You can use the BCM without a Traco power supply, or in this case
without the remote cable. Set your PS output voltage to your desired
float voltage and it works like any other battery/UPS module. The only
kicker is obviously the temp compensation doesn't work without the
remote voltage control
Pfft! Who needs sleep? :)
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett
Sent: Thursday, April 9, 2015 4:11 PM
To: af@afmug.com
Subject: Re: [AFMUG] Weird network issue
Yeah I'll see if they're game for that. I would have thought of that myself if
Yeah I'll see if they're game for that. I would have thought of that
myself if they didn't make me get up at 3am :)
Only a quick suggestion.. on the 2811, setup a /30 or something routable for
testing... plugin directly on that port with IP/gateway and DNS - see if issue
is still there. T
Only a quick suggestion.. on the 2811, setup a /30 or something routable for
testing... plugin directly on that port with IP/gateway and DNS - see if issue
is still there. Then at least you know if it's in the ASA or not
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On
Which I don't :P
Oh well. I have other chargers that I can use to bring the batteries up and
keep them conditioned with. A really nice ICT unit in fact. :)
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "George
Good thought, but no.
On 4/9/2015 1:45 PM, Matt Brendle wrote:
You aren't blocking UDP 53 from them are you?
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett
Sent: Thursday, April 09, 2015 1:26 PM
To: af@afmug.com
Subject: Re: [AFMUG] Weird network is
Yep, sounds like there's something messed up with the remote voltage
control. Hard to tell if it's the PS or the BCM, unless you have another
set.
On 4/9/2015 11:12 AM, Christopher Tyler wrote:
When I cut off AC power it switches over to battery just fine.
It's just the power supply control th
Ok thanks!
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
http://www.wavelinc.com
tel. 419-562-6405
fax. 419-617-0110
On Thu, Apr 9, 2015 at 2:34 PM, Matt Mangriotis <
matt.mangrio...@cambiumnetworks.com> wrote:
> Kurt – We made a memory change on the PCB. There
Kurt – We made a memory change on the PCB. There is no functional difference
at all.
You may also notice that the Model Numbers also changed from ending in “A” to
ending in “B”.
Matt
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Kurt Fankhauser
Sent: Thursday, April 09, 2015 1:26 PM
To:
Does anyone know what the difference is between these two 450SM's with
different part numbers? HH vs JH?
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
http://www.wavelinc.com
tel. 419-562-6405
fax. 419-617-0110
You aren't blocking UDP 53 from them are you?
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett
Sent: Thursday, April 09, 2015 1:26 PM
To: af@afmug.com
Subject: Re: [AFMUG] Weird network issue
We did try Google DNS. No response. That's why I wanted the
We did try Google DNS. No response. That's why I wanted the ASA config.
So when they are on their backup they can ping anything by IP and it returns
properly. When they nslookup the return does not come back from their DNS server
or ANY whatsoever. Like you tried AT&T's and Googles? Can t
Anyone here work with BlueSocket WiFi before? A client of mine has it and their
self-signed certificate. WPA2-Enterprise works fine with Windows 7, but not 8.
My suggestion was to put a real certificate on it. They said they needed to
update Steel Belted RADIUS (and no plan as to when) to fix th
The antenna on the integrate PTP650 looks like a MARS antenna? Does anyone
know which part number of Mars antenna it is?
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
http://www.wavelinc.com
tel. 419-562-6405
fax. 419-617-0110
We have two of these.
Work very well.
Adam
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber
Broadcasting)
Sent: Wednesday, April 08, 2015 6:43 PM
To: af@afmug.com
Subject: Re: [AFMUG] Smaller generators with inverters
Yamaha EF1000iS converted t
When I cut off AC power it switches over to battery just fine.
It's just the power supply control that appears to be broken, everything else
seems to work. I followed the instructions line for line when I got it and it
didn't appear to work properly then either, so I think I just got a bad unit.
Or we are just getting royally screwed...
Jerry
> On Apr 8, 2015, at 2:27 PM, Mike Hammett wrote:
>
> It does show how little value those towers have, though. 1M towers and their
> total value was something around $23B? American Tower has 87k towers and has
> a market cap of $40B. Crown Cast
Our big $700 generator sits in the shop because it's a pain in the rear
to move.
The Honda ends up getting used for pretty much everything. One of
those cases it's worth the extra money.
Mark
On 4/9/15 11:26 AM, Josh Luthman wrote:
That's what it looks like my only good option is at this
That's what it looks like my only good option is at this point. It's just
silly that we spent $700 on a big 4kw 5 gallon gas generator and now we
have to spend $1000 on a small <12 hour portable generator. I don't care
if it's quiet - I just need to be able to carry it!!!
Josh Luthman
Office: 9
I'm going from memory, but I also thought they told you to adjust the pot
all the way down to minimum voltage. Whatever the instructions were, I
followed them and it worked.
-Original Message-
From: George Skorup (Cyber Broadcasting)
Sent: Thursday, April 09, 2015 10:05 AM
To: af@af
Oops, hit send too soon. Reason I ask about the relay in the BCM is I've
accidentally shorted the output before (long story) and the relay seemed
to be stuck. I smacked it and power-cycled a couple times and it was
fixed. Fuses, dummy! Facepalm.
On 4/9/2015 10:05 AM, George Skorup (Cyber Broad
Did you reconnect the battery? It senses the battery, so it might not do
anything if the battery isn't connected.
With the battery connected, do you see any current going into it?
Also, with the battery connected, disconnect the AC from the power
supply. Do you hear the relay click in the BCM?
Sounds like you could set it at 27 volts until you get a replacement BCM
in there.
bp
On 4/9/2015 7:58 AM, Christopher Tyler wrote:
Just tried that and the POT still does nothing. Now it just sits at 27.6v
constantly.
Just tried that and the POT still does nothing. Now it just sits at 27.6v
constantly.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "George Skorup (Cyber Broadcasting)"
To: af@afmug.com
Sent: Thursday, April 9
with its purpose being what it is (keeping the sites up and the money
flowing) is cheap seating a generator the best course of action? Over the
expected lifetime of the generator whats its actual cost going to work out
to, 1k for a generator that will easily last 10 years is 100 bucks a year
for an
Right. Some cheap stuff will complain about voltage. Other, more
expensive stuff, will complain about the waveform too. So get a good
inverter generator and not worry about it.
On 4/8/2015 10:36 PM, Bill Prince wrote:
I think he was saying that both the voltage and the frequency are
stable wit
22-23 volts I think is the bottom of the adjustment range on the TSP
power supply. At least you know the remote cable is working because the
BCM can shut down the power supply. Try disconnecting the remote cable
and adjust the pot on the power supply up to 27.6 volts. Power off, then
reconnect
If you are seeing dB increases like this based on cable lengths, you have an
impedance mismatch issue and the cable is performing the function of a
transmission line transformer. So, you could have internal damage to the
antenna, or a bad connection or fitting etc etc.
From: Glen Waldrop
Se
Looks like I have a bad BCM maybe. I disconnected the battery and the temp
sensor and left the remote wire connected.
I adjusted the pot on the BCM, and it does nothing at all.
The remote wire is definitely connected correctly, if I turn off the BCM it
turns off the power supply, turn it back on,
That's where something like an E.164 ENUM registry comes in handy... though
most people don't do anything with it.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: "Adam Moffett"
To: af@afmug.com
Sent: Tuesday, April 7, 2015
I still get customers paying $60/seat. *shrugs* I haven't added any new ones
lately, but I haven't been pushing that lately either.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: "George Skorup (Cyber Broadcasting)"
To: af@a
PIAF on VMWare.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: "Keefe John"
To: af@afmug.com
Sent: Monday, April 6, 2015 8:17:20 PM
Subject: Re: [AFMUG] VoIP
What are people using for their multi-tenant voip platform?
CLECs, usually yes. ILECs, usually no.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: "Lewis Bergman"
To: af@afmug.com
Sent: Monday, April 6, 2015 4:56:57 PM
Subject: Re: [AFMUG] VoIP
I had no idea that most phone compan
So when they are on their backup they can ping anything by IP and it returns
properly. When they nslookup the return does not come back from their DNS
server or ANY whatsoever. Like you tried AT&T's and Googles? Can they ping
that DNS server and receive a return?
Are they using any tunnels?
Are they using their other provider for DNS?
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett
Sent: Thursday, April 09, 2015 7:06 AM
To: af@afmug.com
Subject: [AFMUG] Weird network issue
I have a customer who uses us as a backup path to the internet. T
I have a customer who uses us as a backup path to the internet. They
have BGP sessions with us and another provider, and we just stack a few
prepends on the routes they send us and re-advertise them.
When their primary connection is out, they report having partial
connectivity. We just had a
36 matches
Mail list logo
