Re: [AFMUG] RF Calibration Failure ADI Catalina R1 chip not supported!

In my experience, if you complain a lot and offer to drive it to them, they take you up on it. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "George Skorup" To: af@afmug.com Sent: Friday, August 7, 2015 1:03:18 AM Sub

Re: [AFMUG] Site Monitor Expansion Order

That's right. I set up two identical systems, except the same OID means something different on the two setups because expansion units are listed in a different order. OI think I misread your question. You are talking the order of the expansion units. 14 hours in the sun working the bo

Re: [AFMUG] Routed vs bridge with a twist

I’d suggest BGP at all locations when building an MPLS network – MPBGP to be specific…. Sometimes folks who are just starting into MPLS presume that by having a full BGP mesh everywhere means that you need to carry the full Internet routing table … not the case and different routing table of

Re: [AFMUG] Routed vs bridge with a twist

I haven't grasped how this would work, but I haven't tried it in a lab yet either. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Paul Stewart" To: af@afmug.com Sent: Friday, August 7, 2015 7:55:51 AM Subject: Re: [AFMUG]

[AFMUG] Cheap VFL fiber test kit ?

Can anyone recommend a cost-effective (OK, cheap) kit to do basic fiber continuity tests that we could purchase for each van? Just to quickly make sure there isn't a broken fiber on a jobsite. Preferably one that comes with the necessary adapters to test ST, SC, LV, MM/SM etc. Paul McCall, Pr

Re: [AFMUG] Cheap VFL fiber test kit ?

For short range, a fault indicator light is cheap and easy. It doesn't prove attenuation is within spec, but it proves the path is or isn't broken. On 8/7/2015 9:10 AM, Paul McCall wrote: Can anyone recommend a cost-effective (OK, cheap) kit to do basic fiber continuity tests that we could p

Re: [AFMUG] Cheap VFL fiber test kit ?

http://www.fiberinstrumentsales.com/test-equipment/visual-fault-locators/fis-pocket-fault-locator-with-universal-2-5mm-adapter.html That one fits on anything with a 2.5mm ferrule. Which is everything you'll encounter except LC. To get on the 1.25mm ferrule of LC you can buy a second tool, or

Re: [AFMUG] Site Monitor Expansion Order

It would be outstanding if the base unit had the ability to map expansion communication to individual IPs On Fri, Aug 7, 2015 at 7:49 AM, Adam Moffett wrote: > That's right. I set up two identical systems, except the same OID means > something different on the two setups because expansion units

[AFMUG] FS: PTP 800 Licenses for sale

6 x PTP 800 upgrade 10 mbit to 100 1500$

Re: [AFMUG] Cheap VFL fiber test kit ?

We use that and a cheap light meter from china... Regards, Chuck On Fri, Aug 7, 2015 at 10:40 AM, Adam Moffett wrote: > > http://www.fiberinstrumentsales.com/test-equipment/visual-fault-locators/fis-pocket-fault-locator-with-universal-2-5mm-adapter.html > > That one fits on anything with a 2.5m

Re: [AFMUG] Routed vs bridge with a twist

Plus one for MPLS/VPLS. Gives you a lot more control over what goes where. From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup Sent: Thursday, August 6, 2015 8:52 PM To: af@afmug.com Subject: Re: [AFMUG] Routed vs bridge with a twist If you already have a routed core network,

Re: [AFMUG] Routed vs bridge with a twist

can somebody lay down the dummy version of MPLS implementation On Fri, Aug 7, 2015 at 9:58 AM, Shayne Lebrun wrote: > Plus one for MPLS/VPLS. Gives you a lot more control over what goes where. > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *George Skorup > *Sent:* Thursday, Augu

Re: [AFMUG] Routed vs bridge with a twist

I was going to do some reading on that myself. Last time I fooled with MPLS was on an x86 v4.17, bricked it as soon as I hit the button. Oddly enough I haven’t touched it since. From: That One Guy /sarcasm Sent: Friday, August 07, 2015 10:00 AM To: af@afmug.com Subject: Re: [AFMUG] Routed

Re: [AFMUG] Fwd: Windstream Takes $175M Connect America Offer To Expand Rural Broadband | FCC.gov

The cable co I consult for had an order for Windstream placed in November of 2013. They were trying to get off of AT&T fiber. The rep at Winstream assured us this is possible. The install was to take place in February 2014. Fast forward to I think Sept 2014, we cancel the order. Windstream was

Re: [AFMUG] Routed vs bridge with a twist

very interested in the MPLS implementation also. On Fri, Aug 7, 2015 at 10:00 AM, That One Guy /sarcasm < thatoneguyst...@gmail.com> wrote: > can somebody lay down the dummy version of MPLS implementation > > On Fri, Aug 7, 2015 at 9:58 AM, Shayne Lebrun wrote: > >> Plus one for MPLS/VPLS. Give

Re: [AFMUG] EPMP Failure

Well, that's how you get ants! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2015 at 11:58 AM, Nate Burke wrote: > Yes, those are Ants. The worst part is that it still feels like they're > crawling on me. Must have shorted out th

Re: [AFMUG] RF Calibration Failure ADI Catalina R1 chip not supported!

Hey, if they need failed hardware to figure it out, fine with me. On 8/7/2015 6:45 AM, Mike Hammett wrote: In my experience, if you complain a lot and offer to drive it to them, they take you up on it. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ---

Re: [AFMUG] RF Calibration Failure ADI Catalina R1 chip not supported!

I had one sitting here from the field that developed intermittent ADI communication failures. Just sent an email to r...@cambiumnetworks.com. Not sure if that’s the right way, or if you’re supposed to open a ticket. From: George Skorup Sent: Friday, August 07, 2015 11:26 AM To: af@afmug.com

Re: [AFMUG] RF Calibration Failure ADI Catalina R1 chip not supported!

This may or may not actually work. I filled this out early this week and haven't heard back: http://www.cambiumnetworks.com/support/ptp/rma-request Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2015 at 12:35 PM, Ken Hohhof wrote:

Re: [AFMUG] RF Calibration Failure ADI Catalina R1 chip notsupported!

H, I see you can replace “ptp” with “epmp” in the URL and that works, but “pmp” does not. From: Josh Luthman Sent: Friday, August 07, 2015 11:37 AM To: af@afmug.com Subject: Re: [AFMUG] RF Calibration Failure ADI Catalina R1 chip notsupported! This may or may not actually work. I filled

Re: [AFMUG] RF Calibration Failure ADI Catalina R1 chip notsupported!

Oooh good call, didn't see that. I just Google'd Cambium RMA. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2015 at 12:46 PM, Ken Hohhof wrote: > H, I see you can replace “ptp” with “epmp” in the URL and that works, > but “pm

Re: [AFMUG] Routed vs bridge with a twist

If you have even a couple of routers (ideally with switches off of each), you can simulate some pretty cool stuff… then add a third router into the mix and it’s even more fun. MPLS isn’t something you just learn right away – it’s something that takes time to learn and run through in a lab se

Re: [AFMUG] Routed vs bridge with a twist

Nice overview. I have a professional that programs and manages a very large fiber network working on my MPLS/BGP topology. So I’m learning lots as we move forward. He hasn’t used Mikrotik, so I have gave him a bunch of stuff to test and program. He seems satisfied that the Mikrotik can do wha

Re: [AFMUG] Fwd: Windstream Takes $175M Connect America Offer ToExpand Rural Broadband | FCC.gov

Did you see the article about windstream getting money for Alabama? I think it must have been an AP article because it showed up in our local paper. http://www.cullmantimes.com/news/state-fcc-provides-funding-for-expanded-broadband-in-rural-alabama/article_65ebebb8-3c50-11e5-a9ec-5b1fe1f16315

Re: [AFMUG] Routed vs bridge with a twist

That’s the basics. On a Mikrotik: Create a bridge with no ports. Call it ‘Loopback’. Assign a /32 to it, and advertise via OSPF. Set your OSPF instance router ID to this IP. MPLS->MPLS, under LDP Settings, select Enabled, use the Loopback IP as the LSR ID and Transport Address. Add the int

Re: [AFMUG] Routed vs bridge with a twist

You guys have given me some light reading to do based on my question above. Sounds like the consensus is a few mid sized L2 rather than one large L2 for backhauls? Or stick with a subnet per link as I have now? - Original Message - From: Shayne Lebrun To: af@afmug.com Sent: F

Re: [AFMUG] Small antenna for PTP, dual pol

He probably means too expensive? Actually, 23 dBi in 12x12 inches is pretty impressive, I think the MTI equivalent is 15x15 inches. From: Sean Heskett Sent: Thursday, August 06, 2015 8:16 PM To: af@afmug.com Subject: Re: [AFMUG] Small antenna for PTP, dual pol Too big?!?! It's 1' square lol

Re: [AFMUG] Routed vs bridge with a twist

Thanks and as Shayne mentioned in another response …. MTU is critical to this – very good point that I missed in my quick summary ;) From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sterling Jacobson Sent: Friday, August 7, 2015 2:45 PM To: af@afmug.com Subject: Re: [AFMUG] Routed vs

Re: [AFMUG] Small antenna for PTP, dual pol

too big, im looking for 6" to 8" square On Fri, Aug 7, 2015 at 3:14 PM, Ken Hohhof wrote: > He probably means too expensive? > > Actually, 23 dBi in 12x12 inches is pretty impressive, I think the MTI > equivalent is 15x15 inches. > > > *From:* Sean Heskett > *Sent:* Thursday, August 06, 2015 8:

[AFMUG] Good Powercode support contact

anyone?

Re: [AFMUG] Small antenna for PTP, dual pol

Googled a bit.. http://www.alfasystems.be/PDF/L1/Cat4ah1s15_a2_6.pdf http://www.planet.com.tw/en/product/product.php?id=4 http://www.kenbotong.com/wireless-antenna/WiFi-MIMO-Antennas/5GHz-Wifi-MIMO-Directional-Antennas/TDJ-D5158BFO.html On Fri, Aug 7, 2015 at 12:56 PM, Gino Villarini wrote:

Re: [AFMUG] Good Powercode support contact

Cameron Crum - cc...@wispmon.com lets see if Gino bites. ;P On Fri, Aug 7, 2015 at 2:57 PM, Gino Villarini wrote: > anyone? >

Re: [AFMUG] Routed vs bridge with a twist

I advocate keeping everything routed, and using MPLS/VPLS to move L2 where they need to go, when required. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Glen Waldrop Sent: Friday, August 7, 2015 3:09 PM To: af@afmug.com Subject: Re: [AFMUG] Routed vs bridge with a twist You guys h

[AFMUG] SAF Lumina not displaying remote side info

Aligning a SAF link, its up, passing traffic, just neither side is displaying the remote info, config is thesame as our other saf link that it is displaying, with the exception that the working one both radios are on the same subnet, this one they are on serarate /30. do the pull remote side data v

Re: [AFMUG] Good Powercode support contact

I've whined a few times about support during their transition period from losing Simon and Jacob, however my last experience and a contractors experience has been wonderful. I called in to ask a few questions about the ticketing system and not only did he answer my questions, he took the time

Re: [AFMUG] SAF Lumina not displaying remote side info

Yup, they talk to each other via IP. We ran into the same thing with our SAFs.. Kinda silly, I think. Vlad On 8/7/2015 3:31 PM, That One Guy /sarcasm wrote: Aligning a SAF link, its up, passing traffic, just neither side is displaying the remote info, config is thesame as our other saf link t

[AFMUG] Is anyone here doing ePTP at all?

Anyone at all? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373

Re: [AFMUG] SAF Lumina not displaying remote side info

I've seen it as well. I have concluded that the radios each communicate with each other via ip. if they are not on the same subnet you will have trouble until the network is connected/routed. I have noticed that (with the Integra W's were using) the management ports bridge traffic across the lin

Re: [AFMUG] SAF Lumina not displaying remote side info

well shit On Fri, Aug 7, 2015 at 3:47 PM, Vlad Sedov wrote: > Yup, they talk to each other via IP. We ran into the same thing with our > SAFs.. Kinda silly, I think. > > Vlad > > > On 8/7/2015 3:31 PM, That One Guy /sarcasm wrote: > > Aligning a SAF link, its up, passing traffic, just neither si

Re: [AFMUG] Is anyone here doing ePTP at all?

Yep, I just replaced a pair of NanoBridges with Force 110's doing ePTP a couple days ago and we have at least one other. On Fri, Aug 7, 2015 at 4:07 PM, Josh Luthman wrote: > Anyone at all? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 453

[AFMUG] Another neighborhood on fiber, sexy sexy!

This time I used a super dense 4U LC fiber panel that can connect up to 576. I've got about 370 of it loaded with fiber, about a third of that will be connected here. It requires the thinner mil cable which is the only PITA about this setup really. It's using 24 port 1U fiber switches, but I'm

Re: [AFMUG] Is anyone here doing ePTP at all?

How long has it been up? According to Cambium I'm the only one that's been experiencing a bug and it's all over the place. They've got a fix for it but it's just so weird that I'm the only one with the problem =/ Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Tr

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

imgur.com!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2015 at 5:37 PM, Sterling Jacobson wrote: > I guess the list doesn't like 2MB file attachments, lol! > > > > -Original Message- > From: Af [mailto:af-boun...@afmug

Re: [AFMUG] Is anyone here doing ePTP at all?

According to my notes, we installed it April 10th, it's uptime is 31 days right now... I'm not sure why it was reset at that point. I just remembered another one that's been up for about a month... I haven't seen any problems with any of them, you must just be lucky. On Fri, Aug 7, 2015 at 4:41 PM

Re: [AFMUG] Is anyone here doing ePTP at all?

I am super lucky that's for sure. AF5x doesn't even associate and I find an obscure ePTP bug (which they fixed, of which fix caused another bug and was also fixed). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2015 at 5:55 PM, Mat

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

How are those switches performing under load? --- Justin Wilson http://www.mtin.net Managed Services – xISP Solutions – Data Centers http://www.thebrotherswisp.com Podcast about xISP topics http://www.midwest-ix.com Peering – Transit – Internet Exchange > On Aug 7, 2015, at 5:37 PM, Sterling J

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

Why does it look like there's shrinkwrap over it? And apparently those wire ducts up each side of the rack are for fiber only, no Cat5 allowed? -Original Message- From: Sterling Jacobson Sent: Friday, August 07, 2015 4:37 PM To: af@afmug.com Subject: Re: [AFMUG] Another neighborhood

Re: [AFMUG] Is anyone here doing ePTP at all?

If it makes you feel better, I just put up the second half of an AF5x that I can't get to associate. I'm pretty sure it's my fault though for not setting something up right though... and I have a bad ethernet cable on the other side so I can't get to it to check. On Fri, Aug 7, 2015 at 4:58 PM, Jo

Re: [AFMUG] Is anyone here doing ePTP at all?

Mine worked at 2000 feet for a few weeks. Worked at the base of the tower. Move it to the far tower on that dish and no association. Thinking ePMP for that one... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2015 at 6:03 PM, Mat

Re: [AFMUG] R56 question

Im no expert here, but my initial thought is the wire going to the master bus is not big enough. The grand daddy of all tower grounding documents is the one from Motorola: https://sites.auburn.edu/admin/facilities/spw-bid-calendar/11-150%20AU%20Regional%20Airport-Construct%20a%20Self-Supporting%

Re: [AFMUG] R56 question

>The stuff you are looking for starts in Section 5.3 (around page 200). Someones referred to the guide before!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2015 at 6:08 PM, Justin Wilson - MTIN wrote: > Im no expert here, but

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

GPON does all that in one nice switch ;) Actually happy for residential that we made the switch. Regards, Chuck On Fri, Aug 7, 2015 at 5:37 PM, Sterling Jacobson wrote: > I guess the list doesn't like 2MB file attachments, lol! > > > > -Original Message- > From: Af [mailto:af-boun...@a

Re: [AFMUG] R56 question

If the owner wants R56 there will be very specific things that need to be done whether other things work or not. Justin --- Justin Wilson http://www.mtin.net Managed Services – xISP Solutions – Data Centers http://www.thebrotherswisp.com

Re: [AFMUG] R56 question

That is exactly right. R56, which by the way is updated every couple of years ago the link to a ten year old one while better than nothing wrong get you compliant to a demanding site owner. R56 allows no substitution for multiple conductors instead of larger gauges. If I remember correctly supplem

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

I am shocked there is no writing on the sheet describing connections ;). It does underscore how much more gear switching takes over PON. On Fri, Aug 7, 2015, 4:35 PM Sterling Jacobson wrote: > This time I used a super dense 4U LC fiber panel that can connect up to > 576. > > I've got about 370 o

Re: [AFMUG] Is anyone here doing ePTP at all?

We are about to deploy 2 eptp links -Original Message- From: "Josh Luthman" Sent: ‎8/‎7/‎2015 4:07 PM To: "af@afmug.com" Subject: [AFMUG] Is anyone here doing ePTP at all? Anyone at all? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373

Re: [AFMUG] EPMP Failure

Aren't ant eaters slow? Maybe I could use one to describe my competition. Mathew Howard wrote: But a fat ant eater would be even better for using in ads. On Fri, Aug 7, 2015 at 1:18 PM, Glen Waldrop > wrote: Around here the ant eater would either get fat or

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

If you need 48 ports per 1RU, then I would recommend you consider the Huawei S5700-52X-LI-48CS-AC. They do need moderate cooling, but have excellent cost-per-port and all the features you would want for Ethernet based FTTH (downstream port isolation, per port rate-limiting, SNMP, sticky MAC, stack

Re: [AFMUG] Fwd: Windstream Takes $175M Connect America Offer To Expand Rural Broadband | FCC.gov

They could use the money to fix their poorly designed and unreliable fixed wireless network... Erich Kaiser North Central Tower er...@northcentraltower.com Office: 630-621-4804 Cell: 630-777-9291 On Thu, Aug 6, 2015 at 10:39 PM, Mike Hammett wrote: > I think they have opened up new markets al

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

dude, how much is your per port cost? On Fri, Aug 7, 2015 at 7:37 PM, John Blake wrote: > If you need 48 ports per 1RU, then I would recommend you consider the > Huawei S5700-52X-LI-48CS-AC. They do need moderate cooling, but have > excellent cost-per-port and all the features you would want fo

Re: [AFMUG] EPMP Failure

You might be thinking of sloths. -Original Message- From: Jay Weekley Sent: Friday, August 07, 2015 6:27 PM To: af@afmug.com Subject: Re: [AFMUG] EPMP Failure Aren't ant eaters slow? Maybe I could use one to describe my competition. Mathew Howard wrote: But a fat ant eater would be

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

If you take the entire switch and divide the costs just into the number of customer facing ports, the cost comes out to $41.66 per port. For a switch platform that includes all licensing costs, stacking, 10G uplink ports, and Enterprise feature set, I have found that to be a very good price. I wo

[AFMUG] ToughSwitch 8 PRO

I have a few of these laying around. I removed them after I realized they don't like a mix of 100Mb and Gigabit. I really want to use them though rather than let them collect dust. Does anyone have a setup where these are working for them? Or are they just a lost cause? Thank you, Brett A Mans

Re: [AFMUG] Is anyone here doing ePTP at all?

We have 3 links up so far. One has been running several months the others about a month. All on non GPS eptp. Best regards, Brandon Yuchasz GogebicRange.net www.gogebicrange.net From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mathew Howard Sent: Fr

[AFMUG] test

Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542 r...@triadwireless.net www.triadwireless.net "Experience is a hard teacher because she gives the test first, the lesson afterwards." - Vern Law

Re: [AFMUG] Small antenna for PTP, dual pol

It’s not always about size. http://www.l-com.com/wireless-antenna-4-x-4-inch-flat-panel-mimo-antennas Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Friday, August 7, 2015 12:14 PM To: af@afmug.com Subject: Re: [AFMUG] Small antenna for PTP, dual pol He probably means

Re: [AFMUG] Is anyone here doing ePTP at all?

Brandon have u had any interference issues on non GPS ? -Original Message- From: "Brandon Yuchasz" Sent: ‎8/‎7/‎2015 7:12 PM To: "af@afmug.com" Subject: Re: [AFMUG] Is anyone here doing ePTP at all? We have 3 links up so far. One has been running several months the others about a month

Re: [AFMUG] Is anyone here doing ePTP at all?

No its worked flawless for us. I am keeping the dishes separated horizontally by 10’ at all the sites. Although I don’t have any specific reason for doing so other then I had the room to do it. I am considering GPS but only because I can squeeze one more link into the spectrum by eliminating th

Re: [AFMUG] test

I don't want to test anything but an ice cold Tecate...boy Phx was hot this week. I drove from bitchin 62 degrees in Flagstaff to 102 Phx and Tucson Wednesday on way home. On Aug 7, 2015 6:13 PM, "Rory Conaway" wrote: > > > > > *Rory Conaway **• Triad Wireless •** CEO* > > *4226 S. 37th Street •

Re: [AFMUG] test

I hope tucson and phoenix is a bit cooler next week. We're flying in on Thursday to AZA (Mesa), then spending a couple of days in the Tucson area, then back to phoenix for a conference M-S of the following week. Fortunately the conference is 100% indoors and in a very nice air conditioned resort.

Re: [AFMUG] test

It’s not that hot but it’s muggy as heck. Keeps raining every other night in both cities. Got dumped on again tonight in Phoenix. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Forrest Christian (List Account) Sent: Friday, August 07, 2015 5:51 PM To: af Subject: Re: [AFMUG] test

Re: [AFMUG] test

Success? On Fri, Aug 7, 2015 at 7:13 PM, Rory Conaway wrote: > > > > > *Rory Conaway **• Triad Wireless •** CEO* > > *4226 S. 37th Street • Phoenix • AZ 85040* > > *602-426-0542 <602-426-0542>* > > *r...@triadwireless.net * > > *www.triadwireless.net * > > > > *“Ex

Re: [AFMUG] ToughSwitch 8 PRO

I can't recall last time I saw a switch that didn't gracefully mix 100 and 1000mbit - what are the symptoms? What did Ubiquiti tech support say? --Original Message-- From: Brett A Mansfield Sender: Af To: af@afmug.com ReplyTo: af@afmug.com Subject: [AFMUG] ToughSwitch 8 PRO Sent: Aug 7, 2

Re: [AFMUG] ToughSwitch 8 PRO

I never went to their support. I needed to fix it right away. Before putting in the TS I was getting close to 100mb per access point on RM5s, but after putting it in I was getting a max of 30mb. I switched it back out for Mikrotik and now I get 80-95Mb again. Thank you, Brett A Mansfield Silver

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

Unfortunately it is Huawei. On Friday, August 7, 2015, John Blake wrote: > If you take the entire switch and divide the costs just into the number of > customer facing ports, the cost comes out to $41.66 per port. For a switch > platform that includes all licensing costs, stacking, 10G uplink p

Re: [AFMUG] Another neighborhood on fiber, sexy sexy!

Waiting for you to figure out a GPON company you like long term so we all can steal it. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Chuck Hogg" To: af@afmug.com Sent: Friday, August 7, 2015 5:10:32 PM Subject: Re: