * in continuum 1.0.3 within the application.xml configuration file i was able to adjust the jpox/jdo configuration by changing some properties. for example the table prefix. org.jpox.identifier.tablePrefix continuum3 is there a way to do this in continuum 1.1-beta-1? thanks for your help! cla
Re: [continuum-1.1-beta-1] pb with Synergy SCM
Windows 2000 Advanced Server ;-(( Emmanuel Venisse wrote: > > Randall, David, > > What is your OS? > > dvicente a écrit : >> no i haven't seen your earlier post but it seems the same problem with >> Synergy. >> >> Thanks you for your answer >> >> Randall Fidler wrote: >>> Hi David, >>> >>> Not sure if you saw the earlier post by myself and another >>> person but the same situation happened with Perforce SCM; upgraded to >>> the latest beta and nothing works since. It seems like it just doesn't >>> execute the actual scm commands properly in this latest version. >>> >>> Regards, >>> >>> Randall >>> >>> >>> -Original Message- >>> From: david vicente [mailto:[EMAIL PROTECTED] >>> Sent: Wednesday, August 08, 2007 1:42 AM >>> To: [EMAIL PROTECTED] >>> Subject: [continuum-1.1-beta-1] pb with Synergy SCM >>> >>> Hi all, >>> >>> I used Continuum 1.0.3 with Synergy (with maven-SCM-api-1.0-beta-4.jar >>> and >>> maven-SCM-provider-synergy-1.0-beta-4.jar in my \ lib) and all works >>> fine. >>> >>> I have just continuum-1.1-beta-1 and nothing works since. >>> >>> it does not manage to extract the sources. >>> >>> In Continuum.log, I have that : >>> >>> 339122 [SocketListener0-0] INFO >>> org.apache.maven.continuum.Continuum:default - Enqueuing >>> 'VignetteOffre' >>> (Build definition id=2). >>> 339169 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.buildcontroller.BuildController:default - >>> Initializing build >>> 339169 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.buildcontroller.BuildController:default - >>> Starting build of VignetteOffre >>> 339435 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.buildcontroller.BuildController:default - >>> Updating working dir >>> 339435 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.buildcontroller.BuildController:default - >>> Performing action check-working-directory >>> 339435 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.buildcontroller.BuildController:default - >>> Performing action checkout-project >>> 339638 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.scm.ContinuumScm:default - Checking out >>> project: >>> 'VignetteOffre', id: '1' to 'I:\DONNEES\DATA\continuum- >>> 1.1\working-directory\1'. >>> 348091 [pool-1-thread-1] INFO >>> org.apache.maven.scm.manager.ScmManager:default - A working project >>> already >>> exists [Query expression must be specified.]. >>> 354857 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.buildcontroller.BuildController:default - >>> Merging SCM results >>> 354935 [pool-1-thread-1] INFO >>> org.apache.maven.continuum.buildcontroller.BuildController:default - >>> Error >>> updating from SCM, not building >>> >>> and my build result traces : >>> >>> Exception: >>> Cannot checkout sources. >>> Exception while executing SCM command. >>> Commandeline = cmd.exe /X /C '"ccm sync -r -p "Query expression must be >>> specified.""' >>> STDOUT = Project reference requires name and version optionally followed >>> by >>> instance: 'Query expression must be specified.' >>> >>> STDERR = Warning: Unable to identify project. >>> >>> I try to set level log to DEBUG but nothing more >>> >>> could you help me ? >>> >>> David Vicente >>> >>> >> > > > -- View this message in context: http://www.nabble.com/-continuum-1.1-beta-1--pb-with-Synergy-SCM-tf4235149.html#a12052553 Sent from the Continuum - Users mailing list archive at Nabble.com.
RE: [continuum-1.1-beta-1] pb with Synergy SCM
Emmanuel, We've got Continuum running on Ubuntu Linux. Regards, Randall -Original Message- From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 08, 2007 5:49 AM To: [EMAIL PROTECTED] Subject: Re: [continuum-1.1-beta-1] pb with Synergy SCM Randall, David, What is your OS? dvicente a écrit : > no i haven't seen your earlier post but it seems the same problem with > Synergy. > > Thanks you for your answer > > Randall Fidler wrote: >> Hi David, >> >> Not sure if you saw the earlier post by myself and another >> person but the same situation happened with Perforce SCM; upgraded to >> the latest beta and nothing works since. It seems like it just doesn't >> execute the actual scm commands properly in this latest version. >> >> Regards, >> >> Randall >> >> >> -Original Message- >> From: david vicente [mailto:[EMAIL PROTECTED] >> Sent: Wednesday, August 08, 2007 1:42 AM >> To: [EMAIL PROTECTED] >> Subject: [continuum-1.1-beta-1] pb with Synergy SCM >> >> Hi all, >> >> I used Continuum 1.0.3 with Synergy (with maven-SCM-api-1.0-beta-4.jar >> and >> maven-SCM-provider-synergy-1.0-beta-4.jar in my \ lib) and all works >> fine. >> >> I have just continuum-1.1-beta-1 and nothing works since. >> >> it does not manage to extract the sources. >> >> In Continuum.log, I have that : >> >> 339122 [SocketListener0-0] INFO >> org.apache.maven.continuum.Continuum:default - Enqueuing >> 'VignetteOffre' >> (Build definition id=2). >> 339169 [pool-1-thread-1] INFO >> org.apache.maven.continuum.buildcontroller.BuildController:default - >> Initializing build >> 339169 [pool-1-thread-1] INFO >> org.apache.maven.continuum.buildcontroller.BuildController:default - >> Starting build of VignetteOffre >> 339435 [pool-1-thread-1] INFO >> org.apache.maven.continuum.buildcontroller.BuildController:default - >> Updating working dir >> 339435 [pool-1-thread-1] INFO >> org.apache.maven.continuum.buildcontroller.BuildController:default - >> Performing action check-working-directory >> 339435 [pool-1-thread-1] INFO >> org.apache.maven.continuum.buildcontroller.BuildController:default - >> Performing action checkout-project >> 339638 [pool-1-thread-1] INFO >> org.apache.maven.continuum.scm.ContinuumScm:default - Checking out >> project: >> 'VignetteOffre', id: '1' to 'I:\DONNEES\DATA\continuum- >> 1.1\working-directory\1'. >> 348091 [pool-1-thread-1] INFO >> org.apache.maven.scm.manager.ScmManager:default - A working project >> already >> exists [Query expression must be specified.]. >> 354857 [pool-1-thread-1] INFO >> org.apache.maven.continuum.buildcontroller.BuildController:default - >> Merging SCM results >> 354935 [pool-1-thread-1] INFO >> org.apache.maven.continuum.buildcontroller.BuildController:default - >> Error >> updating from SCM, not building >> >> and my build result traces : >> >> Exception: >> Cannot checkout sources. >> Exception while executing SCM command. >> Commandeline = cmd.exe /X /C '"ccm sync -r -p "Query expression must be >> specified.""' >> STDOUT = Project reference requires name and version optionally followed >> by >> instance: 'Query expression must be specified.' >> >> STDERR = Warning: Unable to identify project. >> >> I try to set level log to DEBUG but nothing more >> >> could you help me ? >> >> David Vicente >> >> >
Re: [continuum-1.1-beta-1] pb with Synergy SCM
Randall, David, What is your OS? dvicente a écrit : no i haven't seen your earlier post but it seems the same problem with Synergy. Thanks you for your answer Randall Fidler wrote: Hi David, Not sure if you saw the earlier post by myself and another person but the same situation happened with Perforce SCM; upgraded to the latest beta and nothing works since. It seems like it just doesn't execute the actual scm commands properly in this latest version. Regards, Randall -Original Message- From: david vicente [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 08, 2007 1:42 AM To: [EMAIL PROTECTED] Subject: [continuum-1.1-beta-1] pb with Synergy SCM Hi all, I used Continuum 1.0.3 with Synergy (with maven-SCM-api-1.0-beta-4.jar and maven-SCM-provider-synergy-1.0-beta-4.jar in my \ lib) and all works fine. I have just continuum-1.1-beta-1 and nothing works since. it does not manage to extract the sources. In Continuum.log, I have that : 339122 [SocketListener0-0] INFO org.apache.maven.continuum.Continuum:default - Enqueuing 'VignetteOffre' (Build definition id=2). 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Initializing build 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Starting build of VignetteOffre 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Updating working dir 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action check-working-directory 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action checkout-project 339638 [pool-1-thread-1] INFO org.apache.maven.continuum.scm.ContinuumScm:default - Checking out project: 'VignetteOffre', id: '1' to 'I:\DONNEES\DATA\continuum- 1.1\working-directory\1'. 348091 [pool-1-thread-1] INFO org.apache.maven.scm.manager.ScmManager:default - A working project already exists [Query expression must be specified.]. 354857 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 354935 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building and my build result traces : Exception: Cannot checkout sources. Exception while executing SCM command. Commandeline = cmd.exe /X /C '"ccm sync -r -p "Query expression must be specified.""' STDOUT = Project reference requires name and version optionally followed by instance: 'Query expression must be specified.' STDERR = Warning: Unable to identify project. I try to set level log to DEBUG but nothing more could you help me ? David Vicente
Re: [continuum-1.1-beta-1] pb with Synergy SCM
As we don't have lot of Synergy users and we don't have it to test, I think you'll need to look at maven-scm code (I don't think it's a continuum pb) to resolve this issue. sorry. Emmanuel david vicente a écrit : Hi all, I used Continuum 1.0.3 with Synergy (with maven-SCM-api-1.0-beta-4.jar and maven-SCM-provider-synergy-1.0-beta-4.jar in my \ lib) and all works fine. I have just continuum-1.1-beta-1 and nothing works since. it does not manage to extract the sources. In Continuum.log, I have that : 339122 [SocketListener0-0] INFO org.apache.maven.continuum.Continuum:default - Enqueuing 'VignetteOffre' (Build definition id=2). 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Initializing build 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Starting build of VignetteOffre 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Updating working dir 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action check-working-directory 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action checkout-project 339638 [pool-1-thread-1] INFO org.apache.maven.continuum.scm.ContinuumScm:default - Checking out project: 'VignetteOffre', id: '1' to 'I:\DONNEES\DATA\continuum- 1.1\working-directory\1'. 348091 [pool-1-thread-1] INFO org.apache.maven.scm.manager.ScmManager:default - A working project already exists [Query expression must be specified.]. 354857 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 354935 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building and my build result traces : Exception: Cannot checkout sources. Exception while executing SCM command. Commandeline = cmd.exe /X /C '"ccm sync -r -p "Query expression must be specified.""' STDOUT = Project reference requires name and version optionally followed by instance: 'Query expression must be specified.' STDERR = Warning: Unable to identify project. I try to set level log to DEBUG but nothing more could you help me ? David Vicente
[continuum-1.1-beta-1] pb with Synergy SCM
Hi all, I used Continuum 1.0.3 with Synergy (with maven-SCM-api-1.0-beta-4.jar and maven-SCM-provider-synergy-1.0-beta-4.jar in my \ lib) and all works fine. I have just continuum-1.1-beta-1 and nothing works since. it does not manage to extract the sources. In Continuum.log, I have that : 339122 [SocketListener0-0] INFO org.apache.maven.continuum.Continuum:default - Enqueuing 'VignetteOffre' (Build definition id=2). 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Initializing build 339169 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Starting build of VignetteOffre 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Updating working dir 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action check-working-directory 339435 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Performing action checkout-project 339638 [pool-1-thread-1] INFO org.apache.maven.continuum.scm.ContinuumScm:default - Checking out project: 'VignetteOffre', id: '1' to 'I:\DONNEES\DATA\continuum- 1.1\working-directory\1'. 348091 [pool-1-thread-1] INFO org.apache.maven.scm.manager.ScmManager:default - A working project already exists [Query expression must be specified.]. 354857 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Merging SCM results 354935 [pool-1-thread-1] INFO org.apache.maven.continuum.buildcontroller.BuildController:default - Error updating from SCM, not building and my build result traces : Exception: Cannot checkout sources. Exception while executing SCM command. Commandeline = cmd.exe /X /C '"ccm sync -r -p "Query expression must be specified.""' STDOUT = Project reference requires name and version optionally followed by instance: 'Query expression must be specified.' STDERR = Warning: Unable to identify project. I try to set level log to DEBUG but nothing more could you help me ? David Vicente
RE: continuum-1.1-beta-1: Build succeeded or failed ???
It is a known issue in 2.0.7. http://jira.codehaus.org/browse/MNG-3084 You can update the bat file in your local install as described in the bug and it will start working. Bryan -Original Message- From: LAMY Olivier [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 07, 2007 4:09 PM To: [EMAIL PROTECTED] Subject: RE: continuum-1.1-beta-1: Build succeeded or failed ??? Have you tried with mvn 2.0.6 or 2.0.5 ? What is your OS ? If windows I think there is an issue with mvn.bat concerning cli return code (MAVEN_TERMINATE_CMD ) (don't remember the issue id) -- Olivier De : Poli García [mailto:[EMAIL PROTECTED] Envoyé : mardi 7 août 2007 23:04 À : [EMAIL PROTECTED] Objet : continuum-1.1-beta-1: Build succeeded or failed ??? Hi ! I've just installed Continuum 1.1 beta1 and noticed a strange behaviour when building my app. The thing is that continuum says it has built correctly, but the build has failed because a dependency cannot be found in the repository. See the attached image for this. I had to censor some fields of the attachment because of confidentiality, but I can say that we're using maven 2.0.7 and a wagon version branched from the version you can see on the on the screen shot. Has this happened to some of you guys before ? Regards -- Poli García This e-mail, any attachments and the information contained therein ("this message") are confidential and intended solely for the use of the addressee(s). If you have received this message in error please send it back to the sender and delete it. Unauthorized publication, use, dissemination or disclosure of this message, either in whole or in part is strictly prohibited. ** Ce message électronique et tous les fichiers joints ainsi que les informations contenues dans ce message ( ci après "le message" ), sont confidentiels et destinés exclusivement à l'usage de la personne à laquelle ils sont adressés. Si vous avez reçu ce message par erreur, merci de le renvoyer à son émetteur et de le détruire. Toutes diffusion, publication, totale ou partielle ou divulgation sous quelque forme que se soit non expressément autorisées de ce message, sont interdites. ** -- CONFIDENTIALITY NOTICE This message and any included attachments are from Cerner Corporation and are intended only for the addressee. The information contained in this message is confidential and may constitute inside or non-public information under international, federal, or state securities laws. Unauthorized forwarding, printing, copying, distribution, or use of such information is strictly prohibited and may be unlawful. If you are not the addressee, please promptly delete this message and notify the sender of the delivery error by e-mail or you may call Cerner's corporate offices in Kansas City, Missouri, U.S.A at (+1) (816)221-1024. Cerner Limited, Registered in England no 2519305, Registered Office 37 North Wharf Road, London W2 1AF.
Re: Continuum 1.1-beta-1 auto refresh can cause repeated builds.
It's a known issue that will be fixed in beta-2 Emmanuel Madsen,Bryan a écrit : I like the auto refresh feature and tend to leave continuum up on the project group summary page while doing other work. Today I forced a build for a project on one of the project group pages and left my browser on that page. I checked my build emails later and found that project had built 8 times since I forced the initial build. This seems very similar to using the browser refresh so it may be good to make an extra mouse click after forcing a build. Bryan -- CONFIDENTIALITY NOTICE This message and any included attachments are from Cerner Corporation and are intended only for the addressee. The information contained in this message is confidential and may constitute inside or non-public information under international, federal, or state securities laws. Unauthorized forwarding, printing, copying, distribution, or use of such information is strictly prohibited and may be unlawful. If you are not the addressee, please promptly delete this message and notify the sender of the delivery error by e-mail or you may call Cerner's corporate offices in Kansas City, Missouri, U.S.A at (+1) (816)221-1024. Cerner Limited, Registered in England no 2519305, Registered Office 37 North Wharf Road, London W2 1AF.
Continuum 1.1-beta-1 auto refresh can cause repeated builds.
I like the auto refresh feature and tend to leave continuum up on the project group summary page while doing other work. Today I forced a build for a project on one of the project group pages and left my browser on that page. I checked my build emails later and found that project had built 8 times since I forced the initial build. This seems very similar to using the browser refresh so it may be good to make an extra mouse click after forcing a build. Bryan -- CONFIDENTIALITY NOTICE This message and any included attachments are from Cerner Corporation and are intended only for the addressee. The information contained in this message is confidential and may constitute inside or non-public information under international, federal, or state securities laws. Unauthorized forwarding, printing, copying, distribution, or use of such information is strictly prohibited and may be unlawful. If you are not the addressee, please promptly delete this message and notify the sender of the delivery error by e-mail or you may call Cerner's corporate offices in Kansas City, Missouri, U.S.A at (+1) (816)221-1024. Cerner Limited, Registered in England no 2519305, Registered Office 37 North Wharf Road, London W2 1AF.
RE: Continuum 1.1-beta-1 profile does not seem to work
(DefaultActionInvocation.java:188) at com.opensymphony.xwork.interceptor.I18nInterceptor.intercept(I18nInterceptor.java:151) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:31) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:31) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:31) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.interceptor.ExceptionMappingInterceptor.intercept(ExceptionMappingInterceptor.java:186) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.codehaus.plexus.redback.xwork.interceptor.AutoLoginInterceptor.intercept(AutoLoginInterceptor.java:156) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.codehaus.plexus.redback.xwork.interceptor.ForceAdminUserInterceptor.intercept(ForceAdminUserInterceptor.java:63) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at org.codehaus.plexus.redback.xwork.interceptor.EnvironmentCheckInterceptor.intercept(EnvironmentCheckInterceptor.java:122) at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:188) at com.opensymphony.xwork.DefaultActionProxy.execute(DefaultActionProxy.java:113) at com.opensymphony.webwork.dispatcher.DispatcherUtils.serviceAction(DispatcherUtils.java:225) at com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:202) at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(WebApplicationHandler.java:821) at com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(PageFilter.java:118) at com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter.java:52) at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(WebApplicationHandler.java:821) at com.opensymphony.webwork.dispatcher.ActionContextCleanUp.doFilter(ActionContextCleanUp.java:88) at org.mortbay.jetty.servlet.WebApplicationHandler$CachedChain.doFilter(WebApplicationHandler.java:821) at org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationHandler.java:471) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:568) at org.mortbay.http.HttpContext.handle(HttpContext.java:1530) at org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationContext.java:633) at org.mortbay.http.HttpContext.handle(HttpContext.java:1482) at org.mortbay.http.HttpServer.service(HttpServer.java:909) at org.mortbay.http.HttpConnection.service(HttpConnection.java:816) at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:982) at org.mortbay.http.HttpConnection.handle(HttpConnection.java:833) at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:244) at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:357) at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:534) That's all. "LAMY Olivier" <[EMAIL PROTECTED]> 07/08/2007 12:07 Veuillez répondre à [EMAIL PROTECTED] A <[EMAIL PROTECTED]> cc Objet RE: Continuum 1.1-beta-1 profile does not seem to work Do you have an error message or something in the log ? -- Olivier -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Envoyé : mardi 7 août 2007 11:59 À : [EMAIL PROTECTED] Cc : [EMAIL PROTECTED] Objet : Re: Continuum 1.1-beta-1 profile does not seem to work I have only one installation : Name : JDK 1.5.0_01 Type : jdk Env Var Name : JAVA_HOME Value/Path : C:\Program Files\Java\jdk1.5.0_01 I tried several profiles, the last one was a test with Firefox : testFirefox. Emmanuel Venisse <[EMAIL PROTECTED]> 07/08/2007 11:45 Veuillez répondre à [EMAIL PROTECTED] A [EMAIL PROTECTED] cc Objet Re: Continuum 1.1-beta-1 profile does not seem to work What are your installations? profiles with installations associated? [EMAIL PROTECTED] a écrit
Re: Continuum 1.1-beta-1 shell project does not run but runs from command line
Sure, org.apache.maven.plugins maven-compiler-plugin 2.0.1-SNAPSHOT 1.3 1.3 true org.apache.maven.plugins maven-jar-plugin true true ${ project.scm.connection} ${project.scm.tag} true Thanks. LJ On 8/6/07, LAMY Olivier <[EMAIL PROTECTED]> wrote: > > Could you show your maven-compiler-plugin configuration. > What are you target/source values ? > > > > -Message d'origine- > De : L. J. [mailto:[EMAIL PROTECTED] > Envoyé : mardi 7 août 2007 01:06 > À : continuum-users > Objet : Continuum 1.1-beta-1 shell project does not run but runs from > command line > > Using a shell script /usr/bin/sh build.sh (the script runs mvn -U - > Dmaven.test.skip clean install), it works fine from the command line, but > if I put in continuum beta-1 as a shell project, it fails. I tried adding > the profile but does not help. > > Any suggestion or idea? > > Compiling 65 source files to > /apps/build/continuum-1.1-beta-1/apps/continuum/webapp/WEB-INF/working-directory/2/checkoutAdmin/admintoolcontinuum/adminparentPOM/../AdminCache/target/classes > [INFO] > > [ERROR] BUILD FAILURE > [INFO] > > [INFO] Compilation failure > > Failure executing javac, but could not parse the error: > javac: target release 1.3 conflicts with default source release 1.5 > > > [INFO] > > [INFO] For more information, run Maven with the -e switch [INFO] > > [INFO] Total time: 27 seconds > [INFO] Finished at: Mon Aug 06 15:23:33 PDT 2007 [INFO] Final Memory: > 10M/28M [INFO] > > > Thanks. > > LJ > > > This e-mail, any attachments and the information contained therein ("this > message") are confidential and intended solely for the use of the > addressee(s). If you have received this message in error please send it back > to the sender and delete it. Unauthorized publication, use, dissemination or > disclosure of this message, either in whole or in part is strictly > prohibited. > ** > Ce message électronique et tous les fichiers joints ainsi que les > informations contenues dans ce message ( ci après "le message" ), sont > confidentiels et destinés exclusivement à l'usage de la personne à laquelle > ils sont adressés. Si vous avez reçu ce message par erreur, merci de le > renvoyer à son émetteur et de le détruire. Toutes diffusion, publication, > totale ou partielle ou divulgation sous quelque forme que se soit non > expressément autorisées de ce message, sont interdites. > ** > >
Re: Continuum 1.1-alpha-2
profiles/installations are in 1.1-beta-1 not in 1.1-alpha-2 Jesse McConnell a écrit : yes, you can use those with the profile setup, just register those installations of maven and the jdk and you'll be in good shape ping here if you have issues cheers! jesse On 8/2/07, Morgovsky, Alexander (US - Glen Mills) <[EMAIL PROTECTED]> wrote: I would like to install Continuum 1.1-alpha-2. Will I be able to use Maven 2.0.5 and Java 1.4.2_10? Thank you. This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. [v.E.1]
Re: Continuum 1.1-alpha-2
yes, you can use those with the profile setup, just register those installations of maven and the jdk and you'll be in good shape ping here if you have issues cheers! jesse On 8/2/07, Morgovsky, Alexander (US - Glen Mills) <[EMAIL PROTECTED]> wrote: > I would like to install Continuum 1.1-alpha-2. Will I be able to use > Maven 2.0.5 and Java 1.4.2_10? Thank you. > > > This message (including any attachments) contains confidential information > intended for a specific individual and purpose, and is protected by law. If > you are not the intended recipient, you should delete this message. > > > Any disclosure, copying, or distribution of this message, or the taking of > any action based on it, is strictly prohibited. [v.E.1] > -- jesse mcconnell [EMAIL PROTECTED]
Continuum 1.1-alpha-2
I would like to install Continuum 1.1-alpha-2. Will I be able to use Maven 2.0.5 and Java 1.4.2_10? Thank you. This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. [v.E.1]
Re: Attempting to use continuum-1.1-beta1
looks like the scheduleId wasn't set on the build definition... could you by chance replicate exactly what you did to reproduce this and give us a step by step flow wise? jesse On 8/1/07, Eric Miles <[EMAIL PROTECTED]> wrote: > > I am a current user of continuum 1.0.3 and am evaluating 1.1beta1. I am > having difficulties setting up project builds. I have loaded up the maven2 > project by pointing to a valid url for the parent pom and can see the > project group and all the sub-projects. When I select a module to view, the > build definition part of the UI says "Component can not be built" or > something of that nature. When I attempt to add a build definition, I click > save and am taken back to the module screen with the same "can not be built" > message. I look at the log files and see a null pointer exception. > > Any help on what's going on? I have setup an installation for the JDK, M2 > and created a profile. These were all referenced in the build defintion > before clicking save. > > > > -- jesse mcconnell [EMAIL PROTECTED]
RE: [Announce] Continuum 1.1-beta-1 is released
In the Build Profiles page I added an installation to my profile and saved it. When the screen refreshed the installation did not attach to the profile. No errors, nothing in the continuum.log. Any ideas why this would happen? Bryan -Original Message- From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 25, 2007 9:04 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; Maven Users List Subject: [Announce] Continuum 1.1-beta-1 is released Hi, The maven/Continuum team is pleased to announce the first beta of Continuum 1.1 Highlights are: * Continuum profiles to define JDK/maven/ANT to use in a build definition * many bug fixes and ui improvements. You can grab the latest release from: http://maven.apache.org/continuum/download.html Next up we are going to have another beta release in a month, or ideally before to have a final release in 1.5 month Anyway, below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-alpha-2 Bug * [CONTINUUM-530] - HTML encode the build output * [CONTINUUM-691] - Build Numbers are obscured by the queuing/building icon * [CONTINUUM-706] - XML-RPC Server does not support addition of BuildDefinitions * [CONTINUUM-709] - Runtime error during recording in datanase * [CONTINUUM-723] - strange trouble on solaris * [CONTINUUM-817] - The generated output in the Working Copy page displays the wrong content * [CONTINUUM-821] - The Project.getBuildResults() method returns an empty list * [CONTINUUM-963] - Derby Database initialization error on Webapp restarts on Jetty * [CONTINUUM-1094] - Continuum does not build with Sun JDK 6 * [CONTINUUM-1119] - Creating a Group with an existing id errors * [CONTINUUM-1191] - editProject: NoSuchMethodException: * [CONTINUUM-1194] - Project is stuck in the "Build in Progress" state if the associated exception has more than 8192 chars * [CONTINUUM-1226] - Second build definitions on a project is never triggered with CVS * [CONTINUUM-1228] - OgnlException while setting property 'projectGroupId' on redirect * [CONTINUUM-1235] - Continuum 1.1-SNAPSHOT fails to check out projects from CVS when kicking off the build * [CONTINUUM-1241] - Schedule fails to start due to derby database column being too small * [CONTINUUM-1244] - project group name is not validated when left blank in Edit Project Group page, resulting to an error * [CONTINUUM-1308] - error moving projects to a new group * [CONTINUUM-1314] - NPE in DefaultContinuum.java - isInBuildingQueue * [CONTINUUM-1316] - Hitting 'Add' button repetitively in adding an Ant, Shell and Schedule using empty string only accumulates validation prompts in IE browser * [CONTINUUM-1320] - DefaultBuildController.makeAndStoreBuildResult cannot save build result due to maximum size of COMMAND_LINE * [CONTINUUM-1337] - NPE during profile creation * [CONTINUUM-1338] - field name in class org.apache.maven.continuum.model.scm is too small * [CONTINUUM-1339] - Deleting a project group does not delete related build output directories * [CONTINUUM-1340] - After adding a ant project to the default project group (default project group is not displayed) * [CONTINUUM-1341] - Adding a Maven 2 POM from secure SVN on a non-standard port does not work Improvement * [CONTINUUM-774] - Better support for multiprojects * [CONTINUUM-1002] - build email cleanup * [CONTINUUM-1113] - Continuum doesn't work with MySQL * [CONTINUUM-1184] - Ability to pre-configure the Jetty port in conf/plexus.xml * [CONTINUUM-1350] - Documentation on Build profiles New Feature * [CONTINUUM-44] - multiple profiles * [CONTINUUM-614] - Enable auto-refresh for the build results page * [CONTINUUM-761] - Ability to delete results * [CONTINUUM-991] - Add meta refresh header to summary pages * [CONTINUUM-1178] - In Add New Maven 2 Project woudl like opportunity not to load modules * [CONTINUUM-1222] - usage of an alternative maven2-executable * [CONTINUUM-1291] - In a special configuration the report mail can contains false java version used for the build Task * [CONTINUUM-977] - Create web UI tests for "Add m1 & m2 projects" pages Test * [CONTINUUM-978] - add web ui tests for all pages related to schedules * [CONTINUUM-1223] - Ability to choose JVM (export JAVA_HOME) for different projects Wish * [CONTINUUM-1224] - Ability to set MAVEN_OPTS for Maven2 build definitions * [CONTINUUM-1258] - Configure the possibility of resolving or not the search of build executables (maven, ant ...) Emmanuel - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- CON
RE: [Announce] Continuum 1.1-beta-1 is released
Well, I think the stop button would be great. I have a large project that takes 30 minutes total to build with various test suites implemented. In some cases we want to manually stop the build because someone's commit did not quite make it in before the build started building. > -Original Message- > From: Stephane Nicoll [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 25, 2007 10:35 AM > To: [EMAIL PROTECTED] > Subject: Re: [Announce] Continuum 1.1-beta-1 is released > > You simply need to setup your schedule properly. It has an option to > specify the max. build time (default to 1h). It has always worked for > me. > > HTH, > Stéphane > > On 7/25/07, Morgovsky, Alexander (US - Glen Mills) > <[EMAIL PROTECTED]> wrote: > > Okay, I am referring to the 1.1-beta-1 release. For the non- > terminating build scenario, does Continuum now have a time-out where it > will terminate the build after n minutes? If not, how will Continuum > know when to terminate a build if it is indeed non-terminating, even > for reason outside of Continuum like the deployment server being down > and/or custom scripts not terminating properly. Thank you. > > > > -Original Message- > > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, July 25, 2007 10:16 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [Announce] Continuum 1.1-beta-1 is released > > > > > > > > Morgovsky, Alexander (US - Glen Mills) a écrit : > > > Are there plans to implement a "stop build" button? > > > > I don't know yet because it can't be done for windows. > > > > > Having to manually > > > go to the database, use process viewers and other tools is the > biggest > > > problem which I have experienced when using Continuum. Thank you. > > > > With a 1.1-alpha or beta-1? > > I don't think you will have to do that with 1.1-beta-1 > > > > Emmanuel > > > > > > -Original Message- > > > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, July 25, 2007 10:04 AM > > > To: [EMAIL PROTECTED] > > > Cc: [EMAIL PROTECTED]; Maven Users List > > > Subject: [Announce] Continuum 1.1-beta-1 is released > > > > > > Hi, > > > > > > The maven/Continuum team is pleased to announce the first beta of > > > Continuum 1.1 > > > > > > Highlights are: > > > > > > * Continuum profiles to define JDK/maven/ANT to use in a build > > > definition > > > * many bug fixes and ui improvements. > > > > > > > > > You can grab the latest release from: > > > > > > http://maven.apache.org/continuum/download.html > > > > > > > > > Next up we are going to have another beta release in a month, or > > > ideally before to have a final release in 1.5 month > > > > > > Anyway, below is the jira release notes for this release. > > > > > > Release Notes - Continuum - Version 1.1-alpha-2 > > > > > > Bug > > > > > > * [CONTINUUM-530] - HTML encode the build output > > > * [CONTINUUM-691] - Build Numbers are obscured by the > > > queuing/building icon > > > * [CONTINUUM-706] - XML-RPC Server does not support addition > of > > > BuildDefinitions > > > * [CONTINUUM-709] - Runtime error during recording in datanase > > > * [CONTINUUM-723] - strange trouble on solaris > > > * [CONTINUUM-817] - The generated output in the Working Copy > page > > > displays the wrong content > > > * [CONTINUUM-821] - The Project.getBuildResults() method > returns an > > > empty list > > > * [CONTINUUM-963] - Derby Database initialization error on > Webapp > > > restarts on Jetty > > > * [CONTINUUM-1094] - Continuum does not build with Sun JDK 6 > > > * [CONTINUUM-1119] - Creating a Group with an existing id > errors > > > * [CONTINUUM-1191] - editProject: NoSuchMethodException: > > > * [CONTINUUM-1194] - Project is stuck in the "Build in > Progress" > > > state if the associated exception has more than 8192 chars > > > * [CONTINUUM-1226] - Second build definitions on a project is > never > > > triggered with CVS > > > * [CONTINUUM-1228] - OgnlException while setting property > > > 'projectGroupId' on redirect > > > * [CONTINUUM-1235] - Continuum 1.1-SNAPSHOT fails to check out > > > projects from CVS
Re: [Announce] Continuum 1.1-beta-1 is released
Also, stop build is implemented (when running on Linux), we just need to re-enable in the UI. I've requested this get scheduled for the 1.1-beta-2 release. - Brett On 26/07/07, Morgovsky, Alexander (US - Glen Mills) <[EMAIL PROTECTED]> wrote: Thank you for your help, I will try this option. -Original Message- From: Stephane Nicoll [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 25, 2007 10:35 AM To: [EMAIL PROTECTED] Subject: Re: [Announce] Continuum 1.1-beta-1 is released You simply need to setup your schedule properly. It has an option to specify the max. build time (default to 1h). It has always worked for me. HTH, Stéphane On 7/25/07, Morgovsky, Alexander (US - Glen Mills) <[EMAIL PROTECTED]> wrote: > Okay, I am referring to the 1.1-beta-1 release. For the non-terminating build scenario, does Continuum now have a time-out where it will terminate the build after n minutes? If not, how will Continuum know when to terminate a build if it is indeed non-terminating, even for reason outside of Continuum like the deployment server being down and/or custom scripts not terminating properly. Thank you. > > -Original Message- > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 25, 2007 10:16 AM > To: [EMAIL PROTECTED] > Subject: Re: [Announce] Continuum 1.1-beta-1 is released > > > > Morgovsky, Alexander (US - Glen Mills) a écrit : > > Are there plans to implement a "stop build" button? > > I don't know yet because it can't be done for windows. > > > Having to manually > > go to the database, use process viewers and other tools is the biggest > > problem which I have experienced when using Continuum. Thank you. > > With a 1.1-alpha or beta-1? > I don't think you will have to do that with 1.1-beta-1 > > Emmanuel > > > > -Original Message- > > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, July 25, 2007 10:04 AM > > To: [EMAIL PROTECTED] > > Cc: [EMAIL PROTECTED]; Maven Users List > > Subject: [Announce] Continuum 1.1-beta-1 is released > > > > Hi, > > > > The maven/Continuum team is pleased to announce the first beta of > > Continuum 1.1 > > > > Highlights are: > > > > * Continuum profiles to define JDK/maven/ANT to use in a build > > definition > > * many bug fixes and ui improvements. > > > > > > You can grab the latest release from: > > > > http://maven.apache.org/continuum/download.html > > > > > > Next up we are going to have another beta release in a month, or > > ideally before to have a final release in 1.5 month > > > > Anyway, below is the jira release notes for this release. > > > > Release Notes - Continuum - Version 1.1-alpha-2 > > > > Bug > > > > * [CONTINUUM-530] - HTML encode the build output > > * [CONTINUUM-691] - Build Numbers are obscured by the > > queuing/building icon > > * [CONTINUUM-706] - XML-RPC Server does not support addition of > > BuildDefinitions > > * [CONTINUUM-709] - Runtime error during recording in datanase > > * [CONTINUUM-723] - strange trouble on solaris > > * [CONTINUUM-817] - The generated output in the Working Copy page > > displays the wrong content > > * [CONTINUUM-821] - The Project.getBuildResults() method returns an > > empty list > > * [CONTINUUM-963] - Derby Database initialization error on Webapp > > restarts on Jetty > > * [CONTINUUM-1094] - Continuum does not build with Sun JDK 6 > > * [CONTINUUM-1119] - Creating a Group with an existing id errors > > * [CONTINUUM-1191] - editProject: NoSuchMethodException: > > * [CONTINUUM-1194] - Project is stuck in the "Build in Progress" > > state if the associated exception has more than 8192 chars > > * [CONTINUUM-1226] - Second build definitions on a project is never > > triggered with CVS > > * [CONTINUUM-1228] - OgnlException while setting property > > 'projectGroupId' on redirect > > * [CONTINUUM-1235] - Continuum 1.1-SNAPSHOT fails to check out > > projects from CVS when kicking off the build > > * [CONTINUUM-1241] - Schedule fails to start due to derby database > > column being too small > > * [CONTINUUM-1244] - project group name is not validated when left > > blank in Edit Project Group page, resulting to an error > > * [CONTINUUM-1308] - error moving projects to a new group > > * [CONTINUUM-1314] - NPE in DefaultContinuum.java - > > isInBuildingQueue > > * [CONTINUUM-1316] - Hitting 'Add
RE: [Announce] Continuum 1.1-beta-1 is released
Thank you for your help, I will try this option. -Original Message- From: Stephane Nicoll [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 25, 2007 10:35 AM To: [EMAIL PROTECTED] Subject: Re: [Announce] Continuum 1.1-beta-1 is released You simply need to setup your schedule properly. It has an option to specify the max. build time (default to 1h). It has always worked for me. HTH, Stéphane On 7/25/07, Morgovsky, Alexander (US - Glen Mills) <[EMAIL PROTECTED]> wrote: > Okay, I am referring to the 1.1-beta-1 release. For the non-terminating > build scenario, does Continuum now have a time-out where it will terminate > the build after n minutes? If not, how will Continuum know when to terminate > a build if it is indeed non-terminating, even for reason outside of Continuum > like the deployment server being down and/or custom scripts not terminating > properly. Thank you. > > -Original Message- > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 25, 2007 10:16 AM > To: [EMAIL PROTECTED] > Subject: Re: [Announce] Continuum 1.1-beta-1 is released > > > > Morgovsky, Alexander (US - Glen Mills) a écrit : > > Are there plans to implement a "stop build" button? > > I don't know yet because it can't be done for windows. > > > Having to manually > > go to the database, use process viewers and other tools is the biggest > > problem which I have experienced when using Continuum. Thank you. > > With a 1.1-alpha or beta-1? > I don't think you will have to do that with 1.1-beta-1 > > Emmanuel > > > > -Original Message- > > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, July 25, 2007 10:04 AM > > To: [EMAIL PROTECTED] > > Cc: [EMAIL PROTECTED]; Maven Users List > > Subject: [Announce] Continuum 1.1-beta-1 is released > > > > Hi, > > > > The maven/Continuum team is pleased to announce the first beta of > > Continuum 1.1 > > > > Highlights are: > > > > * Continuum profiles to define JDK/maven/ANT to use in a build > > definition > > * many bug fixes and ui improvements. > > > > > > You can grab the latest release from: > > > > http://maven.apache.org/continuum/download.html > > > > > > Next up we are going to have another beta release in a month, or > > ideally before to have a final release in 1.5 month > > > > Anyway, below is the jira release notes for this release. > > > > Release Notes - Continuum - Version 1.1-alpha-2 > > > > Bug > > > > * [CONTINUUM-530] - HTML encode the build output > > * [CONTINUUM-691] - Build Numbers are obscured by the > > queuing/building icon > > * [CONTINUUM-706] - XML-RPC Server does not support addition of > > BuildDefinitions > > * [CONTINUUM-709] - Runtime error during recording in datanase > > * [CONTINUUM-723] - strange trouble on solaris > > * [CONTINUUM-817] - The generated output in the Working Copy page > > displays the wrong content > > * [CONTINUUM-821] - The Project.getBuildResults() method returns an > > empty list > > * [CONTINUUM-963] - Derby Database initialization error on Webapp > > restarts on Jetty > > * [CONTINUUM-1094] - Continuum does not build with Sun JDK 6 > > * [CONTINUUM-1119] - Creating a Group with an existing id errors > > * [CONTINUUM-1191] - editProject: NoSuchMethodException: > > * [CONTINUUM-1194] - Project is stuck in the "Build in Progress" > > state if the associated exception has more than 8192 chars > > * [CONTINUUM-1226] - Second build definitions on a project is never > > triggered with CVS > > * [CONTINUUM-1228] - OgnlException while setting property > > 'projectGroupId' on redirect > > * [CONTINUUM-1235] - Continuum 1.1-SNAPSHOT fails to check out > > projects from CVS when kicking off the build > > * [CONTINUUM-1241] - Schedule fails to start due to derby database > > column being too small > > * [CONTINUUM-1244] - project group name is not validated when left > > blank in Edit Project Group page, resulting to an error > > * [CONTINUUM-1308] - error moving projects to a new group > > * [CONTINUUM-1314] - NPE in DefaultContinuum.java - > > isInBuildingQueue > > * [CONTINUUM-1316] - Hitting 'Add' button repetitively in adding an > > Ant, Shell and Schedule using empty string only accumulates validation > > prompts in IE browser > > * [CONTINUUM-1320] - DefaultBuildController.makeAndStoreBuildResult &g
Re: [Announce] Continuum 1.1-beta-1 is released
You simply need to setup your schedule properly. It has an option to specify the max. build time (default to 1h). It has always worked for me. HTH, Stéphane On 7/25/07, Morgovsky, Alexander (US - Glen Mills) <[EMAIL PROTECTED]> wrote: Okay, I am referring to the 1.1-beta-1 release. For the non-terminating build scenario, does Continuum now have a time-out where it will terminate the build after n minutes? If not, how will Continuum know when to terminate a build if it is indeed non-terminating, even for reason outside of Continuum like the deployment server being down and/or custom scripts not terminating properly. Thank you. -Original Message- From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 25, 2007 10:16 AM To: [EMAIL PROTECTED] Subject: Re: [Announce] Continuum 1.1-beta-1 is released Morgovsky, Alexander (US - Glen Mills) a écrit : > Are there plans to implement a "stop build" button? I don't know yet because it can't be done for windows. > Having to manually > go to the database, use process viewers and other tools is the biggest > problem which I have experienced when using Continuum. Thank you. With a 1.1-alpha or beta-1? I don't think you will have to do that with 1.1-beta-1 Emmanuel > > -Original Message- > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 25, 2007 10:04 AM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; Maven Users List > Subject: [Announce] Continuum 1.1-beta-1 is released > > Hi, > > The maven/Continuum team is pleased to announce the first beta of > Continuum 1.1 > > Highlights are: > > * Continuum profiles to define JDK/maven/ANT to use in a build > definition > * many bug fixes and ui improvements. > > > You can grab the latest release from: > > http://maven.apache.org/continuum/download.html > > > Next up we are going to have another beta release in a month, or > ideally before to have a final release in 1.5 month > > Anyway, below is the jira release notes for this release. > > Release Notes - Continuum - Version 1.1-alpha-2 > > Bug > > * [CONTINUUM-530] - HTML encode the build output > * [CONTINUUM-691] - Build Numbers are obscured by the > queuing/building icon > * [CONTINUUM-706] - XML-RPC Server does not support addition of > BuildDefinitions > * [CONTINUUM-709] - Runtime error during recording in datanase > * [CONTINUUM-723] - strange trouble on solaris > * [CONTINUUM-817] - The generated output in the Working Copy page > displays the wrong content > * [CONTINUUM-821] - The Project.getBuildResults() method returns an > empty list > * [CONTINUUM-963] - Derby Database initialization error on Webapp > restarts on Jetty > * [CONTINUUM-1094] - Continuum does not build with Sun JDK 6 > * [CONTINUUM-1119] - Creating a Group with an existing id errors > * [CONTINUUM-1191] - editProject: NoSuchMethodException: > * [CONTINUUM-1194] - Project is stuck in the "Build in Progress" > state if the associated exception has more than 8192 chars > * [CONTINUUM-1226] - Second build definitions on a project is never > triggered with CVS > * [CONTINUUM-1228] - OgnlException while setting property > 'projectGroupId' on redirect > * [CONTINUUM-1235] - Continuum 1.1-SNAPSHOT fails to check out > projects from CVS when kicking off the build > * [CONTINUUM-1241] - Schedule fails to start due to derby database > column being too small > * [CONTINUUM-1244] - project group name is not validated when left > blank in Edit Project Group page, resulting to an error > * [CONTINUUM-1308] - error moving projects to a new group > * [CONTINUUM-1314] - NPE in DefaultContinuum.java - > isInBuildingQueue > * [CONTINUUM-1316] - Hitting 'Add' button repetitively in adding an > Ant, Shell and Schedule using empty string only accumulates validation > prompts in IE browser > * [CONTINUUM-1320] - DefaultBuildController.makeAndStoreBuildResult > cannot save build result due to maximum size of COMMAND_LINE > * [CONTINUUM-1337] - NPE during profile creation > * [CONTINUUM-1338] - field name in class > org.apache.maven.continuum.model.scm is too small > * [CONTINUUM-1339] - Deleting a project group does not delete > related build output directories > * [CONTINUUM-1340] - After adding a ant project to the default > project group (default project group is not displayed) > * [CONTINUUM-1341] - Adding a Maven 2 POM from secure SVN on a > non-standard port does not work > > Improvement > > * [CONTINUUM-774] - Better support for multiprojects > * [CONTINUUM-1002] - build email cleanu
RE: [Announce] Continuum 1.1-beta-1 is released
Okay, I am referring to the 1.1-beta-1 release. For the non-terminating build scenario, does Continuum now have a time-out where it will terminate the build after n minutes? If not, how will Continuum know when to terminate a build if it is indeed non-terminating, even for reason outside of Continuum like the deployment server being down and/or custom scripts not terminating properly. Thank you. -Original Message- From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 25, 2007 10:16 AM To: [EMAIL PROTECTED] Subject: Re: [Announce] Continuum 1.1-beta-1 is released Morgovsky, Alexander (US - Glen Mills) a écrit : > Are there plans to implement a "stop build" button? I don't know yet because it can't be done for windows. > Having to manually > go to the database, use process viewers and other tools is the biggest > problem which I have experienced when using Continuum. Thank you. With a 1.1-alpha or beta-1? I don't think you will have to do that with 1.1-beta-1 Emmanuel > > -Original Message- > From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 25, 2007 10:04 AM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; Maven Users List > Subject: [Announce] Continuum 1.1-beta-1 is released > > Hi, > > The maven/Continuum team is pleased to announce the first beta of > Continuum 1.1 > > Highlights are: > > * Continuum profiles to define JDK/maven/ANT to use in a build > definition > * many bug fixes and ui improvements. > > > You can grab the latest release from: > > http://maven.apache.org/continuum/download.html > > > Next up we are going to have another beta release in a month, or > ideally before to have a final release in 1.5 month > > Anyway, below is the jira release notes for this release. > > Release Notes - Continuum - Version 1.1-alpha-2 > > Bug > > * [CONTINUUM-530] - HTML encode the build output > * [CONTINUUM-691] - Build Numbers are obscured by the > queuing/building icon > * [CONTINUUM-706] - XML-RPC Server does not support addition of > BuildDefinitions > * [CONTINUUM-709] - Runtime error during recording in datanase > * [CONTINUUM-723] - strange trouble on solaris > * [CONTINUUM-817] - The generated output in the Working Copy page > displays the wrong content > * [CONTINUUM-821] - The Project.getBuildResults() method returns an > empty list > * [CONTINUUM-963] - Derby Database initialization error on Webapp > restarts on Jetty > * [CONTINUUM-1094] - Continuum does not build with Sun JDK 6 > * [CONTINUUM-1119] - Creating a Group with an existing id errors > * [CONTINUUM-1191] - editProject: NoSuchMethodException: > * [CONTINUUM-1194] - Project is stuck in the "Build in Progress" > state if the associated exception has more than 8192 chars > * [CONTINUUM-1226] - Second build definitions on a project is never > triggered with CVS > * [CONTINUUM-1228] - OgnlException while setting property > 'projectGroupId' on redirect > * [CONTINUUM-1235] - Continuum 1.1-SNAPSHOT fails to check out > projects from CVS when kicking off the build > * [CONTINUUM-1241] - Schedule fails to start due to derby database > column being too small > * [CONTINUUM-1244] - project group name is not validated when left > blank in Edit Project Group page, resulting to an error > * [CONTINUUM-1308] - error moving projects to a new group > * [CONTINUUM-1314] - NPE in DefaultContinuum.java - > isInBuildingQueue > * [CONTINUUM-1316] - Hitting 'Add' button repetitively in adding an > Ant, Shell and Schedule using empty string only accumulates validation > prompts in IE browser > * [CONTINUUM-1320] - DefaultBuildController.makeAndStoreBuildResult > cannot save build result due to maximum size of COMMAND_LINE > * [CONTINUUM-1337] - NPE during profile creation > * [CONTINUUM-1338] - field name in class > org.apache.maven.continuum.model.scm is too small > * [CONTINUUM-1339] - Deleting a project group does not delete > related build output directories > * [CONTINUUM-1340] - After adding a ant project to the default > project group (default project group is not displayed) > * [CONTINUUM-1341] - Adding a Maven 2 POM from secure SVN on a > non-standard port does not work > > Improvement > > * [CONTINUUM-774] - Better support for multiprojects > * [CONTINUUM-1002] - build email cleanup > * [CONTINUUM-1113] - Continuum doesn't work with MySQL > * [CONTINUUM-1184] - Ability to pre-configure the Jetty port in > conf/plexus.xml > * [CONTINUUM-1350] - Documentation on Bui
Re: [Announce] Continuum 1.1-beta-1 is released
Morgovsky, Alexander (US - Glen Mills) a écrit : Are there plans to implement a "stop build" button? I don't know yet because it can't be done for windows. Having to manually go to the database, use process viewers and other tools is the biggest problem which I have experienced when using Continuum. Thank you. With a 1.1-alpha or beta-1? I don't think you will have to do that with 1.1-beta-1 Emmanuel -Original Message- From: Emmanuel Venisse [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 25, 2007 10:04 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; Maven Users List Subject: [Announce] Continuum 1.1-beta-1 is released Hi, The maven/Continuum team is pleased to announce the first beta of Continuum 1.1 Highlights are: * Continuum profiles to define JDK/maven/ANT to use in a build definition * many bug fixes and ui improvements. You can grab the latest release from: http://maven.apache.org/continuum/download.html Next up we are going to have another beta release in a month, or ideally before to have a final release in 1.5 month Anyway, below is the jira release notes for this release. Release Notes - Continuum - Version 1.1-alpha-2 Bug * [CONTINUUM-530] - HTML encode the build output * [CONTINUUM-691] - Build Numbers are obscured by the queuing/building icon * [CONTINUUM-706] - XML-RPC Server does not support addition of BuildDefinitions * [CONTINUUM-709] - Runtime error during recording in datanase * [CONTINUUM-723] - strange trouble on solaris * [CONTINUUM-817] - The generated output in the Working Copy page displays the wrong content * [CONTINUUM-821] - The Project.getBuildResults() method returns an empty list * [CONTINUUM-963] - Derby Database initialization error on Webapp restarts on Jetty * [CONTINUUM-1094] - Continuum does not build with Sun JDK 6 * [CONTINUUM-1119] - Creating a Group with an existing id errors * [CONTINUUM-1191] - editProject: NoSuchMethodException: * [CONTINUUM-1194] - Project is stuck in the "Build in Progress" state if the associated exception has more than 8192 chars * [CONTINUUM-1226] - Second build definitions on a project is never triggered with CVS * [CONTINUUM-1228] - OgnlException while setting property 'projectGroupId' on redirect * [CONTINUUM-1235] - Continuum 1.1-SNAPSHOT fails to check out projects from CVS when kicking off the build * [CONTINUUM-1241] - Schedule fails to start due to derby database column being too small * [CONTINUUM-1244] - project group name is not validated when left blank in Edit Project Group page, resulting to an error * [CONTINUUM-1308] - error moving projects to a new group * [CONTINUUM-1314] - NPE in DefaultContinuum.java - isInBuildingQueue * [CONTINUUM-1316] - Hitting 'Add' button repetitively in adding an Ant, Shell and Schedule using empty string only accumulates validation prompts in IE browser * [CONTINUUM-1320] - DefaultBuildController.makeAndStoreBuildResult cannot save build result due to maximum size of COMMAND_LINE * [CONTINUUM-1337] - NPE during profile creation * [CONTINUUM-1338] - field name in class org.apache.maven.continuum.model.scm is too small * [CONTINUUM-1339] - Deleting a project group does not delete related build output directories * [CONTINUUM-1340] - After adding a ant project to the default project group (default project group is not displayed) * [CONTINUUM-1341] - Adding a Maven 2 POM from secure SVN on a non-standard port does not work Improvement * [CONTINUUM-774] - Better support for multiprojects * [CONTINUUM-1002] - build email cleanup * [CONTINUUM-1113] - Continuum doesn't work with MySQL * [CONTINUUM-1184] - Ability to pre-configure the Jetty port in conf/plexus.xml * [CONTINUUM-1350] - Documentation on Build profiles New Feature * [CONTINUUM-44] - multiple profiles * [CONTINUUM-614] - Enable auto-refresh for the build results page * [CONTINUUM-761] - Ability to delete results * [CONTINUUM-991] - Add meta refresh header to summary pages * [CONTINUUM-1178] - In Add New Maven 2 Project woudl like opportunity not to load modules * [CONTINUUM-1222] - usage of an alternative maven2-executable * [CONTINUUM-1291] - In a special configuration the report mail can contains false java version used for the build Task * [CONTINUUM-977] - Create web UI tests for "Add m1 & m2 projects" pages Test * [CONTINUUM-978] - add web ui tests for all pages related to schedules * [CONTINUUM-1223] - Ability to choose JVM (export JAVA_HOME) for different projects Wish * [CONTINUUM-1224] - Ability to set MAVEN_OPTS for Maven2 build definitions * [CONTINUUM-1258] - Configure the possibility of resolving or not the search of build executables (maven, ant ...) Emmanuel This message (including