solid state to the gas tubes using a different
>> design that eliminates the steering diodes.
>> Seems like the steering diodes are causing the problem in some
>> situations.
>>
>> *From:* George Skorup
>> *Sent:* Wednesday, May 9, 2018 9:50 AM
>> *To:* af@afmug.
Nookular Surge Suppressor™
-- Original Message --
From: "Steve Jones"
To: af@afmug.com
Sent: 5/9/2018 1:34:18 PM
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
i vote MT radioactive tubes
On Wed, May 9, 2018 at 11:41 AM, wrote:
They are light se
at sites where the gas tubes were filled with
> radioactive gases.
>
> *From:* Adam Moffett
> *Sent:* Wednesday, May 9, 2018 10:23 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
>
> I thought it took hundreds of volts to t
: Wednesday, May 9, 2018 10:23 AM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
I thought it took hundreds of volts to trigger a gas tube.
Aren't some of them light sensitive? What if the APC chassis was near a window
and getting direct sun
ld be coming from
a ground loop or ???
Or a tube could be bad, or there could be a solder bridge but the test
and inspection procedure should have caught that.
From:Sam Lambie
Sent: Wednesday, May 9, 2018 9:56 AM
To:af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with M
could be bad, or there could be a solder bridge but the test and
inspection procedure should have caught that.
From: Sam Lambie
Sent: Wednesday, May 9, 2018 9:56 AM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
FYI,
I installed the gas tube
https://www.mccowntech.com/product/cat6-100-gas-discharge-tube-rack-mount-surge-protector/
From: Steve Jones
Sent: Wednesday, May 9, 2018 9:32 AM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
What's this gas tube product placement?
I want t
*To:* af@afmug.com
> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
>
> No diodes, just gas-tube for large surge event suppression. Obviously not
> as much protection though. I'm seeing more CRC errors than I'm comfortable
> with on the car
Skorup
Sent: Wednesday, May 9, 2018 9:50 AM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
No diodes, just gas-tube for large surge event suppression. Obviously not as
much protection though. I'm seeing more CRC errors than I'm comfortable wi
eem to be flawless with everything that people have
tried them on.
-Original Message-
From: Matt
Sent: Wednesday, May 9, 2018 8:08 AM
To: af@afmug.com <mailto:af@afmug.com>
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with
Medusa
Chuck,
9 AM, wrote:
> > Matt,
> >
> > I sent you a note off-list. I would like to send you the gas tube
> version
> > to see if that fixes the issue.
> >
> > Inquiring minds want to know...
> >
> > -----Original Message- From: Matt
> > Sent:
with everything that people have tried them on.
-Original Message-
From: Matt
Sent: Wednesday, May 9, 2018 8:08 AM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
Chuck,
Like form factor of new arrestors much better. Thicker PCB and RJ45
not as
c pulse disabled or no gps receiver connected?
>>>>>>>
>>>>>>> How long of a wire?
>>>>>>>
>>>>>>> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie
>>>>>>> wrote:
>>>>>>>
>>>
ch 28, 2018 4:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
OK, so grounds are related to the problem.
There may be something unusual with timing pulses on the power that is
causing the surge suppressor to fire.
Forrest would know much more than I
es the issue.
>
> Inquiring minds want to know...
>
> -Original Message- From: Matt
> Sent: Wednesday, March 28, 2018 4:08 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
>
>> OK, so grounds are related to the problem.
Send me shipping address.
From: Sam Lambie
Sent: Friday, April 6, 2018 8:56 AM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
Chuck,
I'll be your guinea pig.
On Thu, Apr 5, 2018 at 4:58 PM, Matt wrote:
Been busy working out of offic
gt; > Sent: Wednesday, March 28, 2018 4:08 PM
> > To: af@afmug.com
> > Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
> >
> >> OK, so grounds are related to the problem.
> >>
> >> There may be something unusual with timi
be version
> to see if that fixes the issue.
>
> Inquiring minds want to know...
>
> -Original Message- From: Matt
> Sent: Wednesday, March 28, 2018 4:08 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
>
>> OK, so
ent you a note off-list. I would like to send you the gas tube version
> to see if that fixes the issue.
>
> Inquiring minds want to know...
>
> -Original Message- From: Matt
> Sent: Wednesday, March 28, 2018 4:08 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] mccowntech
Matt,
I sent you a note off-list. I would like to send you the gas tube version
to see if that fixes the issue.
Inquiring minds want to know...
-Original Message-
From: Matt
Sent: Wednesday, March 28, 2018 4:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge
and 5 Upper1
>>> Or is there documentation on how to set these puppies?
>>> Thanks
>>> Sam
>>>
>>> On Mon, Apr 2, 2018 at 10:08 AM, wrote:
>>>
>>>> Matt, sending you a note off list.
>>>>
>>>>
n3 Bottom 2, Pins 4 and 5 Upper1
>> Or is there documentation on how to set these puppies?
>> Thanks
>> Sam
>>
>> On Mon, Apr 2, 2018 at 10:08 AM, wrote:
>>
>>> Matt, sending you a note off list.
>>>
>>> -----Original Message- From
om 2, Pins 4 and 5 Upper1
>>> Or is there documentation on how to set these puppies?
>>> Thanks
>>> Sam
>>>
>>> On Mon, Apr 2, 2018 at 10:08 AM, wrote:
>>>
>>>> Matt, sending you a note off list.
>>>>
>>>
gt;> Upper 2, Pin3 Bottom 2, Pins 4 and 5 Upper1
>> Or is there documentation on how to set these puppies?
>> Thanks
>> Sam
>>
>> On Mon, Apr 2, 2018 at 10:08 AM, wrote:
>>
>>> Matt, sending you a note off list.
>>>
>>> -
ge- From: Matt
Sent: Wednesday, March 28, 2018 4:08 PM
To: af@afmug.com <mailto:af@afmug.com>
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor
with Medusa
OK, so grounds are related to the problem.
There may be something
, wrote:
> Matt, sending you a note off list.
>
> -Original Message- From: Matt
> Sent: Wednesday, March 28, 2018 4:08 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
>
> OK, so grounds are related to the problem.
>
Matt, sending you a note off list.
-Original Message-
From: Matt
Sent: Wednesday, March 28, 2018 4:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
OK, so grounds are related to the problem.
There may be something unusual with timing
They will keep equipment safe.
-Original Message-
From: Matt
Sent: Wednesday, March 28, 2018 4:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
OK, so grounds are related to the problem.
There may be something unusual with timing pulses
> OK, so grounds are related to the problem.
>
> There may be something unusual with timing pulses on the power that is
> causing the surge suppressor to fire.
> Forrest would know much more than I about that.
>
> I honestly don’t know if anyone has tried my product with a Medusa before.
> I have a
;>>>
>>>>>>>> Is the sync pulse disabled or no gps receiver connected?
>>>>>>>>
>>>>>>>> How long of a wire?
>>>>>>>>
>>>>>>>> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie
>>
onnected?
>>>>>>>
>>>>>>> How long of a wire?
>>>>>>>
>>>>>>> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Timing is bei
>> *From:* Sam Lambie
>>>>>>>> *Sent:* Monday, March 26, 2018 9:18 AM
>>>>>>>> *To:* af@afmug.com
>>>>>>>> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with
>>>>>>>> Medusa
>>>>>
7;ll give the Gas tube version a shot if you got it.
>>>>>>
>>>>>> On Mon, Mar 26, 2018 at 9:37 AM, wrote:
>>>>>>
>>>>>>> OK, so grounds are related to the problem.
>>>>>>>
>>>>>>> Th
gt;>>>
>>>>>> On Sun, Mar 25, 2018 at 3:15 PM, wrote:
>>>>>>
>>>>>>> When this gets sent
>>>>>>> Sorry you are having difficulty.
>>>>>>>
>>>>>>> I would pull it from t
, March 26, 2018 9:18 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] mccowntech rack mount surge
suppressor with Medusa
I did pull it from the rack and let it float, no
change, however, I didn't reboot it whi
;>>>> Forrest would know much more than I about that.
>>>>>
>>>>> I honestly don’t know if anyone has tried my product with a Medusa
>>>>> before.
>>>>> I have a 100% gas tube version that may solve the problem.
>>>>>
ied my product with a Medusa
>>>> before.
>>>> I have a 100% gas tube version that may solve the problem.
>>>>
>>>>
>>>> *From:* Sam Lambie
>>>> *Sent:* Monday, March 26, 2018 9:18 AM
>>>> *To:* af@afmug.com
>
t;>> before.
>>> I have a 100% gas tube version that may solve the problem.
>>>
>>>
>>> *From:* Sam Lambie
>>> *Sent:* Monday, March 26, 2018 9:18 AM
>>> *To:* af@afmug.com
>>> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppre
nestly don’t know if anyone has tried my product with a Medusa before.
>> I have a 100% gas tube version that may solve the problem.
>>
>>
>> *From:* Sam Lambie
>> *Sent:* Monday, March 26, 2018 9:18 AM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] mccownte
Monday, March 26, 2018 9:18 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
>
> I did pull it from the rack and let it float, no change, however, I didn't
> reboot it while the card was floating.
>
> On Sun, Mar 25, 201
% gas tube version that may solve the problem.
From: Sam Lambie
Sent: Monday, March 26, 2018 9:18 AM
To: af@afmug.com
Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa
I did pull it from the rack and let it float, no change, however, I didn't
reboot it while the car
> Perhaps the server got launched by Elon Musk and the time delay is just
> accumulating.
>
> *From:* Sam Lambie
> *Sent:* Sunday, March 25, 2018 6:10 AM
> *To:* af@afmug.com
> *Subject:* [AFMUG] mccowntech rack mount surge suppressor with Medusa
>
> Yo smart folks,
>
Traco TSP 600-148
1 radio. Planning on 4 Radios Soon.
On Mon, Mar 26, 2018 at 8:13 AM, Forrest Christian (List Account) <
li...@packetflux.com> wrote:
> What power supplies are you using with the medusa? How many radios?
>
> On Sun, Mar 25, 2018, 6:10 AM Sam Lambie wrote:
>
>> Yo smart folks,
What power supplies are you using with the medusa? How many radios?
On Sun, Mar 25, 2018, 6:10 AM Sam Lambie wrote:
> Yo smart folks,
>
> I put a gige APC HV rack mount surge suppressor inline with a Cambium
> Medusa today. It booted up, got in about 20 pings and then the Packetflux
> SyncInjec
understand.
Forrest is probably better versed in thinking about this than I am.
Perhaps the server got launched by Elon Musk and the time delay is just
accumulating.
From: Sam Lambie
Sent: Sunday, March 25, 2018 6:10 AM
To: af@afmug.com
Subject: [AFMUG] mccowntech rack mount surge suppressor
Yo smart folks,
I put a gige APC HV rack mount surge suppressor inline with a Cambium
Medusa today. It booted up, got in about 20 pings and then the Packetflux
SyncInjector shutdown. Tried putting the Ethernet cable directly in the
SyncInjector and it worked, just like on the bench when I tested S
46 matches
Mail list logo