That reminds me of the old TV show, Connections.
I loved that show and it ended way too soon. I wonder it its kicking around on
the net somewhere……….
On Apr 28, 2017, at 11:04 AM, wrote:
> One could argue that a management shooting employees that wanted to organize
> or strike has resulted
, what? 10 years? Maybe more? I may get bored and
return to lurk.
Sincerely,
Dan Petermann
Sr. RF Engineer
Cerento & Wyoming.com
(until tomorrow at 5pm Mtn, the I’m FREE)
The best advice I can give you is to know where in the book the information is.
Its an open book test and if you are a fast reader, knowing how the book is put
together is the key.
On Apr 26, 2017, at 8:00 PM, Paul McCall wrote:
> How hard is it to pass the LV certification test? I am think
When its easier to give your installers magnetic than to make them use true.
On Apr 20, 2017, at 2:08 PM, Sean Heskett wrote:
> True.
>
> The only time really to use magnetic is for navigation. (I'm sure there are
> other reasons too)
>
> -Sean
>
> On Thu, Apr 20, 2017 at 12:04 PM Smarte
Did they get the DFS figured out yet?
It seems to me there was a problem using the DFS bands, but I can’t seem to
find what it was.
I got mine about a month ago.
They recommend studying about 5-6 weeks before taking the test. I did it in
considerably less time but I am good at taking tests so your mileage may vary.
Go here, sign up and download everything: https://jrupprechtlaw.com
There are a few other websites that I can
Well you didn’t get accused of being a misogynist, rapist and a member of the
patriarchy. so, winning!
On Apr 5, 2017, at 9:53 AM, Chuck McCown wrote:
> Today there is a minor protest of sorts about women getting unwanted
> attention. One of the young ladies in the crowd started a dial
This works flawlessly, just put it in.
Thanks again for the help
On Mar 2, 2017, at 3:53 PM, Dan Petermann wrote:
> Thank you for the info!
>
> On Mar 2, 2017, at 12:22 PM, Chuck McCown wrote:
>
>> OK, so if you put + on the left pin and – on the right pin, then jumpers
I am adding another Telrad sector to one of our towers and tightening the
beamwidth on the sectors. The lead time on a 33 degree Alpha antenna is 10
weeks and I need 4 of them.
This is the antenna:
http://alphaantennas.com/products/single-band/3300-3800mhz-sector/aw3452/
Does anyone know of a
Does anyone know who makes the Cambium 900MHz 450 sector antenna?
I’m looking for the pattern file.
py, the answer was 200.
>
> Or are you asking about loading and performance?
>
> -Original Message- From: Dan Petermann
> Sent: Monday, March 06, 2017 4:11 PM
> To: af@afmug.com
> Subject: [AFMUG] 450M
>
> How many SMs can a 450M handle?
>
> I can�t seem to find the answer in the manual
How many SMs can a 450M handle?
I can’t seem to find the answer in the manual
ground?
>
> From: Dan Petermann
> Sent: Thursday, March 02, 2017 11:30 AM
> To: af@afmug.com
> Subject: Re: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT POE
> -POWERINSERTER/SURGE PROTECTOR
>
> Excellent! The polarity is +48vdc.
>
>
> On Mar 2, 2017, at
give you the polarity info?
>
> From: Dan Petermann
> Sent: Thursday, March 02, 2017 10:55 AM
> To: af@afmug.com
> Subject: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT POE -
> POWERINSERTER/SURGE PROTECTOR
>
> Chuck,
>
> do you know if the 800-GIGE-POE-APC will wo
Chuck,do you know if the 800-GIGE-POE-APC will work to power up a Exalt ExtremeAir radio?We are being told that the DC power supplies won’t be available until June.
ExtremeAir power pinout.pdf
Description: Adobe PDF document
Are any of you running 30MHz channels of your 450 gear?
All of our customers are installed at a minimum of 4X. We are consistently
hitting 100% downlink on some APs. Changing to a 30MHz wide channel should
alleviate that issue (somewhat), correct?
Who has the highest capacity 24Ghz radios?
A customer is wanting a 1.8 mile link 1Gbs full duplex link as a back up.
I like this guys response to that issue at UM. I imagine he really pissed off
his professors.
https://www.washingtonpost.com/news/education/wp/2016/10/07/a-university-told-students-to-select-their-gender-pronouns-one-chose-his-majesty/
On Feb 23, 2017, at 1:49 PM, Jason McKemie
wrote:
> Wher
http://wirelessestimator.com/articles/2017/industrys-first-successful-flying-cow-live-test-is-made-by-att/
Do you know what to select when using a CTM?
On Feb 17, 2017, at 12:53 AM, George Skorup wrote:
> If the 1PPS LED is blinking on the daisy-chained SyncInjector, then I'd say
> it's fine with a straight-through cat5.
>
> The ePMP1000 GPS radios will take 802.3af or Canopy -4/5 +7/8 at either
Yes, that is an offense. The person who dropped the classified material did not
take appropriate action to prevent you from seeing it. Depending upon the
classification level, that guy could be in serious trouble.
I was one of two people who had a TS-SBI clearance at the facility I worked in.
T
Perhaps a little more on topic, what do you think about the possibility of Ajit
Pai becoming FCC chairman?
That was it. Thank you
On Jan 17, 2017, at 12:52 PM, Larry Smith wrote:
> Pretty sure lldpd is Link Layer Discovery Protocol
> and I pretty much always turn it off, or set to
> receive only.
>
> --
> Larry Smith
> lesm...@ecsis.net
>
> On Tue January 17 2017 10:43
I get the following in the syslog for an ePMP force 110 used as a BHM and
connected to a Force 200 BHS.
Here is the entry: Jan 17 08:31:24 FCSO BHM lldpd[2170]: unable to get system
name
It shows up every 10 minutes.
I found this while looking for a reason the link drops randomly and doesn’t
I have a customer with a misbehaving PTP800 link.
It drops when it rains or is foggy and I’m trying to pin down why it is
dropping. My guess is the coax has a poor seal on it.
Is there any way to tell if the modem is losing communication with the RF head?
I know in Dragonwave radios, using the
does anyone know how to make one?
I know they are a purchase item or was supposed to come with the radio, but
this link was put up 4 years ago for a client. They have no clue what the
password was changed to or where the reset plug is.
"The left has been way over dramatic putting visions of children crying while
jackbooted thugs kick their door in and drag papa off to the gulag. "
You mean like this:
Except in this case it was the kid they dragged off.
On Nov 9, 2016, at 11:09 AM, That One Guy /sarcasm
wrote:
> A public
On Oct 20, 2016, at 2:29 PM, wrote:
> Did you sit on it or was it a result of a fall?
>
> From: Adam Moffett
> Sent: Thursday, October 20, 2016 2:25 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] Cambium Beta Contract
>
> Damn right...I have a UBNT device inside of me right now.
>
>
> ---
gt; of Angier Things:
>
> http://boingboing.net/2016/10/19/trumps-angrier-things.html
>
>
> -Original Message-
> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dan Petermann
> Sent: Thursday, October 20, 2016 1:22 PM
> To: af@afmug.com
> Subject: Re: [AFMUG
And that is the problem. People continue to think they need to vote for the
lesser of two evils, never realizing they are still voting for EVIL!
Vote for anyone but these two idiots.
But, but, but…… the other candidate that I hate more will win!
Big deal, what is more important to you:
A. The
http://www.merriam-webster.com/dictionary/mutt
Full Definition of mutt
1
: a stupid or insignificant person : fool
2
: a mongrel dog : cur
Whether or not that applies is up to the individual.
That is mild compared to the past:
John Adams supporters speaking of his former VP Thomas Jef
Does anyone know what ETSI TS3 means in reference to side lobes, cross
polarization, and F/B ratio?
An example can be found here:
http://www.mars-antennas.com/sites/mars/UserContent/Files/PdfFromCatalogue/MA-WA36-DP25.pdf
Will a ePMP radio get sync from a CMMmicro?
But do they have the Turbo button pushed?
On Sep 13, 2016, at 12:25 PM, That One Guy /sarcasm
wrote:
> That website is top of the line, hosted on nothing but the best 486dx4
> architecture and maximized performance of the full 4mb edo ram, this thing is
> busting with the hottest new DOS 6.0
on.
On Sep 13, 2016, at 8:14 AM, Dave wrote:
> Try 169.254.1.1
>
>
>
> On 09/12/2016 11:11 AM, Dan Petermann wrote:
>> What is the default IP of these radios?
>>
>> I�m using 192.168.1.1 but they do not respond. I got this out of the user
>>
What is the default IP of these radios?
I’m using 192.168.1.1 but they do not respond. I got this out of the user guide
v8.3 and I’m plugged into the management port
I hear that, I’m 50, think I’m still in my 20’s and wake up some days feeling
like I’m 80.
I’m really starting to understand the saying “youth is wasted on the young"
On Sep 8, 2016, at 11:19 AM, Jaime Solorza wrote:
> I am 60 and act like 6 year old.. Feel like 20 year old once in a while a
Does anyone know what the 5.1 eirp limits are in a PMP network, SM to AP?
I’m fairly certain it is +53dBm but not positive.
, Dan Petermann wrote:
> I think this will do the job.
>
> Thank you very much for your help!
>
> I really want one of these
> (http://www.aaronia.com/products/antennas/IsoLOG-3D/) but the boss thinks
> that 18K is a bit much.
>
> On Sep 1, 2016, at 12:02 PM, Chuck
> One of these:
> https://www.fairviewmicrowave.com/sma-circulator-17-db-isolation-4-8-ghz-sfc4080b-p.aspx
> One of these:
> https://www.fairviewmicrowave.com/sma-circulator-16-db-isolation-2-4-ghz-sfc2040a-p.aspx
>
> A SMA T and two SMA 50 ohm loads.
>
> -Original Message- From: Dan P
two antennas?
> Need a clearer picture.
>
> -Original Message- From: Dan Petermann
> Sent: Thursday, September 01, 2016 11:09 AM
> To: af@afmug.com
> Subject: [AFMUG] Diplexer or combiner
>
> Does anyone know where I can find a diplexer that can combine the 3.65 &
Does anyone know where I can find a diplexer that can combine the 3.65 & 5.7GHz
bands?
I need one in the within 3 weeks.
They probably mean fiber to the antenna, which is technically wrong also. I
suppose its easier to say than "fiber to remote radio unit with an antenna
attached” (FtRRUwaAA).
On Aug 26, 2016, at 9:47 AM, Bill Prince wrote:
> Someone please explain what a "fiber optic antenna" is?
>
> "Alphab
Isn’t the spectrum available for use until the PAL license holder actually
starts transmitting?
Isn’t that the whole point of the database?
On Aug 24, 2016, at 2:02 PM, Rick Harnish wrote:
> There are approximately 500,000 PAL licenses, (7) 10 MHz per license per
> census tract. No company ca
How long does it take to get a license key for a PTP820s?
I’ve been waiting about 30 min so far
Check out Xetawave (http://www.xetawave.com/Products/Overview.shtml) 57Kbps in
a 12.5KHz channel. They are ethernet based.
On Jun 8, 2016, at 9:49 PM, Jaime Solorza wrote:
> While working at Storm Water site today, one of the water Co. SCADA guys came
> by... he discussed that they are lookin
ease. We are looking to have the
> official release within 2 weeks, but depends on this last issue.
>
> Regards,
> -Aaron
>
>
>
>
> On 4/25/16, 4:30 PM, "Af on behalf of Dan Petermann" behalf of danpartym...@yahoo.com> wrote:
>
>> Has anyone heard when 14.1.2 will be out?
Can someone tell me what a SM transmitting in the 5.1GHz band is allowed for
EIRP?
I can’t seem to find a straight answer.
I thought some of you guys might enjoy this: http://tinyurl.com/zyjmlvj
Does anyone know when the Trango next gen radios are going to hit the market?
Where can I find a spec sheet?
Has anyone heard when 14.1.2 will be out?
We are deploying three sectors this morning so I can’t speak to how many
customers yet.
AP capacity varies by channel width and distance.
Max distance is 39km (24.23 miles).
98Mbs down / 7.9Mbs up with current SM with a 20MHz channel (conf2,ssf1).
SM is 2 stream down link and 1 stream up. SM
Everything you mentioned below was perpetrated by the democrat party.
Jim Crow laws were created and enforced by the democrat party.
Japanese camps - Executive order from President Roosevelt (D)
Bracero Program - Executive order from President Roosevelt (D)
Democrats controlled both the house
Just checking, I haven’t received any mail since this yesterday.
Dwayne Elizondo Mountain Dew Herbert Camacho for President!
On Mar 5, 2016, at 2:58 PM, Gino Villarini wrote:
> vote for Pedro
>
> Sent from Outlook Mobile
>
>
>
>
> On Sat, Mar 5, 2016 at 1:48 PM -0800, "Chuck McCown" wrote:
>
> The whole field gags me. There is nobody to vote for this
On Mar 4, 2016, at 6:23 AM, Jay Weekley wrote:
> It's likely going to be a long 4 years regardless of who wins. The best
> candidates have already dropped out. Probably because they weren't
> flamboyant enough to get attention.
>
> Lewis Bergman wrote:
>>
>> It really is a sad state of a
No, the Canadian one https://www.youtube.com/watch?v=bGTznIy6i4w
On Feb 25, 2016, at 4:27 PM, Ken Hohhof wrote:
> What, to build Trump’s wall?
>
> From: Jaime Solorza
> Sent: Thursday, February 25, 2016 5:03 PM
> To: Animal Farm
> Subject: Re: [AFMUG] Simple to make
>
> Doesn't work...they
What ever happened with this version and the 5.4 band?
Safe to upgrade or ???
I assume they can be used in a PTP set up, but can they?
2nd question, can they sync in a PTP setup?
I am needing to find an alternative to Cambium PN: 85010089052 11GHz 4’ dish.
Do other companies make a direct mount 11GHz 4’ dish for a PTP800?
We have two 11GHz links on the same freqs. One V and one H pol. These are dual
links, 2 - 40Mhz channels. The radios are Dragonwave, one Quantum and the other
a Horizion Duo.
We had to replace the IDU of the Quantum with a DUO and put the link into DUO
compatibility mode.
After replacing the
I have 2 - 40MHz 11Ghz channel pairs with vertical polarity. I can get an
additional 40MHz xpic channel.
Any idea of how to get 3 vertical channels and 1 horizontal on a single dish?
There are no additional channels available at this site. Link is 22 miles long.
Is the ePMP line GPS compatible with the100 series radios?
Can somebody send me a non-corrupted mib file?
The one on the website is corrupt.
That sounds like Teligent. I used to work for them in the Miami area. Rode the
gravy train into the ground on that one.
I knew they were going down when the announced “Project Bud”. Basically they
wanted to tell the investors they had X number of buildings with an antenna.
That is all they had,
We are looking for tower cameras to monitor our solar sites. We just want to be
able to tell if we need to send someone out to clear off the snow.
Any recommendations? The cheaper the better but they must work in the cold.
gt; Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Fri, Dec 18, 2015 at 3:46 PM, Dan Petermann wrote:
> I have a link that will not allow me to set the “Uplink Max Rate” to anything
> higher than MCS-11.
>
> the link is up at -54dBm. Is there any reason I can’t do that?
>
I have a link that will not allow me to set the “Uplink Max Rate” to anything
higher than MCS-11.
the link is up at -54dBm. Is there any reason I can’t do that?
Does the all outdoor 820 use single or multimode fiber?
d a
> piece of green mylar tape over the waveguide interface. It's just a
> dust/moisture cover for shipping. Most of the Exalt install guides say to
> take the tape off of the antenna if installed, and leave the tape on the
> radio if installed.
>
> On 12/8/2015 4:56 PM, Da
m
> Subject: Re: [AFMUG] Exalt ExtremeAir
>
> multipath or on a side lobe. did you peak the signals in all 4 directions?
>
>
> On Tue, Dec 8, 2015 at 3:24 PM, Dan Petermann wrote:
> We are installing a pair of ExtremeAir radios and are having an odd issue.
>
> At on
We are installing a pair of ExtremeAir radios and are having an odd issue.
At one end the rx is -41V / -31H.
The far end the rx is -35V / -32H.
Any idea what could cause a 10dB difference in polarizations?
This is a pretty good article on stopping power.
http://www.breachbangclear.com/the-truth-about-stopping-power-anatomy-first/
Here is a very short summary: Unless you separate the brain from the spinal
column, one shot stopping power really isn’t true in most cases.
On Dec 7, 2015, at 10:0
7
> 1111135 11625 Band 7
> 1211175 11665 Band 7
>
> -Original Message-----
> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dan Petermann
> Sent: Wednesday, December 02, 2015 5:24 PM
> To: af@afmug.com
> Subject: [AFMUG] PTP800 11GHz bands
>
> Is there a document that shows the sub-bands for the 11GHz radios?
Is there a document that shows the sub-bands for the 11GHz radios?
I’d use LDF4.5-50a, (5/8” heliax), loss at 3650MHz is 3.5dB/100’. If its too
stiff to bring right into the antenna and AP, then use short LMR-400 jumpers.
http://www.commscope.com/catalog/andrew/product_details.aspx?id=1330
On Dec 1, 2015, at 3:38 PM, Jay Weekley wrote:
> Yes, 3.65ghz. Pure
Have these radios been out long enough to go thru a winter or two?
I like the specs of the radio except for the temp specs.
I’m curious if anyone has had these up in -40 to -45F temps.
LTE can be set for equal time or equal rate. Equal rate will drag down the
thruput of all users.
Equal time will only impact the user with a poor signal. If everyones signal is
great and one users radio signal is bad, that user only gets the thruput that
can be crammed into his timeslot becaus
What does vector error indicate?
Its is the person, not the gun.
Any number of household chemicals can be used to maim or kill. There are
gasses, poisons and explosives that can be manufactured from legal to purchase
chemicals.
The gun gets singled out because it it easy to conceal and has that “scary”
factor.
Should we ou
We have a client on a FM tower.
FM is 50KW, clients 11GHz BH is 200’ below FM antenna.
Should we contact the FM station or should the power levels be in the safe
range?
We have RF exposure meters. I’m just trying to cover the bases as the tower is
4 hours away.
When listing the temp ratings of equipment, is it the ambient air temp or
equipment temp that is listed?
I could see a situation where the air temp is -40 but due to the heat of the
electronics the internal temp is, say -25.
I asked that question once and the answer I got was Hemp.
I don’t think that is correct….
On Aug 31, 2015, at 3:10 PM, Adam Moffett wrote:
> I've always wondered what the "H" stood for in that exclamation.
> He-man? Holy?
>
> On 8/31/2015 5:07 PM, That One Guy /sarcasm wrote:
>> Jesus
No, its “what difference at this point does it make!” Preferably in a shrill
voice.
On Aug 26, 2015, at 2:36 PM, Jaime Solorza wrote:
> No. Its, " I didn't do nothing!".
>
> On Aug 26, 2015 11:33 AM, "That One Guy /sarcasm"
> wrote:
> Thats right man, never admit nuthin to them feds!!
>
>
or this bug?
>
> On Mon, Aug 17, 2015 at 10:30 AM, Dan Petermann wrote:
> I haven’t. Seems to only happen on 450 radio.
>
>
> On Aug 17, 2015, at 7:35 AM, Eric Muehleisen wrote:
>
>> Bump. Anyone else having this issue? Dan, did you find a resolution?
>>
>> On
I haven’t. Seems to only happen on 450 radio.
On Aug 17, 2015, at 7:35 AM, Eric Muehleisen wrote:
> Bump. Anyone else having this issue? Dan, did you find a resolution?
>
> On Thu, Jun 11, 2015 at 3:20 PM, Dan Petermann wrote:
> I have “Gather SM Passwords and Extract IP Addr
Yep
http://www.radiowaves.com/en/product/shp6-6
On Aug 13, 2015, at 5:07 PM, Josh Luthman wrote:
> 72 ftb?!
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Aug 13, 2015 7:04 PM, "Dan Pe
gt; problem.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Aug 13, 2015 6:23 PM, "Dan Petermann" wrote:
> I just received a PCN on a site where 6GHz is very congested.
>
> The li
I just received a PCN on a site where 6GHz is very congested.
The link I am concerned with is 29.65MHz away from our existing link and
opposite polarity. Their far end is 3.73 degrees away from ours in azimuth.
Their near end is 273’ away.
Thoughts?
Concerns?
What is the minimum amount of satellites needed for a proper GPS sync pulse?
And does that differ across products (CMM, CTM, SyncPipe, etc.)?
Well, you can advertise that you sell a 450Mbs radio that holds the world
record for distance and let your customers infer that they mean 450Mbs at that
distance.
On Aug 10, 2015, at 8:43 AM, Lewis Bergman wrote:
> Again, I see no point in records as it relates to the WISP business anyway.
>
+∞
On Aug 6, 2015, at 11:59 AM, Brian Meredith
wrote:
> Trying to fill out a support request and it doesn't seem to accept the
> request. Captcha field turns red and just reloads, even though I'm 100% sure
> I'm putting in the correct entry.
> Having to fill out a stupid contact form every ti
Does anyone know if you can run a link test using the install color code?
Does anyone know of a product that can aggregate 3 DSL lines to appear as 1
30Mbs connection?
A drone with a phased plasma rifle in the 40 watt range
On Jul 17, 2015, at 1:09 PM, That One Guy /sarcasm
wrote:
> Im down with drones filled with agent orange. It makes it totally legit
> because our logo is orange
>
> On Fri, Jul 17, 2015 at 2:05 PM, Ken Hohhof wrote:
> Internet is a basi
t;
> Rick Harnish
> Broadband Consultant & Industry Analyst
> 260-307-4000 cell
> Skype: rick.harnish.
> Twitter: @rharnish
>
>
> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dan Petermann
> Sent: Thursday, July 16, 2015 12:59 PM
> To: af@afmug.com
> Subjec
is it just me, or does the register link not work?
On Jul 16, 2015, at 9:29 AM, Rick Harnish wrote:
> Licensed Broadband Spectrum Webinar
> Presented by Bob Finch of Select Spectrum
>
> Event status:
> Not started (Register)
> Date and time:
> Thursday, July 16, 2015 12:00 pm
> Central Daylig
Crack! Crack is what they need.
Judging by the time I spent in Florida installing 18 & 24GHz links for
Teligent, crack is what you need.
Every rooftop I was on that had recently been re-roofed was covered in crack
vials.
If nothing else, they will be happy and they won’t quit as they will los
you could just go there and tell them you work for the phone company and gain
access to the phone closet and put it there. Even make up a employee card in
case they want proof.
Place it inside an old wifi router case with labels stating “do not unplug”
“internet service” and tell them you are d
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dan Petermann
> Sent: Wednesday, July 01, 2015 10:27 AM
> To: af@afmug.com
> Subject: [AFMUG] 3650 registration
>
> Is there someplace on the Cambium website that has a tutorial on registering
> locations?
>
>
1 - 100 of 170 matches
Mail list logo