[XFree86] Fatal Server Error
(See attached file: XFree86.0.log) when starting the X server there is a fatal server error message and the X server crashes the error reads a follows: Fatal Server error: could not open default font 'fixed' Do let me know the solution for this problem. Looking forward for your reply Please find the XFree86.0.log file. Regards, Nikhil.T XFree86.0.log Description: Binary data
[XFree86] Fatal server error
Hi there I got Athlon 1800 XP, Gygabyte GA-7VA, GForce 440. After fresh instalation: Failed to open /dev/io for extended I/O ... whole log inside mail before :) For more infoz plz mail and help me :) Peter Hudak ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error
Title: Message Sir/Madam Please find the log file attached, regarding the error which I encountered during the boot sequence. Kindly send me the details for resolving the same. Regards Tarun Jain. XFree86.0.doc Description: MS-Word document
[XFree86] Fatal server error:
Hello, I am installing Red Hat 8.0 for the first time on hdb, on a system with a Windows ME on hda (dual boot). I get a "Fatal server error: no screen found" message. I have a Diamond Stealth 64 series display card(if that is the problem). I can access the text login, but I can't get X server working (is that the GUI?). Please help, I am just starting out with Linux and Red Hat in particular. I don't even know how to copy the file /var/log/XFree86.0.log to a floppy so I can attach the error log in this email (I'm using another PC). I'd appreciate any light to this. Thank you, Richard Y. _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error
Hello, I am new to Linux and Redhat. I am trying to install Redhat Linux on hdb for the first time (hda on Windows ME), but I can't get to the GUI display (after about 5 reinstalls)I don't know how to copy the /var/log/XFree86.0.log to floppy so I could have attached the error log here (I'm using another PC for this email), there is "Fatal server error: no screens found" message on the bottom of the log file. Also a message appears in the last few lines of the file: X10: fatall 10 error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. I have a Diamond Stealth 64 series display card (if this is the one that's causing the problem). I'd appreciate any help. Thank you, Richard Y. __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
I am running Vector distribution and I am getting the following error. Could not init font path element unix:/7100, removing from list! Fatal Server Error: could not open default font 'fixed' I tried the resolution that another post had suggested but did not work, here is that fix. chmod a+r /usr/X11R6/lib/X11/fonts/misc/fonts.alias service xfs restart The first line goes through no problem, but when I attempt the service xfs restart I get: /sbin/service: line 81: /etc/rc.d/init.d/xfs: No such file or directory. When I reboot the machine and try startx I get the same error. Anyone have any suggestions. Thanks Geoff Hixon ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error
sir/madam, i got this error(the full server output is in the attached file)and now i cant start linux in gui mode. pls advise. sachin __ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ XFree86.0.log Description: XFree86.0.log
[XFree86] Fatal server error
Hi, I've bought a new hard disk recently; and tried making a clean install of SuSE 8.1. I've had a problem with my screen configuration. Suse installation determined these: Monitor - vesa [EMAIL PROTECTED] Graphics Chipset - Intel 82810E CGC So the chipset is ok; but my monitor is IBM E74; which doesn't exist in sax2 monitor db. I clicked change and modified the monitor config to replace it with ibm e74; using the manufacturer floppy. Then i clicked test after finalize; but sax2 gave me the following errors : (WW) Open APM failed (/dev/apm_bios) (no such device) (WW) I810(0): Config file hsync range 28-64 kHz not within DDC hsync range 30-69 kHz So i gave up & decided not to change monitor type. I left what suse determined. Installation finished; and x-server didn't start. I logged in & typed startx; which gave me the following errors: (EE)GARTInit : AGPIOC_INFO failed (Invalid argument) (EE)I810(0): AGPGART support is not available. Make sure your kernel has... (EE)Screen(s) found, but none have a usable configuration Fatal server error: no screens found. Any help?
[XFree86] Fatal server error
I am running Red Hat Linux 8.0 on a Gateway E-1400 machine. Today the desktop no longer comes up after logging in (which is graphical). The error message I am getting is: _XSERVTransSocketINETCreateListener:...SocketCreateListener() failed _XSERVTransMakeAllCOTSServerListeners:server already running Fatal server error: Cannot establish any listening sockets - Make sure X server isn't already running
[XFree86] Fatal server error
The attached log file shows the error I now get when trying to start the x-server. This started to occur after I ran "up2date" to update the kernal and some of the kde features. The file "up2date.log" is the relevant portion of the up2date log which shows exactly which packages I downloaded and installed. The server error started as soon as I rebooted my system after the update. What do I do to fix this error? Regards, Del Ferry XFree86.0.log Description: Binary data up2date.log Description: Binary data
[XFree86] fatal server error
Hi I have the following error message when trying to open default font 'fixed' "Error loading keymap/var/tmp/server-0.xkm" Couldn't loadXKM keymap,falling back to pre-XKM keymap Couldn't init font path element unix/:7100,removing from list! So what could the problem be? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
Hello XFree86 Team I had a problem configuring my Laptop ACER 350C. It's a little old, but i want to install Linux 7.0 in it. Attached i send you the log file, it's says something related with "can't open module v41" Thanks for your advice. Boris Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! XFree86 Version 4.0.1a / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 2 August 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.5-22smp i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jul 6 11:17:38 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "My Video Card" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.2 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.1 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.1a, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.1 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.1a, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (II) PCI: Probing config type using method 1 (II) PCI: Standard check for type 1 failed. (II) PCI: stages = 0x00, oldVal1 = 0x, mode1Res1 = 0x, mode1Res2 = 0x (II) PCI: No PCI bus found (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x01ff (0x200) IX[B]E (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x01ff (0x200) IX[B]E (II) All system resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x01ff (0x200) IX[B]E (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.0.1a, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.1a, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.0.1a, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.0.1a, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.1a, module version = 1.0.0
[XFree86] Fatal Server Error
To Whom It May Concern: I’m having problems establishing the log-in screen when start my computer. Enclosed, you will find the XFree86.0.log file. Any help will be appreciated. Thanks, Dennis Muench XFree86.0.log Description: XFree86.0.log
[XFree86] Fatal server error .............
I am getting an error Fatal server error: no screens found When I try to run Mandarake Linux 9.0 in graphical mode Please help me in getting to know the solution for this problem. I went to xfree86.org website but was not able to identify which file to download... There is a lot of confusion as I am new to Linux. Thanking you in advance Moiz Log file : XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 3 18:46:20 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (WW) Option "XkbOptions" requires an string value (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse1" (**) FontPath set to "unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 8086,2560 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 8086,4c59 rev 01 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,4c59 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 8086,4c59 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 8086,4c59 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 8086,4c59 rev 01 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 8086,0302 rev 01 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1057,5608 card 1057, rev 00 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0xd000 - 0xd0ff (0x100) IX[B] [1] -1 0xd400 - 0xd4ff (0x100) IX[B] [2] -1 0xd800 - 0xd8ff (0x100) IX[B] [3] -1 0xdc00 - 0xdcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xff80 - 0xff8f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xe6a0 - 0xe6af (0x10) MX[B] (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetch
[XFree86] Fatal server error
Dear friends: Following your instructions about fatal errors, I attach a log file showing a problem when I try to init my computer in windows mode with "startx" command. Please, could you help me? Thanks in advance. Tomás Mateo XFree86.0.log Description: Binary data
[XFree86] Fatal Server Error
I am getting a fatal server error while booting into Linux redhat 7.3. It gives me a Fatal server error: xf86MapPciMem: could not mmap PCI memory [base=0xe000,hostbase=0xe000,size=0] (invalid argument) I think there is also a problem reading my video display drivers, my laptop is a ibm x22. Please helpm me resolve this. Lin
[XFree86] Fatal Server Error
I am getting a strange error that says "Cannot move old logfile "/var/log/XFree86.0.log.old" This happens when trying to log on as a user. root is ok. I am running a Dell 2650 Server Dual 3.02 Ghz proc 4GB RAM, Mandrake 9.1. If anyone can help please let me know. Thanx, Douglas Pike
[XFree86] Fatal server error:
Sir, I have a PC running redhat 9. Now the PC is showing some error while booting through XFree86 sever. "Fatal server error: Unable to load required base modules, Exiting..." Here i am attaching the XFree86.0.log for ur refference and give me solution for this as soon as possible. Sheril K Jose. Yahoo! India Matrimony: Find your partner online. Post your profile. XFree86.0.log Description: XFree86.0.log
[XFree86] fatal server error
What can I do when xserver writes me this fatal server error: could not open default font 'fixed' Please help me E-mail zdarma na cely zivot: http://email.seznam.cz ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error
Hi, find in the attach the log file related to my Xserver crash What should I do ? -- _ Cesar Fernandez Phone: 34-973-702738 University of LleidaFAX: 34-973-702702 Computer Science Department e_mail: [EMAIL PROTECTED] C./ Jaume II, 69URL: http://fermat.eup.udl.es/~cesar 25001 Lleida SPAIN __ XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.22 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Sun Nov 16 21:00:30 CET 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 17 11:46:38 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "es" (**) XKB: layout: "es" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80f0, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0605 card 103c,0020 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8605 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 1524,1410 card 4000, rev 00 class 06,07,00 hdr 02 (II) PCI: 00:0d:0: chip 10ec,8139 card 103c,0020 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0e:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr 00 (II) PCI: 00:10:0: chip 125d,2838 card 103c,0020 rev 01 class 07,80,00 hdr 00 (II) PCI: 00:11:0: chip 1106,8231 card 103c,0020 rev 10 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 103c,0020 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1e class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1e class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,8235 card 103c,0020 rev 10 class 06,80,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3058 card 103c,0020 rev 40 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8d01 card 103c,0020 rev 02 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xdfff (0x2000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe000 - 0xefff (0x1000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x9000 - 0x9fff (0x1000) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (0:4:0), (0,2,5), BCTRL: 0x0540 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x4000 - 0x40ff (0x10
[XFree86] Fatal server error:
Je veux démarrer mon X Server, mais j'ai cette erreur. Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership? When reporting a problem related to a server crash, please sendthe full server output, not just the last messages.Please report problems to [EMAIL PROTECTED]. Xlib: connection to ":0.0" refused by serverXlib: Invalid MIT-MAGIC-COOKIE-1 keygiving up.xinit: unable to connect to X serverxinit: No such process (errno 3): Server error.Couldnt get a file descriptor referring to the console[EMAIL PROTECTED] vincent]$ Quelqu'un peut-il m'aider ? Vincent KOUAKOU [EMAIL PROTECTED] [EMAIL PROTECTED] Tel : +22521239089 Cel : +22507059164 Fax : +22521239099
[XFree86] Fatal Server Error
Hello there Running RH9 X Server won't come up..message I get is Fatal Server Error Could nor topen default font 'fixed' Could you advise a fix?? Kindest regards Imran.javeed ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server error
Fatal Server Error Slackware 9.1 Kernel 2.6.3 xfree86 4.3.0 Any idea please? - Thanks a lot in advance - Mauro (Italy) - XFree86 Version 4.3.0Release Date: 27 February 2003X Protocol Version 11, Revision 0, Release 6.6Build Operating System: Linux 2.4.22 i686 [ELF]Build Date: 16 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version.Module Loader presentMarkers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 3 15:57:05 2004(==) Using config file: "/etc/X11/XF86Config"(==) ServerLayout "Simple Layout"(**) |-->Screen "Screen 1" (0)(**) | |-->Monitor "My Monitor"(**) | |-->Device "at3d"(**) |-->Input Device "Mouse1"(**) |-->Input Device "Keyboard1"(==) Keyboard: CustomKeycode disabled(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/l$(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"(==) ModulePath set to "/usr/X11R6/lib/modules"(--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device)(II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4(II) Loader running on linux(II) LoadModule: "bitmap"(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a(II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4(II) Loading font Bitmap(II) LoadModule: "pcidata"(II) Loading /usr/X11R6/lib/modules/libpcidata.a(II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6(II) PCI: Probing config type using method 1(II) PCI: Config type is 1(II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000(II) PCI: PCI scan (all values are in hex)(II) PCI: 00:00:0: chip 8086,7180 card , rev 03 class 06,00,00 hdr 00(II) PCI: 00:01:0: chip 8086,7181 card , rev 03 class 06,04,00 hdr 01(II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80(II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80(II) PCI: 00:04:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00(II) PCI: 00:04:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00(II) PCI: 00:04:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00(II) PCI: 00:09:0: chip 1142,643d card , rev 02 class 03,00,00 hdr 00(II) PCI: 00:0a:0: chip 1274,1371 card 1274,1371 rev 08 class 04,01,00 hdr 00(II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00(II) PCI: End of PCI scan(II) Host-to-PCI bridge:(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)(II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B](II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) PCI-to-PCI bridge:(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0003 (VGA_EN is cleared)(II) Bus 1 I/O range: [0] -1 0 0xb000 - 0xbfff (0x1000) IX[B](II) Bus 1 non-prefetchable memory range: [0] -1 0 0xede0 - 0xedef (0x10) MX[B](II) Bus 1 prefetchable memory range: [0] -1 0 0xe5c0 - 0xe5cf (0x10) MX[B](II) PCI-to-ISA bridge:(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)(--) PCI:*(0:9:0) Alliance Semiconductor Corporation ProMotion AT3D rev 2, Mem @ 0xef00/24, I$(II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B](II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B](II) PCI Memory resource overlap reduced 0xe800 from 0xebff to 0xe7ff(II) Active PCI resource ranges: [0] -1 0 0xeefeff00 - 0xeefe (0x100) MX[B] [1] -1 0 0xe800 - 0xe7
[XFree86] fatal server error:
could not open default font when reporting a problem related to a server crash, please send the full server output, not just the last message. XIO: fatal IO error 104(Connection reset by peer) on X server ":0.0" after 0 request (0 known processed) with 0 events remaining. please try helpme to resolve this problem. mi email is [EMAIL PROTECTED], send me a solution for this problem please. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
Hello I am using mandrake linux 9.2 operating system and is my mail server. When I restart the system to change hardware (mouse) it start at the console. I login as root and entered my root password. When I attempt to swith to graphical user interface (ie kde) it report the following error fatal server error could not open default font 'fixed' XIOl : fatal IO error 104 (Connection reset by peer) on X server ":0.0" after zero requests (0 known processed) with 0 events remaining. Yours Maiyama kabir Do you Yahoo!?Yahoo! Domains - Claim yours for only $14.70/year
[XFree86] Fatal server error
xfree86，您好！ -bash-2.05b$ xinit Fatal server error: PAM authentication failed, cannot start X server. Perhaps you do not have console ownership? When reporting a problem related to a server crash, please send the full server output, not just the last messages. Please report problems to [EMAIL PROTECTED] 致 礼！ 彭肇 [EMAIL PROTECTED] 2004-06-02 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error
Sir, I am reporting a problem related to installing xfree86 in one of my freebsd machines. I am attaching the log file for your referrence. Many thanks, -Ariel XFree86.0.log Description: Binary data
[XFree86] Fatal server error
Error "fatal server error" running XFree86 3.3.6 on my Debian 3.0 using a Cirrus Logic card with 800x600x256 mode. If i run whith 640x480x256 configuration mode all work fine. Extract of XF86config: ection "Device" Identifier "Cirrus" VendorName "CirrusLogic" BoardName "GD5420" #VideoRam512 # Device section for Cirrus Logic GD5420/2/4/6/8/9-based cards. #MemBase 0x00e0 #MemBase 0x04e0 #Option "linear" # Use Option "no_bitblt" if you have graphics problems. If that fails # try Option "noaccel". # Refer to /usr/X11R6/lib/doc/README.cirrus. # To allow linear addressing, uncomment the Option line and the # address that the card maps the framebuffer to. #Clocks 25.23 28.32 0.00 0.00 31.50 EndSection # ** # Screen sections # ** # The Colour SVGA server Section "Screen" Driver "svga" # Use Device "Generic VGA" for Standard VGA 320x200x256 #Device "Generic VGA" Device "Cirrus" Monitor "Compaq" Subsection "Display" Depth 8 # Omit the Modes line for the "Generic VGA" device Modes "800x600" (IF I PUT HERE 640X480 THE XSERVER RUN WELL) ViewPort0 0 # Use Virtual 320 200 for Generic VGA EndSubsection XSERVER LOG : X: unable to open wrapper config file /etc/X11/Xwrapper.config XFree86 Version 3.3.6a / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.4.13 i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): (using VT number 7) XF86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us_intl)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3 (**) SVGA: Graphics device ID: "Cirrus" (**) SVGA: Monitor ID: "Compaq" (--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:un scaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Spe edo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11 R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/" (--) SVGA: chipset: clgd5420 (--) SVGA: videoram: 512k (--) SVGA: clocks: 25.23 28.32 0.00 0.00 31.50 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 34.167 MHz (--) SVGA: There is no defined dot-clock matching mode "800x600" Fatal server error: No valid modes found. Could help me anyone?? RGDS ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error
Hi everyone, I've been trying to to solve this for a couple of days now. I've read all the documentation I could find, with no changes. I've installed all the autodection packages to see if my variables were wrong. I've installed XFree86 manually (not using apt-get x-window-system). The system is debian with kernel 2.2.20-idepci on a i686. The video card is a Riva tnt2, which should be compatible with the 'nv' driver. Then monitor is an emachines eview17 I've got the right specs for it. Keyboard and mouse are standard us layout logitech cordless combo. I've attached the comfig file and the log file. If anyone could help me out I'd really appreciate it. Thanks Erik XF86Config-4 Description: Binary data XFree86.0.log Description: Binary data
[XFree86] Fatal Server Error!!
Hi !! This message was displayed when mi Xserver Crashes!! Can you help me to resolv this problem I aprreciate your help!! Saludos from Obregon, Sonora, MEXICO!! XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 29 18:39:03 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "es" (**) XKB: layout: "es" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/CID/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/CID/"). (==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8090, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 1458,2560 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 1458,2562 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 1458,24c2 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1458,24c2 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1458,24c2 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1458,5006 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 82 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 1458,24c2 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1458,24c2 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 1458,a002 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:05:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe800 - 0xe80f (0x10) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device rev 3, Mem @ 0xe000/27, 0xe810/19 (II) Addressable
[XFree86] Fatal Server error..
Hi, I had just started my linux machine and i faced this problem. GUI login screen is not coming and after booting blank screen comes with flickering and later displaying message unable to start XServer. and when i disable gdm in the console screen it displays. Login:gpm: oops() invoked from gpm.c(186) dev/ttyS1: Input/output error I am using RedHat Linux 9.0. Thanks. Manish.__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com XFree86.0.log Description: XFree86.0.log
[XFree86] fatal server error
dear sir , i am new to use linux and i had installed linux9.0 on my system after winxp.i m ble to intall linux on my system but while installing i skep the step to choose graphic card .i have p3 computer with tomto board and intel 800MH processor .and now i am unable to go on graphic modeusing startx command it prompts message fatal server error:x10:fatal io error 104 (connectionreset by peer)on xserver":0.0" after 0 request .by giving this message it comes to command mode again. now what should i do for this short of problems. thank u khagendra dhakal
[XFree86] FATAL SERVER ERROR
Attn. Service department Sir We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. 2RG016685/ 2 Fault details: FATAL SERVER ERROR Can't open log file " /var/log/xfree86.0.log" xinit: connection refused (error no. 111 ) unable to connect to x server x init: no such process ( error no. 3 ) server error Please send your reply immediately Thanks & best regards Mathew John Coca Cola Al Ain, United Arab Emirates +971 50 4492648 This message (including any attachments) contains information that may be confidential. Unless you are the intended recipient, you may not read or disclose to anyone the contents of the message. If you have received the message in error, please advise the sender by reply e-mail, and destroy all copies of the original message (including any attachments). Although this e-mail and any attachment are believed to be free from viruses, it is the responsibility of the recipient to ensure that they are virus free. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error
Hi, I am trying to install redhet linux 7.3 on an IBM intellistation M pro 6850. After the installation, I am able to login in at the command prompt. But once i type startx, it says Fatal Server Error: NO screens found. I am attaching the Xfree86 log with this email for you to have look and tell what should be done Regards, Roshan Herbert XFree86.0.log Description: Binary data
Re: [XFree86] Fatal Server Error
On Wed, 15 Jan 2003 [EMAIL PROTECTED] wrote: > (See attached file: XFree86.0.log) > > when starting the X server there is a fatal server error message and the X > server crashes the error reads a follows: > Fatal Server error: > could not open default font 'fixed' > Do let me know the solution for this problem. Looking forward for your > reply > Please find the XFree86.0.log file. > > Regards, > Nikhil.T It said, "Could not init font path element unix/:7100, removing from list!" Your XF86Config file says to use a font server, yet it doesn't appear that one is running. You either need to start your font server (xfs) or add some new font paths. eg. in your /etc/X11/XF86Config-4, in the Section "Files" add something like: FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal Server Error
Title: RE: [XFree86] Fatal Server Error check "xfs" running check access rights to font paths > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, January 15, 2003 07:53 > To: [EMAIL PROTECTED] > Subject: [XFree86] Fatal Server Error > > > (See attached file: XFree86.0.log) > > when starting the X server there is a fatal server error > message and the X > server crashes the error reads a follows: > Fatal Server error: > could not open default font 'fixed' > Do let me know the solution for this problem. Looking forward for your > reply > Please find the XFree86.0.log file. > > Regards, > Nikhil.T >
Re: [XFree86] Fatal server error:
Richard Yague schrieb: Hello, I am installing Red Hat 8.0 for the first time [...] > I can access the text login, but I can't get X server working (is that > the GUI?). Yes, basically. You still need some more stuff, e.g. a window manager. KDE or GNOME will start one. I don't even know how to copy the file /var/log/XFree86.0.log to a > floppy so I can attach the error log in this email [...] ' man mtools ' or ' info mtools ' will give you some valuable information. Put a DOS-formatted floppy into the drive. If ' mdir a: ' doesn't result an error message, simply ' mcopy /var/log/XFree86.0.log a: '. wij ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error
Is the file there? Are the pemissions OK? David - Original Message - From: "Hixon, Geoff" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, February 12, 2003 8:50 AM Subject: [XFree86] Fatal Server Error > I am running Vector distribution and I am getting the following error. > > Could not init font path element unix:/7100, removing from list! > > Fatal Server Error: > could not open default font 'fixed' > > I tried the resolution that another post had suggested but did not work, here is that fix. > > chmod a+r /usr/X11R6/lib/X11/fonts/misc/fonts.alias > service xfs restart > > The first line goes through no problem, but when I attempt the service xfs restart I get: > > /sbin/service: line 81: /etc/rc.d/init.d/xfs: No such file or directory. > > When I reboot the machine and try startx I get the same error. > > Anyone have any suggestions. > > Thanks > Geoff Hixon > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal Server Error
the bit about "could not open default font 'fixed'" was explained in depth here. Sent: Tuesday, February 04, 2003 5:30 AM Subject: Re: [XFree86] Error Starting X You can use Google to search the site, just go to the Advanced Search Options and set the Domain Option (in the first block of options towards the bottom) to only search http://www.xfree86.org/. Use the subject line as your search term, enclose it in quotes. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error
On Sun, 9 Mar 2003, Delbert Guy Ferry wrote: > The attached log file shows the error I now get when trying to start the > x-server. This started to occur after I ran "up2date" to update the kernal > and some of the kde features. The file "up2date.log" is the relevant > portion of the up2date log which shows exactly which packages I downloaded > and installed. The server error started as soon as I rebooted my system > after the update. > > What do I do to fix this error? > See the archive at: http://marc.theaimsgroup.com/?l=xfree86&r=1&w=2 This question is answered at least twice a day. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error
On Thursday, July 17, 2003 8:52 am, Muench, Dennis wrote: > I'm having problems establishing the log-in screen when start my > computer. Enclosed, you will find the XFree86.0.log file. Any help > will be appreciated. This question has been answered countless times throughout the eternal struggle that is XFree86. Look it up: http://marc.theaimsgroup.com/?l=xfree86&w=2&r=1&s=%22could+not+open+default+font+%27fixed%27%22&q=b 977 hits this year alone... -- Andy Goth | [EMAIL PROTECTED] | http://ioioio.net/ Engineers love to change things. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error .............
hi moiz if you are using i845 chipset if agp download from intel website in cmos active graphics is brookedale-g graphics chipn you will get good resoultion WW) Open APM failed (/dev/apm_bios) (No such file in cmos(bios of system) enable powermanagement (WW) Option "XkbOptions" requires an string value check xkb option(or) run in single usr mode /usr/X11/xf86config there you select n option of xkb option by muneesh From: Syed Moiz Ali <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [XFree86] Fatal server error . Date: Wed, 3 Sep 2003 09:10:26 -0700 (PDT) I am getting an error Fatal server error: no screens found When I try to run Mandarake Linux 9.0 in graphical mode Please help me in getting to know the solution for this problem. I went to xfree86.org website but was not able to identify which file to download... There is a lot of confusion as I am new to Linux. Thanking you in advance Moiz Log file : XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 3 18:46:20 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (WW) Option "XkbOptions" requires an string value (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse1" (**) FontPath set to "unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 8086,2560 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 8086,4c59 rev 01 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,4c59 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,4c59 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 8086,4c59 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 8086,4c59 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 8086,4c59 rev 01 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 8086,0302 rev 01 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1057,5608 card 1057, rev 00 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is
Re: [XFree86] Fatal server error
On Tue, 2003-09-09 at 05:02, Tomás Mateo wrote: > Dear friends: > > Following your instructions about fatal errors, I attach a log file > showing a problem when I try to init my computer in windows mode with XFS isn't running.. http://www.europe.redhat.com/documentation/HOWTO/XDMCP/ts.php3 /etc/rc.d/init.d/xfs restart -lava > "startx" command. > > Please, could you help me? > > Thanks in advance. > Tomás Mateo > -- l8*, -lava peace, love, UNIX NOTE: When replying to a mailing list post, please be sure to reply to the /list/ and cc: or bcc: myself as I am unable to promise a timely response. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error
From: "Douglas Pike" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: <[EMAIL PROTECTED]> Subject: [XFree86] Fatal Server Error Date: Tue, 30 Sep 2003 15:15:00 -0700 I am getting a strange error that says "Cannot move old logfile "/var/log/XFree86.0.log.old" This happens when trying to log on as a user. root is ok. I am running a Dell 2650 Server Dual 3.02 Ghz proc 4GB RAM, Mandrake 9.1. If anyone can help please let me know. Thanx, Douglas Pike This probably means that the file belongs to root and its permissions have been set so that root can read-write the file. You have to do a chmod command to change its permissions. Logina s root and type the following command: %: chmod 777 /var/log/XFree86.0.log.old this will change its permissions so that everybody is able to read, write and execute it. I thinkt hat some people prefer to change its permissions to 755 ebcause 777 can lead to some security loop holes or something... Not too sure about that but try it anyway! ;) e-regular _ Get less junk mail with ninemsn Premium. Click here http://ninemsn.com.au/premium/landing.asp ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error:
This seems to be a common problem on RH 9. I don't think anyone knows why it happens yet. Somehow, some crucial XFree86 modules are missing. Reinstalling XFree86 is the only solution I know of. Mark. On Sat, 18 Oct 2003, [iso-8859-1] sheril jose wrote: > Sir, > > I have a PC running redhat 9. Now the PC is showing some error while booting > through XFree86 sever. > > "Fatal server error: > Unable to load required base modules, Exiting..." > > > > Here i am attaching the XFree86.0.log for ur refference and give me solution for > this as soon as possible. > > > > Sheril K Jose. > > > > Yahoo! India Matrimony: Find your partner online.Post your profile. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error -XFree86
Hi, I have installed XFree86 4.3.0 from this url ftp://ftp.xfree86.org/pub/XFree86/ in my linux intel system for this video driver is cirrus. i have the following erros, Fatal Server error,Server is already active display.0,if this server is no longer running,remove /tmp/.x0-lock and start again this comes when attempt to the following command, XFree86 -configure. also i cannot able to get GNOME or KDE menu. thanks in advance, kamesh raja s Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more. Download now.
[XFree86] Fatal server error: lockup
Hi all, i'm using : OS - redhat Linux 9 - KDE I get following errors at boot time : - server Authorization dir (doemon / ServerAuthDir) is set to /var/gdm is NOT owned by user gdm & group gdm. Please correct the ownership or gdm configuration /etc/X11/gdm.conf and RESTART gdm Query : HOW TO DO IT ... --- At present i start by : startx (at root) and facing more error as : - Fatal server error : lockup - server crash !! (may be..) - I viewed : /var/log/XFree86.0.log found : (II) I810(0): direct rendering: Failed - Xinit : connection to X server lost Hangup GOT SIGNUP startkde : shutting down... - my /var/log/xfree86.0.log file is : - XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Apr 13 10:00:08 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8003080c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 8086,2562 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,24c0 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,24c0 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,24c0 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 8086,24c0 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 82 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 8086,24c0 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 13f6,0300 rev 02 class 04,01,00 hdr 00 (II) PCI: 03:01:0: chip 10ec,8139 card 10bd,0320 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 3 non-prefetchable memory range: [0]
Re: [XFree86] fatal server error:
root wrote: > could not open default font when reporting a problem related to a server > crash, please send the full server output, not just the last message. XIO: > fatal IO error 104(Connection reset by peer) on X server ":0.0" after 0 > request (0 known processed) with 0 events remaining. please try helpme to > resolve this problem. mi email is [EMAIL PROTECTED], send me a solution > for this problem please. Enable the X Font Server (xfs). Otherwise ensure you have installed the fonts for X and have the path correct in your config file. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error
kabiru maiyama wrote: > Hello > I am using mandrake linux 9.2 operating system and is my mail server. When I restart > the system to change hardware (mouse) it start at the console. I login as root and > entered my root password. When I attempt to swith to graphical user interface (ie > kde) it report the following error > fatal server error > could not open default font 'fixed' > XIOl : fatal IO error 104 (Connection reset by peer) on X server ":0.0" > after zero requests (0 known processed) with 0 events remaining. The X Font Server (xfs) is not running. Either restart xfs or edit your XF86Config (in /etc/X11) to use the font directory paths directly (my preference for occassional use of X on a Internet facing server like a mail server). ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error
Remove the BusID line from the Section "Device" in your XF86Config-4 file. It's wrong, and the server would have found the card by itself if it wasn't for the explicit instruction to look for the card in the wrong place. Mark. On Thu, 14 Oct 2004, Erik Knight wrote: > Hi everyone, > > I've been trying to to solve this for a couple of days now. I've read > all the documentation I could find, with no changes. I've installed > all the autodection packages to see if my variables were wrong. I've > installed XFree86 manually (not using apt-get x-window-system). > > The system is debian with kernel 2.2.20-idepci on a i686. The video > card is a Riva tnt2, which should be compatible with the 'nv' driver. > Then monitor is an emachines eview17 I've got the right specs for it. > Keyboard and mouse are standard us layout logitech cordless combo. > > I've attached the comfig file and the log file. If anyone could help > me out I'd really appreciate it. > > Thanks > > Erik > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error
Hey thanks a lot, That totally fixed the problem. Those 'wrong' values were actually what I input during the config process. I ran lspci when it asked for that info and I guess I didn't really understand the output properly. However if I just left that step blank, or later deleted the entry from the config file then everything worked out. Again, thanks a lot, Erik On Thu, 14 Oct 2004 10:46:42 -0700 (PDT), Mark Vojkovich <[EMAIL PROTECTED]> wrote: > >Remove the BusID line from the Section "Device" in your XF86Config-4 > file. It's wrong, and the server would have found the card by itself > if it wasn't for the explicit instruction to look for the card in the > wrong place. > > Mark. > > > > On Thu, 14 Oct 2004, Erik Knight wrote: > > > Hi everyone, > > > > I've been trying to to solve this for a couple of days now. I've read > > all the documentation I could find, with no changes. I've installed > > all the autodection packages to see if my variables were wrong. I've > > installed XFree86 manually (not using apt-get x-window-system). > > > > The system is debian with kernel 2.2.20-idepci on a i686. The video > > card is a Riva tnt2, which should be compatible with the 'nv' driver. > > Then monitor is an emachines eview17 I've got the right specs for it. > > Keyboard and mouse are standard us layout logitech cordless combo. > > > > I've attached the comfig file and the log file. If anyone could help > > me out I'd really appreciate it. > > > > Thanks > > > > Erik > > > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error(4.4.0)
I am not able to start X session after i installed Xfree864.4.0 i installed the folowing other than the mandatory files Xdrm.tgz Xnest.tgz Xfsrv Xvfb not able to 'make' in /usr/X11R6/src/linux/kernel/xdrm files error: no member count i am attching the xfree86.0.log file please reply immediately __ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs XFree86.0.log Description: XFree86.0.log
[XFree86] Fatal server error: HELP!
After type startx, it only show the screen of nVIDIA logo, then jump out back to console with following error code, what is that mean? and how to solve it out? Fatal server error: Caught signal 11. Server aborting XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining.
Re: [XFree86] FATAL SERVER ERROR
The server needs to have write access to /var/log/ so it can write its log file. It sounds like your server doesn't have root permissions. It's typical to make it suid root. Mark. On Mon, 16 Jan 2006, Mathew John wrote: > Attn. Service department > > Sir > > We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. > 2RG016685/ 2 > > Fault details: > > FATAL SERVER ERROR > Can't open log file " /var/log/xfree86.0.log" > xinit: connection refused (error no. 111 ) unable to connect to x server > x init: no such process ( error no. 3 ) server error > > Please send your reply immediately > > Thanks & best regards > > Mathew John > Coca Cola > Al Ain, United Arab Emirates > +971 50 4492648 > This message (including any attachments) contains information that may be > confidential. Unless you are the intended recipient, you may not read or > disclose to anyone the contents of the message. If you have received the > message in error, please advise the sender by reply e-mail, and destroy all > copies of the original message (including any attachments). Although this > e-mail and any attachment are believed to be free from viruses, it is the > responsibility of the recipient to ensure that they are virus free. > > ___ > XFree86 mailing list > XFree86@XFree86.Org > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] FATAL SERVER ERROR
Thank you, but if I have to give the server write access how do I do that? Since I can't log in except for a DOS like prompt, how can I change permissions? Thanks again Garrett Jochimsen IT Department Documation LLC 715-552-5791 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Vojkovich Sent: Monday, January 16, 2006 11:44 AM To: Mathew John Cc: xfree86@xfree86.org Subject: Re: [XFree86] FATAL SERVER ERROR The server needs to have write access to /var/log/ so it can write its log file. It sounds like your server doesn't have root permissions. It's typical to make it suid root. Mark. On Mon, 16 Jan 2006, Mathew John wrote: > Attn. Service department > > Sir > > We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. > 2RG016685/ 2 > > Fault details: > > FATAL SERVER ERROR > Can't open log file " /var/log/xfree86.0.log" > xinit: connection refused (error no. 111 ) unable to connect to x server > x init: no such process ( error no. 3 ) server error > > Please send your reply immediately > > Thanks & best regards > > Mathew John > Coca Cola > Al Ain, United Arab Emirates > +971 50 4492648 > This message (including any attachments) contains information that may be > confidential. Unless you are the intended recipient, you may not read or > disclose to anyone the contents of the message. If you have received the > message in error, please advise the sender by reply e-mail, and destroy all > copies of the original message (including any attachments). Although this > e-mail and any attachment are believed to be free from viruses, it is the > responsibility of the recipient to ensure that they are virus free. > > ___ > XFree86 mailing list > XFree86@XFree86.Org > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] FATAL SERVER ERROR
chmod +s /usr/X11R6/bin/XFree86 Will give the server root's permissions. Mark. On Mon, 16 Jan 2006, Garrett Jochimsen wrote: > Thank you, but if I have to give the server write access how do I do that? > Since I can't log in except for a DOS like prompt, how can I change > permissions? > > Thanks again > > Garrett Jochimsen > IT Department > Documation LLC > 715-552-5791 > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Mark Vojkovich > Sent: Monday, January 16, 2006 11:44 AM > To: Mathew John > Cc: xfree86@xfree86.org > Subject: Re: [XFree86] FATAL SERVER ERROR > > The server needs to have write access to /var/log/ so it > can write its log file. It sounds like your server doesn't > have root permissions. It's typical to make it suid root. > > Mark. > > On Mon, 16 Jan 2006, Mathew John wrote: > > > Attn. Service department > > > > Sir > > > > We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no. > > 2RG016685/ 2 > > > > Fault details: > > > > FATAL SERVER ERROR > > Can't open log file " /var/log/xfree86.0.log" > > xinit: connection refused (error no. 111 ) unable to connect to x server > > x init: no such process ( error no. 3 ) server error > > > > Please send your reply immediately > > > > Thanks & best regards > > > > Mathew John > > Coca Cola > > Al Ain, United Arab Emirates > > +971 50 4492648 > > This message (including any attachments) contains information that may be > > confidential. Unless you are the intended recipient, you may not read or > > disclose to anyone the contents of the message. If you have received the > > message in error, please advise the sender by reply e-mail, and destroy > all > > copies of the original message (including any attachments). Although this > > e-mail and any attachment are believed to be free from viruses, it is the > > responsibility of the recipient to ensure that they are virus free. > > > > ___ > > XFree86 mailing list > > XFree86@XFree86.Org > > http://XFree86.Org/mailman/listinfo/xfree86 > > > ___ > XFree86 mailing list > XFree86@XFree86.Org > http://XFree86.Org/mailman/listinfo/xfree86 > > ___ > XFree86 mailing list > XFree86@XFree86.Org > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error -XFree86
kamesh raja swaminathan wrote: > I have installed XFree86 4.3.0 from this url > Fatal Server error,Server is already active display.0,if this server is > no longer running,remove /tmp/.x0-lock and start again > > this comes when attempt to the following command, > XFree86 -configure. rm -rf /tmp/.x0-lock XFree86 -configure If it is generated, your /var/log/XFree86.0.log would be useful. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error(4.4.0)
On Mon, Mar 21, 2005 at 08:07:31PM -0800, chelfan wrote: > I am not able to start X session after i installed >Xfree864.4.0 > > i installed the folowing other than the mandatory >files > > Xdrm.tgz > Xnest.tgz > Xfsrv > Xvfb > > not able to 'make' in >/usr/X11R6/src/linux/kernel/xdrm files > > error: no member count The 4.4.0 DRM source won't build on some newer kernels. The 4.5.0 version builds on the latest kernels as of when it was released (last week). This is, however, unrelated to the problem you are seeing. >i am attching the xfree86.0.log file According to the log, XFree86 is failing to guess what your mouse device is. This is improved significantly in 4.5.0. If it should still fail to guess your mouse device there, let us know. You can give it some help by creating a symlink from your mouse device to /dev/mouse. David ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error: HELP!
On 6/27/05, Sean <[EMAIL PROTECTED]> wrote: > After type startx, it only show the screen of nVIDIA logo, then jump out > back to console with following error code, what is that mean? and how to > solve it out? Since you said you see the nVidia logo, it sounds like you're using their binary driver, which will make it difficult for people other than nVidia to give you assistance. My guess would be that you have the wrong nVidia driver installed. If you want any more assistance from this list, you're going to at least give us some more information. What card are you using? What driver and version are you using? What version of XFree86 are you using? What OS/distribution? Also, the full log file can be helpful, too. -Andy ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found
Okay, I'm a newbie - so this one should be simple? I'm running QNX v6.2, I've downloaded and installed the XFree86 for QNX. When I run "startx", I get the following: XFree86 Version 4.2.0 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 11 March 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: QNX6/Neutrino QNX Software Systems Ltd. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 13 16:49:56 2003 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] Thanks for your help. Jim ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: No screens found !
Hi, Could you please tell me what the error could be? That was the first run after the installation on an old PII Compaq PC. I didn't change any of the proposals anaconda made while the installation process. Thanks Jannis __ vCard - noch nie gehoert? Dann schaun Sie mal rein bei WEB.DE FreeMail. http://freemail.web.de/features/?mc=021155 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found
Version of BSD is FreeBSD 4.7 video Trio32 1mb -- Best regards, Anton Maidykovski,Research Assistant. Moscow State University, Physics Department, Quantum Electronics Division, Laboratory of Nonlinear Optics of Nanostructures and Photonic Crystals. http://www.shg.ru mailto:[EMAIL PROTECTED] XFree86.0.log Description: Binary data
[XFree86] fatal server error: no screen found
an unexpected crash happen in Redhat 7.3, KDE 3. Attached is hte /var/log/XFree86.9.log thanks laurence XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.9.log", Time: Tue Jul 23 16:23:01 2002 (++) Using config file: "/tmp/xf86config-TLeCvM" Parse warning on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM Ignoring obsolete keyword "LeftAlt". Parse error on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM "Meta" is not a valid keyword in this section. (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.9.log". Please report problems to [EMAIL PROTECTED]
[XFree86] fatal server error: no screens found
Hi, I have a problem that I can not fix. After startx I get the message "fatal server error: no screens found". I think it is the video card, I found a help request of someone else that has the same problem as I have and he has the same video chip (http://forum.mlug.org.au/bbshowpost.php?bbsubject_id=177) My system is a pentium 166 mmx, and my video card is: vendor: sparkle (?) chip set: S3 Trio64V2/DX I use linux: 2.4.18-14 distribution: red hat 8.0, (7.3 gives the same problem) (See attached file: XF86Config.txt)(See attached file: XFree86.0.log) Do you know a work around for this? After serveral evenings I currently has given up trying and now think about bying a different video card. Joost ter Laak XF86Config.txt Description: Binary data XFree86.0.log Description: Binary data
[XFree86] Fatal server error: no screens found
Hi. I am trying to run XFree86 on RedHat 9.0 using Virtual PC 5.2 for Windows, but whenever I try to startx, I get the message below. How do I configure XFree86 to recognize the VPC terminal? Thanks in advance. Greg [EMAIL PROTECTED] root]# more /var/log/XFree86.0.log XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc versi n 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jun 3 21:15:22 2003 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error in X Server
Saluta List, I am running Red Hat 9 with rebooted my machine and my XServer is not starting now(XFree86 Version 4.3.0 (Red Hat Linux Release 4.3.0-2)) I observed the /var/log/XFree86.0.log file very carefully, the only important thing I observed is: Fatal Server Error: could not open default font 'fixed' One idea I have is to remove all XFree86 Packages reinstalling them from the CD by first trying the font packages individually. Can someone suggest something else.? Well, I am a naughty boy, was trying to run one X Server over the Other and it happened. I did not realize that when I will reboot, I will face problems. That Machine is not on Internet, neither do I have any floppy or something so cannot send the complete /var/log/Xfree86.0.log file Any Help will be appreciated, Sincerely Rohit ___ Get www. mycompany .com and 5 matching email ids. Just Rs. 1499/ year. Click here http://www.rediffmailpro.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found
I'm trying to build an intra Net with LTSP in a school (La Paz - Bolivia) 1 Server PIII 1.2 GH, Linux Mandrake 8.1, RAM 512 MB, HD 40 GB. 18 LessDisk terminals (BootDisk) 486, PI and PII NET Topology = BUS Coaxial I'm almost ready with this NET. but when a terminal is trying to get into SFree (graphical plataform) it shows the message: Fatal server error: no screens found The file /var/log/XFree86.0.log is bellow: XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.8-5mdkenterprise i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jun 9 14:33:22 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "Generic|SVGA alta-frecuencia, 1024x768 a 70 Hz" (**) | |-->Device "SiS 300" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "250 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "es" (**) XKB: layout: "es" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:-1" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80003888, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card 1458,5000 rev c4 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0686 card 1458,5001 rev 40 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 1458,5002 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 1458,5004 rev 1a class 0c,03,00 hdr 00 (II) PCI: 00:07:4: chip 1106,3057 card 1458,5003 rev 40 class 0c,05,00 hdr 00 (II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0d:0: chip 10ec,8029 card , rev 00 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1039,0300 card 1039,0300 rev 90 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0x8000 - 0xafff (0x3000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xdfe0 - 0xdfef (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xcfc0 - 0xdfcf (0x1010) MX[B] (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) SiS 300 rev 144, Mem @ 0xd000/27, 0xdfee/17, I/O @ 0xa000/7, BIOS @ 0xdfed/16 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1)
[XFree86] Fatal Server error: no screens found...
Hey Everybody, So I'm taking a Linux class right now, but unfortunately, it doesn't continue until next week, hence the question I pose to you today. Please keep in mind, this might be a stupid newbie question... I have installed Redhat Linux 8.0 on my Compaq Presario 1200 laptop. I installed everything because we are learning how to use all features of Linux for class. Anyways, during the end of the installation, I don't believe they detected my screen or video card, which I have no clue what it is. After the installation, i type startx in root, and it spits this out... --- (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 8 11:32:39 2003 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal Server error: no screens found When reporting a problem. XIO: fatal error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining can someone tell me what to do? I don't even know how to get back to the screen which you can change the monitor settings. please keep in mind I have no Linux related exprience at all, so if you could do me a favor and tell me exactly what to type, i'd really appreciate it. like exactly what to type. Thank you in advance...and if someone has some great sites to check out for newbies, i'd really appreciate it. Thanks ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found
Hi! Big trouble. I can't load it at all. I couldn't load it in the original release with redhat either, but then i read in some forum about people with Radeon cards that mad it work with you newest release. This however didn't work for me. Hope you can help! - Hampus XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 15 03:34:53 2003 (++) Using config file: "/root/XF86Config.new" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/CID/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/CID/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 1028,0142 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2561 card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24c2 card 1028,0142 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1028,0142 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1028,0142 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1028,0142 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 1028,0142 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1028,0142 rev 01 class 0c,05,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4e45 card 1002,3002 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4e65 card 1002,3003 rev 00 class 03,80,00 hdr 00 (II) PCI: 02:00:0: chip 104c,8020 card 1028,8010 rev 00 class 0c,00,10 hdr 00 (II) PCI: 02:01:0: chip 14f1,2016 card 13e0,021a rev 01 class 07,80,00 hdr 00 (II) PCI: 02:02:0: chip 1102,0006 card 1102,1003 rev 00 class 04,01,00 hdr 80 (II) PCI: 02:02:1: chip 1102,7004 card 1102,1003 rev 00 class 09,80,00 hdr 80 (II) PCI: 02:08:0: chip 8086,1039 card 1028,0142 rev 81 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xe000 - 0xe0ff (0x100) IX[B] [1] -1 0 0xe400 - 0xe4ff (0x100) IX[B] [2] -1 0 0xe800 - 0xe8ff (0x100) IX[B] [3] -1 0 0xec00 - 0xecff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xff80 - 0xff9f (0x20) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe800 - 0xf7ff (0x1000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared) (II
[XFree86] Fatal Server Error: No Screens found
Hello, I am Installing Redhat Linux Version 9 on my E-machines M5310 laptop. Whenever I try to start X I get the following error message. Its an Athlon XP-M machine with an ATI Radeon IGP graphics card which auto detects in Redhat as ATI Mobility U1. Is there anyone who has experienced this problem or has a fix for this issue? XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Aug 4 14:04:25 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80012814, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab0 card , rev 13 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,700f card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:08:0: chip 10b9,5451 card 161f,2029 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:09:0: chip 10b9,5457 card 161f,2027 rev 00 class 07,03,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac41 card 4000, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:0a:1: chip 104c,8017 card 161f,2029 rev 02 class 0c,00,10 hdr 80 (II) PCI: 00:0c:0: chip 14e4,4320 card 144f,7050 rev 02 class 02,80,00 hdr 00 (II) PCI: 00:0d:0: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 80 (II) PCI: 00:0d:1: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 00 (II) PCI: 00:0d:2: chip 1033,00e0 card 161f,2029 rev 04 class 0c,03,20 hdr 00 (II) PCI: 00:0e:0: chip 14e4,4401 card 161f,2029 rev 01 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 10b9,5229 card 161f,2029 rev c4 class 01,01,fa hdr 00 (II) PCI: 00:11:0: chip 10b9,7101 card 161f,2029 rev 00 class 06,80,00 hdr 00 (II) PCI: 01:05:0: chip 1002,4336 card 161f,2029 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x9000 - 0x90ff (0x100) IX[B] [1] -1 0 0x9400 - 0x94ff (0x100) IX[B] [2] -1 0 0x9800 - 0x98ff (0x100) IX[B] [3] -1 0 0x9c00 - 0x9cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd010 - 0xd01f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe000 - 0xefff (0x1000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BC
[XFree86] Fatal Server Error: No Screens found
Hello, I am Installing Redhat Linux Version 9 on my E-machines M5310 laptop. Whenever I try to start X I get the following error message. Its an Athlon XP-M machine with an ATI Radeon IGP graphics card which auto detects in Redhat as ATI Mobility U1. Is there anyone who has experienced this problem or has a fix for this issue? XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Aug 4 14:04:25 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80012814, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab0 card , rev 13 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,700f card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:08:0: chip 10b9,5451 card 161f,2029 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:09:0: chip 10b9,5457 card 161f,2027 rev 00 class 07,03,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac41 card 4000, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:0a:1: chip 104c,8017 card 161f,2029 rev 02 class 0c,00,10 hdr 80 (II) PCI: 00:0c:0: chip 14e4,4320 card 144f,7050 rev 02 class 02,80,00 hdr 00 (II) PCI: 00:0d:0: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 80 (II) PCI: 00:0d:1: chip 1033,0035 card 161f,2029 rev 43 class 0c,03,10 hdr 00 (II) PCI: 00:0d:2: chip 1033,00e0 card 161f,2029 rev 04 class 0c,03,20 hdr 00 (II) PCI: 00:0e:0: chip 14e4,4401 card 161f,2029 rev 01 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 10b9,5229 card 161f,2029 rev c4 class 01,01,fa hdr 00 (II) PCI: 00:11:0: chip 10b9,7101 card 161f,2029 rev 00 class 06,80,00 hdr 00 (II) PCI: 01:05:0: chip 1002,4336 card 161f,2029 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x9000 - 0x90ff (0x100) IX[B] [1] -1 0 0x9400 - 0x94ff (0x100) IX[B] [2] -1 0 0x9800 - 0x98ff (0x100) IX[B] [3] -1 0 0x9c00 - 0x9cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd010 - 0xd01f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe000 - 0xefff (0x1000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BC
[XFree86] Fatal server error: no screens found
Hi all This seems to be a common problem, but i havent found a solution. im using Redhat 9 on a compaq evo 1015v and a Radeon Mobility U1 During installation X was running (it was a graphical install) but after installation i cant run X. get the usual (EE) No devices detected. Fatal server error: no screens found thanks, Mohammed XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Nov 18 01:07:15 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "gb" (**) XKB: layout: "gb" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab0 card , rev 13 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,700f card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 00 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:08:0: chip 10b9,5451 card 0e11,00b0 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac50 card 4000, rev 02 class 06,07,00 hdr 02 (II) PCI: 00:0b:0: chip 10ec,8139 card 0e11,00b0 rev 20 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 14f1,2f00 card 0e11,8d89 rev 01 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 00 (II) PCI: 00:10:0: chip 10b9,5229 card 10b9,5229 rev c4 class 01,01,fa hdr 00 (II) PCI: 00:11:0: chip 10b9,7101 card 10b9,7101 rev 00 class 06,80,00 hdr 00 (II) PCI: 01:05:0: chip 1002,4336 card 0e11,00b0 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x9000 - 0x90ff (0x100) IX[B] [1] -1 0 0x9400 - 0x94ff (0x100) IX[B] [2] -1 0 0x9800 - 0x98ff (0x100) IX[B] [3] -1 0 0x9c00 - 0x9cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf410 - 0xf41f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf600 - 0xf7ff (0x200) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x4000 - 0x40ff (0x100) IX[B] [1] -1 0 0x4400 - 0x44ff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0x1000 - 0x103f (0x40) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xffbfd000 - 0xffbfdfff (0x1000) MX[B] (-
[XFree86] Fatal server error: no screen found
Hi! What should I do? -- ICQ# 73217209 http://www.againsttcpa.com http://www.stop1984.com +++ NEU bei GMX und erstmalig in Deutschland: TÜV-geprüfter Virenschutz +++ 100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz XFree86.0.log Description: Binary data
[XFree86] Fatal Server Error: No Screens found
Hi, I have done a fresh install on Red Hat Linux 7.3. I am not able to get the GUI. The following are the relevant files (attached): 1. XFree86.0.log 2. XF86Config-4 (as shown in the log) 3. Version of XFree86 "XFree86 Version 4.2.0" 4. Operating System "Red Hat Linux release 7.3 (Valhalla)" 5. Video Hardware "ATI Fire GL E 1,64MB for DELL M992 (19" CRT)" Any suggestions are greatly welcome, Thanks, Krishna __ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail XFree86.0.log Description: XFree86.0.log # XFree86 4.2.0 configuration generated by Xconfigurator 4.10.7 Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice"Mouse0" "CorePointer" InputDevice"Keyboard0" "CoreKeyboard" EndSection # Red Hat Linux 6.0 and later use the xfs font server for improved # interactive performance Section "Files" FontPath "unix/:7100" EndSection # Module loading section Section "Module" Load "dbe" # Double-buffering Load "GLcore" # OpenGL support Load "dri" # Direct rendering infrastructure Load "glx" # OpenGL X protocol interface Load "extmod" # Misc. required extensions Load "v4l" # Video4Linux # Load "record"# X event recorder # You only need the following two modules if you do not use xfs. # Load "freetype" # TrueType font handler # Load "type1" # Adobe Type 1 font handler EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "IMPS/2" Option "Emulate3Buttons" "off" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "DELL P992" VendorName "Unknown" ModelName "Unknown" HorizSync 30 - 107 VertRefresh 48 - 170 Option "dpms" EndSection Section "Device" Identifier "ATI|Radeon R200 QH" Driver "radeon" BoardName "Unknown" # DRI is not currently supported on Radeon 8500, as of XFree86 4.2.0 Option "nodri" EndSection Section "Device" Identifier "Linux Frame Buffer" Driver "fbdev" BoardName "Unknown" EndSection Section "Screen" Identifier "Screen0" Device "ATI|Radeon R200 QH" Monitor "DELL P992" DefaultDepth 16 Subsection "Display" Depth 16 Modes "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection [EMAIL PROTECTED] root]# XFree86 -version XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present [EMAIL PROTECTED] root]# Video Card ATI Radeon 8500 - 64MB Monitor DELL P992 ( as probed ) 17" CRT[EMAIL PROTECTED] root]# cat /etc/redhat-release Red Hat Linux release 7.3 (Valhalla) [EMAIL PROTECTED] root]#
[XFree86] Fatal Server Error - No Screens Found
When I attempt to configure, I receive an error message about missing libglide2x.so, not sure if it is related to my main problem of "no screens found." My intuition leads me to suspect this is something to do with my having a video card in a AGP slot on a motherboard with an integrated video card. My display works fine in text mode, but I am unable to get into any kind of graphics mode. When I do startx I get a black screen and only return to text mode after several CTRL-C attempts. My monitor is plugged into the video card in the AGP slot. It works perfectly fine in Windows XP with my current setup. Thanks for any suggestions you may be able to provide. Bob King ** Contents of Log File Follow ** _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/subbob.us:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.4.0 Release Date: 29 February 2004 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux subbob.us 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 Build Date: 27 February 2004 Changelog Date: 29 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 29 08:53:42 2005 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "NVIDIA GeForce 256 (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.4.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.4.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 14f1,1033 card 122d,4034 rev 08 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4150 card 1545,7c20 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4170 card 1545,7c21 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -100x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) (II) Bus 1 I/O range: [0] -100xd000 - 0xd0ff (0x100) IX[B] [1] -100xd400 - 0xd4ff (0x100) IX[B] [2] -100xd800 - 0xd8ff (0x100) IX[B] [3] -100xdc00 - 0xdcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0]
[XFree86] Fatal Server Error - No Screens Found
When I attempt to configure, I receive an error message about missing libglide2x.so, not sure if it is related to my main problem of "no screens found." My intuition leads me to suspect this is something to do with my having a video card in a AGP slot on a motherboard with an integrated video card. My display works fine in text mode, but I am unable to get into any kind of graphics mode. When I do startx I get a black screen and only return to text mode after several CTRL-C attempts. My monitor is plugged into the video card in the AGP slot. It works perfectly fine in Windows XP with my current setup. I'm running with a dual boot system - linux and Win XP - so I am certain the monitor/video card combo works in Windows. Thing's I've tried already: -- searching the XFree86 archive for libglide2x.so issues - didn't find anything that helped with my situation -- copying libglide3.so to libglide2x.so - didn't work, was not able to "fool" the system this way -- downloading and installing a libglide2 RPM - would not install, there were conflicts with other installed RPMs -- removing libglide3 RPM - could not do it, too many dependencies -- forced installation of the libglide2 RPM - still receive the libglide2x.so error message -- plugging a second monitor into the port connected to the integrated video card on the motherboard - no change Thanks for any suggestions you may be able to provide. Bob King ** Contents of Log File Follow ** _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/subbob.us:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.4.0 Release Date: 29 February 2004 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux subbob.us 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 Build Date: 27 February 2004 Changelog Date: 29 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 29 08:53:42 2005 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "NVIDIA GeForce 256 (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.4.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.4.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 14f1,1033 card 122d,4034 rev 08 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4150 card 1545,7c20 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4170 card 1545,7c21 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set
[XFree86] Fatal Server Error: No Screens Found
Hi! I recently installed Turbolinux. When I try to start it, log-in, and type startx, i get an error than no screens are found. Unfortunatley, I've been unable to access my files that have the complete error. Please let me know if you need more info so I can try to find it. Thanks! Phillip C.
Re: [XFree86] Fatal server error: no screens found
On Mon, 13 Jan 2003, Eiler, James A. wrote: > (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 13 16:49:56 2003 > (EE) Unable to locate/open config file Dead giveaway ;) [mharris: perhaps this is another of those cases where the X server can try to fix a few things and -- if they work -- give a good diagnostics message or -- if they don't -- at least tell us where it tried to look for the file? The pie in the sky goal would of course be to make it work /without/ a configuration file unless the hardware was really strange...] Ok, you have no configuration file. Do you have a sample file you can modify? Have you read http://www.xfree86.org/4.2.0/XF86Config.5.html ? (should be the same as man 5 XF86Config but one never knows) What hardware do you have? You can also try: XFree86 -configure which should generate a configuration file for you (which might work straight away or might need some further hand tuning). -Peter ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal server error: no screens found
More data.
I've done the
XFree86 -configure
and have a file called XF86Config.new (contents below).
On my QNX box, XF86Config.new resides in my /root directory.
After running XFree86 -configure, it tells me to test the configuration
by running:
XFree86 -xf86config /root/XF86Config.new
I do, and I get an X-windows session (I think) but no icons to click.
Just the mouse pointer to move around
If I try "startx", I get the error I wrote about initially -
no screens found.
Any more help out there?
Thanks,
Jim
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice"Mouse0" "CorePointer"
InputDevice"Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/opt/X11R6/lib/X11/rgb"
ModulePath "/opt/X11R6/lib/modules"
FontPath "/opt/X11R6/lib/X11/fonts/misc/"
FontPath "/opt/X11R6/lib/X11/fonts/Speedo/"
FontPath "/opt/X11R6/lib/X11/fonts/Type1/"
FontPath "/opt/X11R6/lib/X11/fonts/CID/"
FontPath "/opt/X11R6/lib/X11/fonts/75dpi/"
FontPath "/opt/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "OSMouse"
Option "Device" "/dev/devi/mouse0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName"Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, : float, : "True"/"False",
### : "String", : " Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # []
#Option "HWcursor" # []
#Option "NoAccel" # []
#Option "ShowCache" # []
#Option "ShadowFB" # []
#Option "UseFBDev" # []
#Option "Rotate"# []
#Option "VideoKey" #
#Option "FlatPanel" # []
Identifier "Card0"
Driver "nv"
VendorName "NVidia"
BoardName "Riva TNT2 M64"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor"Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
-Original Message-
From: Peter Finderup Lund [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 13, 2003 2:37 PM
To: '[EMAIL PROTECTED]'
Subject: Re: [XFree86] Fatal server error: no screens found
On Mon, 13 Jan 2003, Eiler, James A. wrote:
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 13 16:49:56 2003
> (EE) Unable to locate/open config file
Dead giveaway ;)
[mharris: perhaps this is another of those cases where the X server can
try to fix a few things and -- if they work -- give a good diagnostics
message or -- if they don't -- at least tell us where it tried to look for
the file? The pie in the sky goal would of course be to make it work
/without/ a configuration file unless the hardware was really strange...]
Ok, you have no configuration file. Do you have a sample file you can
modify? Have you read http://www.xfree86.org/4.2.0/XF86Config.5.html ?
(should be the same as man 5 XF86Config but one never knows)
What hardware do you have?
You can also try:
XFree86 -configure
which should generate a configuration file for you (which might work
straight away or might need some further hand tuning).
-Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal server error: no screens found
Never mind. I'm an idiot!
After re-re-re-reading the installation notes at
http://sourceforge.net/forum/forum.php?forum_id=163323
I saw the part about copying the config file to
/etc/X11/XF86Config-4.
All better now.
Thanks to all who helped.
Jim
-Original Message-
From: Eiler, James A. [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 13, 2003 4:36 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [XFree86] Fatal server error: no screens found
More data.
I've done the
XFree86 -configure
and have a file called XF86Config.new (contents below).
On my QNX box, XF86Config.new resides in my /root directory.
After running XFree86 -configure, it tells me to test the configuration
by running:
XFree86 -xf86config /root/XF86Config.new
I do, and I get an X-windows session (I think) but no icons to click.
Just the mouse pointer to move around
If I try "startx", I get the error I wrote about initially -
no screens found.
Any more help out there?
Thanks,
Jim
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice"Mouse0" "CorePointer"
InputDevice"Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/opt/X11R6/lib/X11/rgb"
ModulePath "/opt/X11R6/lib/modules"
FontPath "/opt/X11R6/lib/X11/fonts/misc/"
FontPath "/opt/X11R6/lib/X11/fonts/Speedo/"
FontPath "/opt/X11R6/lib/X11/fonts/Type1/"
FontPath "/opt/X11R6/lib/X11/fonts/CID/"
FontPath "/opt/X11R6/lib/X11/fonts/75dpi/"
FontPath "/opt/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "OSMouse"
Option "Device" "/dev/devi/mouse0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName"Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, : float, : "True"/"False",
### : "String", : " Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # []
#Option "HWcursor" # []
#Option "NoAccel" # []
#Option "ShowCache" # []
#Option "ShadowFB" # []
#Option "UseFBDev" # []
#Option "Rotate"# []
#Option "VideoKey" #
#Option "FlatPanel" # []
Identifier "Card0"
Driver "nv"
VendorName "NVidia"
BoardName "Riva TNT2 M64"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor"Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
-Original Message-
From: Peter Finderup Lund [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 13, 2003 2:37 PM
To: '[EMAIL PROTECTED]'
Subject: Re: [XFree86] Fatal server error: no screens found
On Mon, 13 Jan 2003, Eiler, James A. wrote:
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 13 16:49:56 2003
> (EE) Unable to locate/open config file
Dead giveaway ;)
[mharris: perhaps this is another of those cases where the X server can
try to fix a few things and -- if they work -- give a good diagnostics
message or -- if they don'
RE: [XFree86] Fatal server error: no screens found
On Mon, 13 Jan 2003, Eiler, James A. wrote: > Never mind. I'm an idiot! > > After re-re-re-reading the installation notes at > http://sourceforge.net/forum/forum.php?forum_id=163323 > I saw the part about copying the config file to > /etc/X11/XF86Config-4. Interesting - the notes also said to run XFree86 -configure ;) > Thanks to all who helped. You are welcome :) -Peter ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal server error: no screen found
A few more details would be helpful (monitor, graphic card, full XF86Config, full log) However , from the parsing error and the fact that you are not using the standard /etc/X11/XF86Config resp. /etc/X11/XF86Config-4 (which would be the RH 7.x version for X 4.x.x) I wonder whether you are not using an XF86Config which has a X 3.3.6 format rather than the different format for X 4.x.x (Check whether your config file has a Keyboard and pointer section * version 3.3.6* rather than two input device sections *version X 4.x.x*) Lionel --- l <[EMAIL PROTECTED]> wrote: > > an unexpected crash happen in Redhat 7.3, KDE 3. > > Attached is hte /var/log/XFree86.9.log > > > thanks > laurence> > XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 23 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] > Build Host: daffy.perf.redhat.com > > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.9.log", Time: Tue Jul 23 16:23:01 2002 > (++) Using config file: "/tmp/xf86config-TLeCvM" > Parse warning on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM > Ignoring obsolete keyword "LeftAlt". > Parse error on line 36 of section Keyboard in file /tmp/xf86config-TLeCvM > "Meta" is not a valid keyword in this section. > (EE) Problem parsing the config file > (EE) Error from xf86HandleConfigFile() > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.9.log". > Please report problems to [EMAIL PROTECTED] > > __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal server error: no screens found
The error message is telling you that you either didn't configure X after installation or the config file isn't located anywhere that X knows of. (Generally in "/etc/X11/XF86Config", but not always--for windows especially.) You can configure X in a number of different ways, "XFree86 -configure" is probably the easiest. XFree86 -configure When this option is specified, the X server loads all video driver modules, probes for available hardware, and writes out an initial XF86Config(5) file based on what was detected. This option currently has some problems on some platforms, but in most cases it is a good way to bootstrap the configuration process. This option is only available when the server is run as root (i.e., with real-uid 0). http://www.xfree86.org/4.3.0/XFree86.1.html You may also need to use XF86cfg or XF86config. Read their manpages by following the links in the above link. HTH, cyn > -Original Message- > From: Gregory Wolfson [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 03, 2003 9:32 PM > To: [EMAIL PROTECTED] > Subject: [XFree86] Fatal server error: no screens found ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal Server Error in X Server
Your font server has failed. Here is a link to Red Hat documentation about the font server XFS http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/ref-guide/s1-x-fonts.h tml "Service xfs restart" may work, you'll have to be running as root and X should not be running. The latter shouldn't be a problem. :) I'm not a Red Hat user so maybe someone else can help you if you have more questions. Your second choice is to add the font directories to your config file. This is the preferred solution. Add the following lines to the Section "Files" in the XF86Config file: FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" HTH, cyn > -Original Message- > From: Rohit Khanna [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 25, 2003 4:43 PM > To: [EMAIL PROTECTED] > Subject: [XFree86] Fatal Server Error in X Server ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error: no screens found
Mohammed: It seems like there isn't a driver for this chipset. Is it very new? If you look at the stuff at the end, U1 is never mentioned. You might try the vesa driver, which should allow you to use X at some pretty good resolutions, though probably not GL. I'd guess that there might soon be a new driver out to cover the U1, possibly in 4.4.0. If you are feeling bold, you might even try the development drivers, though of course you need to be confident in what you are doing with the computer. -- Act always in accordance with conscience. http://www.hacksaw.org -- http://www.privatecircus.com -- KB1FVD ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error: no screens found
Hi saw thanks for the suggestion, it worked! Mohammed From: Hacksaw <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [XFree86] Fatal server error: no screens found Date: Mon, 17 Nov 2003 20:54:57 -0500 Mohammed: It seems like there isn't a driver for this chipset. Is it very new? If you look at the stuff at the end, U1 is never mentioned. You might try the vesa driver, which should allow you to use X at some pretty good resolutions, though probably not GL. I'd guess that there might soon be a new driver out to cover the U1, possibly in 4.4.0. If you are feeling bold, you might even try the development drivers, though of course you need to be confident in what you are doing with the computer. -- Act always in accordance with conscience. http://www.hacksaw.org -- http://www.privatecircus.com -- KB1FVD ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 _ Sign-up for a FREE BT Broadband connection today! http://www.msn.co.uk/specials/btbroadband ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error while trying to "startx"
Sudip Shrestha 402.301.3940(c) 1017 Fairfax Rd., #17 Bellevue, NE 68005 XFree86.0.log Description: Binary data
Re: [XFree86] Fatal server error : No screens found
On Fri, Jan 16, 2004 at 05:07:55PM +0100, Jean-Luc SAVIO wrote: > Bonjour ! > > I've got some problems with a Linux Slackware 8.0 on a pc Nec with the > same caracteristics than the nec.txt document. > > When I launch the command "startx" a " Fatal server error : No screens found" > occures with the following log file /var/log/XFree86.0.log. > > May somebody help me ? Your using the wrong driver. You should be using the i810 driver and not the cirrus driver. Alan. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error: FreeBSD 5.2.1 HELP, please!
XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 5.2.1 i386 [ELF] Build Date: 13 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers:(--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Mar 8 20:17:30 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Keyboard: CustomKeycode disabled (**) FontPath set to"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (WW) checkDevMem: failed to open /dev/mem (Operation not permitted) (--) Using syscons driver with X support (version 2.0) (--) using VT number 5 Fatal server error: xf86EnableIO: Failed to open /dev/io for extended I/O When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] P.S. I also thought I should add... it worked when I first Installed it, then after rebooting it died :-) _ One-click access to Hotmail from any Web page download MSN Toolbar now! http://clk.atdmt.com/AVE/go/onm00200413ave/direct/01/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error: no screen found
On Sunday 21 March 2004 14:44, Johannes Hauber wrote: > What should I do? Considering the stack of primary devices X seems to find, I think you may want to consider setting the BusID to one of them to force X to choose. Currently it doesn't seem to be able to do that. Try adding BusID"0:8:0" to your Device section, or if that doesn't work, try some of the other IDs mentioned for your primary devices. Regards, Pieter Hulshoff ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error: no screen found
On Sun, 21 Mar 2004, Pieter Hulshoff wrote: > On Sunday 21 March 2004 14:44, Johannes Hauber wrote: > > What should I do? > > Considering the stack of primary devices X seems to find, I think you may want > to consider setting the BusID to one of them to force X to choose. Currently > it doesn't seem to be able to do that. Try adding > BusID"0:8:0" > to your Device section, or if that doesn't work, try some of the other IDs > mentioned for your primary devices. > > Regards, The syntax would be: BusID "PCI:0:8:0" That's worth a try. This is either a mothboard BIOS bug or bus probing bug in XFree86. If /proc/pci reports these redundant S3 devices as well, I would say it's a BIOS bug and you should look into an upgrade. If /proc/pci doesn't show the multiple S3 devices, then perhaps this is a bug that was fixed in XFree86 4.4. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error: No Screens found
The Video card and Monitor are > 4. Operating System "Red Hat Linux release 7.3 (Valhalla)" > 5. Video Hardware "ATI Fire GL E 1,64MB for DELL M992 (19" CRT)" I noticed that I put it wrong in the attached files. Thanks __ Do you Yahoo!? Vote for the stars of Yahoo!'s next ad campaign! http://advision.webevents.yahoo.com/yahoo/votelifeengine/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal server error: no screens found - Reg.
Respected sir, I am new to Linux and when I try to start my x-window using startx, I have been thrown with a hands full of messages. The error message, from /var/log/XFree86.0.log, is makes me panic when i am trying to host startx. If you could give me some suggestions, that i could perform in a sequence, that would be helpful. I would appreciate. Error Message: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Oct 18 16:33:58 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "My Video Card" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc101" (**) XKB: model: "pc101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8060, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card , rev 22 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0596 card 1106, rev 09 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card , rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 1106,3050 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 00:09:0: chip 10ec,8029 card 10ec,8029 rev 00 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 80 (II) PCI: 00:0c:1: chip 13f6,0211 card 13f6,0211 rev 10 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6326 card 1039,6326 rev 0b class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0xc000 - 0xc0ff (0x100) IX[B] [1] -1
Re: [XFree86] Fatal Server Error - No Screens Found
I couldn't find where agpgart is loaded. It needs to be loaded for you video card to work well. [EMAIL PROTECTED] wrote: > When I attempt to configure, I receive an error message about missing > libglide2x.so, not sure if it is related to my main problem of "no screens > found." > > My intuition leads me to suspect this is something to do with my having a > video card in a AGP slot on a motherboard with an integrated video card. > My display works fine in text mode, but I am unable to get into any kind > of graphics mode. When I do startx I get a black screen and only return > to text mode after several CTRL-C attempts. > > My monitor is plugged into the video card in the AGP slot. It works > perfectly fine in Windows XP with my current setup. > > Thanks for any suggestions you may be able to provide. > > Bob King > > ** Contents of Log File Follow ** > > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > _XSERVTransOpen: transport open failed for inet6/subbob.us:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 > > XFree86 Version 4.4.0 > Release Date: 29 February 2004 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: Linux 2.4.7-10custom i686 [ELF] > Current Operating System: Linux subbob.us 2.4.7-10 #1 Thu Sep 6 17:27:27 > EDT 2001 i686 > Build Date: 27 February 2004 > Changelog Date: 29 February 2004 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 29 08:53:42 2005 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Anaconda Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "NVIDIA GeForce 256 (generic)" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "unix/:7100" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.7 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (--) using VT number 7 > > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr > 80 > (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr > 01 > (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr > 80 > (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr > 00 > (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr > 00 > (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr > 80 > (II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr > 00 > (II) PCI: 00:07:0: chip 14f1,1033 card 122d,4034 rev 08 class 07,80,00 hdr > 00 > (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr > 00 > (II) PCI: 01:00:0: chip 1002,4150 card 1545,7c20 rev 00 class 03,00,00 hdr > 80 > (II) PCI: 01:00:1: chip 1002,4170 card 1545,7c21 rev 00 class 03,80,00 hdr > 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -100x - 0x (0x1) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -100x - 0x (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -100x - 0x (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) > (II) Bus 1 I/O range: >
Re: [XFree86] Fatal Server Error - No Screens Found
You're using the wrong driver. You have an ATI card, not an NVIDIA card. In the /etc/X11/XF86Config-4 file, replace Driver "nv" with Driver "ati". Mark. On Sat, 29 Jan 2005 [EMAIL PROTECTED] wrote: > When I attempt to configure, I receive an error message about missing > libglide2x.so, not sure if it is related to my main problem of "no screens > found." > > My intuition leads me to suspect this is something to do with my having a > video card in a AGP slot on a motherboard with an integrated video card. > My display works fine in text mode, but I am unable to get into any kind > of graphics mode. When I do startx I get a black screen and only return > to text mode after several CTRL-C attempts. > > My monitor is plugged into the video card in the AGP slot. It works > perfectly fine in Windows XP with my current setup. > > I'm running with a dual boot system - linux and Win XP - so I am certain > the monitor/video card combo works in Windows. > > Thing's I've tried already: > > -- searching the XFree86 archive for libglide2x.so issues - didn't find > anything that helped with my situation > > -- copying libglide3.so to libglide2x.so - didn't work, was not able > to "fool" the system this way > > -- downloading and installing a libglide2 RPM - would not install, there > were conflicts with other installed RPMs > > -- removing libglide3 RPM - could not do it, too many dependencies > > -- forced installation of the libglide2 RPM - still receive the > libglide2x.so error message > > -- plugging a second monitor into the port connected to the integrated > video card on the motherboard - no change > > Thanks for any suggestions you may be able to provide. > > Bob King > > ** Contents of Log File Follow ** > > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > _XSERVTransOpen: transport open failed for inet6/subbob.us:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 > > XFree86 Version 4.4.0 > Release Date: 29 February 2004 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: Linux 2.4.7-10custom i686 [ELF] > Current Operating System: Linux subbob.us 2.4.7-10 #1 Thu Sep 6 17:27:27 > EDT 2001 i686 > Build Date: 27 February 2004 > Changelog Date: 29 February 2004 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 29 08:53:42 2005 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Anaconda Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "NVIDIA GeForce 256 (generic)" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "unix/:7100" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.7 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (--) using VT number 7 > > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr > 80 > (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr > 01 > (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr > 80 > (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr > 00 > (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr > 00 > (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr > 80 > (II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr > 00 > (II) PCI: 0
Re: [XFree86] Fatal Server Error - No Screens Found
Mark - Thank you many times over. That simple change of "nv" to "ati" made it work. Bob >You're using the wrong driver. You have an ATI card, not an > NVIDIA card. In the /etc/X11/XF86Config-4 file, replace Driver "nv" > with Driver "ati". ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal server error : out of memory
On Thu, 14 Apr 2005, Hubert Lemoigne wrote: For my old computer, I have a Linux dual boot, and I can choose between : 1 - Suse 7.0 ( kernel 2.2.16, libc 6.1.3 and XFree 4.0.2 ) 2 - Slackware 9.1 ( kernel 2.4.22, glibc 2.3.2, XFree 4.3.0 ) The PC hardware contains : - Intel Pentium 133 Mhz - Ram 64 MBytes - Graphics card : Viewtop PCI ( Tseng ET4000W32, 2 MBytes Video Ram ). I had manually configured the XF86Config file ( see attached files ) ; for each OS, I have a copy of the same file in the directory : /etc/X11/ When I'm under Suse7.0, I can start the X server ( startx ) ( see Suse_XFree86.0.log ); but with Slackware9.1 the startx command fail with : Fatal server error out of memory XIO : fatal IO error 104 ( connection reset by peer ) on X server ":0.0" after 0 requests ( 0 known processed ) with 0 events remaining. ( see Slackware_XFree86.0.log ) 3 attached files : - XF86Config - Suse_XFree86.0.log - Slackware_XFree86.0.log Can you tell me where is the bad configuration and how I can run the X server under Slackware. The latest fix for this problem is in XFree86 4.5.0. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax:1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +---+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply| | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Server Error: No Screens Found
On 9/3/05, P3 <[EMAIL PROTECTED]> wrote: > I recently installed Turbolinux. When I try to start it, log-in, and type > startx, i get an error than no screens are found. Unfortunatley, I've been > unable to access my files that have the complete error. > > Please let me know if you need more info so I can try to find it. Some more information about the type of machine (what kind of video card?) and the version of TurboLinux (what version of XFree86?) would be helpful. What if you type "X -configure" and follow the resulting instructions? -Andy ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Server Error In XFree 4.2.0 (RedHat-8.0)
To whom it may concern, I got the following answers when trying to configure a graphics card under the specified XFree version: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-19.8.0 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Dec 12 04:37:40 EST 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jan 10 08:52:58 2003 List of video drivers: atimisc radeon r128 mga glint nv tga s3 s3virge sis rendition neomagic i740 tdfx savage cirrus tseng trident chips apm fbdev i128 ati i810 ark cyrix siliconmotion vesa vga v4l Fatal server error: XFree86 has found a valid card configuration. Unfortunately the appropriate data has not been added to xf86PciInfo.h. Please forward 'scanpci -v' output to XFree86 support team. When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] -- The Answer from scanpci -v will be added later. The graphics card used is a S3 Pro Savage 8 int GFX (internal graphics on ASRock K7VM2 Micro ATX) pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x5333 device 0x8d04 S3 Device unknown CardVendor 0x5333 card 0x8d04 (S3, Card unknown) STATUS0x0230 COMMAND 0x0007 CLASS 0x03 0x00 0x00 REVISION 0x00 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 BASE0 0xdfe8 addr 0xdfe8 MEM BASE1 0xd008 addr 0xd000 MEM PREFETCHABLE BASEROM 0xdfe7 addr 0xdfe7 not-decode-enabled MAX_LAT 0xff MIN_GNT 0x04 INT_PIN 0x01 INT_LINE 0x0b BYTE_00x03 BYTE_1 0x00 BYTE_2 0x8074640 BYTE_3 0x If you need further information do not hesitate and contact me. Sincerly Heiko Kopp -- Dipl.-Inf. Heiko Kopp Tel.: +49 381 498 2360 University of Rostock Fax : +49 381 498 3440 Department of Computer Science Chair of Computer Architecture Albert-Einstein-Str. 21 18059 Rostock ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal server error: server must be suid root
I read the responses that I got but they didnt help me much. I know chmod but what file am I supposed to check the permissions for and what should i set the permissions to? ( i already checked /usr/X11R6/bin and i dont think thats the problem but i may be wrong) thanks for the help! -tim ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
