Has anyone had any luck with FM801-based cards? The research I've done
shows many people have problems with this chip. My card works fine when
I use the forte kernel module, but I can't get any sound with ALSA.
I've tried 0.9.8 and 1.0.0pre3 with no luck. Even though the kernel
driver works
hiho
i have a cm8738 card but dont get the 6channel support running. 4channel
support is already running. So i have sound on the rear and front. But why
dont i can get sound from the center/bass? Anyone a good idea?
(Yes i`ve tried the driver from c-media but this wont work too, and yes
i`ve
Hello,
I am interested in the method how to put different signals into front
and rear speakers. My intention is something like /dev/dsp0 for front
and /dev/dsp1 for rear speakers as in OSS.
Then I can play different music in first headphones (for me) and in the
second ones (for my
Hi List!
I read a message on the reagarding low volume and loudness. I looked
at my ac97 proc file and saw loudness is off. I have to pump up PCM
volume to have enough output, but this take my card to distortion.
Does loudness resolve the problem?? How can I turn it on? Regards,
modprobe snd-emu10k1 fails
Looking in /proc/asound, its says no soundcards. Under that, all the audio
and midi devices say NOT ENABLED IN CONFIG. For a sound driver, it says
3.8.1a-980706 (ALSA v0.9.7 emulation code), which I don't understand. (I
installed 0.9.8 not 0.9.7)
What config is this
I still don't understand why, but now it compiles.
Previously, I used the 'O'
option on the make and sent it to a different directory. Apparently, this is
broken in the kernel source. I recompiled the kernel in its source directory.
Now ALSA compiles. (Still doesn't work, but compiles.)
Yes i have it, i compiled with --prefix=/usr even with this, mplayer dont find alsa!
On Mon, 8 Dec 2003 14:55:47 +0100
p z [EMAIL PROTECTED] wrote:
Hi,
Did you have alsa-lib instaled ???
Peter Zubaj
http://www.logofun.pobox.sk - urobte
Samuel Kaufman wrote:
Is there any MIDI support for the Turtle Beach Santa Cruz sound card?
Not external devices, but the on-board goodies.
No.
Regards,
Clemens
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does
[EMAIL PROTECTED] wrote:
Rightly or wrongly I prefer to run with all my required modules
compiled statically into the kernel.
[...]
How do I specify the necessary parameters (i/o, dma, irq,etc.) as
a kernel boot-time parameter?
This isn't documented very well. There is a comment at the end
Peter Radics wrote:
I tried aplay -D surround40 test.wav and got the following error:
Playing WAVE 'test.wav' : Unsigned 8 bit, Rate 22050 Hz, Mono
aplay: set_params:833: Channels count non available
You tried to play a one-channel file on a four-channel device.
Try -D
Nicolas Croiset (VDL) wrote:
We always have no sound... Even if I change the volume with xmixer.
Please try alsamixer, and make sure to unmute ('M') and raise the
volume of all channels.
HTH
Clemens
---
This SF.net email is sponsored by:
Richard Kimber wrote:
While trying to install Alsa on my Debian testing system, I get:-
Starting ALSA (version 0.9.6): emu10k1-failed emu10k1-failed failed
invoke-rc.d: initscript alsa, action restart failed.
dpkg: error processing alsa-modules-2.4.22.1203 (--install):
subprocess
Vaclav Peroutka wrote:
I am interested in the method how to put different signals into front
and rear speakers. My intention is something like /dev/dsp0 for front
and /dev/dsp1 for rear speakers as in OSS.
It's possible if your program support ALSA.
Put the following in your ~/.asoundrc:
phony wrote:
modprobe snd-emu10k1 fails
Are there any error messages? Maybe in /var/log/messages?
Looking in /proc/asound, its says no soundcards. Under that, all the audio
and midi devices say NOT ENABLED IN CONFIG. For a sound driver, it says
3.8.1a-980706 (ALSA v0.9.7 emulation code),
At 18:36 08/12/03 +0100, Clemens Ladisch wrote:
Nicolas Croiset (VDL) wrote:
We always have no sound... Even if I change the volume with xmixer.
Please try alsamixer, and make sure to unmute ('M') and raise the
volume of all channels.
Hello,
I used it in oss mode exclusively so alsamixer is not
I've the same problem, i tried resolv it during days but now I dont have
time anymore.
If you find a solution I'm very interested!
Thanks
cOOlErIc
Le Mon, 8 Dec 2003 11:09:05 GMT
[EMAIL PROTECTED] a ecrit:
hiho
i have a cm8738 card but dont get the 6channel support running.
4channel
I tried
modprobe -l
None of the sound modules show up. But I can go to
/lib/modules/kernel/sound
and see them (in acore, pci, synth, etc)
Doing
modprobe snd-mixer-oss
returns
Module snd-mixer-oss not found.
But it's there. The aliases are in /etc/modutils/alsa
To add to my confusion, I noticed the following comment in forte.c (the
driver that works for me):
Based upon the ALSA FM801 driver by Jaroslav Kysela and OSS drivers by
Thomas Sailer, Alan Cox, Zach Brown, and Jeff Garzik.
So the driver that I have no problems with is based on the driver that
On Mon, 8 Dec 2003, Brian M Dube wrote:
To add to my confusion, I noticed the following comment in forte.c (the
driver that works for me):
Based upon the ALSA FM801 driver by Jaroslav Kysela and OSS drivers by
Thomas Sailer, Alan Cox, Zach Brown, and Jeff Garzik.
So the driver that I
Hi!
I am currently trying to configure my Terratec EWX 24/96 sound card
but I am having some troubles having a 100% working config and I need
help.
I just run alsaconf in order to get everything up.
1) I can't use the alsa-out plugin of xmms (only OSS works).
2) I can't hear multiple sounds at
Hello,
On Mon, 8 Dec 2003 08:41:02 +0100, p z [EMAIL PROTECTED] said:
Could you try remove this line from file alsa-driver/alsa-
kernel/pci/emu10k1/emu10k1_main.c Recompile, install.
outl(reg | HCFG_GPOUT0, emu-port + HCFG);
Great, that solved the problem! It seems like there is
I am trying to load the snd-emu10k1 module but am constantly getting a
failed no such device or device busy message. I had them working on my
Testing system, but now am at Unstable. I can load the EMU10K1.o module
succesfully and I can hear sound, but that is the OSS one and I want to use
What sound cards are used by the people on this list -
especially the developers G. I currently have a Turtle
Beach Santa Cruz and want to upgrade. I have been looking
at cards like the Midiman Delta 44 or others in it's class
but I'm concerned about support for it and others like it
in
On Mon, 2003-12-08 at 15:44, brett holcomb wrote:
What sound cards are used by the people on this list -
especially the developers G. I currently have a Turtle
Beach Santa Cruz and want to upgrade. I have been looking
at cards like the Midiman Delta 44 or others in it's class
but I'm
Thanks. I assume it's well supported in Alsa?
On Mon, 08 Dec 2003 15:53:32 -0500
Austin Acton [EMAIL PROTECTED] wrote:
On Mon, 2003-12-08 at 15:44, brett holcomb wrote:
What sound cards are used by the people on this list -
especially the developers G. I currently have a
Turtle
Beach Santa
Has anyone had any experience with this card under Alsa?
Is it supported and does anyone know what chipset it is?
Thanks.
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does
Hi,
While browsing through the user comments for the Soundblaster Live Value card (device id - 1102:0006), I came across this comment by Hviid, dated 28 april 2003, wherein he says that the SB Live shipped with the Dell dimension series 8200 is not supported. What is the status of that card now ?
On Mon, Dec 08, 2003 at 03:44:53PM -0500, brett holcomb wrote:
What sound cards are used by the people on this list -
especially the developers G. I currently have a Turtle
Beach Santa Cruz and want to upgrade. I have been looking
at cards like the Midiman Delta 44 or others in it's
I'm just getting finished with something similar. I'm sure there's a better
way, but this was how I got it to work:
I followed the instructions from
http://alsa.opensrc.org/index.php?page=CompilingTips
It didn't work, so I tried again.
After the reboot, I did a modprobe and noticed that the
Hello. I'd like to get a better soundcard than the Ensoniq PCIAudio
I currently have. I mean to use the ALSA drivers.
I was tempted by the Turtle Beach Santa Cruz but was put off by the
warning from Frank van de Pol on the ALSA Soundcard Matrix about
limited ALSA support because of limited
brett holcomb wrote:
What sound cards are used by the people on this list - especially the
developers G. I currently have a Turtle Beach Santa Cruz and want
to upgrade. I have been looking at cards like the Midiman Delta 44 or
others in it's class but I'm concerned about support for it and
I compiled my modules using a Debian packager thingy. I downloaded the
latest ALSA source (0.9.8) using apt, along with alsa-base and alsa-utils.
Then I used make-kpgk to make a deb file for the alsa modules. The error
comes when I try to install the deb file.
For some reason snd.o will load
The only message I get in /var/log/messages is:
kernel: PCI: Found IRQ 5 for device 00:0b.0
The modules load fine and I get no errors anywhere in the logs or on
any command lines. I've tried unmuting different combinations of
channels, but I get no sound. Master, PCM, and Wave should be enough
Some queries about the latest 2.6 kernels...
I presume the alsa part that comes with a 2.6 kernel is only
the equiv of the alsa-driver package so do I still need to get
alsa-lib and alsa-utils from somewhere else ?
If so, then do I have to determine which particular version is
in the kernel and
34 matches
Mail list logo
