- Original Message -
From: root linux [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial
Discussion
asterisk-users@lists.digium.com
Sent: Tuesday, August 23, 2005 4:48 AM
Subject: Re: [Asterisk-Users] Unable to create
channel of type 'Zap'
My context in zapata.conf
Yep, I am connecting to some other equipemnt...its a
Clarent gateway equipped with a National Microsystems
(Quad Port)
--- El Flynn [EMAIL PROTECTED] wrote:
Hi there,
Are you getting the E1 span in from Telekom, or are
you connecting to some other
equipment?
root linux wrote:
My
Please confirm if PRI span is up
on CLI, type pri show span 1 it must be UP before you can dial through it.
regards,
Umair bari
On 8/25/05, root linux [EMAIL PROTECTED] wrote:
Yep, I am connecting to some other equipemnt...its a
Clarent gateway equipped with a National Microsystems
(Quad
Which side of the span is actually providing the clock? The Asterisk side
or the other side (telco?) If it is the telco the clock needs to be set to
'0'.
Span=1,0,0,cas,hdb3
-Nate
-Original Message-
From: root linux [mailto:[EMAIL PROTECTED]
Sent: Sunday, August 21, 2005 10:30 PM
To:
Actually I am connecting the Digium TE110P to another
box which is using National MicroSystems
So, my config in zaptel.conf should be: -
span=1,0,0,cas,hdb3
Or
span=1,1,0,cas,hdb3
I have no problem connecting to the telco side with
the below setting in zaptel.conf: -
span=1,1,0,cas,hdb3
I
AM
Subject: Re: [Asterisk-Users] Unable to create
channel of type 'Zap'
My context in zapata.conf is default
But still cannot dial via Zaptel (TE110P)
--- Craig Guy [EMAIL PROTECTED] wrote:
Hi rootlinux,
I'm in Australia where we also uses crc4 on the
span
line
I am using TE110P E1 Card and using the wcte11xp
driver.
Here is my ztcfg -vvv result: -
Zaptel Configuration
==
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet
(DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default)
(Slaves: 01)
Channel 02: Individual Clear
My context in zapata.conf is default
But still cannot dial via Zaptel (TE110P)
--- Craig Guy [EMAIL PROTECTED] wrote:
Hi rootlinux,
I'm in Australia where we also uses crc4 on the span
line, could you also
show the relevant section of your zapata.conf?
Looking at your
@lists.digium.com
Sent: Tuesday, August 23, 2005 4:48 AM
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap'
My context in zapata.conf is default
But still cannot dial via Zaptel (TE110P)
--- Craig Guy [EMAIL PROTECTED] wrote:
Hi rootlinux,
I'm in Australia where we also uses crc4
On Monday 22 Aug 2005 04:30, root linux wrote:
My zaptel.conf config: -
# Below setting is for E1
span=1,1,0,cas,hdb3
bchan=1-15
bchan=17-31
dchan=16
loadzone = us
defaultzone=us
You do not appear to be in the US but Malaysia. Not sure what these
should be.
My zapata.conf config: -
Hi rootlinux,
I'm in Australia where we also uses crc4 on the span line, could you also
show the relevant section of your zapata.conf? Looking at your
extensions.conf excerpt, it is customary to group the b channels eg
Dial(Zap/g1/12345678) and there should be an entry in zapata.conf under
Have you placed a group=1 in zapata.conf ?
For a trial, you can use: exten = 203,1,Dial,Zap/1/onetelephonnumber
Aitor a écrit :
I new in asterisk world so, please, forgive me if I say something stupid.
At least, and after a lot of tryes, the isdn card seems to be registered:
[chan_zap.so] =
Yes I have group=1. Also I've try with
exten = 203,1,Dial,Zap/1/number
and always the same message:
May 27 20:56:20 NOTICE[1041]: app_dial.c:759 dial_exec: Unable to
create
channel of type 'Zap'
== Everyone is busy/congested at this time
I think that
You have 2 problems.
Zap/g2 is one. You are trying to dial out a non-existent Zaptel group.
Change your TRUNK variable to Zap/1-1 (or just Zap/1 will do).
Also, you are stripping the 1st number off your outgoing call. If you don't
want to do this, then change TRUNKMSD to 0.
- Original
On Wed, 20 Apr 2005 18:33:44 +
Jaime Blanco [EMAIL PROTECTED] wrote:
Hi,
I just installed the asterisk and the X100P card. I can
receive calls from PSTN and it can ring on a Grandstream
SIP Phone. From the SIP Phone I can dial the demo
extension on asterisk pbx. The issue is as soon as
To help you out i will post my config files... The only problem that i have
is in an active call i can't get my phones to send responses to voice menus
such as dialling the voicemailmain cmd.
I am using a TDM04b card with four ports instead of one my zapata.conf file
looks like:
[trunkgroups]
asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap'
Date: Wed, 20 Apr 2005 15:38:31 -0400
MIME-Version: 1.0
X-Originating-IP: [64.9.40.49]
X-Originating-Email: [EMAIL PROTECTED]
X-Sender: [EMAIL PROTECTED]
Received: from lists.digium.com
check that the phone cord is correctly attached to the tdm11b.
Also verify if the channel isnt alarmed with
zap show channel N whewre N the channel number.
[EMAIL PROTECTED] wrote:
Hello
i use TDM11B,and i'm connecting the analog telephone to channel 1, and i'm
trying to use
*CLI dial 11
at
Firstly, thanks too much for your help...
i ensured that the phone is already connected fine.
when i used command :
show channel 1
the result is
1 is not a known channel
i tried also show channel 1, show channel 2, show channel 3 show channel 4
and i obtained the same result.
waiting for
i also tried
localhost*CLI show channels
and i get:
OSS/dsp (local 11 2 ) Ringing (None)(None)
1 active channel(s)
and then i tried
localhost*CLI show channel OSS/dsp
and i get
-- General --
Name: OSS/dsp
Type: Console
UniqueID:
I'm trying to configure a 100xp fxo card for the first time but am not able to
get the channel type ZAP recognised
app_dial.c:743 dial_exec: Unable to create channel of type 'Zap'
WHen starting asterisk with -vvvgc i see
[chan_zap.so] = (Zapata Telephony w/PRI)
== Parsing
Hmmm, when you plug the phone line into the x100p card slot (from
PSTN) then asterisk should say something like: alarm cleared blah blah
blah...
then try the call again. If your not getting that message try changing
the signalling in zaptel zapata.conf to fxsks=1, signalling=fxs_ks
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of VenkataRao Chimata
Sent: Saturday, January 15, 2005 12:30 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Unable to create channel of type 'Zap'
Hi friends
I
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of VenkataRao Chimata
Sent: Saturday, January 15, 2005 12:30 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Unable to create channel of type 'Zap'
Hi friends
I
Date: Sat, 15 Jan 2005 13:19:02 -0500
From: Brent Franks [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] Unable to create channel
of type 'Zap'
To: 'Asterisk Users Mailing List - Non-Commercial
Discussion'
asterisk-users@lists.digium.com
Message-ID: [EMAIL PROTECTED]
Content-Type: text
Hi there
I have
troubles while installing oh323.
I got
from cvs the asterisk_oh323, and then I tried to make install, in the end I have this:
...
/usr/include/ptlib/array.h:341:
`dynamic' undeclared (first use this function)
/usr/include/ptlib/array.h:341:
only constructors take
On Sun, 2005-01-09 at 12:12, Tim Davidson wrote:
I've looked around so hard for days now for a solution to my problem.
I'm new to asterisk but I've managed to get an IAX coinnection working
to voiptalk.org, ive got sip to sipgate. But I just can't get my
X100P clone working.
Have you done
Leonardo J. Tramontina wrote:
No, I don't have anything connected on the TE110P.
After the Unable to create channel of type 'Zap' (cause 0) message,
I also get the CHANUNAVAIL...
Is not possible test a channel from the card without connections on it??
Leonardo
*snipped
no, the only way is if
On Fri, 2004-12-03 at 16:39 -0300, Leonardo Tramontina wrote:
Hi,
I've created a test at extensions.conf like this with 3 steps:
; When dial , get the first available channel and dial do 482343400
exten = ,1,Dial(Zap/g1/482343400,5,rt)
482-343-400
Are you missing a number? Looks
Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Friday, December 03, 2004 6:14 PM
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause
0)
On Fri, 2004-12-03 at 16:39 -0300, Leonardo Tramontina wrote:
Hi,
I've created a test at extensions.conf like
Critchfield
[EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Friday, December 03, 2004 6:14 PM
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap'
(cause 0)
On Fri, 2004-12-03 at 16:39 -0300, Leonardo Tramontina wrote:
Hi,
I've created
On Fri, 2004-12-03 at 19:02 -0200, Leonardo J. Tramontina wrote:
No, I'm not in USA!!
Besides this, my Asterisk is not making external calls; it is installed for
some tests...
I forgot to say... I'm making these tests in order to test the TE110P card
we bought.
Okay, then I assume you
-
From: Julio Arruda [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Friday, December 03, 2004 7:20 PM
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause
0)
Remarks inline
Leonardo J. Tramontina wrote:
No, I'm
Leonardo J. Tramontina wrote:
I don't think the problem is in the number of digits because, as I said,
I'm not making a real call... I'm not redirecting to the real number
482343400 (my Asterisk is not connected to another network)... I just
want to allocate one channel to test my TE110P!!!
Do
PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Friday, December 03, 2004 9:12 PM
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause
0)
Leonardo J. Tramontina wrote:
I don't think the problem is in the number of digits because, as I
Leonardo J. Tramontina wrote:
No, I don't have anything connected on the TE110P.
After the Unable to create channel of type 'Zap' (cause 0) message, I
also get the CHANUNAVAIL...
Is not possible test a channel from the card without connections on it??
Correct.
On Sun, 2004-11-07 at 13:37, Adnan Ahmed wrote:
hi,
I am using TDM400 with FXS and FXO modules,everytime i try to make call
of my analog phone it gives following errors:
Executing Dial( , ) in
new stack
app_dial.c:554 dial_exec:Unable to create
Verify what
zap show channel N says.
I have a fxo channel alarmed, and even I unplugged and re-plugged my
phone cord, and stoped and restarted my * box, I needed to unload the
wcfxs and zaptel modules and load them again to get the alarm cleaned...
Remember to replace N for your channel
I had this after my last CVS update.
A line in Zaptel.conf was set to fxsls=1 instaead of fxsks=1
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Wim Venneman
Sent: 24 February 2004 19:17
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Unable to
Dave,
I have fxsks = 1
(fxsls is for loopstart prot. and it doesn't work for me)
Wim
- Original Message -
From: David J Carter [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, February 24, 2004 8:33 PM
Subject: RE: [Asterisk-Users] Unable to create channel of type 'Zap'
I had
is cropping up.
- B
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Wim Venneman
Sent: Tuesday, February 24, 2004 2:47 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap'
Dave,
I have fxsks
Franks [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, February 24, 2004 10:21 PM
Subject: RE: [Asterisk-Users] Unable to create channel of type 'Zap'
The best thing I can recommend is giving Digium a call. That's part of
the reason to buy the cards from Digium, as the support is included
Do you have your zap channel in asterisk when you type zap show channels
?
If not than make sure you have a proper config files (zaptel.conf
zapata.conf)
Martin
On Thu, 29 May 2003, Eduardo Goncalves wrote:
Hi list,
I have the follow configuration:
===
extension.conf:
Then propably your board stoped taking interrupts. Try changing the PCI
slot or IRQ. Make sure you don't run X-windows.
regards
Martin
On Thu, 29 May 2003, Eduardo Goncalves wrote:
On Thu, 29 May 2003 11:41:01 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
Do you have your zap channel
On Thu, 29 May 2003 12:08:32 -0700
Andrew Gillham [EMAIL PROTECTED] wrote:
Does it work without the group? e.g. Zap/1
Also, does 'zap show channel 1' look ok?
-Andrew
yeap, I tried Zap/1 and it didn't work. :~(
*CLI zap show channel 1
Channel: 1
File Descriptor: 17
Span: 1
Extension:
On Thu, 2003-05-29 at 14:27, Eduardo Goncalves wrote:
On Thu, 29 May 2003 14:08:01 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
Then propably your board stoped taking interrupts. Try changing the PCI
slot or IRQ. Make sure you don't run X-windows.
My box has only one slot. I
Check whether strace -xx cat /dev/zap/1 gives you any output
If it stops and waits than your board is not taking interrupts.
Is the board running on the separate IRQ ?(/proc/interrupts)
Martin
On Thu, 29 May 2003, Eduardo Goncalves wrote:
On Thu, 29 May 2003 14:08:01 -0500 (CDT)
Martin
On Thu, 29 May 2003 14:32:37 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
Check whether strace -xx cat /dev/zap/1 gives you any output
If it stops and waits than your board is not taking interrupts.
Is the board running on the separate IRQ ?(/proc/interrupts)
Martin
The command
On 29 May 2003 14:32:01 -0500
Steven Critchfield [EMAIL PROTECTED] wrote:
What MB are you using, and what chipset is on it?
Silicon Integrated Systems [SiS] 620
Eduardo
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
So now that I finally relize that you're using T1 or E1 circuit
Do you have a ISDN PRI or an analog ciruit ?
What's the status of the span in zttool or in (/proc/zaptel/1).
Is it OK, RED, YELLOW ?
Martin
On Thu, 29 May 2003, Eduardo Goncalves wrote:
On Thu, 29 May 2003 14:32:37 -0500
On Thu, 29 May 2003 14:32:37 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
Check whether strace -xx cat /dev/zap/1 gives you any output
If it stops and waits than your board is not taking interrupts.
Is the board running on the separate IRQ ?(/proc/interrupts)
Sorry Martin, I
Didn't you just write a post before that it was running ?
The EBUSY means that you propably have asterisk running and the port is
busy or you have strace line on some other console
Martin
On Thu, 29 May 2003, Eduardo Goncalves wrote:
On Thu, 29 May 2003 14:32:37 -0500 (CDT)
Martin Pycko
On Thu, 29 May 2003 14:58:09 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
So now that I finally relize that you're using T1 or E1 circuit
Do you have a ISDN PRI or an analog ciruit ?
What's the status of the span in zttool or in (/proc/zaptel/1).
Is it OK, RED, YELLOW ?
Martin
So it means that the board is working all right but there is problem with
the telco or you're using diffrent signalling for your circuit.
Martin
On Thu, 29 May 2003, Eduardo Goncalves wrote:
On Thu, 29 May 2003 15:06:12 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
Didn't you just
On Thu, 29 May 2003 15:26:25 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
So it means that the board is working all right but there is problem with
the telco or you're using diffrent signalling for your circuit.
Martin
I've just called my telephony provider and reliaze that the
I think they are hardcoded. But what do you exactly refer to by
signalling bits ?
Martin
On Thu, 29 May 2003, Eduardo Goncalves wrote:
On Thu, 29 May 2003 15:26:25 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
So it means that the board is working all right but there is problem with
On Thu, 29 May 2003 16:16:29 -0500 (CDT)
Martin Pycko [EMAIL PROTECTED] wrote:
I think they are hardcoded. But what do you exactly refer to by
signalling bits ?
Martin
Bits To tell the status of a channel.
It's four (ABCD) Transmit/Receive signaling bit patterns for the Idle and Seized
57 matches
Mail list logo