ovember 15, 2015 7:15 AM
>>>> *Subject:* Re: [AFMUG] link problems
>>>>
>>>> When we were doing 2.4GHz, we set all the routers in the houses to
>>>> channel 6, no options. Then we used 1 and 11 for outdoor.
>>>>
>>>>
>>&
e speed or latency.
Most of them we don't have any problems, but there are always a few.
- Original Message -
From: Rory Conaway
To: af@afmug.com
Sent: Sunday, November 15, 2015 7:15 AM
Subject: Re: [AFMUG] link problems
When we were doing 2.4GHz, we set all the routers in
t; in my way plus I am only 27 ft at customer house and my tower is 150ft.
>
>
>
> --
> -Original Message-
> From: "Josh Luthman" <j...@imaginenetworksllc.com>
> To: af@afmug.com
> Date: 11/15/15 10:20 AM
> Subject: Re: [AFMU
invisibility.
From: Glen Waldrop
Sent: Sunday, November 15, 2015 7:08 AM
To: af@afmug.com
Subject: Re: [AFMUG] link problems
I've done some playing with the routers recently. I've noticed that auto almost
always chooses the same channel that my customer's CPE is on.
It appears that the router
t; -Original Message-
> From: "Josh Luthman" <j...@imaginenetworksllc.com>
> To: af@afmug.com
> Date: 11/15/15 10:50 AM
> Subject: Re: [AFMUG] link problems
>
> We do that at lower heights right next door, doubt that's your problem.
>
> Josh Luthman
&g
.
- Original Message -
From: Josh Luthman
To: af@afmug.com
Sent: Sunday, November 15, 2015 10:12 AM
Subject: Re: [AFMUG] link problems
Doubt it. Run an airview first to gather noise readings and then evaluate
frequency.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100
ems, but there are always a few.
>>
>>
>>
>> - Original Message -
>> *From:* Rory Conaway <r...@triadwireless.net>
>> *To:* af@afmug.com
>> *Sent:* Sunday, November 15, 2015 7:15 AM
>> *Subject:* Re: [AFMUG] link problems
>>
>&g
>
>>>
>>> - Original Message -
>>> *From:* Rory Conaway <r...@triadwireless.net>
>>> *To:* af@afmug.com
>>> *Sent:* Sunday, November 15, 2015 7:15 AM
>>> *Subject:* Re: [AFMUG] link problems
>>>
>>> When we were doin
t; Most of them we don't have any problems, but there are always a few.
>
>
>
> - Original Message -
> *From:* Rory Conaway <r...@triadwireless.net>
> *To:* af@afmug.com
> *Sent:* Sunday, November 15, 2015 7:15 AM
> *Subject:* Re: [AFMUG] link problems
n" <j...@imaginenetworksllc.com>
To: af@afmug.com
Date: 11/15/15 10:50 AM
Subject: Re: [AFMUG] link problems
We do that at lower heights right next door, doubt that's your problem.
Josh Luthman
Office: 937-552-2340937-552-2340
Direct: 937-552-2343937-552-2343
1100 Wayne St
Suite 1337
Troy
he cpe or @ the sector?
>
> --
> -Original Message-
> From: "Josh Luthman" <j...@imaginenetworksllc.com>
> To: af@afmug.com
> Date: 11/15/15 11:12 AM
> Subject: Re: [AFMUG] link problems
>
> Doubt it. Run an airview first to gath
.
- Original Message -
From: Rory Conaway
To: af@afmug.com
Sent: Sunday, November 15, 2015 7:15 AM
Subject: Re: [AFMUG] link problems
When we were doing 2.4GHz, we set all the routers in the houses to channel 6,
no options. Then we used 1 and 11 for outdoor.
Rory
From: Af
josh
@ the cpe or @ the sector?
-Original Message-
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Date: 11/15/15 11:12 AM
Subject: Re: [AFMUG] link problems
Doubt it. Run an airview first to gather noise readings and then evaluate
frequency.
Jos
be awesome.
- Original Message -
From: Ken Hohhof
To: af@afmug.com
Sent: Saturday, November 14, 2015 4:08 PM
Subject: Re: [AFMUG] link problems
Customer routers used to mostly default to WiFi channel 6, but now they
typically are set by default to AUTO and in many cases to use
When we were doing 2.4GHz, we set all the routers in the houses to channel 6,
no options. Then we used 1 and 11 for outdoor.
Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Glen Waldrop
Sent: Sunday, November 15, 2015 6:08 AM
To: af@afmug.com
Subject: Re: [AFMUG] link problems
I've
noise
but no SSID. In your case, the 10 MHz channel would probably cause
the same invisibility.
*From:* Glen Waldrop <mailto:gwl...@cngwireless.net>
*Sent:* Sunday, November 15, 2015 7:08 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] link problems
I've done
/ 2412 MHz
Version v5.6.2 (XW)
airmax quality 83%
airmax capacity 60%
-Original Message-
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Date: 11/15/15 03:14 PM
Subject: Re: [AFMUG] link problems
One of the flaws in most (if not all?) of the Atheros chip sets
Prince" <part15...@gmail.com> <part15...@gmail.com>
> To: af@afmug.com
> Date: 11/14/15 04:41 PM
> Subject: Re: [AFMUG] link problems
>
> Get it off channel 7. Poke around at the sub end and see what else is on
> what channel. Typically, there will be les
Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Date: 11/14/15 04:41 PM
Subject: Re: [AFMUG] link problems
Get it off channel 7. Poke around at the sub end and see what else
is on what channel. Typically, there will be less noise at channel
1 or 11. Most
, November 14, 2015 4:01 PM
To: af@afmug.com
Subject: Re: [AFMUG] link problems
I can't decide that for you. You really need to know what the noise is like at
each sector. However, when I use 10 MHz channels, I try to take advantage of
the fact that you're only using a 1/2 channel. You're goig to get
Hello Guys
I just installed an powerbeam m2 today at customers house and I am getting:
signal strength -61 dBm
noise floor -89 dBm
transmit CCQ 86.4%
tx/rx rate is around 10-39mpbs/58.5-65mbps
Channel width 10MHz
Channel/Frequency 7/2442MHz
Version v5.6.2 (XW)
from the tower to CPE is around
stomer is wanting 8 meg but is only getting 3-4 meg there josh
>
> --
> -Original Message-
> From: "Josh Luthman" <j...@imaginenetworksllc.com>
> To: af@afmug.com
> Date: 11/14/15 04:25 PM
> Subject: Re: [AFMUG] link problems
Tim
-Original Message-
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Date: 11/14/15 04:28 PM
Subject: Re: [AFMUG] link problems
Looks like noise at the AP being my first thought. Assuming those
stats are f
What's the problem..?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 14, 2015 4:20 PM, "Tim Reichhart"
wrote:
> Hello Guys
> I just installed an powerbeam m2 today at customers house and I am getting:
>
>
Ignore noise floor number, it means nothing.
And you have made sure customer’s router is on a different channel, right?
From: Josh Luthman
Sent: Saturday, November 14, 2015 3:22 PM
To: af@afmug.com
Subject: Re: [AFMUG] link problems
What's the problem..?
Josh Luthman
Office: 937-552-2340
The customer is wanting 8 meg but is only getting 3-4 meg there josh
-Original Message-
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Date: 11/14/15 04:25 PM
Subject: Re: [AFMUG] link problems
What's the problem..?
Josh Luthman
Office: 937-552-
m
Date: 11/14/15 04:28 PM
Subject: Re: [AFMUG] link problems
Looks like noise at the AP being my first thought. Assuming those stats are
from the CPE.
Josh Luthman
Office: 937-552-2340937-552-2340
Direct: 937-552-2343937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373On Nov 14, 2015 4:27 PM
> --
> -Original Message-
> From: "Josh Luthman" <j...@imaginenetworksllc.com>
> <j...@imaginenetworksllc.com>
> To: af@afmug.com
> Date: 11/14/15 04:28 PM
> Subject: Re: [AFMUG] link problems
>
> Looks like noise a
Bill
my other sectors at the same tower is on 6,9 should I go with 1 and 11 with
10mhz?
Tim
-Original Message-
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Date: 11/14/15 04:41 PM
Subject: Re: [AFMUG] link problems
Get it off channel 7. Poke around at the
we’ve
done on our legacy 2.4 GHz sites.
*From:* Bill Prince <mailto:part15...@gmail.com>
*Sent:* Saturday, November 14, 2015 4:01 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] link problems
I can't decide that for you. You really need to know what the noise is
30 matches
Mail list logo