Re: export question

I see that all the time where there is a difference between the export and import totals - sometimes 2-3 objects (or more) difference - sometimes occupancy totals varying a little. A long time ago when I first saw such a difference, I reran the export with mergefilespace and it still didn't

export question

I just finished exporting a linux server changing hardware and decommissioning a tsm server. The original node on server x has 4,000,798 objects. The import on server y has 4,000,797 objects. I calculated the number with the following sql statement Select sum(num_fules) from occupancy where

Re: Question on Replication: unsuccessful replication due to sessions terminated by admin

Hi, ok, i need to share some additional information :-) first i observed a huge number of dropped packages on one server. so we did some tests including iperf which showed nearly the physical bandwidth. we also took a tcpdump and handed it to our network guys who didn't see anything giving a

Re: Question on Replication: unsuccessful replication due to sessions terminated by admin

Did you use something like iperf with a long and heavy load? a bad nic or driver might cause this, so it might still be the network. On Mon, May 13, 2019 at 4:15 PM Bjørn Nachtwey wrote: > Hi all, > > we planned to switch from COPYPOOL to Replication for having a second > copy of the data,

Question on Replication: unsuccessful replication due to sessions terminated by admin

Hi all, we planned to switch from COPYPOOL to Replication for having a second copy of the data, therefore we bought a new server that should become the primary TSM/ISP server and then make the old one holding the replicates. what we did: we started by exporting the nodes, which worked well.

Re: Re: dsm.sys question

s >> >> Steve >> >> -Original Message- >> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of >> Skylar Thompson >> Sent: Thursday, 28 February 2019 6:10 AM >> To: ADSM-L@VM.MARIST.EDU >> Subject: Re: [ADSM-L

Re: dsm.sys question

inal Message- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > Skylar Thompson > Sent: Thursday, 28 February 2019 6:10 AM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] dsm.sys question > > Hi Rick, > > I'm not aware of a mechanism that a

Re: dsm.sys question

Steve -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Skylar Thompson Sent: Thursday, 28 February 2019 6:10 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] dsm.sys question Hi Rick, I'm not aware of a mechanism that allows one to do

Re: dsm.sys question

Hi Rick, I'm not aware of a mechanism that allows one to do that with dsmc/dsm.sys, but Puppet does have the ability to include arbitrary lines in a file, either via a template or directly in a rule definition. Another option would be to use server-side client option sets:

dsm.sys question

Hello, Our Unix team in implementing a management application named Puppet. They are running into a problem using Puppet to setup/maintain the TSM client dsm.sys files. They create/maintain the dsm.sys as per a template of some kind. If you change a dsm.sys with a unique option, it gets

Re: Question on switching server roles in replication

o REPLMODE=RECEIVE -Rick Adamson -Original Message- From: ADSM: Dist Stor Manager On Behalf Of Nachtwey, Bjoern Sent: Thursday, January 31, 2019 5:07 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Question on switching server roles in replication * This email originated outside of the or

AW: [ADSM-L] Question on switching server roles in replication

Hi Francisco, great. Thanks! Bjørn -Ursprüngliche Nachricht- Von: ADSM: Dist Stor Manager Im Auftrag von Francisco Molero Gesendet: Donnerstag, 31. Januar 2019 11:43 An: ADSM-L@VM.MARIST.EDU Betreff: Re: [ADSM-L] Question on switching server roles in replication Hi , you can

Question on switching server roles in replication

Dear all, I set up a new server for one of our customers and will use the old server and library as target for replication. First I tried to export the data, but this takes too long due to the amount of data. So my next approach is to set up replication from the existing server to the new one

Re: archive / hsm for windows question

Got it. Thanks. All are restored. -Original Message- From: ADSM: Dist Stor Manager On Behalf Of Stefan Bender Sent: Friday, September 28, 2018 10:38 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] archive / hsm for windows question Hi all, dsmclc is also in version 6.3 able

Re: archive / hsm for windows question

Stuttgart, HRB 243294 From: Efim To: ADSM-L@VM.MARIST.EDU Date: 25/09/2018 19:51 Subject: Re: [ADSM-L] archive / hsm for windows question Sent by:"ADSM: Dist Stor Manager" Hi, As I know you can recall HSM files only using HSM client. In version 7.1.X y

Re: archive / hsm for windows question

Hi, As I know you can recall HSM files only using HSM client. In version 7.1.X you can use command dsmclc retrieve for it. Don't know about 6.3. Example: http://www-01.ibm.com/support/docview.wss?uid=swg21580766 Efim > 25 сент. 2018 г., в 20:29, Lee, Gary написал(а): > > I have a server which

archive / hsm for windows question

I have a server which is running hsm for windows 6.3. Folks have deleted the stub files for much of their data. I need to restore, as we are terminating tsm services for that data center. Is there a way to retrieve the archives avoiding the hsm client, just use the tsm client? This would let

SnapDiff threading question

We have 6 Netapp fileshares that have a small number of large files but TB daily change rates. When Snapdiff runs, we are not seeing the number of sessions we expect after setting resourceutilization=10. Is this due to how TSM is receiving the changed file list from the Netapp? Would we be

Re: Question about moving data to another stg pool directory container

Follow me on: Twitter, developerWorks, LinkedIn -Original Message- From: Remco Post [mailto:r.p...@plcs.nl] Sent: Thursday, February 1, 2018 9:27 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Question about moving data to another stg pool directory container Hi Robert, you can’t. Maybe

Re: Question about moving data to another stg pool directory container

Hi Robert, you can’t. Maybe you could work around that: setup replication to another (temp) server replicate the node delete the replstate from the node on both ends del file on the first server update the node/domain/mgmtclass to store the data in the desired pool replicate back untested,

Question about moving data to another stg pool directory container

Hi to all Previously Storage container , I used the process of move nodedata to move nodenames from storage to another storage. With container storage pool is not allowed , anybody can point to another command to move nodename to another storage pool ( both storage pools are Directory

Re: Select question

EDU] On Behalf Of Marc Lanteigne Sent: Wednesday, 10 January 2018 11:07 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Select question Hello, There's that exact query on Thobias: http://thobias.org/tsm/sql/#toc17 - Thanks, Marc... M

Re: Select question

to 16:00 Eastern Follow me on: Twitter, developerWorks, LinkedIn -Original Message- From: rou...@univ.haifa.ac.il [mailto:rou...@univ.haifa.ac.il] Sent: Wednesday, January 10, 2018 4:16 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Select question Hi to alll Try to figure how to run

Re: Select question

On 10.1.2018. 9:11, rou...@univ.haifa.ac.il wrote: > Hi to alll > > Try to figure how to run a select to get for nodename the parameter “Days > since last access” greater than 3 months > > When I run the q node ides got > > Protect: ADSM2>q node ides > > Node Name Platform

Select question

Hi to alll Try to figure how to run a select to get for nodename the parameter “Days since last access” greater than 3 months When I run the q node ides got Protect: ADSM2>q node ides Node Name Platform Policy Domain Days Since Days Since Locked?

Re: DBS vault volume question

ult volume question Hi Robert, As Stefan said, DRM (Disaster Recovery Manager) should be able to handle all the media state changes automatically. If, otherwise, you just want to stop using DRM and recover all the tapes, the problem is that it's not possible to delete the last db snaps

Re: DBS vault volume question

-L@VM.MARIST.EDU] On Behalf Of Stefan Folkerts Sent: Sunday, November 12, 2017 14:50 To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] DBS vault volume question Hi Robert, That's not the way you get vault tape back from the vault. DR will put vault tapes in vault retrieve for you, you don't have

Re: DBS vault volume question

Hi Robert, That's not the way you get vault tape back from the vault. DR will put vault tapes in vault retrieve for you, you don't have to do that by yourself, it's will adhere to this setting (

DBS vault volume question

Hi to all I run the query: q drmedia * source=dbs Got this output Volume Name State Last Update Date/Time Automated LibName - --- 55L5

Re: Question on Collocation

Skylar, Thanks! I am going to try this. I appreciate your input! Jennifer -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Skylar Thompson Sent: Thursday, November 09, 2017 8:12 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Question

Re: Question on Collocation

Thanks Marc! Very helpful!! -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Marc Lanteigne Sent: Thursday, November 09, 2017 8:15 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Question on Collocation Hi Jennifer, > I removed the n

Re: Question on Collocation

vember 03, 2017 3:07 PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] Question on Collocation > > Hi Jennifer, > > The backup always only applies to the filesystem backup, not systemstate. > You???ll have to change the mode of the systemstate backup to get a full. > >

Re: Question on Collocation

astern Follow me on: Twitter, developerWorks, LinkedIn -Original Message- From: Drammeh, Jennifer C [mailto:jdram...@u.washington.edu] Sent: Thursday, November 9, 2017 12:00 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Question on Collocation Marc, I removed the node from the collo

Re: Question on Collocation

a FULL new backup of the entire system. Thanks! Jennifer -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Marc Lanteigne Sent: Friday, November 03, 2017 3:07 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Question on Collocation Hi Jennifer

Re: Question on Collocation

PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] Question on Collocation > > Hi Jennifer, > > Do you have client-side compression enabled? I'm not familiar with what the > GUI reports, but dsmc will show this in the "Objects compressed by" > line. > > On 1

Re: Question on Collocation

] Question on Collocation Hi Jennifer, Do you have client-side compression enabled? I'm not familiar with what the GUI reports, but dsmc will show this in the "Objects compressed by" line. On 11/03/2017 02:06 PM, Drammeh, Jennifer C wrote: > I use collocation and I have a node whe

Re: Question on Collocation

not in a collocation group are collocated by node. Marc... Sent from my iPhone using IBM Verse On Nov 3, 2017, 6:11:07 PM, jdram...@u.washington.edu wrote: From: jdram...@u.washington.edu To: ADSM-L@VM.MARIST.EDU Cc: Date: Nov 3, 2017, 6:11:07 PM Subject: [ADSM-L] Question on Collocation I

Re: Question on Collocation

Hi Jennifer, Do you have client-side compression enabled? I'm not familiar with what the GUI reports, but dsmc will show this in the "Objects compressed by" line. On 11/03/2017 02:06 PM, Drammeh, Jennifer C wrote: > I use collocation and I have a node where the System Admin has requested that >

Question on Collocation

I use collocation and I have a node where the System Admin has requested that his data from a particular node be isolated on tapes by itself. I created a collocation group and have associated this one node with the new group. This node had previously been backing up to a different collocation

Re: tsm ops center 7.1.7 question

That got it. Thanks. Wasn't clear from what I had read. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of J. Pohlmann Sent: Thursday, September 28, 2017 11:11 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] tsm ops center 7.1.7 question

Re: tsm ops center 7.1.7 question

question Since I don't use the OPS center, not sure if this is correct. From this page: https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.7/srv.install/c_oc_inst_admin_ids_and_passwords.html *When you initially configure the hub server, an administrator ID named IBM-OC-server_name

Re: tsm ops center 7.1.7 question

with system authority on the hub server and is associated with the initial password that you specify.* On Thu, Sep 28, 2017 at 10:54 AM, Lee, Gary <g...@bsu.edu> wrote: > Just installed ops center 7.1.7. > > First question, what is the user id used to log in for the first time

tsm ops center 7.1.7 question

Just installed ops center 7.1.7. First question, what is the user id used to log in for the first time to configure. Looked through the server install guide, don't see it listed. The install asked for a password, but never hinted at the user id to go with it. Thanks for the assistance.

Re: Mountpoints question

tember 7, 2017 5:28 PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] Mountpoints question > > Robert, > > The keep mount option is only applicable if you migrate the data to a > sequential volume *after* you store it in the diskpool, so with your direct > to tape setup he

Re: Mountpoints question

question Robert, The keep mount option is only applicable if you migrate the data to a sequential volume *after* you store it in the diskpool, so with your direct to tape setup here it doesn't do anything. The session will hold a single drive for the entire duration of its backup session. On Thu

Re: Mountpoints question

ne > De : Stefan Folkerts <stefan.folke...@gmail.com> > Date : 07/09/2017 15:41 (GMT+02:00) > À : ADSM-L@VM.MARIST.EDU > Objet : Re: [ADSM-L] Mountpoints question > > Robert, > > >09/05/2017 16:44:17 ANR0539W Transaction failed for session 20900 for

Re: Mountpoints question

ADSM-L] Mountpoints question Robert, >09/05/2017 16:44:17 ANR0539W Transaction failed for session 20900 for > node IIP DM-LAB-FISH. This node has exceeded its maximum number of > mount points. (SESSION: 20900) You stated that the default resource util is 2, you also stated that "

Re: Mountpoints question

t; > > > -Original Message- > > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > > Stefan Folkerts > > Sent: Thursday, September 7, 2017 8:49 AM > > To: ADSM-L@VM.MARIST.EDU > > Subject: Re: [ADSM-L] Mountpoints question > >

Re: Mountpoints question

node : Keep Mount Point?: TO YES ( Now is NO) > > Regards > > Robert > > > > -Original Message- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > Stefan Folkerts > Sent: Thursday, September 7, 2017 8:49 AM > To: ADSM-L@VM.MARIST.EDU >

Re: Mountpoints question

Keep Mount Point?: TO YES ( Now is NO) Regards Robert -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Stefan Folkerts Sent: Thursday, September 7, 2017 8:49 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Mountpoints question It migh

Re: Mountpoints question

It might seem pretty obvious but you need to set resourceutilization to 1 and not 3. Also, the amount of mountpoints doesn't equal the amount of tapes a backup can use, it limits the amount of concurrent mountpoints a backup can use. On Thu, Sep 7, 2017 at 7:00 AM, rou...@univ.haifa.ac.il <

Mountpoints question

Hi to all Want to backup directly to LTO7 tapes and only in one tape till is full. When my maxnummp is 1 for the node name got a lot of warning as: 09/05/2017 16:44:17 ANR0539W Transaction failed for session 20900 for node IIP DM-LAB-FISH. This node has exceeded its maximum number of

Question about Operation Center

Hi to all Want to be on the safe side , can I upgrade my Operation center Version 8.1.1.100 stand alone on a TSM server 8.1.1.0 Best Regards Robert

Re: question about eventlogging

that the receiver is active is not important, if all events are disabled to the nteventlog, nothing gets logged. > On 30 Aug 2017, at 09:01, rou...@univ.haifa.ac.il <rou...@univ.haifa.ac.il> > wrote: > > Hello > > A quick question I run those commands on my T

question about eventlogging

Hello A quick question I run those commands on my TSM server: end eventlogging nteventlog disable events ntevenlog info,warning Check with q status: Active Receivers: CONSOLE ACTLOG But after a reboot , I get: Active Receivers: CONSOLE ACTLOG NTEVENTLOG Maybe I can add

Re: Question adding new scratch at library

...@univ.haifa.ac.il Sent: Tuesday, 15 August 2017 3:10 PM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Question adding new scratch at library Hi to all A quick question about adding new scratch's on a TS3200 Library (SCSI). What will be the correct or more efficient command to run label libv LTO7LIB

Question adding new scratch at library

Hi to all A quick question about adding new scratch’s on a TS3200 Library (SCSI). What will be the correct or more efficient command to run label libv LTO7LIB checkin=scratch search=bulk labelsource=barcode volrange=$1,$2 overwrite=yes or checkin libv LTO7LIB status=scratch search=bulk

Full VM Instant Restore question

Hi Guys Just want to know if after the process of Full VM Instant Restore ( process run successfully) I need to see in Instant access / restore status windows in Web gui , the machine waiting for dismount Tied to check via the gui an via console with command:q vm * -vmrest= all

Re: restore backupset question forgive the repeat

anager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Giacomo Testa Sent: Wednesday, June 28, 2017 5:02 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] restore backupset question forgive the repeat Correction: it should be .bat and not .mac Obj=c:\restore-it.bat restore-it.bat: dsmc restore bac

Re: restore backupset question forgive the repeat

como Testa [mailto:giacomo.te...@gmail.com] Sent: Wednesday, June 28, 2017 10:52 To: 'ADSM: Dist Stor Manager' <ADSM-L@VM.MARIST.EDU> Subject: RE: [ADSM-L] restore backupset question forgive the repeat Hi, I'm not sure, but I think that a schedule with Option=-asnode doesn't work together w

Re: restore backupset question forgive the repeat

M.MARIST.EDU Subject: [ADSM-L] restore backupset question forgive the repeat The screen reader did not tell me certain messages were highlighted, so an answer to this was deleted so asking again with more information. Tsm server 7.1.7. Two tsm windows clients, restore-tem 7.1.4 Rcipserver 6.

restore backupset question forgive the repeat

The screen reader did not tell me certain messages were highlighted, so an answer to this was deleted so asking again with more information. Tsm server 7.1.7. Two tsm windows clients, restore-tem 7.1.4 Rcipserver 6.3.2. Rcipserver has a backupset Want to restore files to restore-temp. Proxy

client side encryption question

We are being asked about encrypting our backups. Looking at client side encryption, if they want to encrypt all contents of a drive under windows, is Include.encrypt c:\...\* The best way? Also, what about a bare metal restore of an encrypted client? Using encryptkey=generate Will doing a

Re: Script question

According to rou...@univ.haifa.ac.il > Hi All > > Need a little help with this script > > select cast(node_name as varchar(20)) as "Nodebane" , cast(TCP_ADDRESS as > varchar(15)) as "IP" , cast(CLIENT_OS_NAME as varchar(35)) as " OS Name" , > cast(CLIENT_SYSTEM_ARCHITECTURE as varchar(4)) as

Script question

Hi All Need a little help with this script select cast(node_name as varchar(20)) as "Nodebane" , cast(TCP_ADDRESS as varchar(15)) as "IP" , cast(CLIENT_OS_NAME as varchar(35)) as " OS Name" , cast(CLIENT_SYSTEM_ARCHITECTURE as varchar(4)) as "BIT" , cast(APPLICATION_VERSION as varchar(2))

Re: question about fecapacity field in filespaces table

Hi Gary, FE stands for Front End. It's used for Front End Capacity licensing evaluation. -- Best regards / Cordialement / مع تحياتي Erwann SIMON - Mail original - De: "Gary Lee" <g...@bsu.edu> À: ADSM-L@VM.MARIST.EDU Envoyé: Vendredi 17 Mars 2017 15:56:24 Objet: [ADSM-L

question about fecapacity field in filespaces table

I am not sure what this field is supposed to signify. In the following extract, I did a Select * from filespaces where node_name='PRODBANDB2' At the bottom of the extract, I actually calculated the value by multiplying capacity by pct_util, (correcting for the fact that it is a percentage). The

Re: Question about Aspera FASP

ce have > to be Linus (MUST) , but did the target too ? Meaning Aspera FASP have to > be install at both servers (Source / Target) to works ? > > Thanks Again > > Robert > > > Hi All > > A quick question did anybody know if the Module IBM Spectrum Protect with > As

Question about Aspera FASP

Hi All Thanks to all for the answers….. So this feature is working only on Linux TSM Server, so the source have to be Linus (MUST) , but did the target too ? Meaning Aspera FASP have to be install at both servers (Source / Target) to works ? Thanks Again Robert Hi All A quick question

Re: Question about Aspera FASP

:06 AM Subject:Re: [ADSM-L] Question about Aspera FASP Sent by:"ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> Hi, as far as I know... Linux only... Chavdar On Sunday, 8 January 2017, rou...@univ.haifa.ac.il <rou...@univ.haifa.ac.il> wrote: > Hi All &

Re: Question about Aspera FASP

Hi, as far as I know... Linux only... Chavdar On Sunday, 8 January 2017, rou...@univ.haifa.ac.il <rou...@univ.haifa.ac.il> wrote: > Hi All > > A quick question did anybody know if the Module IBM Spectrum Protect with > Aspera FASP ( IBM Spectrum Protect High Speed Data

Question about Aspera FASP

Hi All A quick question did anybody know if the Module IBM Spectrum Protect with Aspera FASP ( IBM Spectrum Protect High Speed Data Transfer), is also available for TSM Server Windows 2012 64B . I only find a package for TSM Server Linux ….. Best Regards Robert Ouzen Haifa University

Re: TSM Migration Question

-L] TSM Migration Question Ricky, could you please send the output of the following commands: 1. Q MOUNT 2. q act begint=-12 se=Migration Also, the only way that the stgpool would migrate back to itself would be if there was a loop, meaning your disk pool points to the tape pool as the next

Re: TSM Migration Question

ices Offerings From: "Plair, Ricky" <rpl...@healthplan.com> To: ADSM-L@VM.MARIST.EDU Date: 09/21/2016 08:57 AM Subject:Re: [ADSM-L] TSM Migration Question Sent by:"ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> Nothing out of the norm

Re: TSM Migration Question

Is it migrating or reclaiming at 70% as defined. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Plair, Ricky Sent: Wednesday, September 21, 2016 8:50 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: TSM Migration Question Nothing out of the normal

Re: TSM Migration Question

, 2016 11:35 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] TSM Migration Question The only oddity I see is that DDSTGPOOL4500 has a NEXTSTGPOOL of TAPEPOOL. Shouldn't cause any problems now since utilization is 0% but would get triggered once you hit the HIGHMIG threshold. Is there anything

Re: TSM Migration Question

;Auto-copy Mode: Client > Contains Data Deduplicated by Client?: No > > > -Original Message- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > Skylar Thompson > Sent: Wednesday, September 21, 2016 11:19 AM > To: ADSM-

Re: TSM Migration Question

nesday, September 21, 2016 11:19 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] TSM Migration Question Can you post the output of "Q STG F=D" for each of those pools? On Wed, Sep 21, 2016 at 02:33:42PM +, Plair, Ricky wrote: > Within TSM I am migrating an old storage pool on a DD42

Re: TSM Migration Question

Can you post the output of "Q STG F=D" for each of those pools? On Wed, Sep 21, 2016 at 02:33:42PM +, Plair, Ricky wrote: > Within TSM I am migrating an old storage pool on a DD4200 to a new storage > pool on a DD4500. > > First of all, it worked fine yesterday. > > The nextpool is correct

TSM Migration Question

Within TSM I am migrating an old storage pool on a DD4200 to a new storage pool on a DD4500. First of all, it worked fine yesterday. The nextpool is correct and migration is hi=0 lo=0 and using 25 migration process, but I had to stop it. Now when I restart it the migration process it is

Backup image question

Hi to all I want to make a backup image of a drive , we not need to backup anymore. My question is if it’s a limit of the image created ? Windows drive , backup image P: tsm: ADSM2>q occ vod4 Node Name Type Filespace FSID Storage Number of Physi

Re: VM snapshot question

: [ADSM-L] VM snapshot question HI to all A quick question before I investigate , using TSM for VE V7.1.4 to back up our VMware environment . I wonder if I have a VM with on it several snapshot , if after a VE backup and restoring the VM in alternate place. What will be the status

Re: Journaling question

>I don't believe you can use journal-based-backup for network connected file systems. Very true, the journaling agent only works on local supported filesystems because it is not aware of writes to remote filesystems so it can't add them to the journal of files to backup. I would advice to use a

Re: Journaling question

Michael, I don't believe you can use journal-based-backup for network connected file systems. If you want to avoid incremental backups walking a NAS filesystem looking for changed files, you can look into NetApp (which TSM supports with snapdiff incrementals) and IBM Sonas. Snapdiff uses a

Journaling question

All, Does anyone know a way to use journaling in TSM on a networked file system. If you go through the wizard, you can select to journal the local file systems, but there is no option to journal network connected file systems. We can back them up by specifying them in the opt file as: DOMAIN

Re: query auditocc question

iginal Message- From: Paul_Dudley [mailto:pdud...@anl.com.au] Sent: Thursday, 28 July 2016 10:11 AM To: 'ADSM: Dist Stor Manager' Subject: RE: query auditocc question Thanks. I ran this command and it ran successfully and provided me with a list of totals. However they are a lot higher than wh

Re: Move Container question

08/06/2016 07:07 PM Subject:[ADSM-L] Move Container question Sent by:"ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> Hi to all Can anybody give me more information of the process for Storage of type DIRECTORY ANR0986I Process 263 for Move Container

Move Container question

Hi to all Can anybody give me more information of the process for Storage of type DIRECTORY ANR0986I Process 263 for Move Container (Automatic) running in the BACKGROUND processed 73,945 items for a total of 10,705,469,440 bytes with a completion state of

Re: query auditocc question

sage- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of David Ehresman Sent: Thursday, 28 July 2016 10:57 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] query auditocc question Paul, You are right. All of my data is in primary storage pools so I no longer worry about

Re: query auditocc question

re POOLTYPE='PRIMARY' ) group by node_name David -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Paul_Dudley Sent: Wednesday, July 27, 2016 8:11 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] query auditocc question Thanks. I ran thi

Re: query auditocc question

uery auditocc question Perhaps the following query would give you better data: select node_name,sum(reporting_mb) as "TOTAL_OCCUPANCY" from occupancy group by node_name -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Paul_Dudley Sent: Tu

Re: query auditocc question

, 27 July 2016 2:33 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] query auditocc question Paul, The metrics displayed by Q AUDITOCC are updated by AUDIT LICENSE; not in real time. ..Paul (sent from my iPhone) On Jul 26, 2016, at 9:37 PM, Paul_Dudley <pdud...@anl.com.au<mailto:pdud...@

Re: query auditocc question

2016 9:35 PM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] query auditocc question To keep track of our primary storage usage, on a weekly basis I run the following command: query auditocc pooltype=primary For one of the nodes - an SQL server - it is reporting that the backup storage u

Re: query auditocc question

Paul, The metrics displayed by Q AUDITOCC are updated by AUDIT LICENSE; not in real time. ..Paul (sent from my iPhone) On Jul 26, 2016, at 9:37 PM, Paul_Dudley > wrote: To keep track of our primary storage usage, on a weekly basis I run the

query auditocc question

To keep track of our primary storage usage, on a weekly basis I run the following command: query auditocc pooltype=primary For one of the nodes - an SQL server - it is reporting that the backup storage used is 7Tb. However knowing the size of the databases on that server and the number of

Re: Question about restore db

As I remember you can do in both ways ... Regards El 9 jul. 2016 21:09, "Robert Ouzen" <rou...@univ.haifa.ac.il> escribió: > Hello All > > A quick question about restore db . I f I made the backup db with TSM > server version 7.1.5.200. > > Can I do a rest

Question about restore db

Hello All A quick question about restore db . I f I made the backup db with TSM server version 7.1.5.200. Can I do a restore db if I previously install TSM server 7.1.6 ? Or I need first to install TSM server version 7.1.5.200 , made the restore db and after it update version to 7.1.6

VM snapshot question

HI to all A quick question before I investigate , using TSM for VE V7.1.4 to back up our VMware environment . I wonder if I have a VM with on it several snapshot , if after a VE backup and restoring the VM in alternate place. What will be the status of this machine meaning If I will see

Re: Aw: Re: [ADSM-L] postschedulecmd question

6-06-20 04:53:29: > From: John Keyes <ra...@gmx.net> > To: ADSM-L@VM.MARIST.EDU > Date: 2016-06-20 05:17 > Subject: Aw: Re: [ADSM-L] postschedulecmd question > Sent by: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> > > I see, thank you. > It's a bummer

Aw: Re: [ADSM-L] postschedulecmd question

e.gov> > An: ADSM-L@VM.MARIST.EDU > Betreff: Re: [ADSM-L] postschedulecmd question > > Hi John, > > We use these commands sparingly so I am just reading the documentation. The > way I read the description, it seems as if the postschedulecmd will run > regardless of the return

  1   2   3   4   5   6   7   8   9   10   >