Re: [AFMUG] Mimosa did it again

if the county has rules that go against OTARD then they are breaking federal law too. just instal per the OTARD rules and you have nothing to worry about. if they give you flack then direct them to this website http://www.fcc.gov/guides/over-air-reception-devices-rule and tell them to pound sand

Re: [AFMUG] Mimosa did it again

You don't have to convince me that OTARD trumps all (other than safety). However, often times these types of people aren't that rational. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Sean Heskett via Af" To: af@afmug.co

Re: [AFMUG] Mimosa did it again

i have never gotten an attorney (that i was paying or my client was paying) involved. the HOAs have wasted their money on attorneys only to be told by their attorneys that they should stop breaking federal law. the county has nothing to do with HOAs or federal law. HOAs are corporations set up u

Re: [AFMUG] Mimosa did it again

The county could have restrictive regulations as well. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Sean Heskett via Af" To: af@afmug.com Sent: Wednesday, November 12, 2014 10:16:30 PM Subject: Re: [AFMUG] Mimosa did i

Re: [AFMUG] 5.1 PMP rules

Just checkin to see how high it would go. My memory says that there is no practical limit for 5.8 GHz PTP. bp On 11/12/2014 7:11 PM, George Skorup (Cyber Broadcasting) via Af wrote: 15' dish!? 68dBm!, 6300W EIRP!? Holy bat, crapman! Keep your balls clear of that. On 11/12/2014 8:55 PM, Bil

Re: [AFMUG] Cacti 32-bit versus 64-bit counters

Rats. Something else is broken. After I installed the fix64bit, the settings showed up under Misc. Fine. But when I look at one of those graphs, the fix64bit icon is MIA. bp On 11/12/2014 1:26 PM, George Skorup (Cyber Broadcasting) via Af wrote: No, 64-bit counters are part of the stand

Re: [AFMUG] Mimosa did it again

The county needs to be educated anyway and redirecting them to the county sure is a lot cheaper than getting an attorney involved. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Sean Heskett via Af" To: af@afmug.com Sent

Re: [AFMUG] 5.1 PMP rules

5.8 has no antenna gain limit for PtP. 5.1 you have to start backing of Tx power 1 dB for every dB of antenna gain over 23. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Rory Conaway via Af" To: af@afmug.com Sent: Wedne

[AFMUG] this

http://coldwar-ct.com/Home_Page_S1DO.html -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance

Re: [AFMUG] 5.1 PMP rules

15' dish!? 68dBm!, 6300W EIRP!? Holy bat, crapman! Keep your balls clear of that. On 11/12/2014 8:55 PM, Bill Prince via Af wrote: Maximum it lets me go to in 5.8 GHz is 68 dBm. This is using a connectorized PTP650, and a 15' parabolic dish. bp On 11/12/2014 2:34 PM, That One Guy via Af wro

Re: [AFMUG] Mimosa did it again

There is no need for that. The OTARD rules have a section that instructs entities on how to Petition the fcc for a waiver etc. Just follow OTARD and don't back down. http://www.fcc.gov/guides/over-air-reception-devices-rule On Wednesday, November 12, 2014, Mike Hammett via Af wrote: > Maybe

Re: [AFMUG] Phantom Default Plug?

I had one do that, Paul at PDMNet said it was a hardware problem and apparently somewhat common, I sent it in and they fixed it. It was a pretty old SM and I thought it was just crud or water in the jack or on the PCB but I cleaned it up really good with alcohol with no success. From: Steve D

[AFMUG] Phantom Default Plug?

I know I've seen this before, but just had an FSK 2.4 SM do this to me - real bugger too because it was the last in my truck while I was out doing a site test. Any ideas what caused it or how to fix it? I think I was in the process of changing color codes when it happened. It's just my truck tes

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

After upgrading from 2.2 to 2.3.1 I can't save any config changes. That's the real problem here. Steve B. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Wireless Admin via Af Sent: Wednesday, November 12, 2014 6:32 PM To: af@afmug.com Subject: Re: [AFMUG] ePMP Bet

Re: [AFMUG] 5.1 PMP rules

Maximum it lets me go to in 5.8 GHz is 68 dBm. This is using a connectorized PTP650, and a 15' parabolic dish. bp On 11/12/2014 2:34 PM, That One Guy via Af wrote: cambium linkplanner is locking it at 36 on ptp I havent looked on the ptp650 to see if its locked Man i hope somebody can provid

Re: [AFMUG] Off I go

https://www.youtube.com/watch?v=dqZ2sEOe5K0 https://www.youtube.com/watch?v=fKnclFxWLWg - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Jaime Solorza via Af" To: "Animal Farm" Sent: Wednesday, November 12, 2014 8:03:32

Re: [AFMUG] ePMP 2' dish

Meh, I'll just use Laird dishes and get the stupid pipe strap adapter things. These links will be replaced with licensed later anyway. Then I can reuse the Laird dishes for connectorized 450 SMs too. On 11/12/2014 4:55 PM, Mathew Howard via Af wrote: oh, neat... it looks like RF Elements and KP

Re: [AFMUG] FCC article on Fox News

The problem with the common carrier argument is what’s happening in state the owns the fiber built with grant money. They only license one company per area, making it difficult for wireless competition. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown via Af Sent: We

Re: [AFMUG] Mimosa did it again

Maybe a good approach is to educate the county, then if the association argues, send them to the county. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Douglas A. via Af Hass To: Ken Hohhof via Af Sent: Wed, 12 Nov 2014 10:10:40 -0

Re: [AFMUG] OSHA Written Safety Plan for WISPs

If you're on the west coast be careful about requesting "safety meetings" with construction crew, or you may get more than you bargained for. :-) On Wed, Nov 12, 2014 at 5:42 AM, Tyson Burris @ Internet Communications Inc via Af wrote: > Dan, > > > > We don’t have a project manager or foreman ei

Re: [AFMUG] Cost effective 10Gb switch

If all you want is a great deal of layer-2-only, 24-port or 48-port SFP+ and a switch fabric, the Quanta switches which run Cumulus Linux (debian based) are a good option. There are about four different Taiwan-based manufacturers that build switches which run Cumulus. On Wed, Nov 12, 2014 at 7:25

Re: [AFMUG] FCC article on Fox News

This On 11/12/2014 02:43 PM, Chuck McCown via Af wrote: Yep, I agree with some of the net neutrality arguments, but am wholly against common carrier unless subsidies come along with it. *From:* Bill Prince via Af *Sent:* Wednesday, November 12, 2014 4:40 PM *To:* af@afmug.

Re: [AFMUG] 5.1 PMP rules

oh glorious day! On Wed, Nov 12, 2014 at 5:36 PM, Bill Prince via Af wrote: > We just went through this a couple months ago. Process was > straightforward. Upgrade to 01-21, then add the key to allow those > frequencies. Bada bing. > > bp > > > > On 11/12/2014 2:59 PM, Mathew Howard via Af

[AFMUG] ePMP dishes

Are the current canopy dishes compatible with the ePMP radio? It doesn’t look like it. It looks like you’d need an extension piece or something. Is that piece sold separately?

Re: [AFMUG] FCC article on Fox News

Yep, I agree with some of the net neutrality arguments, but am wholly against common carrier unless subsidies come along with it. From: Bill Prince via Af Sent: Wednesday, November 12, 2014 4:40 PM To: af@afmug.com Subject: Re: [AFMUG] FCC article on Fox News Of course, net neutrality and th

Re: [AFMUG] FCC article on Fox News

Of course, net neutrality and the common carrier question are two completely unrelated issues. You can agree with one without agreeing to the other (regardless of which side you're on). bp On 11/12/2014 3:21 PM, Rory Conaway via Af wrote: I'm planning on sending Tom a sympathy card. He is

Re: [AFMUG] 5.1 PMP rules

We just went through this a couple months ago. Process was straightforward. Upgrade to 01-21, then add the key to allow those frequencies. Bada bing. bp On 11/12/2014 2:59 PM, Mathew Howard via Af wrote: That's odd... I wonder if you have to do something else to enable it. --

Re: [AFMUG] 5.1 PMP rules

Cambium rules in the CYA department. I'm sure that's true, they don't want to deal with FCC problems. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 12, 2014 at 6:32 PM, Mathew Howard via Af wrote: > Thanks! so it should be safe to

Re: [AFMUG] 5.1 PMP rules

Thanks! so it should be safe to just go with what the interface allows, as long as the antenna size is set correctly? From: Af [af-boun...@afmug.com] on behalf of Sakid Ahmed via Af [af@afmug.com] Sent: Wednesday, November 12, 2014 5:22 PM To: af@afmug.com Subject:

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

We use PPPoE as well. Anyone else get a static management IP working in conjunction with PPPoE for Customer using this software update? Steve B. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af Sent: Wednesday, November 12, 2014 3:40 PM To: af@afmug.com

Re: [AFMUG] 5.1 PMP rules

Its 20dBm From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mathew Howard via Af Sent: Wednesday, November 12, 2014 5:19 PM To: af@afmug.com Subject: Re: [AFMUG] 5.1 PMP rules That's very helpful! Can someone from Cambium answer what the max transmit power is for ePMP in 5150-5250? specifical

[AFMUG] FCC article on Fox News

I'm planning on sending Tom a sympathy card. He is caught between his boss, Democratic donors, and his past and future clients. FCC HEAD MAY BREAK WITH OBAMA ON NET NEUTRALITY While many liberal Democrats are falling in line behind President Obama's call for the Federal Communications Commis

Re: [AFMUG] 5.1 PMP rules

That's very helpful! Can someone from Cambium answer what the max transmit power is for ePMP in 5150-5250? specifically, for two eForce 100 in a point-to-point configuration. From: Af [af-boun...@afmug.com] on behalf of Bruce Collins via Af [af@afmug.com] Sent: We

Re: [AFMUG] 5.1 PMP rules

The short answer is that PTP 650 does support 5.15 GHz. To access 5.15GHz you will need to be on release 01-21 and then go to the support website to add 5.1GHz license key (no charge). Because of the out-of-band emissions requirements there are automatic backoffs in power on the band edges of

[AFMUG] Request for Comments

Hi everybody, I hope everyone is doing well. I wanted to reach out to the list and find out what anyone thought of these stats. Thank you and have a great day. Ryan Shorney Network Administrator Total Highspeed Internet Solutions www.totalhighspeed.com 417-851-1107 r...@totalhig

Re: [AFMUG] 5.1 PMP rules

That's odd... I wonder if you have to do something else to enable it. From: Af [af-boun...@afmug.com] on behalf of That One Guy via Af [af@afmug.com] Sent: Wednesday, November 12, 2014 4:52 PM To: af@afmug.com Subject: Re: [AFMUG] 5.1 PMP rules im on 1-21 it only

Re: [AFMUG] ePMP 2' dish

ePMP AP + this bracket gets you the 4 tab thing so it slides into a "Ubnt mount" http://www.kpperformance.ca/epmp-plate-case-bracket Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 12, 2014 at 5:47 PM, Mathew Howard via Af wrote: > T

Re: [AFMUG] ePMP 2' dish

rf elements is making a smaller one, 22dBi I think w/ twistport, that will work with epmp On 11/12/2014 12:59 PM, George Skorup (Cyber Broadcasting) via Af wrote: So I guess this doesn't exist. Or nobody cares. On 11/12/2014 10:15 AM, George Skorup (Cyber Broadcasting) via Af wrote: Is there a

Re: [AFMUG] ePMP 2' dish

oh, neat... it looks like RF Elements and KPP both make adapters to attach an ePMP to a Ubiquiti style mount. From: Af [af-boun...@afmug.com] on behalf of George Skorup (Cyber Broadcasting) via Af [af@afmug.com] Sent: Wednesday, November 12, 2014 4:36 PM To: af@a

Re: [AFMUG] 5.1 PMP rules

im on 1-21 it only has the option for 5.2 .54 and 5.8 in the GUI, maybe im missing something Does anyone have a link to an accurate up to date cheatsheet for the entire 5ghz band and its subsets? On Wed, Nov 12, 2014 at 4:44 PM, Mathew Howard via Af wrote: > I'm pretty sure I got an email from

Re: [AFMUG] ePMP 2' dish

There may be, I'm not sure. I know some antenna manufacturers are selling brackets to attach to their antennas, but I don't remember seeing any dishes. I guess you could just go around the whole thing with zip ties, but I'm not sure how well that would work. From

Re: [AFMUG] 5.1 PMP rules

I'm pretty sure I got an email from Cambium awhile back saying it did... yeah, here it is... looks like it needs a license key to enable it. http://www.cambiumnetworks.com/pressreleases/2014/07/28/cambium-networks-ptp-650-receives-fcc-grant-to-operate-in-5150-to-5250-mhz

Re: [AFMUG] 5.1 PMP rules

The rules definitely do allow up to 53, but you have to go with whatever the particular radio is certified for because of the OOBE stuff. The ePMP interface locks to 36 when it's in PtMP mode, but when you switch it to PtP it lets you go up to 50 (20dBm + 30dBi) - it doesn't let you go higher t

Re: [AFMUG] 5.1 PMP rules

crud, 650 doesnt do 5.1, that is disappointing On Wed, Nov 12, 2014 at 4:34 PM, That One Guy via Af wrote: > cambium linkplanner is locking it at 36 on ptp > I havent looked on the ptp650 to see if its locked > Man i hope somebody can provide some evidence that it can go up to 53, > that would g

Re: [AFMUG] ePMP 2' dish

Isn't there like a $10 add-on piece that lets it be pipe strapped? Yeah, why isn't that just standard like a Rocket, WTF Cambium. On 11/12/2014 4:34 PM, Mathew Howard via Af wrote: There's not really a good way to attach an ePMP without a bracket though... it would be nice if they had some sort

Re: [AFMUG] ePMP 2' dish

There's not really a good way to attach an ePMP without a bracket though... it would be nice if they had some sort of slot for a zip tie, like the Rockets. From: Af [af-boun...@afmug.com] on behalf of Josh Luthman via Af [af@afmug.com] Sent: Wednesday, November 12,

Re: [AFMUG] 5.1 PMP rules

cambium linkplanner is locking it at 36 on ptp I havent looked on the ptp650 to see if its locked Man i hope somebody can provide some evidence that it can go up to 53, that would get a pretty big load of my back right now On Wed, Nov 12, 2014 at 4:31 PM, Mathew Howard via Af wrote: > That's de

Re: [AFMUG] 5.1 PMP rules

That's definitely not right... maybe you have numbers from the old 5150-5250 rules? PtMP is 36dBm EIRP, and PtP is 53dBm EIRP - however, because of the OOBE stuff, I'm not aware of anything that can actually do 53dBm. Ubiquiti stuff is all limited to 36dBm, ePMP lets me set the Tx power up to 2

Re: [AFMUG] 5.1 PMP rules

Long time? Rule change maybe? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 12, 2014 at 5:29 PM, That One Guy via Af wrote: > I dont recall where I printed it off from, but its what Ive been > referencing for a long time for 5ghz >

Re: [AFMUG] 5.1 PMP rules

I dont recall where I printed it off from, but its what Ive been referencing for a long time for 5ghz On Wed, Nov 12, 2014 at 4:26 PM, Josh Luthman via Af wrote: > Where did the cheat sheet come from? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 >

Re: [AFMUG] 5.1 PMP rules

Where did the cheat sheet come from? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 12, 2014 at 5:24 PM, That One Guy via Af wrote: > Really? My cheetsheet shows much lower EIRPs - 22 on PtP and 16 on PmP!! > > > On Wed, Nov 12, 2014

Re: [AFMUG] 5.1 PMP rules

And I thought PTP was 36dBm also. Based on what you are saying, it’s the same as 5.8GHz. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of That One Guy via Af Sent: Wednesday, November 12, 2014 3:24 PM To: af@afmug.com Subject: Re: [AFMUG] 5.1 PMP rules Really? My cheetsheet sho

Re: [AFMUG] 5.1 PMP rules

Really? My cheetsheet shows much lower EIRPs - 22 on PtP and 16 on PmP!! On Wed, Nov 12, 2014 at 4:04 PM, Dan Petermann via Af wrote: > awesome, Thank you > > On Nov 12, 2014, at 2:58 PM, George Skorup (Cyber Broadcasting) via Af < > af@afmug.com> wrote: > > > 36dBm PtMP. 53dBm PtP. I assume th

Re: [AFMUG] ePMP 2' dish

Just zip tie the radio to the pipe of the 2' dish? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 12, 2014 at 5:22 PM, George Skorup (Cyber Broadcasting) via Af < af@afmug.com> wrote: > Because it's moar better. All one piece, send it

Re: [AFMUG] ePMP 2' dish

Because it's moar better. All one piece, send it up the tower, tower guys mount it. And that's exactly why I (mostly) use the Cambium antennas for the 450, so the guys don't have to fiddle with/break shit on the tower. No matter how many times I tell them not to let 900 radios dangle by the pig

Re: [AFMUG] OSHA Written Safety Plan for WISPs

Tyson, Good answers. Glad you’re doing it. Two thumbs up from me. Daniel White (303) 746-3590 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Tyson Burris @ Internet Communications Inc via Af Sent: Wednesday, November 12, 2014 6:43 AM To: af@afmug.com Subject: Re: [AFMUG] OSHA W

Re: [AFMUG] ePMP 2' dish

Force110 for 5ghz. 2.4 I think it's ITElite or 27rd. For a dish why do you need a mount? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 12, 2014 5:01 PM, "Alan West via Af" wrote: > Not out there, as far as I know. The Force 110 units from

Re: [AFMUG] ePMP 2' dish

We do have the Force 110 which allows for the ePMP Connectorized module or the GPS unit to mount in the back similar to the rocket dish (Integrated). Unfortunately, the radome is not there today and not common with Laird/UBNT Sakid p.s. Please visit us at http://community.cambiumnetworks.com

Re: [AFMUG] 5.1 PMP rules

awesome, Thank you On Nov 12, 2014, at 2:58 PM, George Skorup (Cyber Broadcasting) via Af wrote: > 36dBm PtMP. 53dBm PtP. I assume the SM qualifies as PTP like 5.7. And no DFS. > > On 11/12/2014 3:53 PM, Dan Petermann via Af wrote: >> Can someone give me a quick list of eirp rules in the 5.1 b

Re: [AFMUG] ePMP 2' dish

Not out there, as far as I know. The Force 110 units from Cambium should hit vendors late this month. An improvement, but still not a Nanobeam as far as assembly. On Wednesday, November 12, 2014 3:59 PM, George Skorup (Cyber Broadcasting) via Af wrote: So I guess this doesn't exist

Re: [AFMUG] ePMP 2' dish

So I guess this doesn't exist. Or nobody cares. On 11/12/2014 10:15 AM, George Skorup (Cyber Broadcasting) via Af wrote: Is there a 2' dish that has an integrated radio mount like the Rocket dish for ePMP radios? And that possibly uses the same radome that fits on Laird/UBNT style parabolics? I

Re: [AFMUG] 5.1 PMP rules

36dBm PtMP. 53dBm PtP. I assume the SM qualifies as PTP like 5.7. And no DFS. On 11/12/2014 3:53 PM, Dan Petermann via Af wrote: Can someone give me a quick list of eirp rules in the 5.1 band for multipoint?

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

You shouldn't be entering a default gateway there. The radio should be NATing traffic that goes out the PPPoE connection. You should specify a route such as 10.0.0.0/8 10.10.4.1 (the gateway for the 10.10.4.x network) somewhere (dunno if ePMP supports it). The customer can't have a dialog with

Re: [AFMUG] PTP600 5.4 GHz integrated

I have, ping me offlist Gino A. Villarini @gvillarini > On Nov 12, 2014, at 5:16 PM, Marco Coelho via Af wrote: > > Anyone have one of these laying around they want to sell? > > > > -- > Marco C. Coelho > Argon Technologies Inc. > POB 875 > Greenville, TX 75403-0875 > 903-455-5036

[AFMUG] 5.1 PMP rules

Can someone give me a quick list of eirp rules in the 5.1 band for multipoint?

Re: [AFMUG] Cost effective 10Gb switch

Thanks Gerard! From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gerard Dupont III via Af Sent: Wednesday, November 12, 2014 10:13 AM To: af@afmug.com Subject: Re: [AFMUG] Cost effective 10Gb switch If you don't need 48 ports or 40G uplink, there's also the IBM/BNT 8124E.. http://

Re: [AFMUG] Cacti 32-bit versus 64-bit counters

No, 64-bit counters are part of the standard IF-MIB, not MT specific. This is what I'm talking about. This is out of Cacti's interface.xml data query template. All standard stuff. Bytes In - 64-bit Counters walk

Re: [AFMUG] Mimosa did it again

hahaha - Original Message - From: That One Guy via Af To: af@afmug.com Sent: Wednesday, November 12, 2014 11:00 AM Subject: Re: [AFMUG] Mimosa did it again If there is an HOA giving you fits, I can help. you dont need a lawyer, a few burned out shells of houses in the neig

[AFMUG] PTP600 5.4 GHz integrated

Anyone have one of these laying around they want to sell? -- Marco C. Coelho Argon Technologies Inc. POB 875 Greenville, TX 75403-0875 903-455-5036

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

> Worked fine for me… questioning the gateway aspect as well… either it > assumes a gateway based on IP and mask OR its using the public Gateway to > get home This don't sound good. We use PPPoE. If there is no gateway and the PPPoE is out of session there is no way home?

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

Worked fine for me... questioning the gateway aspect as well... either it assumes a gateway based on IP and mask OR its using the public Gateway to get home From: Af [mailto:af-boun...@afmug.com] On Behalf Of Wireless Admin via Af Sent: Wednesday, November 12, 2014 3:12 PM To: af@afmug.com Subje

Re: [AFMUG] Mimosa did it again

Come guys. Remember the statement that 20% of Ubiquiti’s sales are in the U.S.? Mimosa is in California so I’m fairly sure they know what a tinted windows is. So, Stefan, I would suggest not assuming everyone else is clueless and then extrapolating a bogus result from that. I’ve already got

Re: [AFMUG] Mimosa did it again

This probably has more to do with marketing trying to move some of the 2wire mentality over to Mimosa. Unfortunately for them, unlicensed self-install CPE are very impractical and wasteful from an RF standpoint (and will continue to be for the foreseeable future). The rest of their equipment look

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

With regards to separate management IP: 1) I enable the feature 2) Select static 3) enter IP and mask 4) No Gateway field ? 5) save configuration (I suppose not so since save is still available) 6) Reboot. 7) Poof settings gone. 8) If erro

Re: [AFMUG] Cacti 32-bit versus 64-bit counters

Thanks George, Yah. Had it V2c, and was trying to see what (if any) changes it made to the RRD files. They were the same, so I suspected something was amiss. I think you also need to poll the Mikrotik-specific OIDs (.1.3.6.1.4.1.14988 + ). The stock interface Data Queries built into cacti

Re: [AFMUG] Mimosa did it again

"OO burn!" Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.com On 11/12/2014 01:10 AM, Stefan Englhardt via Af wrote: This announcement tells that it would be possible to use this stuff indoor behind a window and get 500+ Mbps.

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

It is indeed like Christmas. Thanks Cambium Steve B. _ From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ray Savich via Af Sent: Wednesday, November 12, 2014 12:38 PM To: 'af@afmug.com' Subject: [AFMUG] ePMP Beta Release 2.3.1 Available Now Check out http://community.cam

Re: [AFMUG] procera results

Look at the live view detail of the SSL category and you'll see what the traffic make up is in real time. Joe On Nov 12, 2014, at 9:17 AM, Kurt Fankhauser via Af wrote: > so if someone is logged into google and watched a youtube video it shows as > SSL ? > > Sent from my iPhone > > Kurt Fa

Re: [AFMUG] Cacti 32-bit versus 64-bit counters

If you're set to in/out bits, then you're on 32bit counters. in/out bits (64bit) is what you want. There's completely different OIDs for in/out 64bit octets, called ifInHCOctets or something like that. You can convert a 32bit graph/RRD to 64 using the Fix64Bit plugin. All the data stays intact

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

Working for me! Management IP NICE! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 12, 2014 1:16 PM, "Ray Savich via Af" wrote: > All should be able to see the content now. > > > > Ray > > > > *From:* Af [mailto:af-boun...@afmug.com] *On B

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

All should be able to see the content now. Ray From: Af [mailto:af-boun...@afmug.com] On Behalf Of Vlad Sedov via Af Sent: Wednesday, November 12, 2014 12:01 PM To: af@afmug.com Subject: Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now > RFC1213 support YE > ARP table display it's like chr

[AFMUG] Cacti 32-bit versus 64-bit counters

I noticed that we're using 32-bit counters on some of our Mikrotik interfaces, and they are over-running the counter between 5-minute intervals. I added new counters that identify themselves as 64-bit counters when I add them, but for all intents and purposes the RRD files look the same. I

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

> RFC1213 support YE > ARP table display it's like christmas!! Vlad On 11/12/2014 11:37 AM, Ray Savich via Af wrote: Check out http://community.cambiumnetworks.com/t5/ePMP-Beta/New-ePMP-Beta-Release-2-3-1-now-available/m-p/36200 for details. Ray --- This email is free from viru

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

Same. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Josh Luthman via Af" To: af@afmug.com Sent: Wednesday, November 12, 2014 11:50:16 AM Subject: Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now Not sure but I don't

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

Same. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Josh Luthman via Af" To: af@afmug.com Sent: Wednesday, November 12, 2014 11:41:47 AM Subject: Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now You do not have suf

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

Not sure but I don't think so. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 12, 2014 12:45 PM, "Ray Savich via Af" wrote: > Hi Josh, > > Have you signed up for the open Beta program? > > > > Ray > > > > *From:* Af [mailto:af-boun...@afmug

Re: [AFMUG] Off I go

I will share pics as I take them when I have service. ..approaching Van Horn.. Jaime Solorza On Nov 12, 2014 10:46 AM, "Chuck McCown via Af" wrote: > Sounds like a fun trip. > > *From:* Jaime Solorza via Af > *Sent:* Wednesday, November 12, 2014 8:23 AM > *To:* Animal Farm > *Subject:* Re:

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

ePMP Beta release 2.3.1-RC3 is now available for download and you can find it here: https://support.cambiumnetworks.com/files/epmp System Release 2.3.1 adds the following functionality/features: *RFC1213 Support* RFC1213 supports standard interface MIBs. Items such as Ethernet interface Tx/R

Re: [AFMUG] Off I go

Sounds like a fun trip. From: Jaime Solorza via Af Sent: Wednesday, November 12, 2014 8:23 AM To: Animal Farm Subject: Re: [AFMUG] Off I go reference 11-12-Web-Marfa Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Nov 12, 2014 at 8:16 AM, Jaime Solorza via Af wrote: Good

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

Hi Josh, Have you signed up for the open Beta program? Ray From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af Sent: Wednesday, November 12, 2014 11:42 AM To: af@afmug.com Subject: Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now You do not have sufficient privileges for thi

Re: [AFMUG] ePMP Beta Release 2.3.1 Available Now

You do not have sufficient privileges for this resource or its parent to perform this action. Click your browser's Back button to continue. Return to my original page Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 12, 2014 at 12:37 PM,

[AFMUG] ePMP Beta Release 2.3.1 Available Now

Check out http://community.cambiumnetworks.com/t5/ePMP-Beta/New-ePMP-Beta-Release-2-3-1-now-available/m-p/36200 for details. Ray

Re: [AFMUG] Cost effective 10Gb switch

I'm trying to get Extreme to match the ~$6k price tag my friend gets on the X670-G2. If they don't, I may buy from him. Otherwise, that IBM is a great find! - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Gerard Dupont III

Re: [AFMUG] Cost effective 10Gb switch

Nice find! Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: "af@afmug.com" mailto:af@afmug.com>> Reply-To: "af@afmug.com" mailto:af@afmug.com>> Date: Wednesday, November 12, 2014 at 12:13 PM To: "af@afmu

Re: [AFMUG] Mimosa did it again

If there is an HOA giving you fits, I can help. you dont need a lawyer, a few burned out shells of houses in the neighborhood, theyll get on board. Im not saying Ill burn the houses down, Im just saying occasionnaly its happanstance that a guy has a list of addresses that all have bad wiring. On W

Re: [AFMUG] Mimosa did it again

Totally agree—functional, self-installable CPE at a competitive price would be a real game changer because it would give you one more option. Even if the self-install failed, you could then upsell to a professional install and perhaps some maintenance and capture a bit more incremental revenue,

Re: [AFMUG] Mimosa did it again

+1 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sean Heskett via Af Sent: Wednesday, November 12, 2014 10:11 AM To: af@afmug.com Subject: Re: [AFMUG] Mimosa did it again Our installers install the connection per OTARD and if anyone gives the homeowner any blow back we fight the fight for

[AFMUG] Philae touches down on the surface of a comet

http://www.cnn.com/2014/11/12/world/comet-landing-countdown/ Jaime Solorza

Re: [AFMUG] Mimosa did it again

Indoor CPE (often called wireless modems) still is kind of the holy grail, except for the small matter of making it work. Like DSL didn’t take off until they made it customer self-install and eliminated the truck roll. If you can mail the customer the device or have them pick it up at a storef

Re: [AFMUG] Points to Ponder

Excellent! Thanks for the morning laugh :) On Wednesday, November 12, 2014, Rory Conaway via Af wrote: > *There are many ways to look at a problem. * > > > > > > WHY DID THE CHICKEN CROSS THE ROAD?? > > SARAH PALIN: The chicken crossed the road because, Gosh darn, he's a > maverick. > > BARACK

  1   2   >