Re: [WISPA] Lightning protection used on installs
The newest version of Citel's outdoor protector is pretty awesome also. Its a pretty close competition on whether the Canopy or Citel is better. The Citel can be had at about the same cost, depedning on how buying. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Scott Carullo sc...@brevardwireless.com To: wireless@wispa.org Sent: Saturday, April 11, 2009 8:17 PM Subject: [WISPA] Lightning protection used on installs Its about that time :) What have you guys found most cost effective (and it needs to work) for lightning protection where the cable enters an exterior wall? How much and where do you get them? So far the motorola units seem to be the best I've seen for what you get and how they work... Also, if you don't mind describing the rest of the pieces you like to use I'm all ears... (which type of ground wire / guage / how to attach to wall / color etc) Scott Carullo Brevard Wireless 321-205-1100 x102 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Lightning protection used on installs
Its about that time :) What have you guys found most cost effective (and it needs to work) for lightning protection where the cable enters an exterior wall? How much and where do you get them? So far the motorola units seem to be the best I've seen for what you get and how they work... Also, if you don't mind describing the rest of the pieces you like to use I'm all ears... (which type of ground wire / guage / how to attach to wall / color etc) Scott Carullo Brevard Wireless 321-205-1100 x102 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Lightning protection
I'd like to inquiry this mailing list on what other WISPs use as far as lightning protection. We've had a bad spring every other year with something going bad. This recent past spring two towers were hit causing massive outages and a really bad day. We have a stock of these things which is why this was brought up: http://shop.wirelessguys.com/s.nl;jsessionid=0a0108421f43ab6dee3813784f588a6a9ab61e2443c4.e3eTaxePaNqNe34Pa38Ta38NaNj0?it=Aid=2681 Usually for our Trangos and MTs we use the PacWireless esp-100-poe http://www.pacwireless.com/products/ESP-100-POE_datasheet.pdf The Transtector units have been on the shelf for a while, they came from an old storage unit from another company. With the price tag I wondered if they didn't do anything extra. I opened them up and it looks like nothing more then resistors and a patch pannel on a piece of PCB. The units that we lost last spring were RB532s with the esp-100-poe and two ODUs for Redline AN50s (not the IDU, though!) Hopefully someone can suggest a better way to defend us from those acts of god =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Lightning protection
We are mostly Canopy and Redline AN80 around here. We have had great luck with the transtector ALPU-POE for Canopy and have had great luck with the units that are recommended by redline for AN80. We're actually trying on a couple of sites a POE with Surge from Hyperlinktech. On Mon, Dec 29, 2008 at 5:51 PM, Josh Luthman j...@imaginenetworksllc.comwrote: I'd like to inquiry this mailing list on what other WISPs use as far as lightning protection. We've had a bad spring every other year with something going bad. This recent past spring two towers were hit causing massive outages and a really bad day. We have a stock of these things which is why this was brought up: http://shop.wirelessguys.com/s.nl;jsessionid=0a0108421f43ab6dee3813784f588a6a9ab61e2443c4.e3eTaxePaNqNe34Pa38Ta38NaNj0?it=Aid=2681 Usually for our Trangos and MTs we use the PacWireless esp-100-poe http://www.pacwireless.com/products/ESP-100-POE_datasheet.pdf The Transtector units have been on the shelf for a while, they came from an old storage unit from another company. With the price tag I wondered if they didn't do anything extra. I opened them up and it looks like nothing more then resistors and a patch pannel on a piece of PCB. The units that we lost last spring were RB532s with the esp-100-poe and two ODUs for Redline AN50s (not the IDU, though!) Hopefully someone can suggest a better way to defend us from those acts of god =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Lightning protection
A combination of surge protection and proper grounding is the key. We utilize a multi-point ground tester and find a large portion of our sites have poor grounds (less then 5 Ohms to earth) or some crack head stole the buss bars and copper. (Very likely in FLA). Testing has become part of our semi-annual maintenance. We also utilize static dissipaters to reduce the conditions for lightning to form around the site as well as surge protectors. As far as Transtectors, The large one for the canopy is very well designed and works well. We have replaced all of the ALPU-ORT (PTP Transtector versions) with the new Motorola units. They stand up better, are made for hanging on towers and don't fill with water after baking in the sun for a few years. Dustin -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of John McDowell Sent: Monday, December 29, 2008 7:16 PM To: WISPA General List Subject: Re: [WISPA] Lightning protection We are mostly Canopy and Redline AN80 around here. We have had great luck with the transtector ALPU-POE for Canopy and have had great luck with the units that are recommended by redline for AN80. We're actually trying on a couple of sites a POE with Surge from Hyperlinktech. On Mon, Dec 29, 2008 at 5:51 PM, Josh Luthman j...@imaginenetworksllc.comwrote: I'd like to inquiry this mailing list on what other WISPs use as far as lightning protection. We've had a bad spring every other year with something going bad. This recent past spring two towers were hit causing massive outages and a really bad day. We have a stock of these things which is why this was brought up: http://shop.wirelessguys.com/s.nl;jsessionid=0a0108421f43ab6dee3813784f588a6 a9ab61e2443c4.e3eTaxePaNqNe34Pa38Ta38NaNj0?it=Aid=2681 Usually for our Trangos and MTs we use the PacWireless esp-100-poe http://www.pacwireless.com/products/ESP-100-POE_datasheet.pdf The Transtector units have been on the shelf for a while, they came from an old storage unit from another company. With the price tag I wondered if they didn't do anything extra. I opened them up and it looks like nothing more then resistors and a patch pannel on a piece of PCB. The units that we lost last spring were RB532s with the esp-100-poe and two ODUs for Redline AN50s (not the IDU, though!) Hopefully someone can suggest a better way to defend us from those acts of god =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Lightning Protection
Jim, I too have the pleasure of enjoying the wonderful Kansas Storms... Our main tower had been hit three times (in a row, in one season) while i have been using it for wireless, and I got fed up with changing out the equipment each time. I have found that on most of the towers, if it has a good ground, and you leave some of the tower, or a pole up higher than your equipment, there are no Lightning problems. On our main tower however, it was not grounded well. So in doing a little research I came across this kit from glen martin (I am sure there are others out there too) http://www.glenmartin.com/catalog/lightning.htm It came with everything but the wire to run down the side of the tower, which i was able to purchase from our local electric dept. I installed it, as well as drove a rod at each leg (it was a self supporting tower with three legs) and grounded each as well. since this was installed, I have not had a single problem through two seasons of storms now. I also installed a surge protection system , in my equipment room, that is connected to a ground bar that is tied to the tower as well. (an electrician told me to make sure your have your grounds tied together. Something about ground differentials, or equipment from two different grounding sources. I cannot remember the exact reason) In the past it seemed I was losing the equipment (or more specifically the mini-pci cards) from at least one tower everytime it decided to cloud over, due to another problem as well. Come to find out most of that problem was related to static build up on the antennas. (in fact every Omni directional antenna i had nearly, popped a card each time it clouded over) I found a solution to that as well, which you can read about here ( http://forum.mikrotik.com/viewtopic.php?f=7t=9734hilit= Topic:Wireless card recieve blows issue, in Wireless Networking Category ) on the Mikrotik Forums. Again Since implementing it, Havent lost a single card. Hope this all helps. Jaron Parsons Sumner Communications Jim Stout wrote: Spring arrived in Kansas City and so did the thunder storms. I took a lightning stike on my tower and lost both APs, the POEs, two switches and a Mikrotik router. The Antennas survived but it looks like I lost a little gain. My question is how do I protect against this happening again? Are lightning rods effective? Any thoughts will be appreciated. I don't want to have to replace everything again. TIA, Jim Jim Stout LTO Communications, LLC 15701 Henry Andrews Dr Pleasant Hill, MO 64080 (816) 305-1076 - Mobile (816) 497-0033 - Pager -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Lightning Protection
http://en.wikipedia.org/wiki/Ground_loop_%28electricity%29 - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Jaron Parsons [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Wednesday, May 30, 2007 7:38 AM Subject: Re: [WISPA] Lightning Protection Jim, I too have the pleasure of enjoying the wonderful Kansas Storms... Our main tower had been hit three times (in a row, in one season) while i have been using it for wireless, and I got fed up with changing out the equipment each time. I have found that on most of the towers, if it has a good ground, and you leave some of the tower, or a pole up higher than your equipment, there are no Lightning problems. On our main tower however, it was not grounded well. So in doing a little research I came across this kit from glen martin (I am sure there are others out there too) http://www.glenmartin.com/catalog/lightning.htm It came with everything but the wire to run down the side of the tower, which i was able to purchase from our local electric dept. I installed it, as well as drove a rod at each leg (it was a self supporting tower with three legs) and grounded each as well. since this was installed, I have not had a single problem through two seasons of storms now. I also installed a surge protection system , in my equipment room, that is connected to a ground bar that is tied to the tower as well. (an electrician told me to make sure your have your grounds tied together. Something about ground differentials, or equipment from two different grounding sources. I cannot remember the exact reason) In the past it seemed I was losing the equipment (or more specifically the mini-pci cards) from at least one tower everytime it decided to cloud over, due to another problem as well. Come to find out most of that problem was related to static build up on the antennas. (in fact every Omni directional antenna i had nearly, popped a card each time it clouded over) I found a solution to that as well, which you can read about here ( http://forum.mikrotik.com/viewtopic.php?f=7t=9734hilit= Topic:Wireless card recieve blows issue, in Wireless Networking Category ) on the Mikrotik Forums. Again Since implementing it, Havent lost a single card. Hope this all helps. Jaron Parsons Sumner Communications Jim Stout wrote: Spring arrived in Kansas City and so did the thunder storms. I took a lightning stike on my tower and lost both APs, the POEs, two switches and a Mikrotik router. The Antennas survived but it looks like I lost a little gain. My question is how do I protect against this happening again? Are lightning rods effective? Any thoughts will be appreciated. I don't want to have to replace everything again. TIA, Jim Jim Stout LTO Communications, LLC 15701 Henry Andrews Dr Pleasant Hill, MO 64080 (816) 305-1076 - Mobile (816) 497-0033 - Pager -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Lightning Protection
Spring arrived in Kansas City and so did the thunder storms. I took a lightning stike on my tower and lost both APs, the POEs, two switches and a Mikrotik router. The Antennas survived but it looks like I lost a little gain. My question is how do I protect against this happening again? Are lightning rods effective? Any thoughts will be appreciated. I don't want to have to replace everything again. TIA, Jim Jim Stout LTO Communications, LLC 15701 Henry Andrews Dr Pleasant Hill, MO 64080 (816) 305-1076 - Mobile (816) 497-0033 - Pager -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Lightning Protection
So does this mean that cabling and equipment should be grounded to same source? I understand grounding the cable prior to entry. Does grounding my cable to one ground and then using the shelter power, which is on a different ground, set up a potential on the equipment? Maybe disconnect the ground on the power side and bond everything to a single point? Chris Your sapose to do both ground outside before you get to the shelter portand insideto tie into the ground ring inside the shelter. -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Lightning Protection
Your sapose to do both ground outside before you get to the shelter portand insideto tie into the ground ring inside the shelter. Your grounding should be every 75 to 100 feet of your cable run down the tower.So if you have 300 feet of cable run your going to have 3 grounds in your system TOP, MIDDLE, BOTTOM. I usually see at least two TOP and BOTTOM, one at the ODU and one inside or sometimes outside if the grounding bar/ring is on the outside of the tower.Nothing really wrong with just two, butone every 75-100 feetis standard. It can be different from tower to tower depending onhow the site was engineered and built. Example most ALtel sites have a ground bar at the port entery ( outside) to the shelter which ties into the main ground ring, on this site yes you would ground outside. You still have to ground the equipment to the rack inside the shelter, but your surge supressor would go outside. Other sites you will have to ground inside because the site designhas the bus bar ( ground bar ) inside just after the entery port. Both designs are very common. So to answer yes it does good to have a supressor inside its you last defence untill you get to the radio ( idu ) and then as long as its grounded to the rack and the rack is grounded to the ground ring inside the shelter it should be a well protected link but even then it isnt a garrenty that you are 100% safe. Lightning is a strange hazzarded to try to ward off. I am in Florida so I see just about everything as far as protect ion goes. And I can tell you right now that if your customer isnt a MAJOR carrier you site is probably not properly designed aganst lightning strikes so you need to bring them up to speed and properly ground the site or the customer is just asking for trouble.I work with a local WISP that had no Idea about grounding and I have had to redesign the ground rings on most of their sites. SO FYI it doesnt matter how much protection you put in if it isnt properlydesign inside and shelter and outyour equipment will get fried everytime. Mike -Original Message- From: JohnnyO [EMAIL PROTECTED]To: wireless@wispa.orgSent: Fri, 17 Feb 2006 01:20:54 -0600Subject: [WISPA] Lightning Protectione Does is really do any good to have the supressor inside of the enclosure grounded to everything inside ? I thought the suppressor was supposed to go straight to ground ?http://www.kywifi.com/images/vptower/CIMG5529.jpgCan someone clarify - I think we've been doing this wrong all of these years if this IS the proper way to do it .JohnnyO -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Lightning Protection
Does is really do any good to have the supressor inside of the enclosure grounded to everything inside ? I thought the suppressor was supposed to go straight to ground ? http://www.kywifi.com/images/vptower/CIMG5529.jpg Can someone clarify - I think we've been doing this wrong all of these years if this IS the proper way to do it . JohnnyO -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Lightning Protection
The only reason I asked this and think it's funny - *no offense intended* is b/c one of my techs did an install like this - Apparently when the tower got struck by lightning - the enclosure exploded due to the discharge ring on the supressor inside of the box... I mean literally exploded. I had routerboard / enclosure crap for 100s of ft all around the tower. Wish I could have gotten that on video. On Fri, 2006-02-17 at 01:20 -0600, JohnnyO wrote: Does is really do any good to have the supressor inside of the enclosure grounded to everything inside ? I thought the suppressor was supposed to go straight to ground ? http://www.kywifi.com/images/vptower/CIMG5529.jpg Can someone clarify - I think we've been doing this wrong all of these years if this IS the proper way to do it . JohnnyO -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/