[XFree86] fatal server error: could not open default font fixed
Hi Support, I have attached the log file, wondering if you could assist? Thanks, Patrick This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.3-3mdkenterprise i686 [ELF] Build Date: 24 March 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Apr 27 15:20:47 2006 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout en_US (**) XKB: layout: en_US (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to /usr/local/share/fonts,/usr/share/fonts,/usr/X11R6/lib/X11/fonts (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8090, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 1297,ab47 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2561 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24c2 card 1297,ab47 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1297,ab47 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1297,ab47 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1297,ab47 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 82 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 1297,ab47 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1297,ab47 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 1297,ab47 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0185 card 1462,9363 rev c1 class 03,00,00 hdr 00 (II) PCI: 02:06:0: chip 8086,1229 card 8086,0009 rev 05 class 02,00,00 hdr 00 (II) PCI: 02:08:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 02:0a:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdc00 - 0xddff (0x200) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd000 - 0xd7ff (0x800) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xde00 - 0xdfff (0x200) MX[B] (II)
[XFree86] Fatal Server Error
Hi, I am trying to install redhet linux 7.3 on an IBM intellistation M pro 6850. After the installation, I am able to login in at the command prompt. But once i type startx, it says Fatal Server Error: NO screens found. I am attaching the Xfree86 log with this email for you to have look and tell what should be done Regards, Roshan Herbert XFree86.0.log Description: Binary data
[XFree86] Fatal server error: could not open default font 'fixed'
Fatal server error: could not open default font 'fixed' XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-24.8.0 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Jan 31 07:28:55 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sun Feb 19 12:39:39 2006 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device ATI Radeon VE (**) |--Input Device Mouse0 (**) |--Input Device Mouse1 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8080, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0a:0: chip 10ec,8139 card 1186,1301 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0b:0: chip 10ec,8139 card 1186,1301 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3074 card 1106,3074 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1297,a232 rev 30 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,5159 card 1002,000a rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xec00 - 0xedff (0x200) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xe000 - 0xe7ff (0x800) MX[B] (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) ATI Radeon VE QY rev 0, Mem @ 0xe000/27, 0xed00/16, I/O @ 0xc000/8 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1
RE: [XFree86] FATAL SERVER ERROR
chmod +s /usr/X11R6/bin/XFree86 Will give the server root's permissions. Mark. On Mon, 16 Jan 2006, Garrett Jochimsen wrote: Thank you, but if I have to give the server write access how do I do that? Since I can't log in except for a DOS like prompt, how can I change permissions? Thanks again Garrett Jochimsen IT Department Documation LLC 715-552-5791 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Vojkovich Sent: Monday, January 16, 2006 11:44 AM To: Mathew John Cc: xfree86@xfree86.org Subject: Re: [XFree86] FATAL SERVER ERROR The server needs to have write access to /var/log/ so it can write its log file. It sounds like your server doesn't have root permissions. It's typical to make it suid root. Mark. On Mon, 16 Jan 2006, Mathew John wrote: Attn. Service department Sir We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. 2RG016685/ 2 Fault details: FATAL SERVER ERROR Can't open log file /var/log/xfree86.0.log xinit: connection refused (error no. 111 ) unable to connect to x server x init: no such process ( error no. 3 ) server error Please send your reply immediately Thanks best regards Mathew John Coca Cola Al Ain, United Arab Emirates +971 50 4492648 This message (including any attachments) contains information that may be confidential. Unless you are the intended recipient, you may not read or disclose to anyone the contents of the message. If you have received the message in error, please advise the sender by reply e-mail, and destroy all copies of the original message (including any attachments). Although this e-mail and any attachment are believed to be free from viruses, it is the responsibility of the recipient to ensure that they are virus free. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] FATAL SERVER ERROR
The server needs to have write access to /var/log/ so it can write its log file. It sounds like your server doesn't have root permissions. It's typical to make it suid root. Mark. On Mon, 16 Jan 2006, Mathew John wrote: Attn. Service department Sir We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. 2RG016685/ 2 Fault details: FATAL SERVER ERROR Can't open log file /var/log/xfree86.0.log xinit: connection refused (error no. 111 ) unable to connect to x server x init: no such process ( error no. 3 ) server error Please send your reply immediately Thanks best regards Mathew John Coca Cola Al Ain, United Arab Emirates +971 50 4492648 This message (including any attachments) contains information that may be confidential. Unless you are the intended recipient, you may not read or disclose to anyone the contents of the message. If you have received the message in error, please advise the sender by reply e-mail, and destroy all copies of the original message (including any attachments). Although this e-mail and any attachment are believed to be free from viruses, it is the responsibility of the recipient to ensure that they are virus free. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] FATAL SERVER ERROR
Thank you, but if I have to give the server write access how do I do that? Since I can't log in except for a DOS like prompt, how can I change permissions? Thanks again Garrett Jochimsen IT Department Documation LLC 715-552-5791 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Vojkovich Sent: Monday, January 16, 2006 11:44 AM To: Mathew John Cc: xfree86@xfree86.org Subject: Re: [XFree86] FATAL SERVER ERROR The server needs to have write access to /var/log/ so it can write its log file. It sounds like your server doesn't have root permissions. It's typical to make it suid root. Mark. On Mon, 16 Jan 2006, Mathew John wrote: Attn. Service department Sir We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. 2RG016685/ 2 Fault details: FATAL SERVER ERROR Can't open log file /var/log/xfree86.0.log xinit: connection refused (error no. 111 ) unable to connect to x server x init: no such process ( error no. 3 ) server error Please send your reply immediately Thanks best regards Mathew John Coca Cola Al Ain, United Arab Emirates +971 50 4492648 This message (including any attachments) contains information that may be confidential. Unless you are the intended recipient, you may not read or disclose to anyone the contents of the message. If you have received the message in error, please advise the sender by reply e-mail, and destroy all copies of the original message (including any attachments). Although this e-mail and any attachment are believed to be free from viruses, it is the responsibility of the recipient to ensure that they are virus free. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] FATAL SERVER ERROR
Attn. Service department Sir We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. 2RG016685/ 2 Fault details: FATAL SERVER ERROR Can't open log file /var/log/xfree86.0.log xinit: connection refused (error no. 111 ) unable to connect to x server x init: no such process ( error no. 3 ) server error Please send your reply immediately Thanks best regards Mathew John Coca Cola Al Ain, United Arab Emirates +971 50 4492648 This message (including any attachments) contains information that may be confidential. Unless you are the intended recipient, you may not read or disclose to anyone the contents of the message. If you have received the message in error, please advise the sender by reply e-mail, and destroy all copies of the original message (including any attachments). Although this e-mail and any attachment are believed to be free from viruses, it is the responsibility of the recipient to ensure that they are virus free. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: Server is already active for display 0
Hi Please let me what is the problem and what I should do for the same Regards Subhash XFree86.0.log Description: Binary data
[XFree86] Fatal Server Error: No Screens Found
Hi! I recently installed Turbolinux. When I try to start it, log-in, and type startx, i get an error than no screens are found. Unfortunatley, I've been unable to access my files that have the complete error. Please let me know if you need more info so I can try to find it. Thanks! Phillip C.
Re: [XFree86] Fatal Server Error: No Screens Found
On 9/3/05, P3 [EMAIL PROTECTED] wrote: I recently installed Turbolinux. When I try to start it, log-in, and type startx, i get an error than no screens are found. Unfortunatley, I've been unable to access my files that have the complete error. Please let me know if you need more info so I can try to find it. Some more information about the type of machine (what kind of video card?) and the version of TurboLinux (what version of XFree86?) would be helpful. What if you type X -configure and follow the resulting instructions? -Andy ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error- cannot run in framebuffer mode
On Sat, 23 Jul 2005 [EMAIL PROTECTED] wrote: I have installed the latest version of XFree86, 4.5.0. But when when I type startx or XFree86 -autoconfig. I will get this message. Fatal server error: Cannot run in framebuffer mode. Please specify busIDsfor all framebuffer devices I am running on the Mandrake Linux 9.0 version. I am using the onboard graphic card with the S3 Prosavage DDR chipset. Anyone can help me ?? Try running `XFree86 -configure` and use the XF86Config this generates. FWIW, this problem has been corrected in the CVS sources. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Academic Information and| fax:1-780-492-1729 | |Communications Technologies | email: [EMAIL PROTECTED] | | 352 General Services Building +---+ | University of Alberta | | | Edmonton, Alberta | Standard disclaimers apply| | T6G 2H1 | | | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error- cannot run in framebuffer mode
Hi, I have installed the latest version of XFree86, 4.5.0. But when when I type startx or XFree86 -autoconfig. I will get this message. Fatal server error: Cannot run in framebuffer mode. Please specify busIDsfor all framebuffer devices I am running on the Mandrake Linux 9.0 version. I am using the onboard graphic card with the S3 Prosavage DDR chipset. Below is the output of the log file. _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/fist.melaka.mmu.edu.my:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.5.0 Release Date: 16 March 2005 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux fist.melaka.mmu.edu.my 2.4.19-16mdk #1 Fri Sep 20 18:15:05 CEST 2002 i686 Build Date: 16 March 2005 Changelog Date: 16 March 2005 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Command line: X :0 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (EE) error, (WW) warning, (II) informational, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sat Jul 23 11:30:11 2005 (==) Using config file: /etc/X11/XF86Config. (II) No Screen or Layout sections in the config file. Appending default built-in configuration. (II) Module ABI versions: XFree86 ANSI C Emulation: 0.3 XFree86 Video Driver: 0.8 XFree86 XInput driver : 0.5 XFree86 Server Extension : 0.3 XFree86 Font Renderer : 0.5 (II) Loader running on linux (--) using VT number 7 (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.5.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.8 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8060, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3148 card 1106,3148 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b091 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:06:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 1186,1300 card 1186,1303 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0f:0: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80 (II) PCI: 00:11:0: chip 1106,3227 card 1106,3227 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:5: chip 1106,3059 card 1462,0430 rev 60 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1462,7095 rev 78 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8d04 card 1462,7095 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xec00 - 0xec0f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe000 - 0xe7ff (0x800) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) S3 Inc. VT8375 [ProSavage8 KM266/KL266] rev 0, Mem @ 0xec00/19, 0xe000/27 (II) AutoConfig: Primary PCI is 1:0:0 (II) AutoConfig: Running /usr/X11R6/bin/getconfig -X 4050 -I /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig -v 0x5333 -d 0x8d04 -r 0x00 -s 0x1462 -b 0x7095 -c 0x0300. (II) AutoConfig: New driver is savage. (==) Using default built-in configuration (54 lines) (==) --- Start of built-in configuration --- Section Module Identifier Builtin Default Modules Loadextmod Loaddbe Loadglx Loadfreetype EndSection Section Monitor Identifier Builtin Default Monitor Option TargetRefresh 75.0 EndSection Section Device Identifier
[XFree86] Fatal server error: HELP!
After type startx, it only show the screen of nVIDIA logo, then jump out back to console with following error code, what is that mean? and how to solve it out? Fatal server error: Caught signal 11. Server aborting XIO: fatal IO error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 events remaining.
Re: [XFree86] Fatal server error: HELP!
On 6/27/05, Sean [EMAIL PROTECTED] wrote: After type startx, it only show the screen of nVIDIA logo, then jump out back to console with following error code, what is that mean? and how to solve it out? Since you said you see the nVidia logo, it sounds like you're using their binary driver, which will make it difficult for people other than nVidia to give you assistance. My guess would be that you have the wrong nVidia driver installed. If you want any more assistance from this list, you're going to at least give us some more information. What card are you using? What driver and version are you using? What version of XFree86 are you using? What OS/distribution? Also, the full log file can be helpful, too. -Andy ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error
dear sir , i am new to use linux and i had installed linux9.0 on my system after winxp.i m ble to intall linux on my system but while installing i skep the step to choose graphic card .i have p3 computer with tomto board and intel 800MH processor .and now i am unable to go on graphic modeusing startx command it prompts message fatal server error:x10:fatal io error 104 (connectionreset by peer)on xserver":0.0" after 0 request .by giving this message it comes to command mode again. now what should i do for this short of problems. thank u khagendra dhakal
Re: [XFree86] Fatal server error : out of memory
On Thu, 14 Apr 2005, Hubert Lemoigne wrote: For my old computer, I have a Linux dual boot, and I can choose between : 1 - Suse 7.0 ( kernel 2.2.16, libc 6.1.3 and XFree 4.0.2 ) 2 - Slackware 9.1 ( kernel 2.4.22, glibc 2.3.2, XFree 4.3.0 ) The PC hardware contains : - Intel Pentium 133 Mhz - Ram 64 MBytes - Graphics card : Viewtop PCI ( Tseng ET4000W32, 2 MBytes Video Ram ). I had manually configured the XF86Config file ( see attached files ) ; for each OS, I have a copy of the same file in the directory : /etc/X11/ When I'm under Suse7.0, I can start the X server ( startx ) ( see Suse_XFree86.0.log ); but with Slackware9.1 the startx command fail with : Fatal server error out of memory XIO : fatal IO error 104 ( connection reset by peer ) on X server :0.0 after 0 requests ( 0 known processed ) with 0 events remaining. ( see Slackware_XFree86.0.log ) 3 attached files : - XF86Config - Suse_XFree86.0.log - Slackware_XFree86.0.log Can you tell me where is the bad configuration and how I can run the X server under Slackware. The latest fix for this problem is in XFree86 4.5.0. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax:1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +---+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply| | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error(4.4.0)
On Mon, Mar 21, 2005 at 08:07:31PM -0800, chelfan wrote: I am not able to start X session after i installed Xfree864.4.0 i installed the folowing other than the mandatory files Xdrm.tgz Xnest.tgz Xfsrv Xvfb not able to 'make' in /usr/X11R6/src/linux/kernel/xdrm files error: no member count The 4.4.0 DRM source won't build on some newer kernels. The 4.5.0 version builds on the latest kernels as of when it was released (last week). This is, however, unrelated to the problem you are seeing. i am attching the xfree86.0.log file According to the log, XFree86 is failing to guess what your mouse device is. This is improved significantly in 4.5.0. If it should still fail to guess your mouse device there, let us know. You can give it some help by creating a symlink from your mouse device to /dev/mouse. David ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error(4.4.0)
I am not able to start X session after i installed Xfree864.4.0 i installed the folowing other than the mandatory files Xdrm.tgz Xnest.tgz Xfsrv Xvfb not able to 'make' in /usr/X11R6/src/linux/kernel/xdrm files error: no member count i am attching the xfree86.0.log file please reply immediately __ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs XFree86.0.log Description: XFree86.0.log
[XFree86] Fatal Server Error - No Screens Found
When I attempt to configure, I receive an error message about missing libglide2x.so, not sure if it is related to my main problem of no screens found. My intuition leads me to suspect this is something to do with my having a video card in a AGP slot on a motherboard with an integrated video card. My display works fine in text mode, but I am unable to get into any kind of graphics mode. When I do startx I get a black screen and only return to text mode after several CTRL-C attempts. My monitor is plugged into the video card in the AGP slot. It works perfectly fine in Windows XP with my current setup. Thanks for any suggestions you may be able to provide. Bob King ** Contents of Log File Follow ** _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/subbob.us:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.4.0 Release Date: 29 February 2004 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux subbob.us 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 Build Date: 27 February 2004 Changelog Date: 29 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sat Jan 29 08:53:42 2005 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device NVIDIA GeForce 256 (generic) (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.4.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.4.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 14f1,1033 card 122d,4034 rev 08 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4150 card 1545,7c20 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4170 card 1545,7c21 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -100x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) (II) Bus 1 I/O range: [0] -100xd000 - 0xd0ff (0x100) IX[B] [1] -100xd400 - 0xd4ff (0x100) IX[B] [2] -100xd800 - 0xd8ff (0x100) IX[B] [3] -100xdc00 - 0xdcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -100xd400 - 0xd5ff (0x200)
Re: [XFree86] Fatal Server Error - No Screens Found
I couldn't find where agpgart is loaded. It needs to be loaded for you video card to work well. [EMAIL PROTECTED] wrote: When I attempt to configure, I receive an error message about missing libglide2x.so, not sure if it is related to my main problem of no screens found. My intuition leads me to suspect this is something to do with my having a video card in a AGP slot on a motherboard with an integrated video card. My display works fine in text mode, but I am unable to get into any kind of graphics mode. When I do startx I get a black screen and only return to text mode after several CTRL-C attempts. My monitor is plugged into the video card in the AGP slot. It works perfectly fine in Windows XP with my current setup. Thanks for any suggestions you may be able to provide. Bob King ** Contents of Log File Follow ** _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/subbob.us:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.4.0 Release Date: 29 February 2004 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux subbob.us 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 Build Date: 27 February 2004 Changelog Date: 29 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sat Jan 29 08:53:42 2005 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device NVIDIA GeForce 256 (generic) (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.4.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.4.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 14f1,1033 card 122d,4034 rev 08 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4150 card 1545,7c20 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4170 card 1545,7c21 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -100x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) (II) Bus 1 I/O range: [0] -100xd000 - 0xd0ff (0x100) IX[B] [1] -100xd400 - 0xd4ff (0x100) IX[B] [2] -10
[XFree86] Re: [XFree86] Fatal Server Error - No Screens Found
Does that mean I need to update the kernel? I found the following information on the agpgart you refer to at: http://www.xfree86.org/~dawes/845driver.html In addition to building/installing XFree86 CVS code, a recent 2.4.x kernel is needed. 2.4.19 or later is recommended. If you want to use the DRI support, an updated i830 DRM module is also required, and it is best to build one from either the XFree86 or DRI source tree. To do this you will also need your kernel source installed. Here is an example of how to build and load the i830 DRM module: # cd xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel # make -f Makefile.linux i830.o # modprobe agpgart # rmmod i830 # insmod i830.o Here is an example of how to install the i830 DRM module so that it will be loaded automatically when needed: # mv /lib/module/`uname -r`/kernel/drivers/char/drm/i830.o \ /lib/module/`uname -r`/kernel/drivers/char/drm/i830.o.save # cp i830.o /lib/module/`uname -r`/kernel/drivers/char/drm For full functionality when using the 852GM, 855GM or 865G chipsets, an updated agpgart kernel module is also required. A patch for the 2.4.20 kernel can be found here, a patch for the 2.5.56 kernel is here, and a tarball with the complete source for the agpgart driver in a form that can be built standalone for 2.4.x and older 2.5.x kernels can be found here. The 852GM, 855GM and 865G support should be included with future 2.5.6x kernels. I couldn't find where agpgart is loaded. It needs to be loaded for you video card to work well. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error - No Screens Found
You're using the wrong driver. You have an ATI card, not an NVIDIA card. In the /etc/X11/XF86Config-4 file, replace Driver nv with Driver ati. Mark. On Sat, 29 Jan 2005 [EMAIL PROTECTED] wrote: When I attempt to configure, I receive an error message about missing libglide2x.so, not sure if it is related to my main problem of no screens found. My intuition leads me to suspect this is something to do with my having a video card in a AGP slot on a motherboard with an integrated video card. My display works fine in text mode, but I am unable to get into any kind of graphics mode. When I do startx I get a black screen and only return to text mode after several CTRL-C attempts. My monitor is plugged into the video card in the AGP slot. It works perfectly fine in Windows XP with my current setup. I'm running with a dual boot system - linux and Win XP - so I am certain the monitor/video card combo works in Windows. Thing's I've tried already: -- searching the XFree86 archive for libglide2x.so issues - didn't find anything that helped with my situation -- copying libglide3.so to libglide2x.so - didn't work, was not able to fool the system this way -- downloading and installing a libglide2 RPM - would not install, there were conflicts with other installed RPMs -- removing libglide3 RPM - could not do it, too many dependencies -- forced installation of the libglide2 RPM - still receive the libglide2x.so error message -- plugging a second monitor into the port connected to the integrated video card on the motherboard - no change Thanks for any suggestions you may be able to provide. Bob King ** Contents of Log File Follow ** _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/subbob.us:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.4.0 Release Date: 29 February 2004 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux subbob.us 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 Build Date: 27 February 2004 Changelog Date: 29 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sat Jan 29 08:53:42 2005 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device NVIDIA GeForce 256 (generic) (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.4.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.4.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 14f1,1033 card 122d,4034 rev 08 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip
Re: [XFree86] Re: [XFree86] Fatal Server Error - No Screens Found
Some thing like that, but not exactly. That is for Intel's chip. You don't have an Intel chip. I think you have GeForce. Some kernel already have it. You just have to enable it. I don't know about 2.4.7-10. It is available in 2.4.18. [EMAIL PROTECTED] wrote: Does that mean I need to update the kernel? I found the following information on the agpgart you refer to at: http://www.xfree86.org/~dawes/845driver.html In addition to building/installing XFree86 CVS code, a recent 2.4.x kernel is needed. 2.4.19 or later is recommended. If you want to use the DRI support, an updated i830 DRM module is also required, and it is best to build one from either the XFree86 or DRI source tree. To do this you will also need your kernel source installed. Here is an example of how to build and load the i830 DRM module: # cd xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel # make -f Makefile.linux i830.o # modprobe agpgart # rmmod i830 # insmod i830.o Here is an example of how to install the i830 DRM module so that it will be loaded automatically when needed: # mv /lib/module/`uname -r`/kernel/drivers/char/drm/i830.o \ /lib/module/`uname -r`/kernel/drivers/char/drm/i830.o.save # cp i830.o /lib/module/`uname -r`/kernel/drivers/char/drm For full functionality when using the 852GM, 855GM or 865G chipsets, an updated agpgart kernel module is also required. A patch for the 2.4.20 kernel can be found here, a patch for the 2.5.56 kernel is here, and a tarball with the complete source for the agpgart driver in a form that can be built standalone for 2.4.x and older 2.5.x kernels can be found here. The 852GM, 855GM and 865G support should be included with future 2.5.6x kernels. I couldn't find where agpgart is loaded. It needs to be loaded for you video card to work well. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error - No Screens Found
Mark - Thank you many times over. That simple change of nv to ati made it work. Bob You're using the wrong driver. You have an ATI card, not an NVIDIA card. In the /etc/X11/XF86Config-4 file, replace Driver nv with Driver ati. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server error..
Hi, I had just started my linux machine and i faced this problem. GUI login screen is not coming and after booting blank screen comes with flickering and later displaying message unable to start XServer. and when i disable gdm in the console screen it displays. Login:gpm: oops() invoked from gpm.c(186) dev/ttyS1: Input/output error I am using RedHat Linux 9.0. Thanks. Manish.__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com XFree86.0.log Description: XFree86.0.log
[XFree86] Fatal server error unable to load required base modules
Dear list members, Please help. I run Red hat 9, and it works fine for a while, like maybe eight times. Then I get a server crash message about the failure to load a bitmap and pcdata whatever that is. Then I am unable to load my KDE desktop, so I have to re-install Red Hat. Thank you in advance for any help you can offer. The error message I get is as follows: XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-6 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Feb 27 10:06:59 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Nov 29 18:57:19 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (WW) Warning, couldn't open module bitmap (II) UnloadModule: bitmap (EE) Failed to load module bitmap (module does not exist, 0) (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 Fatal server error: Unable to load required base modules, Exiting... When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED]
Re: [XFree86] Fatal server error unable to load required base modules
* [EMAIL PROTECTED] [EMAIL PROTECTED] [30/11/2004 0950EST]: Please help. I run Red hat 9, and it works fine for a while, like maybe eight times. Then I get a server crash message about the failure to load a bitmap and pcdata whatever that is. Then I am unable to load my KDE desktop, so I have to re-install Red Hat. Thank you in advance for any help you can offer. The error message I get is as follows: [snip] (==) ModulePath set to /usr/X11R6/lib/modules ^^^ [...] (II) LoadModule: bitmap (WW) Warning, couldn't open module bitmap ^ (II) UnloadModule: bitmap (EE) Failed to load module bitmap (module does not exist, 0) (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 Fatal server error: Unable to load required base modules, Exiting... The server log output tells you exactly what is wrong. You are missing some base modules -- some components required by the X server -- that should exist below the path /usr/X11R6/lib/modules/. Specifically you are missing (at least) the file /usr/X11R6/lib/modules/fonts/libbitmap.a and I would assume various others. You do not have to re-install your entire OS (afterall, this is not a Redmond product); you should be able to get away with just re-intalling various XFree86 packages. The XFree86 modules are located in the base XFree86 RPM package in Red Hat 9 -- specifically, the package XFree86-4.3.0-2. You should re-install this package (and possibly some other XFree86 packages) and see if your problem goes away. -- Keith R. John Warno (SA) | /\ Y /\ | www.kayakinteractive.com I n t e r a c t i v e ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error unable to load required base modules
You have an incomplete or corrupted XFree86 installation. I have heard of this many times and only on Red Hat 9. The only conclusion I can come to is that sometimes Red Hat 9 deletes essential XFree86 modules for some unknown reason. I don't know of anyone doing a thorough investigation to determine the cause for sure. Reinstalling XFree86 alone should be sufficient to get things working again. Mark. On Tue, 30 Nov 2004 [EMAIL PROTECTED] wrote: Dear list members, Please help. I run Red hat 9, and it works fine for a while, like maybe eight times. Then I get a server crash message about the failure to load a bitmap and pcdata whatever that is. Then I am unable to load my KDE desktop, so I have to re-install Red Hat. Thank you in advance for any help you can offer. The error message I get is as follows: XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-6 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Feb 27 10:06:59 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Nov 29 18:57:19 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (WW) Warning, couldn't open module bitmap (II) UnloadModule: bitmap (EE) Failed to load module bitmap (module does not exist, 0) (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 Fatal server error: Unable to load required base modules, Exiting... When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found - Reg.
Respected sir, I am new to Linux and when I try to start my x-window using startx, I have been thrown with a hands full of messages. The error message, from /var/log/XFree86.0.log, is makes me panic when i am trying to host startx. If you could give me some suggestions, that i could perform in a sequence, that would be helpful. I would appreciate. Error Message: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Oct 18 16:33:58 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor My Monitor (**) | |--Device My Video Card (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 500 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc101 (**) XKB: model: pc101 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/local/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/local/). (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8060, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card , rev 22 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0596 card 1106, rev 09 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card , rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 1106,3050 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 00:09:0: chip 10ec,8029 card 10ec,8029 rev 00 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 80 (II) PCI: 00:0c:1: chip 13f6,0211 card 13f6,0211 rev 10 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6326 card 1039,6326 rev 0b class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0xc800 -
Re: [XFree86] Fatal server error: no screens found - Reg.
On Monday 18 October 2004 13:04, Koushik wrote: (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset generic found You seem to have chosen to use the generic VGA driver. If I remember correctly this mode can only display upto 640x480 at 8 bit colour mode. (**) VGA(0): Depth 16, (--) framebuffer bpp 16 (==) VGA(0): RGB weight 565 (==) VGA(0): Default visual is TrueColor (==) VGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) VGA(0): videoRam: 256 kBytes. You then try to run 16 bit colour mode. This does not fit within the memory of a generic VGA card (256 kB). It seems there are two options to solving your problem: 1. Use the correct driver for your video chipset. 2. If the generic VGA driver is indeed all your chipset can handle: use 8 bit colour mode, or buy a better graphics card. Regards, Pieter Hulshoff ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error
Hey thanks a lot, That totally fixed the problem. Those 'wrong' values were actually what I input during the config process. I ran lspci when it asked for that info and I guess I didn't really understand the output properly. However if I just left that step blank, or later deleted the entry from the config file then everything worked out. Again, thanks a lot, Erik On Thu, 14 Oct 2004 10:46:42 -0700 (PDT), Mark Vojkovich [EMAIL PROTECTED] wrote: Remove the BusID line from the Section Device in your XF86Config-4 file. It's wrong, and the server would have found the card by itself if it wasn't for the explicit instruction to look for the card in the wrong place. Mark. On Thu, 14 Oct 2004, Erik Knight wrote: Hi everyone, I've been trying to to solve this for a couple of days now. I've read all the documentation I could find, with no changes. I've installed all the autodection packages to see if my variables were wrong. I've installed XFree86 manually (not using apt-get x-window-system). The system is debian with kernel 2.2.20-idepci on a i686. The video card is a Riva tnt2, which should be compatible with the 'nv' driver. Then monitor is an emachines eview17 I've got the right specs for it. Keyboard and mouse are standard us layout logitech cordless combo. I've attached the comfig file and the log file. If anyone could help me out I'd really appreciate it. Thanks Erik ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error
Hi everyone, I've been trying to to solve this for a couple of days now. I've read all the documentation I could find, with no changes. I've installed all the autodection packages to see if my variables were wrong. I've installed XFree86 manually (not using apt-get x-window-system). The system is debian with kernel 2.2.20-idepci on a i686. The video card is a Riva tnt2, which should be compatible with the 'nv' driver. Then monitor is an emachines eview17 I've got the right specs for it. Keyboard and mouse are standard us layout logitech cordless combo. I've attached the comfig file and the log file. If anyone could help me out I'd really appreciate it. Thanks Erik XF86Config-4 Description: Binary data XFree86.0.log Description: Binary data
Re: [XFree86] fatal server error
Remove the BusID line from the Section Device in your XF86Config-4 file. It's wrong, and the server would have found the card by itself if it wasn't for the explicit instruction to look for the card in the wrong place. Mark. On Thu, 14 Oct 2004, Erik Knight wrote: Hi everyone, I've been trying to to solve this for a couple of days now. I've read all the documentation I could find, with no changes. I've installed all the autodection packages to see if my variables were wrong. I've installed XFree86 manually (not using apt-get x-window-system). The system is debian with kernel 2.2.20-idepci on a i686. The video card is a Riva tnt2, which should be compatible with the 'nv' driver. Then monitor is an emachines eview17 I've got the right specs for it. Keyboard and mouse are standard us layout logitech cordless combo. I've attached the comfig file and the log file. If anyone could help me out I'd really appreciate it. Thanks Erik ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error!!
Hi !! This message was displayed when mi Xserver Crashes!! Can you help me to resolv this problem I aprreciate your help!! Saludos from Obregon, Sonora, MEXICO!! XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Sep 29 18:39:03 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout es (**) XKB: layout: es (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/CID/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/CID/). (==) FontPath set to /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8090, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 1458,2560 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 1458,2562 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 1458,24c2 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1458,24c2 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1458,24c2 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1458,5006 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 82 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 1458,24c2 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1458,24c2 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 1458,a002 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:05:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe800 - 0xe80f (0x10) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device rev 3, Mem @ 0xe000/27, 0xe810/19 (II) Addressable bus resource ranges are [0] -1 0 0x
[XFree86] Fatal Server Error: No Screens found
Hi, I have done a fresh install on Red Hat Linux 7.3. I am not able to get the GUI. The following are the relevant files (attached): 1. XFree86.0.log 2. XF86Config-4 (as shown in the log) 3. Version of XFree86 XFree86 Version 4.2.0 4. Operating System Red Hat Linux release 7.3 (Valhalla) 5. Video Hardware ATI Fire GL E 1,64MB for DELL M992 (19 CRT) Any suggestions are greatly welcome, Thanks, Krishna __ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail XFree86.0.log Description: XFree86.0.log # XFree86 4.2.0 configuration generated by Xconfigurator 4.10.7 Section ServerLayout Identifier XFree86 Configured Screen 0 Screen0 0 0 InputDeviceMouse0 CorePointer InputDeviceKeyboard0 CoreKeyboard EndSection # Red Hat Linux 6.0 and later use the xfs font server for improved # interactive performance Section Files FontPath unix/:7100 EndSection # Module loading section Section Module Load dbe # Double-buffering Load GLcore # OpenGL support Load dri # Direct rendering infrastructure Load glx # OpenGL X protocol interface Load extmod # Misc. required extensions Load v4l # Video4Linux # Load record# X event recorder # You only need the following two modules if you do not use xfs. # Load freetype # TrueType font handler # Load type1 # Adobe Type 1 font handler EndSection Section InputDevice Identifier Keyboard0 Driver keyboard Option XkbLayout us EndSection Section InputDevice Identifier Mouse0 Driver mouse Option Device /dev/mouse Option Protocol IMPS/2 Option Emulate3Buttons off Option ZAxisMapping 4 5 EndSection Section Monitor Identifier DELL P992 VendorName Unknown ModelName Unknown HorizSync 30 - 107 VertRefresh 48 - 170 Option dpms EndSection Section Device Identifier ATI|Radeon R200 QH Driver radeon BoardName Unknown # DRI is not currently supported on Radeon 8500, as of XFree86 4.2.0 Option nodri EndSection Section Device Identifier Linux Frame Buffer Driver fbdev BoardName Unknown EndSection Section Screen Identifier Screen0 Device ATI|Radeon R200 QH Monitor DELL P992 DefaultDepth 16 Subsection Display Depth 16 Modes 640x480 EndSubSection EndSection Section DRI Mode 0666 EndSection [EMAIL PROTECTED] root]# XFree86 -version XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present [EMAIL PROTECTED] root]# Video Card ATI Radeon 8500 - 64MB Monitor DELL P992 ( as probed ) 17 CRT[EMAIL PROTECTED] root]# cat /etc/redhat-release Red Hat Linux release 7.3 (Valhalla) [EMAIL PROTECTED] root]#
Re: [XFree86] Fatal Server Error: No Screens found
The Video card and Monitor are 4. Operating System Red Hat Linux release 7.3 (Valhalla) 5. Video Hardware ATI Fire GL E 1,64MB for DELL M992 (19 CRT) I noticed that I put it wrong in the attached files. Thanks __ Do you Yahoo!? Vote for the stars of Yahoo!'s next ad campaign! http://advision.webevents.yahoo.com/yahoo/votelifeengine/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error
Error fatal server error running XFree86 3.3.6 on my Debian 3.0 using a Cirrus Logic card with 800x600x256 mode. If i run whith 640x480x256 configuration mode all work fine. Extract of XF86config: ection Device Identifier Cirrus VendorName CirrusLogic BoardName GD5420 #VideoRam512 # Device section for Cirrus Logic GD5420/2/4/6/8/9-based cards. #MemBase 0x00e0 #MemBase 0x04e0 #Option linear # Use Option no_bitblt if you have graphics problems. If that fails # try Option noaccel. # Refer to /usr/X11R6/lib/doc/README.cirrus. # To allow linear addressing, uncomment the Option line and the # address that the card maps the framebuffer to. #Clocks 25.23 28.32 0.00 0.00 31.50 EndSection # ** # Screen sections # ** # The Colour SVGA server Section Screen Driver svga # Use Device Generic VGA for Standard VGA 320x200x256 #Device Generic VGA Device Cirrus Monitor Compaq Subsection Display Depth 8 # Omit the Modes line for the Generic VGA device Modes 800x600 (IF I PUT HERE 640X480 THE XSERVER RUN WELL) ViewPort0 0 # Use Virtual 320 200 for Generic VGA EndSubsection XSERVER LOG : X: unable to open wrapper config file /etc/X11/Xwrapper.config XFree86 Version 3.3.6a / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.4.13 i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): (using VT number 7) XF86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: xfree86(us_intl) (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3 (**) SVGA: Graphics device ID: Cirrus (**) SVGA: Monitor ID: Compaq (--) SVGA: Mode 640x480 needs hsync freq of 53.01 kHz. Deleted. (--) SVGA: Mode 1152x864 needs hsync freq of 53.51 kHz. Deleted. (--) SVGA: Mode 800x600 needs hsync freq of 55.84 kHz. Deleted. (--) SVGA: Mode 1024x768 needs hsync freq of 56.48 kHz. Deleted. (--) SVGA: Mode 1280x1024 needs hsync freq of 51.02 kHz. Deleted. (--) SVGA: Mode 800x600 needs hsync freq of 64.02 kHz. Deleted. (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:un scaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Spe edo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11 R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/ (--) SVGA: chipset: clgd5420 (--) SVGA: videoram: 512k (--) SVGA: clocks: 25.23 28.32 0.00 0.00 31.50 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 34.167 MHz (--) SVGA: There is no defined dot-clock matching mode 800x600 Fatal server error: No valid modes found. Could help me anyone?? RGDS ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error
Sir, I am reporting a problem related to installing xfree86 in one of my freebsd machines. I am attaching the log file for your referrence. Many thanks, -Ariel XFree86.0.log Description: Binary data
[XFree86] Fatal server error
xfree86 -bash-2.05b$ xinit Fatal server error: PAM authentication failed, cannot start X server. Perhaps you do not have console ownership? When reporting a problem related to a server crash, please send the full server output, not just the last messages. Please report problems to [EMAIL PROTECTED] [EMAIL PROTECTED] 2004-06-02 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
Hello I am using mandrake linux 9.2 operating system and is my mail server. When I restart the system to change hardware (mouse) it start at the console. I login as root and entered my root password. When I attempt to swith to graphical user interface (ie kde) it report the following error fatal server error could not open default font 'fixed' XIOl : fatal IO error 104 (Connection reset by peer) on X server ":0.0" after zero requests (0 known processed) with 0 events remaining. Yours Maiyama kabir Do you Yahoo!?Yahoo! Domains - Claim yours for only $14.70/year
[XFree86] Fatal Server error when attempting to configure XFree86
Here is the XFree86.0.log. I'm new to FreeBSD. Any help or suggestions would be greatly appreciated. Matthew J. Murdza Johnson Controls, Inc. Network Engineer Global Infrastructure, N. Amer. Asia 734-254-7651 Office 734-355-5165 Cell XFree86.0.log Description: Binary data
RE: [XFree86] Fatal Server error when attempting to configure XFree86
You need to upgrade. Your video card is not supported in 4.2.1. The current version is 4.4.0. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, May 13, 2004 2:03 PM To: [EMAIL PROTECTED] Subject: [XFree86] Fatal Server error when attempting to configure XFree86 Here is the XFree86.0.log. I'm new to FreeBSD. Any help or suggestions would be greatly appreciated. Matthew J. Murdza Johnson Controls, Inc. Network Engineer Global Infrastructure, N. Amer. Asia 734-254-7651 Office 734-355-5165 Cell ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error:
root wrote: could not open default font when reporting a problem related to a server crash, please send the full server output, not just the last message. XIO: fatal IO error 104(Connection reset by peer) on X server :0.0 after 0 request (0 known processed) with 0 events remaining. please try helpme to resolve this problem. mi email is [EMAIL PROTECTED], send me a solution for this problem please. Enable the X Font Server (xfs). Otherwise ensure you have installed the fonts for X and have the path correct in your config file. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: lockup
Hi all, i'm using : OS - redhat Linux 9 - KDE I get following errors at boot time : - server Authorization dir (doemon / ServerAuthDir) is set to /var/gdm is NOT owned by user gdm group gdm. Please correct the ownership or gdm configuration /etc/X11/gdm.conf and RESTART gdm Query : HOW TO DO IT ... --- At present i start by : startx (at root) and facing more error as : - Fatal server error : lockup - server crash !! (may be..) - I viewed : /var/log/XFree86.0.log found : (II) I810(0): direct rendering: Failed - Xinit : connection to X server lost Hangup GOT SIGNUP startkde : shutting down... - my /var/log/xfree86.0.log file is : - XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Apr 13 10:00:08 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8003080c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 8086,2562 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,24c0 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,24c0 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,24c0 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 8086,24c0 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 82 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 8086,24c0 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 13f6,0300 rev 02 class 04,01,00 hdr 00 (II) PCI: 03:01:0: chip 10ec,8139 card 10bd,0320 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xdfd0 - 0xdfdf (0x10) MX[B]
[XFree86] Fatal server error: no screen found
Hi! What should I do? -- ICQ# 73217209 http://www.againsttcpa.com http://www.stop1984.com +++ NEU bei GMX und erstmalig in Deutschland: TÜV-geprüfter Virenschutz +++ 100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz XFree86.0.log Description: Binary data
Re: [XFree86] Fatal server error: no screen found
On Sunday 21 March 2004 14:44, Johannes Hauber wrote: What should I do? Considering the stack of primary devices X seems to find, I think you may want to consider setting the BusID to one of them to force X to choose. Currently it doesn't seem to be able to do that. Try adding BusID0:8:0 to your Device section, or if that doesn't work, try some of the other IDs mentioned for your primary devices. Regards, Pieter Hulshoff ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error: no screen found
On Sun, 21 Mar 2004, Pieter Hulshoff wrote: On Sunday 21 March 2004 14:44, Johannes Hauber wrote: What should I do? Considering the stack of primary devices X seems to find, I think you may want to consider setting the BusID to one of them to force X to choose. Currently it doesn't seem to be able to do that. Try adding BusID0:8:0 to your Device section, or if that doesn't work, try some of the other IDs mentioned for your primary devices. Regards, The syntax would be: BusID PCI:0:8:0 That's worth a try. This is either a mothboard BIOS bug or bus probing bug in XFree86. If /proc/pci reports these redundant S3 devices as well, I would say it's a BIOS bug and you should look into an upgrade. If /proc/pci doesn't show the multiple S3 devices, then perhaps this is a bug that was fixed in XFree86 4.4. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error: FreeBSD 5.2.1 HELP, please!
This problem on the BSDs usually occurs because the system's security level is set too high to run XFree86. Mark. On Mon, 8 Mar 2004, Neolith Cassidy wrote: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 5.2.1 i386 [ELF] Build Date: 13 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers:(--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Mar 8 20:17:30 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Card0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (==) Keyboard: CustomKeycode disabled (**) FontPath set to/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (WW) checkDevMem: failed to open /dev/mem (Operation not permitted) (--) Using syscons driver with X support (version 2.0) (--) using VT number 5 Fatal server error: xf86EnableIO: Failed to open /dev/io for extended I/O When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] P.S. I also thought I should add... it worked when I first Installed it, then after rebooting it died :-) _ One-click access to Hotmail from any Web page download MSN Toolbar now! http://clk.atdmt.com/AVE/go/onm00200413ave/direct/01/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error: FreeBSD 5.2.1 HELP, please!
turning down the security level... worked! thanx mark! Later Days... /---\ | Neolith100(at)hotmail.com | | Webpage comming soon! | \---/ IDKFA,DNSTUFF! _ Fast. Reliable. Get MSN 9 Dial-up - 3 months for the price of 1! (Limited-time Offer) http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error: FreeBSD 5.2.1 HELP, please!
XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 5.2.1 i386 [ELF] Build Date: 13 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers:(--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Mar 8 20:17:30 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Card0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (==) Keyboard: CustomKeycode disabled (**) FontPath set to/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (WW) checkDevMem: failed to open /dev/mem (Operation not permitted) (--) Using syscons driver with X support (version 2.0) (--) using VT number 5 Fatal server error: xf86EnableIO: Failed to open /dev/io for extended I/O When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] P.S. I also thought I should add... it worked when I first Installed it, then after rebooting it died :-) _ One-click access to Hotmail from any Web page download MSN Toolbar now! http://clk.atdmt.com/AVE/go/onm00200413ave/direct/01/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server error
Fatal Server Error Slackware 9.1 Kernel 2.6.3 xfree86 4.3.0 Any idea please? - Thanks a lot in advance - Mauro (Italy) - XFree86 Version 4.3.0Release Date: 27 February 2003X Protocol Version 11, Revision 0, Release 6.6Build Operating System: Linux 2.4.22 i686 [ELF]Build Date: 16 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version.Module Loader presentMarkers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 3 15:57:05 2004(==) Using config file: "/etc/X11/XF86Config"(==) ServerLayout "Simple Layout"(**) |--Screen "Screen 1" (0)(**) | |--Monitor "My Monitor"(**) | |--Device "at3d"(**) |--Input Device "Mouse1"(**) |--Input Device "Keyboard1"(==) Keyboard: CustomKeycode disabled(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/l$(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"(==) ModulePath set to "/usr/X11R6/lib/modules"(--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device)(II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4(II) Loader running on linux(II) LoadModule: "bitmap"(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a(II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4(II) Loading font Bitmap(II) LoadModule: "pcidata"(II) Loading /usr/X11R6/lib/modules/libpcidata.a(II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6(II) PCI: Probing config type using method 1(II) PCI: Config type is 1(II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000(II) PCI: PCI scan (all values are in hex)(II) PCI: 00:00:0: chip 8086,7180 card , rev 03 class 06,00,00 hdr 00(II) PCI: 00:01:0: chip 8086,7181 card , rev 03 class 06,04,00 hdr 01(II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80(II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80(II) PCI: 00:04:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00(II) PCI: 00:04:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00(II) PCI: 00:04:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00(II) PCI: 00:09:0: chip 1142,643d card , rev 02 class 03,00,00 hdr 00(II) PCI: 00:0a:0: chip 1274,1371 card 1274,1371 rev 08 class 04,01,00 hdr 00(II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00(II) PCI: End of PCI scan(II) Host-to-PCI bridge:(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)(II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B](II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) PCI-to-PCI bridge:(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0003 (VGA_EN is cleared)(II) Bus 1 I/O range: [0] -1 0 0xb000 - 0xbfff (0x1000) IX[B](II) Bus 1 non-prefetchable memory range: [0] -1 0 0xede0 - 0xedef (0x10) MX[B](II) Bus 1 prefetchable memory range: [0] -1 0 0xe5c0 - 0xe5cf (0x10) MX[B](II) PCI-to-ISA bridge:(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)(--) PCI:*(0:9:0) Alliance Semiconductor Corporation ProMotion AT3D rev 2, Mem @ 0xef00/24, I$(II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B](II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B](II) PCI Memory resource overlap reduced 0xe800 from 0xebff to 0xe7ff(II) Active PCI resource ranges: [0] -1 0 0xeefeff00 - 0xeefe (0x100) MX[B] [1] -1 0 0xe800 - 0xe7ff (0x0) MX[B]O [2] -1 0 0xeeff - 0xeeff (0x1) MX[B](B) [3] -1 0 0xef00 - 0xefff (0x100) MX[B](B) [4] -1 0 0xd800 - 0xd8ff (0x100) IX[B] [5] -1 0 0xda00 - 0xda3f (0x40) IX[B] [6] -1 0 0xdc00 - 0xdc1f (0x20) IX[B] [7] -1 0 0xffa0 - 0xffaf (0x10) IX[B] [8] -1 0 0xde00 -
[XFree86] Fatal Server Error -XFree86
Hi, I have installed XFree86 4.3.0 from this url ftp://ftp.xfree86.org/pub/XFree86/ in my linux intel system for this video driver is cirrus. i have the following erros, Fatal Server error,Server is already active display.0,if this server is no longer running,remove /tmp/.x0-lock and start again this comes when attemptto the following command, XFree86 -configure. also i cannot able to get GNOME or KDE menu. thanks in advance, kamesh raja s Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more. Download now.
Re: [XFree86] Fatal Server Error -XFree86
kamesh raja swaminathan wrote: I have installed XFree86 4.3.0 from this url Fatal Server error,Server is already active display.0,if this server is no longer running,remove /tmp/.x0-lock and start again this comes when attempt to the following command, XFree86 -configure. rm -rf /tmp/.x0-lock XFree86 -configure If it is generated, your /var/log/XFree86.0.log would be useful. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error : No screens found
On Fri, Jan 16, 2004 at 05:07:55PM +0100, Jean-Luc SAVIO wrote: Bonjour ! I've got some problems with a Linux Slackware 8.0 on a pc Nec with the same caracteristics than the nec.txt document. When I launch the command startx a Fatal server error : No screens found occures with the following log file /var/log/XFree86.0.log. May somebody help me ? Your using the wrong driver. You should be using the i810 driver and not the cirrus driver. Alan. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
Hello there Running RH9 X Server won't come up..message I get is Fatal Server Error Could nor topen default font 'fixed' Could you advise a fix?? Kindest regards Imran.javeed ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error: No screens found (K12LTSP, Xfree86)
There are no errors in either of those logfiles. They both look like a properly working X-servers. What exactly is the problem? Mark. PS. You should remove the videoram line from your Section Device in the /etc/X11/XF86Config file though. The server will autodetect the correct amount. Overriding the autodetected value in the XF86Config file could cause bad behavior if it's not accurate. On Thu, 11 Dec 2003, eisaac wrote: I am a teacher at Leto High School in Tampa, Florida. Today I installed K12LTSP3.1.2 on a test computer and attempted a network boot of a thin client computer, but it failed. I have no idea how to fix it. As instructed on the error screen, I have attached the xfree log files that I found. I am a Linux newbie, but am interested in using opensource solutions in our school. Money is very hard to come by! Please help me, if you can. Thank you. Eric Isaac, Computer Electronics Instructor, Leto High School ___ No banners. No pop-ups. No kidding. Introducing My Way - http://www.myway.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error while trying to startx
Sudip Shrestha 402.301.3940(c) 1017 Fairfax Rd., #17 Bellevue, NE 68005 XFree86.0.log Description: Binary data
[XFree86] Fatal server error:
Je veux démarrer mon X Server, mais j'ai cette erreur. Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership? When reporting a problem related to a server crash, please sendthe full server output, not just the last messages.Please report problems to [EMAIL PROTECTED]. Xlib: connection to ":0.0" refused by serverXlib: Invalid MIT-MAGIC-COOKIE-1 keygiving up.xinit: unable to connect to X serverxinit: No such process (errno 3): Server error.Couldnt get a file descriptor referring to the console[EMAIL PROTECTED] vincent]$ Quelqu'un peut-il m'aider ? Vincent KOUAKOU [EMAIL PROTECTED] [EMAIL PROTECTED] Tel : +22521239089 Cel : +22507059164 Fax : +22521239099
Re: [XFree86] Fatal server error: no screens found
Hi saw thanks for the suggestion, it worked! Mohammed From: Hacksaw [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [XFree86] Fatal server error: no screens found Date: Mon, 17 Nov 2003 20:54:57 -0500 Mohammed: It seems like there isn't a driver for this chipset. Is it very new? If you look at the stuff at the end, U1 is never mentioned. You might try the vesa driver, which should allow you to use X at some pretty good resolutions, though probably not GL. I'd guess that there might soon be a new driver out to cover the U1, possibly in 4.4.0. If you are feeling bold, you might even try the development drivers, though of course you need to be confident in what you are doing with the computer. -- Act always in accordance with conscience. http://www.hacksaw.org -- http://www.privatecircus.com -- KB1FVD ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 _ Sign-up for a FREE BT Broadband connection today! http://www.msn.co.uk/specials/btbroadband ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found
Hi all This seems to be a common problem, but i havent found a solution. im using Redhat 9 on a compaq evo 1015v and a Radeon Mobility U1 During installation X was running (it was a graphical install) but after installation i cant run X. get the usual (EE) No devices detected. Fatal server error: no screens found thanks, Mohammed XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Nov 18 01:07:15 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout gb (**) XKB: layout: gb (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab0 card , rev 13 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,700f card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 00 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:08:0: chip 10b9,5451 card 0e11,00b0 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac50 card 4000, rev 02 class 06,07,00 hdr 02 (II) PCI: 00:0b:0: chip 10ec,8139 card 0e11,00b0 rev 20 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 14f1,2f00 card 0e11,8d89 rev 01 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 00 (II) PCI: 00:10:0: chip 10b9,5229 card 10b9,5229 rev c4 class 01,01,fa hdr 00 (II) PCI: 00:11:0: chip 10b9,7101 card 10b9,7101 rev 00 class 06,80,00 hdr 00 (II) PCI: 01:05:0: chip 1002,4336 card 0e11,00b0 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x9000 - 0x90ff (0x100) IX[B] [1] -1 0 0x9400 - 0x94ff (0x100) IX[B] [2] -1 0 0x9800 - 0x98ff (0x100) IX[B] [3] -1 0 0x9c00 - 0x9cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf410 - 0xf41f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf600 - 0xf7ff (0x200) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x4000 - 0x40ff (0x100) IX[B] [1] -1 0 0x4400 - 0x44ff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0x1000 - 0x103f (0x40) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xffbfd000 - 0xffbfdfff (0x1000) MX[B] (--) PCI:*(1:5:0) ATI Technologies Inc Radeon Mobility U1
[XFree86] fatal server error
What can I do when xserver writes me this fatal server error: could not open default font 'fixed' Please help me E-mail zdarma na cely zivot: http://email.seznam.cz ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error:
Sir, I have a PC running redhat 9. Now the PC is showing some error while booting through XFree86 sever. "Fatal server error: Unable to load required base modules, Exiting..." Here i am attaching the XFree86.0.log for ur refference and give me solution for this as soon as possible. Sheril K Jose. Yahoo! India Matrimony: Find your partner online. Post your profile. XFree86.0.log Description: XFree86.0.log
Re: [XFree86] Fatal server error:
This seems to be a common problem on RH 9. I don't think anyone knows why it happens yet. Somehow, some crucial XFree86 modules are missing. Reinstalling XFree86 is the only solution I know of. Mark. On Sat, 18 Oct 2003, [iso-8859-1] sheril jose wrote: Sir, I have a PC running redhat 9. Now the PC is showing some error while booting through XFree86 sever. Fatal server error: Unable to load required base modules, Exiting... Here i am attaching the XFree86.0.log for ur refference and give me solution for this as soon as possible. Sheril K Jose. Yahoo! India Matrimony: Find your partner online.Post your profile. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
I am getting a fatal server error while booting into Linux redhat 7.3. It gives me a Fatal server error: xf86MapPciMem: could not mmap PCI memory [base=0xe000,hostbase=0xe000,size=0] (invalid argument) I think there is also a problem reading my video display drivers, my laptop is a ibm x22. Please helpm me resolve this. Lin
[XFree86] Fatal server error
Dear friends: Following your instructions about fatal errors, I attach a log file showing a problem when I try to init my computer in windows mode with startx command. Please, could you help me? Thanks in advance. Tomás Mateo XFree86.0.log Description: Binary data
Re: [XFree86] Fatal server error
On Tue, 2003-09-09 at 05:02, Toms Mateo wrote: Dear friends: Following your instructions about fatal errors, I attach a log file showing a problem when I try to init my computer in windows mode with XFS isn't running.. http://www.europe.redhat.com/documentation/HOWTO/XDMCP/ts.php3 /etc/rc.d/init.d/xfs restart -lava startx command. Please, could you help me? Thanks in advance. Toms Mateo -- l8*, -lava peace, love, UNIX NOTE: When replying to a mailing list post, please be sure to reply to the /list/ and cc: or bcc: myself as I am unable to promise a timely response. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error .............
hi moiz if you are using i845 chipset if agp download from intel website in cmos active graphics is brookedale-g graphics chipn you will get good resoultion WW) Open APM failed (/dev/apm_bios) (No such file in cmos(bios of system) enable powermanagement (WW) Option XkbOptions requires an string value check xkb option(or) run in single usr mode /usr/X11/xf86config there you select n option of xkb option by muneesh From: Syed Moiz Ali [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [XFree86] Fatal server error . Date: Wed, 3 Sep 2003 09:10:26 -0700 (PDT) I am getting an error Fatal server error: no screens found When I try to run Mandarake Linux 9.0 in graphical mode Please help me in getting to know the solution for this problem. I went to xfree86.org website but was not able to identify which file to download... There is a lot of confusion as I am new to Linux. Thanking you in advance Moiz Log file : XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Sep 3 18:46:20 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 8086,2560 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 8086,4c59 rev 01 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,4c59 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 8086,4c59 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 8086,4c59 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 8086,4c59 rev 01 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 8086,0302 rev 01 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1057,5608 card 1057, rev 00 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared) (II) Bus 1
[XFree86] Fatal server error .............
I am getting an error Fatal server error: no screens found When I try to run Mandarake Linux 9.0 in graphical mode Please help me in getting to know the solution for this problem. I went to xfree86.org website but was not able to identify which file to download... There is a lot of confusion as I am new to Linux. Thanking you in advance Moiz Log file : XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Sep 3 18:46:20 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 8086,2560 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 8086,4c59 rev 01 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,4c59 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 8086,4c59 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 8086,4c59 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 8086,4c59 rev 01 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 8086,0302 rev 01 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1057,5608 card 1057, rev 00 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0xd000 - 0xd0ff (0x100) IX[B] [1] -1 0xd400 - 0xd4ff (0x100) IX[B] [2] -1 0xd800 - 0xd8ff (0x100) IX[B] [3] -1 0xdc00 - 0xdcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xff80 - 0xff8f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xe6a0 - 0xe6af (0x10) MX[B] (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory
[XFree86] Fatal Server Error: No Screens found
Hello, I am Installing Redhat Linux Version 9 on my E-machines M5310 laptop. Whenever I try to start X I get the following error message. Its an Athlon XP-M machine with an ATI Radeon IGP graphics card which auto detects in Redhat as ATI Mobility U1. Is there anyone who has experienced this problem or has a fix for this issue? XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Aug 4 14:04:25 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80012814, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab0 card , rev 13 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,700f card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:08:0: chip 10b9,5451 card 161f,2029 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:09:0: chip 10b9,5457 card 161f,2027 rev 00 class 07,03,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac41 card 4000, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:0a:1: chip 104c,8017 card 161f,2029 rev 02 class 0c,00,10 hdr 80 (II) PCI: 00:0c:0: chip 14e4,4320 card 144f,7050 rev 02 class 02,80,00 hdr 00 (II) PCI: 00:0d:0: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 80 (II) PCI: 00:0d:1: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 00 (II) PCI: 00:0d:2: chip 1033,00e0 card 161f,2029 rev 04 class 0c,03,20 hdr 00 (II) PCI: 00:0e:0: chip 14e4,4401 card 161f,2029 rev 01 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 10b9,5229 card 161f,2029 rev c4 class 01,01,fa hdr 00 (II) PCI: 00:11:0: chip 10b9,7101 card 161f,2029 rev 00 class 06,80,00 hdr 00 (II) PCI: 01:05:0: chip 1002,4336 card 161f,2029 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x9000 - 0x90ff (0x100) IX[B] [1] -1 0 0x9400 - 0x94ff (0x100) IX[B] [2] -1 0 0x9800 - 0x98ff (0x100) IX[B] [3] -1 0 0x9c00 - 0x9cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd010 - 0xd01f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe000 - 0xefff (0x1000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge:
[XFree86] Fatal Server Error: No Screens found
Hello, I am Installing Redhat Linux Version 9 on my E-machines M5310 laptop. Whenever I try to start X I get the following error message. Its an Athlon XP-M machine with an ATI Radeon IGP graphics card which auto detects in Redhat as ATI Mobility U1. Is there anyone who has experienced this problem or has a fix for this issue? XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Aug 4 14:04:25 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80012814, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab0 card , rev 13 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,700f card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:08:0: chip 10b9,5451 card 161f,2029 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:09:0: chip 10b9,5457 card 161f,2027 rev 00 class 07,03,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac41 card 4000, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:0a:1: chip 104c,8017 card 161f,2029 rev 02 class 0c,00,10 hdr 80 (II) PCI: 00:0c:0: chip 14e4,4320 card 144f,7050 rev 02 class 02,80,00 hdr 00 (II) PCI: 00:0d:0: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 80 (II) PCI: 00:0d:1: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 00 (II) PCI: 00:0d:2: chip 1033,00e0 card 161f,2029 rev 04 class 0c,03,20 hdr 00 (II) PCI: 00:0e:0: chip 14e4,4401 card 161f,2029 rev 01 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 10b9,5229 card 161f,2029 rev c4 class 01,01,fa hdr 00 (II) PCI: 00:11:0: chip 10b9,7101 card 161f,2029 rev 00 class 06,80,00 hdr 00 (II) PCI: 01:05:0: chip 1002,4336 card 161f,2029 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x9000 - 0x90ff (0x100) IX[B] [1] -1 0 0x9400 - 0x94ff (0x100) IX[B] [2] -1 0 0x9800 - 0x98ff (0x100) IX[B] [3] -1 0 0x9c00 - 0x9cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd010 - 0xd01f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe000 - 0xefff (0x1000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge:
Re: [XFree86] Fatal Server Error
On Thursday, July 17, 2003 8:52 am, Muench, Dennis wrote: I'm having problems establishing the log-in screen when start my computer. Enclosed, you will find the XFree86.0.log file. Any help will be appreciated. This question has been answered countless times throughout the eternal struggle that is XFree86. Look it up: http://marc.theaimsgroup.com/?l=xfree86w=2r=1s=%22could+not+open+default+font+%27fixed%27%22q=b 977 hits this year alone... -- Andy Goth | [EMAIL PROTECTED] | http://ioioio.net/ Engineers love to change things. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
To Whom It May Concern: Im having problems establishing the log-in screen when start my computer. Enclosed, you will find the XFree86.0.log file. Any help will be appreciated. Thanks, Dennis Muench XFree86.0.log Description: XFree86.0.log
[XFree86] Fatal server error: no screens found
Hi! Big trouble. I can't load it at all. I couldn't load it in the original release with redhat either, but then i read in some forum about people with Radeon cards that mad it work with you newest release. This however didn't work for me. Hope you can help! - Hampus XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 15 03:34:53 2003 (++) Using config file: "/root/XF86Config.new" (==) ServerLayout "XFree86 Configured" (**) |--Screen "Screen0" (0) (**) | |--Monitor "Monitor0" (**) | |--Device "Card0" (**) |--Input Device "Mouse0" (**) |--Input Device "Keyboard0" (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/CID/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/CID/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 1028,0142 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2561 card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24c2 card 1028,0142 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1028,0142 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1028,0142 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1028,0142 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 1028,0142 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1028,0142 rev 01 class 0c,05,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4e45 card 1002,3002 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4e65 card 1002,3003 rev 00 class 03,80,00 hdr 00 (II) PCI: 02:00:0: chip 104c,8020 card 1028,8010 rev 00 class 0c,00,10 hdr 00 (II) PCI: 02:01:0: chip 14f1,2016 card 13e0,021a rev 01 class 07,80,00 hdr 00 (II) PCI: 02:02:0: chip 1102,0006 card 1102,1003 rev 00 class 04,01,00 hdr 80 (II) PCI: 02:02:1: chip 1102,7004 card 1102,1003 rev 00 class 09,80,00 hdr 80 (II) PCI: 02:08:0: chip 8086,1039 card 1028,0142 rev 81 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xe000 - 0xe0ff (0x100) IX[B] [1] -1 0 0xe400 - 0xe4ff (0x100) IX[B] [2] -1 0 0xe800 - 0xe8ff (0x100) IX[B] [3] -1 0 0xec00 - 0xecff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xff80 - 0xff9f (0x20) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe800 - 0xf7ff (0x1000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared) (II)
[XFree86] Fatal Server error: no screens found...
Hey Everybody, So I'm taking a Linux class right now, but unfortunately, it doesn't continue until next week, hence the question I pose to you today. Please keep in mind, this might be a stupid newbie question... I have installed Redhat Linux 8.0 on my Compaq Presario 1200 laptop. I installed everything because we are learning how to use all features of Linux for class. Anyways, during the end of the installation, I don't believe they detected my screen or video card, which I have no clue what it is. After the installation, i type startx in root, and it spits this out... --- (==) Log file: /var/log/XFree86.0.log, Time: Tue Jul 8 11:32:39 2003 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal Server error: no screens found When reporting a problem. XIO: fatal error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 events remaining can someone tell me what to do? I don't even know how to get back to the screen which you can change the monitor settings. please keep in mind I have no Linux related exprience at all, so if you could do me a favor and tell me exactly what to type, i'd really appreciate it. like exactly what to type. Thank you in advance...and if someone has some great sites to check out for newbies, i'd really appreciate it. Thanks ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
Hello XFree86 Team I had a problem configuring my Laptop ACER 350C. It's a little old, but i want to install Linux 7.0 in it. Attached i send you the log file, it's says something related with "can't open module v41" Thanks for your advice. Boris Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! XFree86 Version 4.0.1a / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 2 August 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.5-22smp i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Sun Jul 6 11:17:38 2003 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor My Monitor (**) | |--Device My Video Card (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbLayout us (**) XKB: layout: us (**) FontPath set to unix/:7100 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.2 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.1 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.0.1a, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.1 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.0.1a, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (II) PCI: Probing config type using method 1 (II) PCI: Standard check for type 1 failed. (II) PCI: stages = 0x00, oldVal1 = 0x, mode1Res1 = 0x, mode1Res2 = 0x (II) PCI: No PCI bus found (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x01ff (0x200) IX[B]E (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x01ff (0x200) IX[B]E (II) All system resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x01ff (0x200) IX[B]E (II) LoadModule: GLcore (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor=The XFree86 Project compiled for 4.0.1a, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: dbe (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor=The XFree86 Project compiled for 4.0.1a, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: dri (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor=The XFree86 Project compiled for 4.0.1a, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) Loading sub module drm (II) LoadModule: drm (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor=The XFree86 Project compiled for 4.0.1a, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: extmod (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor=The XFree86 Project compiled for 4.0.1a, module version = 1.0.0 Module class: XFree86 Server Extension ABI class:
[XFree86] Fatal server error: no screens found
I'm trying to build an intra Net with LTSP in a school (La Paz - Bolivia) 1 Server PIII 1.2 GH, Linux Mandrake 8.1, RAM 512 MB, HD 40 GB. 18 LessDisk terminals (BootDisk) 486, PI and PII NET Topology = BUS Coaxial I'm almost ready with this NET. but when a terminal is trying to get into SFree (graphical plataform) it shows the message: Fatal server error: no screens found The file /var/log/XFree86.0.log is bellow: XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.8-5mdkenterprise i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Mon Jun 9 14:33:22 2003 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor Generic|SVGA alta-frecuencia, 1024x768 a 70 Hz (**) | |--Device SiS 300 (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 250 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout es (**) XKB: layout: es (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:-1 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80003888, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card 1458,5000 rev c4 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0686 card 1458,5001 rev 40 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 1458,5002 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 1458,5004 rev 1a class 0c,03,00 hdr 00 (II) PCI: 00:07:4: chip 1106,3057 card 1458,5003 rev 40 class 0c,05,00 hdr 00 (II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0d:0: chip 10ec,8029 card , rev 00 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1039,0300 card 1039,0300 rev 90 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0x8000 - 0xafff (0x3000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xdfe0 - 0xdfef (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xcfc0 - 0xdfcf (0x1010) MX[B] (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) SiS 300 rev 144, Mem @ 0xd000/27, 0xdfee/17, I/O @ 0xa000/7, BIOS @ 0xdfed/16 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1
RE: RE: [XFree86] Fatal Server Error in X Server
The link still works it just gets cut by the list software. Just add the -tml back to the end of the line. http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/ref-guide/s1-x-fonts.h tml You don't need to add those lines to your config file. However if you do, this particular problem won't repeat. The link explains more about what you just did to fix that problem if you're interested in learning about it. Good Luck, cyn -Original Message- From: Rohit Khanna [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 25, 2003 5:13 PM To: [EMAIL PROTECTED] Cc: Cynthia Grossen Subject: Re: RE: [XFree86] Fatal Server Error in X Server ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error in X Server
Saluta List, I am running Red Hat 9 with rebooted my machine and my XServer is not starting now(XFree86 Version 4.3.0 (Red Hat Linux Release 4.3.0-2)) I observed the /var/log/XFree86.0.log file very carefully, the only important thing I observed is: Fatal Server Error: could not open default font 'fixed' One idea I have is to remove all XFree86 Packages reinstalling them from the CD by first trying the font packages individually. Can someone suggest something else.? Well, I am a naughty boy, was trying to run one X Server over the Other and it happened. I did not realize that when I will reboot, I will face problems. That Machine is not on Internet, neither do I have any floppy or something so cannot send the complete /var/log/Xfree86.0.log file Any Help will be appreciated, Sincerely Rohit ___ Get www. mycompany .com and 5 matching email ids. Just Rs. 1499/ year. Click here http://www.rediffmailpro.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal Server Error in X Server
Your font server has failed. Here is a link to Red Hat documentation about the font server XFS http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/ref-guide/s1-x-fonts.h tml Service xfs restart may work, you'll have to be running as root and X should not be running. The latter shouldn't be a problem. :) I'm not a Red Hat user so maybe someone else can help you if you have more questions. Your second choice is to add the font directories to your config file. This is the preferred solution. Add the following lines to the Section Files in the XF86Config file: FontPath /usr/X11R6/lib/X11/fonts/misc:unscaled FontPath /usr/X11R6/lib/X11/fonts/75dpi:unscaled FontPath /usr/X11R6/lib/X11/fonts/100dpi:unscaled FontPath /usr/X11R6/lib/X11/fonts/Type1 FontPath /usr/X11R6/lib/X11/fonts/Speedo HTH, cyn -Original Message- From: Rohit Khanna [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 25, 2003 4:43 PM To: [EMAIL PROTECTED] Subject: [XFree86] Fatal Server Error in X Server ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error
Hi I have the following error message when trying to open default font 'fixed' Error loading keymap/var/tmp/server-0.xkm Couldn't loadXKM keymap,falling back to pre-XKM keymap Couldn't init font path element unix/:7100,removing from list! So what could the problem be? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal server error: no screens found
The error message is telling you that you either didn't configure X after installation or the config file isn't located anywhere that X knows of. (Generally in /etc/X11/XF86Config, but not always--for windows especially.) You can configure X in a number of different ways, XFree86 -configure is probably the easiest. XFree86 -configure When this option is specified, the X server loads all video driver modules, probes for available hardware, and writes out an initial XF86Config(5) file based on what was detected. This option currently has some problems on some platforms, but in most cases it is a good way to bootstrap the configuration process. This option is only available when the server is run as root (i.e., with real-uid 0). http://www.xfree86.org/4.3.0/XFree86.1.html You may also need to use XF86cfg or XF86config. Read their manpages by following the links in the above link. HTH, cyn -Original Message- From: Gregory Wolfson [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 03, 2003 9:32 PM To: [EMAIL PROTECTED] Subject: [XFree86] Fatal server error: no screens found ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found
Hi. I am trying to run XFree86 on RedHat 9.0 using Virtual PC 5.2 for Windows, but whenever I try to startx, I get the message below. How do I configure XFree86 to recognize the VPC terminal? Thanks in advance. Greg [EMAIL PROTECTED] root]# more /var/log/XFree86.0.log XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc versi n 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Jun 3 21:15:22 2003 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error: failed to initialize core devices
I am having mega problemswith my machine. Please help me. I sent you the full file, but the EE and WW errors are at the end. I am running RedHat 8.0 with KDE, problem started with up2date March 23 or 24, 2003. Thank you XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-27.8.0 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Mar 14 06:45:49 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Mar 26 09:34:10 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device NVIDIA GeForce 4 (generic) (**) |--Input Device Mouse0 (**) |--Input Device Mouse1 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8060, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card , rev c4 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0686 card 1106, rev 40 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card , rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00 (II) PCI: 00:07:4: chip 1106,3057 card 1106,3057 rev 40 class 06,00,00 hdr 00 (II) PCI: 00:07:5: chip 1106,3058 card 1106,3058 rev 50 class 04,01,00 hdr 00 (II) PCI: 00:0f:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0172 card , rev a3 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xdc00 - 0xddff (0x200) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xd000 - 0xd7ff (0x800) MX[B] (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:4), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus -1 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus -1 prefetchable memory range: [0] -1
Re: [XFree86] Fatal Server Error: failed to initialize core devices
(**) Option Device /dev/inportbm (EE) xf86OpenSerial: Cannot open device /dev/inportbm No such device. (EE) Mouse0: cannot open input device (EE) PreInit failed for input device Mouse0 Your device file for your mouse appears to be wrong. I'm not sure what inportbm is. /dev/psaux or /dev/mouse are far more common. That's setup in the XF86Config (XF86Config-4) in the Section InputDevice. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error: no screens found
Hi, I have a problem that I can not fix. After startx I get the message fatal server error: no screens found. I think it is the video card, I found a help request of someone else that has the same problem as I have and he has the same video chip (http://forum.mlug.org.au/bbshowpost.php?bbsubject_id=177) My system is a pentium 166 mmx, and my video card is: vendor: sparkle (?) chip set: S3 Trio64V2/DX I use linux: 2.4.18-14 distribution: red hat 8.0, (7.3 gives the same problem) (See attached file: XF86Config.txt)(See attached file: XFree86.0.log) Do you know a work around for this? After serveral evenings I currently has given up trying and now think about bying a different video card. Joost ter Laak XF86Config.txt Description: Binary data XFree86.0.log Description: Binary data
[XFree86] Fatal server error
The attached log file shows the error I now get when trying to start the x-server. This started to occur after I ran up2date to update the kernal and some of the kde features. The file up2date.log is the relevant portion of the up2date log which shows exactly which packages I downloaded and installed. The server error started as soon as I rebooted my system after the update. What do I do to fix this error? Regards, Del Ferry XFree86.0.log Description: Binary data up2date.log Description: Binary data
[XFree86] Fatal server error
I am running Red Hat Linux 8.0 on a Gateway E-1400 machine. Today the desktop no longer comes up after logging in (which is graphical). The error message I am getting is: _XSERVTransSocketINETCreateListener:...SocketCreateListener() failed _XSERVTransMakeAllCOTSServerListeners:server already running Fatal server error: Cannot establish any listening sockets - Make sure X server isn't already running
[XFree86] Fatal server error
Hi, I've bought a new hard disk recently; and tried making a clean install of SuSE 8.1. I've had a problem with my screen configuration. Suse installation determined these: Monitor - vesa [EMAIL PROTECTED] Graphics Chipset - Intel 82810E CGC So the chipset is ok; but my monitor is IBM E74; which doesn't exist in sax2 monitor db. I clicked change and modified the monitor config to replace it with ibm e74; using the manufacturer floppy. Then i clicked test after finalize; but sax2 gave me the following errors : (WW) Open APM failed (/dev/apm_bios) (no such device) (WW) I810(0): Config file hsync range 28-64 kHz not within DDC hsync range 30-69 kHz So i gave up decided not to change monitor type. I left what suse determined. Installation finished; and x-server didn't start. I logged in typed startx; which gave me the following errors: (EE)GARTInit : AGPIOC_INFO failed (Invalid argument) (EE)I810(0): AGPGART support is not available. Make sure your kernel has... (EE)Screen(s) found, but none have a usable configuration Fatal server error: no screens found. Any help?
[XFree86] Fatal server error
sir/madam, i got this error(the full server output is in the attached file)and now i cant start linux in gui mode. pls advise. sachin __ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ XFree86.0.log Description: XFree86.0.log
[XFree86] Fatal Server Error
I am running Vector distribution and I am getting the following error. Could not init font path element unix:/7100, removing from list! Fatal Server Error: could not open default font 'fixed' I tried the resolution that another post had suggested but did not work, here is that fix. chmod a+r /usr/X11R6/lib/X11/fonts/misc/fonts.alias service xfs restart The first line goes through no problem, but when I attempt the service xfs restart I get: /sbin/service: line 81: /etc/rc.d/init.d/xfs: No such file or directory. When I reboot the machine and try startx I get the same error. Anyone have any suggestions. Thanks Geoff Hixon ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error
Is the file there? Are the pemissions OK? David - Original Message - From: Hixon, Geoff [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, February 12, 2003 8:50 AM Subject: [XFree86] Fatal Server Error I am running Vector distribution and I am getting the following error. Could not init font path element unix:/7100, removing from list! Fatal Server Error: could not open default font 'fixed' I tried the resolution that another post had suggested but did not work, here is that fix. chmod a+r /usr/X11R6/lib/X11/fonts/misc/fonts.alias service xfs restart The first line goes through no problem, but when I attempt the service xfs restart I get: /sbin/service: line 81: /etc/rc.d/init.d/xfs: No such file or directory. When I reboot the machine and try startx I get the same error. Anyone have any suggestions. Thanks Geoff Hixon ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal Server Error
the bit about could not open default font 'fixed' was explained in depth here. Sent: Tuesday, February 04, 2003 5:30 AM Subject: Re: [XFree86] Error Starting X You can use Google to search the site, just go to the Advanced Search Options and set the Domain Option (in the first block of options towards the bottom) to only search http://www.xfree86.org/. Use the subject line as your search term, enclose it in quotes. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error:
Hello, I am installing Red Hat 8.0 for the first time on hdb, on a system with a Windows ME on hda (dual boot). I get a Fatal server error: no screen found message. I have a Diamond Stealth 64 series display card(if that is the problem). I can access the text login, but I can't get X server working (is that the GUI?). Please help, I am just starting out with Linux and Red Hat in particular. I don't even know how to copy the file /var/log/XFree86.0.log to a floppy so I can attach the error log in this email (I'm using another PC). I'd appreciate any light to this. Thank you, Richard Y. _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error:
Richard Yague schrieb: Hello, I am installing Red Hat 8.0 for the first time [...] I can access the text login, but I can't get X server working (is that the GUI?). Yes, basically. You still need some more stuff, e.g. a window manager. KDE or GNOME will start one. I don't even know how to copy the file /var/log/XFree86.0.log to a floppy so I can attach the error log in this email [...] ' man mtools ' or ' info mtools ' will give you some valuable information. Put a DOS-formatted floppy into the drive. If ' mdir a: ' doesn't result an error message, simply ' mcopy /var/log/XFree86.0.log a: '. wij ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error
Hello, I am new to Linux and Redhat. I am trying to install Redhat Linux on hdb for the first time (hda on Windows ME), but I can't get to the GUI display (after about 5 reinstalls)I don't know how to copy the /var/log/XFree86.0.log to floppy so I could have attached the error log here (I'm using another PC for this email), there is Fatal server error: no screens found message on the bottom of the log file. Also a message appears in the last few lines of the file: X10: fatall 10 error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 events remaining. I have a Diamond Stealth 64 series display card (if this is the one that's causing the problem). I'd appreciate any help. Thank you, Richard Y. __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error: no screen found
A few more details would be helpful (monitor, graphic card, full XF86Config, full log) However , from the parsing error and the fact that you are not using the standard /etc/X11/XF86Config resp. /etc/X11/XF86Config-4 (which would be the RH 7.x version for X 4.x.x) I wonder whether you are not using an XF86Config which has a X 3.3.6 format rather than the different format for X 4.x.x (Check whether your config file has a Keyboard and pointer section * version 3.3.6* rather than two input device sections *version X 4.x.x*) Lionel --- l [EMAIL PROTECTED] wrote: an unexpected crash happen in Redhat 7.3, KDE 3. Attached is hte /var/log/XFree86.9.log thanks laurence XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.9.log, Time: Tue Jul 23 16:23:01 2002 (++) Using config file: /tmp/xf86config-TLeCvM Parse warning on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM Ignoring obsolete keyword LeftAlt. Parse error on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM Meta is not a valid keyword in this section. (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.9.log. Please report problems to [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error: no screen found
an unexpected crash happen in Redhat 7.3, KDE 3. Attached is hte /var/log/XFree86.9.log thanks laurence XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.9.log, Time: Tue Jul 23 16:23:01 2002 (++) Using config file: /tmp/xf86config-TLeCvM Parse warning on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM Ignoring obsolete keyword LeftAlt. Parse error on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM Meta is not a valid keyword in this section. (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.9.log. Please report problems to [EMAIL PROTECTED]
[XFree86] Fatal server error
Title: Message Sir/Madam Please find the log file attached, regarding the error which I encountered during the boot sequence. Kindly send me the details for resolving the same. Regards Tarun Jain. XFree86.0.doc Description: MS-Word document
RE: [XFree86] Fatal Server Error
Title: RE: [XFree86] Fatal Server Error check xfs running check access rights to font paths -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 15, 2003 07:53 To: [EMAIL PROTECTED] Subject: [XFree86] Fatal Server Error (See attached file: XFree86.0.log) when starting the X server there is a fatal server error message and the X server crashes the error reads a follows: Fatal Server error: could not open default font 'fixed' Do let me know the solution for this problem. Looking forward for your reply Please find the XFree86.0.log file. Regards, Nikhil.T
[XFree86] Fatal server error: no screens found
Okay, I'm a newbie - so this one should be simple? I'm running QNX v6.2, I've downloaded and installed the XFree86 for QNX. When I run startx, I get the following: XFree86 Version 4.2.0 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 11 March 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: QNX6/Neutrino QNX Software Systems Ltd. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Jan 13 16:49:56 2003 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] Thanks for your help. Jim ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86