Re: [AFMUG] 48 vdc Inverteres for Data Room 6kw ?

You could also look into individual 1500W meanwell true sine wave inverters, running in parallel off your 48vdc battery bus. You can parallel as many as you need. Don't load any individual one with more than 1300W constant. Wire up the output from each meanwell to 120vac PDUs with amperage meter in

Re: [AFMUG] Ubiquiti ER-X

Also have not seen one fail yet. Most likely to die thing is probably the AC to DC wall wart which is cheap. Uses the same barrel size as many 3.5" external HDD which are typically 12vdc 1.5a adapter. On Wed, May 9, 2018, 7:37 AM Matt Hoppes wrote: > Have not had one fail yet since they came out

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

Just curious... does the rackinjector show the port in a tripped state afterwards? I'm assuming this boots just fine without the surge suppressor? On Wed, May 9, 2018 at 9:56 AM, Sam Lambie wrote: > FYI, > > I installed the gas tube version on a gigabit Packetflux Powered Medusa > the other we

Re: [AFMUG] OT such a deal

Congrats .#2 son? Now you are Charlie Chan? Jaime Solorza On Wed, May 9, 2018, 1:18 PM wrote: > My #2 son just got accepted to grad school, government will pay for school > and keep his payroll running while he is in school. (He is an EE at Hill > Air force Base). Such a good deal. I am

Re: [AFMUG] OT such a deal

Very nice! On Wed, May 9, 2018 at 2:18 PM, wrote: > My #2 son just got accepted to grad school, government will pay for school > and keep his payroll running while he is in school. (He is an EE at Hill > Air force Base). Such a good deal. I am proud and jealous all at the same > time. >

[AFMUG] OT such a deal

My #2 son just got accepted to grad school, government will pay for school and keep his payroll running while he is in school. (He is an EE at Hill Air force Base). Such a good deal. I am proud and jealous all at the same time.

Re: [AFMUG] Good tower for 100'

Sounds like roughly $12k total. Thanks much! That helps a lot. From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Wednesday, May 9, 2018 1:51 PM To: af@afmug.com Subject: Re: [AFMUG] Good tower for 100' Not really sure as we did most of it ourself. Probably $2000 for the

Re: [AFMUG] Good tower for 100'

Not really sure as we did most of it ourself. Probably $2000 for the foundation and another $1500 for erection. From: James Howard Sent: Wednesday, May 9, 2018 12:44 PM To: 'af@afmug.com' Subject: Re: [AFMUG] Good tower for 100' What did you end up spending to install it? From: Af [mail

Re: [AFMUG] Good tower for 100'

What did you end up spending to install it? From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Wednesday, May 9, 2018 1:40 PM To: af@afmug.com Subject: Re: [AFMUG] Good tower for 100' $5,721.00 + Tax and shipping $7,889.00 From: James Howard Sent: Wednesday, May 9, 2018

Re: [AFMUG] Good tower for 100'

$5,721.00 + Tax and shipping $7,889.00 From: James Howard Sent: Wednesday, May 9, 2018 11:40 AM To: 'af@afmug.com' Subject: Re: [AFMUG] Good tower for 100' What did it end up costing? From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Wednesday, May 9, 2018 11:43

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

Nookular Surge Suppressor™ -- Original Message -- From: "Steve Jones" To: af@afmug.com Sent: 5/9/2018 1:34:18 PM Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa i vote MT radioactive tubes On Wed, May 9, 2018 at 11:41 AM, wrote: They are light sensitive if th

Re: [AFMUG] Good tower for 100'

What did it end up costing? From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Wednesday, May 9, 2018 11:43 AM To: af@afmug.com Subject: Re: [AFMUG] Good tower for 100' Rohn SSV. From: James Howard Sent: Wednesday, May 9, 2018 10:30 AM To: 'af@afmug.com' Subject: Re: [AFMU

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

i vote MT radioactive tubes On Wed, May 9, 2018 at 11:41 AM, wrote: > They are light sensitive if they are made out of glass. Not so much with > the ceramics. > The mixture of gasses set the breakdown voltage. The ones I use fire at > about 90 volts. > > I remember working at sites where the g

Re: [AFMUG] Good tower for 100'

Rohn SSV. From: James Howard Sent: Wednesday, May 9, 2018 10:30 AM To: 'af@afmug.com' Subject: Re: [AFMUG] Good tower for 100' Dredging up an old thread here. What did you end up going with Chuck? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Monday, October 9, 201

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

They are light sensitive if they are made out of glass. Not so much with the ceramics. The mixture of gasses set the breakdown voltage. The ones I use fire at about 90 volts. I remember working at sites where the gas tubes were filled with radioactive gases. From: Adam Moffett Sent: Wed

Re: [AFMUG] Good tower for 100'

Dredging up an old thread here. What did you end up going with Chuck? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Monday, October 9, 2017 2:32 PM To: af@afmug.com Subject: Re: [AFMUG] Good tower for 100' Needs to be self supporting. From: Chuck McCown Sent: Monday, Oc

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

I thought it took hundreds of volts to trigger a gas tube. Aren't some of them light sensitive? What if the APC chassis was near a window and getting direct sunlight? -- Original Message -- From: ch...@wbmfg.com To: af@afmug.com Sent: 5/9/2018 12:00:20 PM Subject: Re: [AFMUG] mccownt

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

Funny, the product is so simple. Jacks. Tubes. Electrodes with gas between them from the Ethernet lines to ground. The only way the tubes can affect the circuit is if they are ionized, which means a high voltage coming from somewhere. could be coming from a ground loop or ??? Or a tube

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

https://www.mccowntech.com/product/cat6-100-gas-discharge-tube-rack-mount-surge-protector/ From: Steve Jones Sent: Wednesday, May 9, 2018 9:32 AM To: af@afmug.com Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa What's this gas tube product placement? I want to see these

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

FYI, I installed the gas tube version on a gigabit Packetflux Powered Medusa the other week and no go. The radio boots up for about 25 seconds, and then shuts down. On Wed, May 9, 2018 at 9:54 AM, wrote: > I am going to chase this down. Only certain types of products have the > issue it seems

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

I am going to chase this down. Only certain types of products have the issue it seems. I am going to try to add solid state to the gas tubes using a different design that eliminates the steering diodes. Seems like the steering diodes are causing the problem in some situations. From: George

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

No diodes, just gas-tube for large surge event suppression. Obviously not as much protection though. I'm seeing more CRC errors than I'm comfortable with on the cards with diodes. Rev G is definitely better though. I've broken the shield at various sites while testing to rule out any potential

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

What's this gas tube product placement? I want to see these On Wed, May 9, 2018, 9:51 AM wrote: > Thanks, yeah nothing fit well next to the thin pcbs. > > Odd, got some test results back from George yesterday. Some types of > equipment has CRC errors with some of our surge suppressors. Trying

Re: [AFMUG] ePMP 300 - no DFS (yet?)

It is just trying to save you from FCC troubles Dave. And it will also not open the pod bay doors Dave. From: Adam Moffett Sent: Wednesday, May 9, 2018 7:39 AM To: af@afmug.com Subject: [AFMUG] ePMP 300 - no DFS (yet?) So we got some ePMP 300 CPE in, and if we check the boxes to enable DFS

Re: [AFMUG] OT: One space versus two spaces (again)

The doctor my mom took me to when I was little would hunt and peck out a prescription with a cigarette dangling from his lips. I was amazed how well he could type. -Original Message- From: Adam Moffett Sent: Wednesday, May 9, 2018 7:38 AM To: af@afmug.com Subject: Re: [AFMUG] OT: One

Re: [AFMUG] 48 vdc Inverteres for Data Room 6kw ?

I would recommend them. https://www.exeltech.com/products/inverters/inverters-above-2k-watt-mx/ Never had a problem with them. You need either a control card or a master inverter in each rack. I prefer the control card so all the inverter modules are the same. I also like the transfer switc

Re: [AFMUG] Ubiquiti ER-X

Good to hear, thanks. -- Original Message -- From: "Matt Hoppes" To: af@afmug.com Sent: 5/9/2018 10:37:53 AM Subject: Re: [AFMUG] Ubiquiti ER-X Have not had one fail yet since they came out. On May 9, 2018, at 10:36, Adam Moffett wrote: Anybody have any opinions on the reliability

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

Thanks, yeah nothing fit well next to the thin pcbs. Odd, got some test results back from George yesterday. Some types of equipment has CRC errors with some of our surge suppressors. Trying to identify the bad combinations. Good thing is that our gas tube only products seem to be flawless w

Re: [AFMUG] Ubiquiti ER-X

Have not had one fail yet since they came out. > On May 9, 2018, at 10:36, Adam Moffett wrote: > > Anybody have any opinions on the reliability of Ubiquiti ER-X and ER-X-SFP > routers? > > I was thinking they might be useful for a customer premises > router/CPE.one which we control, not

[AFMUG] Ubiquiti ER-X

Anybody have any opinions on the reliability of Ubiquiti ER-X and ER-X-SFP routers? I was thinking they might be useful for a customer premises router/CPE.one which we control, not the customer.

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

Promises promises :) On Mon, Mar 26, 2018, 7:44 PM Forrest Christian (List Account) < li...@packetflux.com> wrote: > Let me rephrase..to be more complete. > > There are some docs, they're hard to find. They're also not very pretty > and assume knowledge that some of our customers don't have. T

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

Matt, exactly which card is that? Is that gas-tube only? I did some extensive testing at a site yesterday for Chuck. The more data we can give him the better we'll all be. On 5/9/2018 9:08 AM, Matt wrote: Chuck, Like form factor of new arrestors much better. Thicker PCB and RJ45 not as tall.

Re: [AFMUG] ePMP 300 - no DFS (yet?)

Interestingly it only throws the error if you enable 40mhz channel size. On 20mhz channel it's no problem. -- Original Message -- From: "Dave" To: af@afmug.com Sent: 5/9/2018 10:05:01 AM Subject: Re: [AFMUG] ePMP 300 - no DFS (yet?) Verify power settings and review error message. DFS

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

Chuck, Like form factor of new arrestors much better. Thicker PCB and RJ45 not as tall. They do not fit well next to your last thin pcb version though. Did not care for the thin pcb and tall RJ45 at all. Swapped out 4 PxP450i APC arrestors to these 17 hours ago. So far flawless even at 1000ba

Re: [AFMUG] ePMP 300 - no DFS (yet?)

Verify power settings and review error message. DFS has very low power settings. Also ant gain setting can throw an error On 05/09/2018 08:39 AM, Adam Moffett wrote: So we got some ePMP 300 CPE in, and if we check the boxes to enable DFS channels they toss an error and won't save the settings.

Re: [AFMUG] crowdsource troubleshooting

You are self aware? Jaime Solorza On Tue, May 8, 2018, 11:03 PM Philip Rankin wrote: > Hey Josh, > > The new ePMP gigabit interfaces will work both polarities. You can > actually use the old PMP100 power supplies with no issues that I have had > so far. I have only left a couple in that mode

[AFMUG] ePMP 300 - no DFS (yet?)

So we got some ePMP 300 CPE in, and if we check the boxes to enable DFS channels they toss an error and won't save the settings. Anybody know what the deal is here? Coming in the future?

Re: [AFMUG] OT: One space versus two spaces (again)

They taught me in high school to double tap the spacebar after a sentence. That was 1996. No mention of one space that I recall. Almost nobody was using type writers at that point. At least they taught me to type and I'm glad for it. I have a colleague who hunts and pecks with two fingers

Re: [AFMUG] 48 vdc Inverteres for Data Room 6kw ?

Chuck, Would you recommend them? How solid are they? What is the wattage of the configuration on ebay? Do they charge the batteries? From: Af mailto:af-boun...@afmug.com>> on behalf of Chuck McCown mailto:ch...@wbmfg.com>> Reply-To: "af@afmug.com" mailto:af@afmug.com>> Date