Here is a good ‘un:
http://www.mccowntech.com/24-inch-pipe-standoff/
From: Jason McKemie
Sent: Thursday, March 10, 2016 12:00 PM
To: af@afmug.com
Subject: [AFMUG] 5GHz Omni standoff
Anyone have suggestions for a standoff mount for use with a 5GHz omni? It will
be mounted to the side of a Piro
I have used a lot of the Andrew S2000.
On 3/10/2016 1:00 PM, Jason McKemie wrote:
Anyone have suggestions for a standoff mount for use with a 5GHz
omni? It will be mounted to the side of a Pirod tower, so I'm going
to need some sort of standoff to minimize shadowing.
-Jason
I had looked at those, I just didn't know if it had enough standoff for use
with an omni - from a shadowing perspective.
On Thursday, March 10, 2016, Chuck McCown wrote:
> Here is a good ‘un:
> http://www.mccowntech.com/24-inch-pipe-standoff/
>
> *From:* Jason McKemie
>
> *Sent:* Thursday, Marc
: Jason McKemie
Sent: Thursday, March 10, 2016 2:02 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
I had looked at those, I just didn't know if it had enough standoff for use
with an omni - from a shadowing perspective.
On Thursday, March 10, 2016, Chuck McCown wrote:
Here is a
andoff. Or
> Connect-It Wireless S2-S6. Can be used on vertical or sloping tower legs.
> Sitepro1 also has several solutions, some of which are YUGE!
>
>
> *From:* Jason McKemie
> *Sent:* Thursday, March 10, 2016 2:02 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] 5GHz Omni st
This one will do 24 inches:
http://www.mccowntech.com/side-arm-tower-mount/
From: Jason McKemie
Sent: Thursday, March 10, 2016 1:29 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
I'm not exactly sure how much standoff I need, I guess that is part of the
question.
On Thu, M
ndoff. Or
Connect-It Wireless S2-S6. Can be used on vertical or sloping tower legs.
Sitepro1 also has several solutions, some of which are YUGE!
From: Jason McKemie
Sent: Thursday, March 10, 2016 2:02 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
I had looked at tho
.
From: Ken Hohhof
Sent: Thursday, March 10, 2016 1:35 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
I thought Chuck posted something awhile back about X many wavelengths, I
suspect 2 ft should be fine at 5 GHz, but no matter what I assume you’ll lose
some signal going through
om
> *Subject:* Re: [AFMUG] 5GHz Omni standoff
>
> I'm not exactly sure how much standoff I need, I guess that is part of the
> question.
>
> On Thu, Mar 10, 2016 at 2:25 PM, Ken Hohhof wrote:
>
>> How much standoff do you need? I have used Andrew S200 like George says
&
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
Do you know of any distributors who stock these?
On Thu, Mar 10, 2016 at 2:33 PM, Chuck McCown wrote:
This one will do 24 inches:
http://www.mccowntech.com/side-arm-tower-mount/
From: Jason McKemie
Sent: Thursday, March 10, 2016
m:* Jason McKemie
> *Sent:* Thursday, March 10, 2016 1:46 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] 5GHz Omni standoff
>
> Do you know of any distributors who stock these?
>
> On Thu, Mar 10, 2016 at 2:33 PM, Chuck McCown wrote:
>
>> This one will do 24 inc
lt;mailto:j.mcke...@veloxinetbroadband.com>
*Sent:* Thursday, March 10, 2016 2:02 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] 5GHz Omni standoff
I had looked at those, I just didn't know if it had enough
standoff for use with an omni - from a
What do you pay for an Andrew/Comscope S200?
From: Ken Hohhof
Sent: Thursday, March 10, 2016 1:25 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
How much standoff do you need? I have used Andrew S200 like George says (2 ft
standoff) or S300 (3 ft), actually they go up to 6 ft
i thought i was paying somewhere in the $150 range for it
On Thu, Mar 10, 2016 at 7:16 PM, Chuck McCown wrote:
> What do you pay for an Andrew/Comscope S200?
>
> *From:* Ken Hohhof
> *Sent:* Thursday, March 10, 2016 1:25 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG]
S200?
>>
>> *From:* Ken Hohhof
>> *Sent:* Thursday, March 10, 2016 1:25 PM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] 5GHz Omni standoff
>>
>> How much standoff do you need? I have used Andrew S200 like George says
>> (2 ft standoff) or S3
$78 (plus shipping) here:
http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff/
From: Kurt Fankhauser
Sent: Thursday, March 10, 2016 6:31 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
i thought i was paying somewhere in the $150 range for it
On Thu, Mar 10, 2016 at 7
Hmm, Tessco has Andrew at $138, house brand at $118, not sure why so expensive.
Of course the shipping adds a lot unless you buy a bunch at once shipped
freight on a pallet.
From: Lewis Bergman
Sent: Thursday, March 10, 2016 6:48 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
m, Tessco has Andrew at $138, house brand at $118, not sure why so
> expensive. Of course the shipping adds a lot unless you buy a bunch at
> once shipped freight on a pallet.
>
> *From:* Lewis Bergman
> *Sent:* Thursday, March 10, 2016 6:48 PM
> *To:* af@afmug.com
> *Subjec
On 3/10/16 16:59, Lewis Bergman wrote:
You have to watch Tessco. They are in Maryland so if you aren't on the
east coast shipping gets high. There said they are opening a San Antonio
warehouse but o don't know if they are open. Talley and Hutton have more
locations.
Tessco has two distribution
I used to buy tons of stuff from Hutton...and Electrocomm as well...
On Mar 10, 2016 6:07 PM, "Seth Mattinen" wrote:
> On 3/10/16 16:59, Lewis Bergman wrote:
>
>> You have to watch Tessco. They are in Maryland so if you aren't on the
>> east coast shipping gets high. There said they are opening
Hmmm, that is very low. Like lower than wholesale low. I wonder how they do
it for that...
From: Ken Hohhof
Sent: Thursday, March 10, 2016 5:48 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
$78 (plus shipping) here:
http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff
ug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] 5GHz Omni standoff
$78 (plus shipping) here:
http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff/
*From:* Kurt Fankhauser <mailto:lists.wavel...@gmail.com>
*Sent:* Thursday, March 10, 2016 6:31 PM
*To:* af@afmug.com &l
gt; *To:* af@afmug.com
> *Subject:* Re: [AFMUG] 5GHz Omni standoff
>
> $78 (plus shipping) here:
> http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff/
>
>
> *From:* Kurt Fankhauser
> *Sent:* Thursday, March 10, 2016 6:31 PM
> *To:* af@afmug.com
> *Subject:
OK, that makes a huge difference. On a mount like that my galvanizing would
cost me close to $10 alone.
From: Bill Prince
Sent: Thursday, March 10, 2016 7:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
Chinese steel. Otherwise known as zinc-plated lead.
bp
On 3/10/2016
Funny they use a drawing that they must have gotten from Andrews because it has
the same error...
From: Ken Hohhof
Sent: Thursday, March 10, 2016 5:48 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
$78 (plus shipping) here:
http://ciwireless1-px.rtrk.com/product/tower-antenna
Subject: Re: [AFMUG] 5GHz Omni standoff
Hmmm, that is very low. Like lower than wholesale low. I wonder how they do
it for that...
From: Ken Hohhof
Sent: Thursday, March 10, 2016 5:48 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
$78 (plus shipping) here:
http://ciwireless1
: Bill Prince
Sent: Thursday, March 10, 2016 8:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
Chinese steel. Otherwise known as zinc-plated lead.
bp
On 3/10/2016 6:25 PM, Chuck McCown wrote:
Hmmm, that is very low. Like lower than wholesale low. I wonder how they do
it
Most tower steel is a clone of either Rohn or Andrew.
From: Chuck McCown
Sent: Thursday, March 10, 2016 8:46 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
Funny they use a drawing that they must have gotten from Andrews because it has
the same error...
From: Ken Hohhof
Sent
arch 10, 2016 8:27 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] 5GHz Omni standoff
Chinese steel. Otherwise known as zinc-plated lead.
bp
On 3/10/2016 6:25 PM, Chuck McCown wrote:
Hmmm, that is very low. Like lower than wholesale low. I wonder how
they do it for
t virtually all brand name tools are made in China, not
just Harbor Freight. They can make junk and they can make good stuff.
*From:* Bill Prince <mailto:part15...@gmail.com>
*Sent:* Thursday, March 10, 2016 8:27 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] 5GHz
do not hide, it
> is stamped right into them. I am sad to report however that the quality
> seems quite good.
>
> Remember that virtually all brand name tools are made in China, not just
> Harbor Freight. They can make junk and they can make good stuff.
>
>
> *From:* Bill P
ems
quite good.
Remember that virtually all brand name tools are made in China, not just
Harbor Freight. They can make junk and they can make good stuff.
From: Bill Prince
Sent: Thursday, March 10, 2016 8:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
Oh, I can do it for that price, but I have a distribution channel and they have
to be able to have a margin too.
From: Adam Moffett
Sent: Friday, March 11, 2016 9:54 AM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
That price is a little crazy though. You could just maybe buy that
33 matches
Mail list logo