Yep
On Thu, Apr 22, 2021, 8:19 PM Adam Moffett wrote:
> There seem to be a lot of colorful tower people.
> On 4/22/2021 8:22 PM, Jaime Solorza wrote:
>
> When I had my company and got a large tower erection contract, i hired two
> new guys one of them had worked on towers 10 years and was
There seem to be a lot of colorful tower people.
On 4/22/2021 8:22 PM, Jaime Solorza wrote:
When I had my company and got a large tower erection contract, i hired
two new guys one of them had worked on towers 10 years and was
very knowledgeable.
Few first tower builds , nada, no problems.
When I had my company and got a large tower erection contract, i hired two
new guys one of them had worked on towers 10 years and was very
knowledgeable.
Few first tower builds , nada, no problems. One of the crews is working in
Uvalde, Texas. Get a call from foreman...this guy in his 30s is
Good riddance probably, the longer a toxic employee stays the worst it gets
usually, and it spreads to less toxic folks.
> On Apr 22, 2021, at 3:49 PM, Chuck McCown via AF wrote:
>
> He had worked for about 3 months. Learned his job quickly. High performer.
> But he started acting like a
He had worked for about 3 months. Learned his job quickly. High performer.
But he started acting like a boss, chewing coworkers ass etc. Damaged a
vehicle and acted like it was no big deal. Got a write up. Started having
absentee issues.
Today his supervisor tried to administer some
One of the new managers at water company used to work for an outfit that
does fiber.
All of sudden...that IT company is bidding on SCADA projects.
We have done several fiber projects for them at waste water plants which
have a ton of EMI and RFI noise so Ethernet cabling had a lot of issues.
All
Lol...i was alluding to Sam Lambie
On Thu, Apr 22, 2021, 3:11 PM James Howard wrote:
> Here’s the correct syntax:
>
>
>
> It's a short drive for me versus Dallas, which, I does not like it Sam I
> am.
>
>
>
>
>
>
>
> *From:* AF *On Behalf Of * Jaime Solorza
> *Sent:* Thursday, April 22, 2021
Re: [AFMUG] Fiber optic training and certification classes in Albuquerque areaI
agree, they have pretty much any cert you can ask for when it comes to fiber.
From: Mark - Myakka Technologies
Sent: Thursday, April 22, 2021 12:52 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG]
Here's the correct syntax:
It's a short drive for me versus Dallas, which, I does not like it Sam I am.
From: AF On Behalf Of Jaime Solorza
Sent: Thursday, April 22, 2021 1:29 PM
To: AnimalFarm Microwave Users Group
Subject: [AFMUG] Fiber optic training and certification classes in
Ok thanks..
On Thu, Apr 22, 2021, 2:59 PM Mark - Myakka Technologies
wrote:
> Jaime,
>
> Our class had 6 people in it. Only two of us from our company. Other 4
> were for different companies. Noe is the time to do it, being they are
> keeping class size down. I think they have some online
Title: Re: [AFMUG] Fiber optic training and certification classes in Albuquerque area
Jaime,
Our class had 6 people in it. Only two of us from our company. Other 4 were for different companies. Noe is the time to do it, being they are keeping class size down. I think they have some online
We are only two and many of these outfits need 6 to 8 students..
We know how to do it...but need "Certification" for some bids...
On Thu, Apr 22, 2021, 12:53 PM Mark - Myakka Technologies
wrote:
> Jaime,
>
> If you're looking for an official class, try https://lightbrigade.com/.
>
> I just
No.. fiber doesn't work unless you log in and tell it to.
On 4/22/21 3:47 PM, Adam Moffett wrote:
And if you have both plugged into a switch, does recovery mode create a
loop and blow up the whole site? Just wondering.
On 4/22/2021 2:40 PM, Josh Luthman wrote:
Hmm that I did not test.
And if you have both plugged into a switch, does recovery mode create a
loop and blow up the whole site? Just wondering.
On 4/22/2021 2:40 PM, Josh Luthman wrote:
Hmm that I did not test. That's kind of annoying they could do that
in recovery mode but not production mode. May limit the
Title: Re: [AFMUG] Fiber optic training and certification classes in Albuquerque area
Jaime,
If you're looking for an official class, try https://lightbrigade.com/.
I just finished a two day OTDR class with them. Took a basic fiber class with them about 10 years ago. They do classes all
Hmm that I did not test. That's kind of annoying they could do that in
recovery mode but not production mode. May limit the pps/overall capacity
if that were the case?
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 22, 2021
Depends what you want to know. Maybe you could head up to Chuck's place
and he'd show you around?
You're welcome to come up this way, too, but it's way farther than Dallas :)
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 22,
Does anyone know of a place? Sam i Am Lambie?
It's a short drive for me versus Dallas, which, i don't like anyways.
Thanks
Jaime
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
I was able to get to it over the fiber too on the bench. It's like they
were bridged in recovery mode.
On 4/22/2021 11:55 AM, Josh Luthman wrote:
Yes if you put it in recovery mode it's only the cat5 cable (default
OOB config).
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
Yes if you put it in recovery mode it's only the cat5 cable (default OOB
config).
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 22, 2021 at 12:37 PM Nate Burke wrote:
> Ok, that makes me feel a little better
>
> Recovery
Ok, that makes me feel a little better
Recovery mode appears to be available on both the Fiber and Cat5 From
there you can enter 'default mode' which will set the data path to the
Cat5, and you can update and reboot from there.
On 4/22/2021 11:18 AM, Adam Moffett wrote:
Is Cat5 the default
Is Cat5 the default setting? So in recovery console mode you'd have the
Cat5 and you could get in on 169.254.1.1?
https://community.cambiumnetworks.com/t/how-to-enter-default-mode-or-recovery-console-for-450b-450i-and-450m-series-products/44936
On 4/22/2021 12:14 PM, Nate Burke wrote:
Not
nope. It is one or the other. Dumbo but at least they put a SFP cage on
it.
On Thu, Apr 22, 2021 at 11:11 AM Adam Moffett wrote:
> I don't have a 450m
>
> Can you have both ports on with different IP's? Even if they're not
> bridged at least a way to back door in through the second port?
Not that I've found. It's a single drop down box to select the data
path, that's the only setting. I set it for Fiber, the Cat5 port still
has a physical link, but passes no traffic.
I unplugged the Fiber cable, plugged my laptop into the cat5 and
rebooted. I got a handfull of pings
I don't have a 450m
Can you have both ports on with different IP's? Even if they're not
bridged at least a way to back door in through the second port?
On 4/22/2021 12:07 PM, Nate Burke wrote:
Oh, that's bad. A fully functional AP, hanging in the air, that's
completely unusable just
Oh, that's bad. A fully functional AP, hanging in the air, that's
completely unusable just because what should/can be redundant, isn't,
because of software.
On 4/22/2021 10:58 AM, Josh Luthman wrote:
It sucks. That's how it is.
If it's 5 GHz you can do it over RF. If it's 3 GHz you can't
It sucks. That's how it is.
If it's 5 GHz you can do it over RF. If it's 3 GHz you can't because it'll
have to reach a SAS to transmit.
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 22, 2021 at 11:14 AM Nate Burke wrote:
I'm getting ready to deploy my first set of 450M radios, from my bench
testing, and reading through the manual, do you have to Choose which
data path is active, Copper OR Fiber? And the only way to switch it if
that path is down is to log into the Radio with an SM connection over
the RF?
Yeah, then the 1970's can call you.
On 4/21/2021 5:06 PM, Chuck McCown via AF wrote:
T1 !!!
-Original Message- From: Matt Hoppes
Sent: Wednesday, April 21, 2021 2:26 PM
To: AnimalFarm Microwave Users Group ; Josh Luthman
Subject: Re: [AFMUG] Self Contained DSLAM?
They won't work at
29 matches
Mail list logo