free stand? I've seen them almost triple that before :)
On Tue, Sep 30, 2014 at 7:22 PM, Jerry Head via Af af@afmug.com wrote:
Rohn 25g will stand to 30'
Not sure what the 25 is.
On 9/30/2014 1:38 PM, Gilbert T. Gutierrez, Jr. via Af wrote:
I am looking for a 30ft freestanding 25
Put up as large antenna as you want, just use it for “local signals”only...
From: Josh Reynolds via Af
Sent: Tuesday, September 30, 2014 9:42 PM
To: af@afmug.com
Subject: Re: [AFMUG] Legal FCC document about deed restrictions andantennas
Like a yagi?
Josh Reynolds, Chief Information Officer
I looked at the same thing :) The RTP header is pretty short. You've
technically got 12 bytes of RTP header, but some of it is sequence
number and timestamp which I don't know how you could match on. You can
make reasonable guesses about what the first 16 bits are going to be,
after that you
Apparently Miktotik employs something called ARP poisoning as a default.
Just letting anyone know that might run into this.
Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rory Conaway via Af
Sent: Tuesday, September 30, 2014 2:29 PM
To: af@afmug.com
Subject: Re: [AFMUG] Mikrotik
Surely the SIP messages will contain the IP addresses of the re-invite for the
RTP stream. Any way to reliably pull those?
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: Adam Moffett via Af af@afmug.com
To: af@afmug.com
I found that Dlink had a firmware upgrade to their router that allegedly
fixes the problem. However, the customer felt the need to upgrade the
router, which also took care of the problem.
bp
On 9/30/2014 11:12 AM, Mark - Myakka Technologies via Af wrote:
Bill,
Yes, we got a notice also. I
Cool. Thanks Eric. We are on 08.8a, so that should load on our system.
bp
On 9/30/2014 1:19 PM, Eric Muehleisen via Af wrote:
0.8.7h
On Tue, Sep 30, 2014 at 2:04 PM, David via Af af@afmug.com
mailto:af@afmug.com wrote:
What version cacti was this created in ?
SVN
On
Thankfully they've dropped the first-born son requirement
bp
On 9/30/2014 2:03 PM, Eric Muehleisen via Af wrote:
How large of a DNA sample did they require? Last I heard it was
something like a pint of blood, fingerprints, hair follicle and SSN.
On Tue, Sep 30, 2014 at 3:56 PM, Dan
Yah. So-called universal recipient, as long as the donor is not negative.
bp
On 9/30/2014 10:48 AM, Chuck McCown via Af wrote:
Well at least you can take blood from anyone, right?
*From:* Bill Prince via Af mailto:af@afmug.com
*Sent:* Tuesday, September 30, 2014 11:47 AM
*To:* af@afmug.com
Can it be disabled?
On Wed, Oct 1, 2014 at 9:52 AM, Rory Conaway via Af af@afmug.com wrote:
Apparently Miktotik employs something called ARP poisoning as a default.
Just letting anyone know that might run into this.
Rory
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Rory
You need to add a hostpot bypass rule for the network that you don't
want subjected to the hotspot.
Can it be disabled?
On Wed, Oct 1, 2014 at 9:52 AM, Rory Conaway via Af af@afmug.com
mailto:af@afmug.com wrote:
Apparently Miktotik employs something called ARP poisoning as a
I guess a few posters are out, then. ;-)
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: Bill Prince via Af af@afmug.com
To: af@afmug.com
Sent: Wednesday, October 1, 2014 10:21:19 AM
Subject: Re: [AFMUG] And this is why we
Thanks
Matthew Jenkins
SmarterBroadband
m...@sbbinc.net
530.272.4000
On 09/30/2014 11:05 AM, Eric Muehleisen via Af wrote:
I took a PTP500 and changed it slightly.
https://dl.dropboxusercontent.com/u/1578608/Public/cacti_host_template_cambium_ptp_650_bh.xml
On Tue, Sep 30, 2014 at 11:17 AM,
Has anyone made and willing to share a cacti template for ePMP?
We won’t be able to test until after 5pm tonight but I’ll let you know. I’m
just trying to figure out how the devices are getting affected on a different
subnet from the hotspot DHCP users.
Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett via Af
Sent: Wednesday,
Yeah, maybe if/when ePMP gets 2.5ms framing.
On 10/1/2014 11:43 AM, Bill Prince via Af wrote:
Not yet. We are not on the ePMP bandwagon yet. I've got a couple of
sites that I would consider it for when it comes time to split
existing 802.11 sectors we have, but compatibility concerns are
At the ePMP training day I went on they said FSK sync compatibility was high on
there list.
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Bill Prince via Af
Sent: Wednesday, October 01, 2014 9:44 AM
To: af@afmug.com
Subject: Re: [AFMUG] Cacti Template for ePMP?
It might use ARP spoofing, I don't recall if the docs ever specified how
it does it, but I know the hotspot service will break absolutely
everything plugged into that interface unless you add a bypass rule for it.
I don't think that address-pool=none is going to do what you think.
We won’t
Yes,
This happens with different versions of cacti thats y I asked.
Typically backwards but not forward compatibility.
May have to look at versions array to see what versions are compatible
with yours.
Also, OS updates or patches could break it.
I have two instances of cacti running usually
Yes - the drop ceiling mount is aluminum, but the regular ceiling mount is
plastic. I guess the clips are pretty fragile on the plastic version.
On Wed, Oct 1, 2014 at 2:22 PM, Adam Moffett via Af af@afmug.com wrote:
I haven't seen the AC units. The unifi AP's I've seen have a round
aluminum
I just set up a basic one the other day. It grabs RSSI, SNR, MCS rates in
the default graph. I have a separate graph template that appears to be
polling traffic rates correctly as well. (ePMP doesn't report from the
standard interface table). I'm out working at a tower site today, but will
post
Also, if anybody can hit me with a btest on 208.99.240.158 I'm curious
what you can get on it.
Does anybody have a btest server on gigE with upload capacity to spare?
I wanted to test download on a new gigE link. I got 350meg on
Sterling's. Thanks Sterling.
I have an open one at
Right at 400 from you to me.
Dennis Burgess, CTO, Link Technologies, Inc.
den...@linktechs.net mailto:den...@linktechs.net – 314-735-0270 –
www.linktechs.net http://www.linktechs.net
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett via Af
Sent: Wednesday, October 01,
Both are results from RB1100AHx2 routers in our network directly behind
the Cisco. You can traceroute the IPs to see what path you take to get
there.
Matthew Jenkins
SmarterBroadband
m...@sbbinc.net
530.272.4000
On 10/01/2014 11:35 AM, Adam Moffett via Af wrote:
Also, if anybody can hit me
Yes send us an email with address.
Thanks,
Ben
On Oct 1, 2014, at 2:20 PM, Darin Steffl via Af af@afmug.com wrote:
Email support and they'll take care of it for you.
On Wed, Oct 1, 2014 at 1:19 PM, Bobby Lacey via Af af@afmug.com wrote:
Anyone have an extra one of these lying around or
awesome, thanks guys.
Both are results from RB1100AHx2 routers in our network directly
behind the Cisco. You can traceroute the IPs to see what path you take
to get there.
Matthew Jenkins
SmarterBroadband
m...@sbbinc.net
530.272.4000
On 10/01/2014 11:35 AM, Adam Moffett via Af wrote:
Also,
That IP has a 1gig CIR on a 10Gig port. I haven't seen that symptom
before, but I wonder if it's something to do with the 10gig SFP.
Anyone see this before on CCR routers? I'm on 6.19 and when running
UDP bandwidth to you, it shows 8.4 Gbps but the interface shows 990
Mbps. WinBox glitch or
I got Auth Failed on your HE circuit.
Tools-Btest Server, uncheck authenticate.
For some reason I can't connect to the Cogent IP eitherbut no error
message. Just says connecting at the bottom of the window.
Anyone see this before on CCR routers? I'm on 6.19 and when running
UDP
Matt has plans? Like crossfit bowling? :)
crossfit bowling?
Josh Reynolds, Chief Information Officer
SPITwSPOTS, www.spitwspots.com http://www.spitwspots.com
On 10/01/2014 11:15 AM, Ben Moore via Af wrote:
Hopefully not beating me...but bowling with me :-)...Matt said he is
planning on
Also, I'm running a CCR and it appears the Bandwidth Test only uses 1 CPU
so the TCP tests are capped between 350-400 no matter what I do. Running
UDP though I see the full Gig to other servers. Running speedtest.net to a
server and newsgroups also achieves the full Gig so the CCR's CPU limits
the
Location, location, location.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: Matt via Af af@afmug.com
To: af@afmug.com
Sent: Wednesday, October 1, 2014 2:47:03 PM
Subject: [AFMUG] Datacenter Rackspace
What is everyone
On 10/1/14, 3:47 PM, Matt via Af wrote:
What is everyone paying for data center rack space?
From $50/mo for Ghetto Colo (otherwise known as the bathroom in the
back off) to $900/mo for a full rack with 20A in Columbus.
Mark
--
Mark Radabaugh
Amplex
m...@amplex.net 419.837.5015 x 1021
Then it's probably just too much space between versions.
bp
On 10/1/2014 11:42 AM, Eric Muehleisen via Af wrote:
Bill,
Negative. I exported the host template including dependancies. Also,
none of the data sources contain calls to external data sources or
data queries. Just good ole Get SNMP
You mean with carrier type of cable?
bp
On 10/1/2014 12:10 PM, Ken Hohhof via Af wrote:
Do you know, is this stuff suitable for aerial installation, and if
so, what would be the best install method, assuming we don’t have the
equipment to do aerial lashed? Is there some kind of figure 8
OK, thanks, looks like the self support version would be 12DM, m=messenger.
http://ce.superioressex.com/products/communications/osp-cable/fiber/Dri-Lite-Loose-Tube-Single-Jacket-Single-Armor-Self-Support-Series-12DM/
From: Jeremy via Af
Sent: Wednesday, October 01, 2014 2:39 PM
To: af@afmug.com
Heheh. Heck , I can do that with bumpers. J
Dennis Burgess, CTO, Link Technologies, Inc.
den...@linktechs.net mailto:den...@linktechs.net – 314-735-0270 –
www.linktechs.net http://www.linktechs.net
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ben Moore via Af
Sent: Wednesday,
I’m fairly certain we did! Excited.. J
Dennis Burgess, CTO, Link Technologies, Inc.
den...@linktechs.net mailto:den...@linktechs.net – 314-735-0270 –
www.linktechs.net http://www.linktechs.net
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rick Harnish via Af
Sent: Wednesday,
Is this just the ISP version of Apps bought through a reseller? I'm using
the free version of Google Apps and have yet to hear a peep about it being
discontinued.
On Wed, Oct 1, 2014 at 12:12 PM, Matt via Af af@afmug.com wrote:
What is everyone moving too that used to use this service?
I picked up some 24 strand armored from Comstar Supply not too long ago,
might want to check with them.
-Jason
On Wed, Oct 1, 2014 at 1:57 PM, Jeremy via Af af@afmug.com wrote:
I need a couple hundred feet of 12 strand armored fiber. SE 12D or
similar. Everyone else wants to sell me 3300'.
I’m only bowing if Kristaps comes and is on the SAF team :-P
Daniel White | Managing Director
SAF North America LLC
Cell:
(303) 746-3590
Skype:
danieldwhite
E-mail:
mailto:daniel.wh...@saftehnika.com daniel.wh...@saftehnika.com
From: Af [mailto:af-boun...@afmug.com]
;-) Does he bowl?? I am having to be very selective...We don't want to go
down! ;-)
On Wed, Oct 1, 2014 at 4:07 PM, Daniel White via Af af@afmug.com wrote:
I’m only bowing if Kristaps comes and is on the SAF team :-P
[image: cid:image001.jpg@01CE2975.BD4B6370]
*Daniel White* | Managing
So you're saying you need a different AC server for each subnet? :)
No.
AirControl uses a service built in to ubnt radios that communicates via SSH.
Josh Reynolds, Chief Information Officer
SPITwSPOTS, www.spitwspots.com http://www.spitwspots.com
On 10/01/2014 03:37 PM, Jaime Solorza via Af
Ken,
We picked up a couple hundred feet of figure-8 conduit from a local
utility supply house a few years ago for something like $0.25/foot.
Looks a lot like this stuff: http://www.duraline.com/conduit/figure-8
It's meant for aerial installation. I used it from the roof of the
elevator
And I have no clue if Kristaps bowls or not!
Funny – I leave WISPAPALOOZA to fly to Latvia. Guess I’ll ask him in person
(and I have to say, Ubiquiti picked the nicest building in Riga for an office…
lucky guy).
Daniel White | Managing Director
SAF North America LLC
Cell:
- Original Message -
From: Jay Fuller - Cyber Broadband Inc
To: Cyber Broadband Inc.
Sent: Thursday, October 02, 2014 12:42 AM
Subject: more cable companies cut the tv cord
More Cable Companies Take TV Off Menu
4 hrs ago - AP
A growing group of small cable-TV providers are
45 matches
Mail list logo