Hello,
I am running debian on kernel 2.4.18 and amanda 2.4.2p2 for both
server and client. Upto yesterday it worked fine but when today I run
amdump it stuck on getting estimate on clients and when I check the
process on clients killpgrp become zombie and it is run by backup.
So can anybody
* Robert Kearey <[EMAIL PROTECTED]> (Thu, Mar 14, 2002 at 05:03:09PM +1000)
> I'm sure this is an obvious FAQ, but anyway ...
> The time has come when I need greater granularity for our backups, so I
> want to switch from dump to gnutar. I gather this isn't a simple
> proccess - is there a Can
Is it possible to relabel a tape, but preserve the existing data on the
tape ?
Reason Im asking is that we are now using 2 tapedrives, and Id like to
relabel half od the tapes so that they can only be sued in the 2nd drive,
but I'd rather not loose any data on the second batch.
Of course, if all
Hello amanda-gurus,
I backup big files from a client over ethernet (100 MBit) to amanda server.
the client is very weak (~ 200 MhZ) and it is no good idea to compress the
files because the client
could crash I think.
The files get stored on a holding disk on the amanda server.
I use DDS3-tapes
Hello all,
I'm using amanda-2.4.2p2 and recently had to add a few
tapes with the "amlabel" program.
To my surprise that operation obliterated "tapelist"
file, instead of appending the new tapes (as described
on the man page), and now Amanda is asking for new
tapes. It seems to have no memory of
Hi,
Thank you very much for your suggestion.
Meanwhile, I got another problem...when I enter the command "amtape
daily show" I got the following message: scanning all 7 slots in
tape-changer rack: slot1: date X Label DailySet11 amtape: could not
load slot DeviceCapabilitiesPage: == Null.
I am
I was getting a selfcheck error on one of my sun boxes I just built amanda
on and this is what I found in /var/adm/messages:
jupiter inetd[179]: amanda/udp server failing (looping), service terminated
Any ideas on what I need to fix here?
Also on my MP-RAS box I'm getting this error running sel
I have a client with 4 fast processors and would like to use at least 2 or 3
of them if possible for dumps. Is it possible to get amanda to dump more
than 1 partition on the same client at a time to the backup server? I want
to do compress client best which will really slow things down so to
co
I've asked this question before but I have a litle more information now. My backups
kick off at 10pm but they are not finishing till 8pm and by that time there is no
one in the office to change the tape for the next backups starting two hours later.
This only seems to have taken this long since
Hi Robert,
I by no means an Amanda expert, however I am pretty sure you can mix
dump and gnutar in your backups. I think it is simply a matter of
adjusting the entries in your disklist. I have been able to use both
dump and gnutar without problems. You may need to make sure that your
clients h
We have a strange problem with throughput to the backup server. The
backup-server is foo1 and the fileserver is foo3. Both servers have a 100Mb
NIC and connected to the same switch.
I can copy a 25Mb file from the /usr/share/admin/felles/infoavd share in 3
seconds to my computer, so the throughpu
On Thu, 14 Mar 2002 at 10:55am, "Nünighoff, Leonie, NUE" wrote
> is there any possibility to compress the files AFTER they got transmitted to
> the server?
>
In your dumptype:
compress server fast (or best).
--
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University
On Wed, Mar 13, 2002 at 07:59:02PM -0500, John R. Jackson wrote:
> >Every day now (for the past 3 days) I have been getting the same errors:
> >
> > "Bad file descriptor"
>
> Sigh. Amanda is not telling you the whole story there (can't remember
> if this is fixed in the current source or no
Okay, this makes no sense whatsoever. This is only occuring on one
filesystem, and it is sporadic in occurances there. When ever I
attempt to do a amrecover of the directory on /var/mail I get the
following:
But I can dd the file from tape and extract it doing a straight
ufsrestore from th
> -Original Message-
> From: Maurizio Bossi [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, March 14, 2002 10:43 AM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: DAT40 problem
>
>
> Hi ..
> I have the same problem of compression with HP c5687 DAT40
> and Linux, could
> you send m
On Thu, Mar 14, 2002 at 10:36:44AM +, jpsp wrote:
>
> Hello all,
>
> I'm using amanda-2.4.2p2 and recently had to add a few
> tapes with the "amlabel" program.
>
> To my surprise that operation obliterated "tapelist"
> file, instead of appending the new tapes (as described
> on the man page
Hi David,
I don't think I have all the answers to all of your questions, but I did
see a few things that you may want to check into further.
First, I would take a closer look at the chunksize entry in the
Amanda.conf. I think this refers to the size of the files used to hold
your backups. I us
I have my exclude lists on the client systems but I am not sure that they are
being used. The total space that gets backed up is about 80MB or so.
According to amstatus it is trying to dump 633MB which is roughly half the
amount of space on the file system. I'm pretty sure that my exclude li
Cópia Jean-Louis Martineau <[EMAIL PROTECTED]>:
> On Thu, Mar 14, 2002 at 10:36:44AM +, jpsp
> wrote:
> >
> > Hello all,
> >
> > I'm using amanda-2.4.2p2 and recently had to
> add a few
> > tapes with the "amlabel" program.
> >
> > To my surprise that operation obliterated
> "tapelist"
> > fi
I'll send you a copy once it's complete. I wouldn't want to send it the
whole list. Apparently, only a handful are interested in it.
On Wed, 2002-03-13 at 21:09, Robert SHEN wrote:
> Will it be possible to post it here?
>
> - Original Message -
> From: "Brad Tilley" <[EMAIL PROTECTED]>
On Thu, 14 Mar 2002, Chris Freeman wrote:
> Hi all,
> I have been using amanda on other servers, and so far have been very
> impressed with its capabilites. However on one particular box I get a
> strange problem. amdump and amcheck run with no complaints or problems,
> but when I go to run amrec
On 14 Mar 2002, Brad Tilley wrote:
> I'll send you a copy once it's complete. I wouldn't want to send it the
> whole list. Apparently, only a handful are interested in it.
>
> On Wed, 2002-03-13 at 21:09, Robert SHEN wrote:
> > Will it be possible to post it here?
> >
> > - Original Message
On Thu, 14 Mar 2002, Jeffrey Auerbach wrote:
> I have my exclude lists on the client systems but I am not sure that they are
> being used. The total space that gets backed up is about 80MB or so.
> According to amstatus it is trying to dump 633MB which is roughly half the
> amount of space o
It was a spelling error in my amanda.conf file of the exclude list.
I will now accept a slap.
jeff
On Thursday 14 March 2002 01:31 pm, Doug Silver wrote:
> On Thu, 14 Mar 2002, Jeffrey Auerbach wrote:
> > I have my exclude lists on the client systems but I am not sure that they
> > are being us
On Thu, 14 Mar 2002, Doug Silver wrote:
> On 14 Mar 2002, Brad Tilley wrote:
>
> > I'll send you a copy once it's complete. I wouldn't want to send it the
> > whole list. Apparently, only a handful are interested in it.
>
> I disagree -- one of the things that I (and others I've talked to) have
Brian,
What does your amanda /etc/inetd.conf entries look like?
should look like...
amanda dgram udp waitamanda /usr/local/libexec/amandad
amandad
./Ben
> I was getting a selfcheck error on one of my sun boxes I just built amanda
> on and this is what I found in /var/adm/m
On Thu, 14 Mar 2002, Eric Trager wrote:
> On Thu, 14 Mar 2002, Doug Silver wrote:
>
> > On 14 Mar 2002, Brad Tilley wrote:
> >
> > > I'll send you a copy once it's complete. I wouldn't want to send it the
> > > whole list. Apparently, only a handful are interested in it.
> >
> > I disagree -- one
I have written two docuements. One on excluding data with amanda, and one
on how to setup amanda to use gpg. The exclude doc is now available in
the DOCS subdir, but it was about six months between when I finished it
and a new version of amanda was released. Is there another location that
docs
I'm getting an error when running amrecover which is coming from my
configuration I suppose. It's trying to use "0" as the device, when it
should look in the chg-scsi.conf for configuration 0 and see the device
name, right? And if I change my tapedev to "/dev/nst0" it screws
everything else
Hi,
On Thu, Mar 14, 2002 at 09:00:06AM -0500, Zhen Liu wrote:
> Hi,
>
> Thank you very much for your suggestion.
>
> Meanwhile, I got another problem...when I enter the command "amtape
> daily show" I got the following message: scanning all 7 slots in
> tape-changer rack: slot1: date X Label Da
On Wednesday, March 13, 2002, at 01:34 PM, Joshua Baker-LePain wrote:
> On Wed, 13 Mar 2002 at 1:21pm, Eric Zylstra wrote
>
>> I've been looking, but don't know where to find info about tapeless
>> use. The FAQ has an entry on this, but no answer. Any pointers?
>>
> Do you mean degraded mode (
Here is the rough draft of my amanda documentation.
It deals mostly with using amanda in a predominantly Windows based
environment.
This doc is far from complete. It lacks a lot, but here it is anyway
with all of its imperfections.
Amanda Backup Documentation
By Brad Tilley [EMAIL PRO
On Thu, 14 Mar 2002 at 12:38pm, Eric Zylstra wrote
> I have terrabytes of storage available via NFS. I want to backup to
> that NFS mount. No tape will ever be involved.
>
> I'm using 2.4.p2. I've seen discussion before about doing such a thing
> with older versions.
Using files on disk li
Hi,
Thanks for your prompt response...below are the debug of output
(/tmp/amanda)...pls check them...I really appreciate your help!!!
[root@apple amanda]# more amtape.20020314082946.debug
amtape: debug 1 pid 20641 ruid 33 euid 33 start time Thu Mar 14
08:29:46 2002
changer: got exit: 0 str: 1 7
Hi,
I have problem with Amanda recently. The tape rate was a little bit slow
from the very beginning but it wouldn't hang until recently. The following
is a process list and one of the taper process is hang with state D. Does
anyone have the same problem? How could it be solved?
backup 16978
>This works, but it doesn't work the way I thought it might. I didn't
>understand IRG (Inter Record Gaps) but now, I think I have a better
>grasp of it. ...
You've got the right idea, but they are not called inter record gaps.
Those are the spaces (if the technology uses them) between records on
Hi! I'm trying to build amanda on a Solaris 2.6 box (I don't know if there are
other things that would describe it better -- if you can think of anything,
please let me know...).
I ran configure with the following line (running as root):
># ./configure --with-user=amanda --with-group=root --pref
Hello everybody.
Each day that Amanda runs, I get a message similar to the following:
/-- sbs/usr lev 1 STRANGE
sendbackup: start [sbs:/usr level 1]
sendbackup: info BACKUP=/usr/linux/bin/gtar
sendbackup: info RECOVER_CMD=/usr/linux/bin/gtar -f... -
sendbackup: info end
? gtar:
./local/e
Is it possible to have a tape verified by xfsdump or xfsrestore if those
utilities are combined with Amanda under SGI IRIX? I am evaluating
Amanda for backups but verification seems to be a problem with xfsdump
and xfsrestore utilities. Can Amanda overcome this somehow? I have XFS
filesystems o
I'm getting an error when running amrecover which is coming from my
configuration I suppose. It's trying to use "0" as the device, when it
should look in the chg-scsi.conf for configuration 0 and see the device
name, right? And if I change my tapedev to "/dev/nst0" it screws
everything else
Dear Amanda Users,
I have two tape drives and would like to split my backups between them.
I understand that amanda does not presently have an automatic way to do
this.
To do it manually, do I simply create two schedules (say Daily-A and
Daily-B) and run them both independently?
One of my drive
Dear Amanda Users,
I continue to have the problems listed below in the log. I have
specified a tapetype length of 4 meg (while the tape is advertised
at 66000 meg) but I still get "out of tape" in addition to "Bad file
descriptor" which I was tole in a previous reply is related to hitting
EO
I recently posted some build data about versions 2p2 and 3b3 with
regard to the results of various configure options related to libtool
as well as changing the version of libtool...
The 2p2 builds performed without a problem
when "--disable-libtool" was set or unset.
The 3b3 build dies with li
>Is it possible to relabel a tape, but preserve the existing data on the
>tape ?
No. It's a fundamental aspect of tapes that any write operation sets
end of device (i.e. there ain't nothing after that).
Some devices support "partitioning", but that's a completely different
animal and not releva
>I have a client with 4 fast processors and would like to use at least 2 or 3
>of them if possible for dumps. ...
Dumps can be very I/O bound. Make sure you have enough bandwidth as well.
>Is it possible to get amanda to dump more
>than 1 partition on the same client at a time to the backup se
>I was getting a selfcheck error on one of my sun boxes I just built amanda
>on and this is what I found in /var/adm/messages:
>
>jupiter inetd[179]: amanda/udp server failing (looping), service terminated
>
>Any ideas on what I need to fix here?
Have you gone through the FAQ checklists:
http:
>... When ever I
> attempt to do a amrecover of the directory on /var/mail I get the
>following:
Ummm, you didn't post what amrecover was saying. That might help :-).
But I'll save you one round trip. What's in the corresponding
/tmp/amanda/amrecover*debug file. Should be something like th
unsubscribe amanda-users
>Is it possible to have a tape verified by xfsdump or xfsrestore if those
>utilities are combined with Amanda under SGI IRIX? ...
The current sources should do that just fine. What version of Amanda
are you using?
>Amanda for backups but verification seems to be a problem with xfsdump
>and xfs
>... The following
>is a process list and one of the taper process is hang with state D. ...
The 'D' state means the process is stuck in the kernel doing I/O.
That is either a hardware or an OS (kernel) problem. You'll have to
start looking there. Nothing Amanda does should be able to cause th
>I'm getting an error when running amrecover ...
Then why didn't you post the error message??? :-)
In any case, I can guess what's wrong ...
>... It's trying to use "0" as the device, when it
>should look in the chg-scsi.conf for configuration 0 and see the device
>name, right? ...
No. A
>This looks to me to be a temporary index file that has been removed after
>tar started.
Yup.
>Is this a problem? ...
Nope.
>If it isn't a problem, is there a way to prevent it? ...
You should be able to give GNU tar an exclusion pattern. I **think**
the following would do it:
exclude
>This is what I'm getting when I try to do an amlabel to a new tape. Is this
>an amlabel problem or a tape drive problem?
What version of Amanda? What OS?
>rewinding, reading label, reading label: Value too large for defined data type
I *think* what this says is that amlabel was built for 32
>The only odd output from configure that I noticed was:
>>checking whether posix fcntl locking works... no
>>checking whether flock locking works... no
>>checking whether lockf locking works... no
>>checking whether lnlock locking works... no
>>configure: warning: *** No working file locking capab
* John R. Jackson ([EMAIL PROTECTED]) [20020314 23:15] thus spake:
> >This looks to me to be a temporary index file that has been removed after
> >tar started.
>
> Yup.
>
> >Is this a problem? ...
>
> Nope.
>
> >If it isn't a problem, is the
Here are my questions
1) how amanda records how many runs
performed in a dumpcycle? Let's say if dumpcycle=7 and runspercycle =
5
and what happens if I configure 6 cron jobs
to run from monday to friday
2) what happens if runspercycle >
dumpcycle?
3) if I want to apply the following
str
as title
hello all,
1) i have both windows and os/2 clients down here.
now with amanda installed on my linux box can i take
back-up's of both those os's i.e os/2 and win.
2) how can i take back-up's on os/2 operating system.
should i include any script in my os/2 clients.
3) what all should i include in m
58 matches
Mail list logo