On Tue, Nov 20, 2018 at 07:34:15 -0800, Chris Miller wrote:
> BQ_BEGIN
> Also, 'amtape inventory' will tell you what amanda is aware of.
> This info is based on the cached meta-info for the changers, and might
> not be accurate (stale). 'amtape update' will force a rescan
> of the (virtual) ch
Hi Nathan,
- Original Message -
> From: "Nathan Stratton Treadway"
> To: "amanda-users"
> Sent: Monday, November 19, 2018 2:11:14 PM
> Subject: Re: Taper scan algorithm did not find an acceptable volume.
> A common convention (i.e. Amanda doesn
2:14 PM
To: Chris Miller
Cc: Debra S Baddorf ; amanda-users
Subject: Re: Taper scan algorithm did not find an acceptable volume.
ATTENTION: This email came from an external source. Do not open attachments or
click on links from unknown senders or unexpected emails.
> On Nov 20, 2018, at 9
> On Nov 20, 2018, at 9:54 AM, Chris Miller wrote:
>
> Hi Jon,
>
> - Original Message -
>> From: "Jon LaBadie"
>> To: "amanda-users"
>> Sent: Monday, November 19, 2018 1:44:35 PM
>> Subject: Re: Taper scan algorithm did not
Hi Chris,
> From: "Chris Nighswonger"
> To: "Chris Miller"
> Cc: "amanda-users"
> Sent: Tuesday, November 20, 2018 10:51:13 AM
> Subject: Re: Taper scan algorithm did not find an acceptable volume.
> amcheck also checks the clients. I see no
uot;amanda-users"
>> *Sent: *Tuesday, November 20, 2018 9:56:12 AM
>> *Subject: *Re: Taper scan algorithm did not find an acceptable volume.
>>
>> On Tue, Nov 20, 2018 at 10:58 AM Chris Miller wrote:
>>
>>> Hi Jon,
>>>
>>> This is confirmed
On Tue, Nov 20, 2018 at 1:45 PM Chris Miller wrote:
> Hi Chris,
>
> *From: *"Chris Nighswonger"
> *To: *"Chris Miller"
> *Cc: *"amanda-users"
> *Sent: *Tuesday, November 20, 2018 9:56:12 AM
> *Subject: *Re: Taper scan algorithm did not find a
Hi Chris,
> From: "Chris Nighswonger"
> To: "Chris Miller"
> Cc: "amanda-users"
> Sent: Tuesday, November 20, 2018 9:56:12 AM
> Subject: Re: Taper scan algorithm did not find an acceptable volume.
> On Tue, Nov 20, 2018 at 10:58 AM Chris M
On Tue, Nov 20, 2018 at 10:58 AM Chris Miller wrote:
> Hi Jon,
>
> - Original Message -
> > From: "Jon LaBadie"
> > To: "amanda-users"
> > Sent: Monday, November 19, 2018 1:44:35 PM
> > Subject: Re: Taper scan algorithm did not find
Hi Jon,
- Original Message -
> From: "Jon LaBadie"
> To: "amanda-users"
> Sent: Monday, November 19, 2018 1:44:35 PM
> Subject: Re: Taper scan algorithm did not find an acceptable volume.
> As a general approach, an admin should not run new software
Hi Jean- François,
From: "Jean-Francois Malouin"
To: "amanda-users"
Cc: "Chris Miller"
Sent: Monday, November 19, 2018 12:18:16 PM
Subject: Re: Taper scan algorithm did not find an acceptable volume.
BQ_BEGIN
Read 'man amanda-taperscan'
> On Nov 19, 2018, at 4:11 PM, Nathan Stratton Treadway
> wrote:
>
> Keep in mind that the label is the identifier Amanda uses to communicate
> with you about what it's doing and/or looking for. So you do care a
> little bit what the labels are, since you'll see them in reports,
> command ou
(Quick reply, to add to what Jean-Francois wrote)
On Mon, Nov 19, 2018 at 09:15:31 -0800, Chris Miller wrote:
> library experience trying to use vtape. For example, do I have to
> label my vtapes, or can I tell AMANDA to label them for me since I
> don't think I really care what the label says
i-successful results, meaning two
> completed and one left artifacts on the holding disk but never got written to
> vtape. Later that day, I ran a second amdump on all three clients, but this
> time all three clients failed. amcheck reports: "Taper scan algorithm did not
> find a
ing two
> completed and one left artifacts on the holding disk but never got written to
> vtape. Later that day, I ran a second amdump on all three clients, but this
> time all three clients failed. amcheck reports: "Taper scan algorithm did not
> find an acceptable volume.&quo
k but never got written to vtape.
Later that day, I ran a second amdump on all three clients, but this time all
three clients failed. amcheck reports: "Taper scan algorithm did not find an
acceptable volume."
Clearly I don't understand how to manage vtapes. Or maybe my configurati
16 matches
Mail list logo
