- Arno Lehmann [EMAIL PROTECTED] wrote:
Hi,
On 6/4/2007 3:54 PM, Lonny Selinger wrote:
Setup:
I have 2 DLT drives (a and b) set up to accept jobs dedicated to
each
drive. Certain types of jobs go to a and certain types go to b and
this seems to work fine. The problem I'm
Setup:
I have 2 DLT drives (a and b) set up to accept jobs dedicated to each drive.
Certain types of jobs go to a and certain types go to b and this seems to work
fine. The problem I'm running into is having a drive request media in another
drive. Both are valid for writing and are in the same
- Ryan Novosielski [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
If you don't want them getting crossed, you need to set two different
media types for the two drives. Media type is an arbitrary name and
is
only used for selection purposes -- it does not have to
All,
I've been looking around for a bit but I can't seem to find a good template for
creating a scratch pool. I'm assuming this is pretty much all I need(?):
Pool {
Name = Scratch
Pool Type = Backup
Label Format = BTRTG-
}
So far it looks like the only directive you can assign to Pool
Just curious how this is calculated. The volume usage always shows 0% average
even with data on the volume. I was just wondering if this was another option I
needed to add to me existing config.
Anyone?
Regards,
Lonny
-
- Eric Bollengier [EMAIL PROTECTED] wrote:
Hi,
Just curious how this is calculated. The volume usage always shows
0%
average even with data on the volume. I was just wondering if this
was
another option I needed to add to me existing config.
Anyone?
It takes the average
I'm running MySQL
Any errors in the apache error log?
There isn't a thing :( I had it tailed while I was trying to connect
and
nothing showed up. I was looking when it files through the web
interface
and also when it was successful running it as root from command line
but
I'm sure this has been covered but I can't for the life of me find it! ... I
had bweb installed before and everything was working great. Then I decided to
start from scratch and got everything installed again ... but now when I go to
the list of jobs or click the Jobs link ... it takes a long
- Ralf Gross [EMAIL PROTECTED] wrote:
Lonny Selinger schrieb:
I'm sure this has been covered but I can't for the life of me find
it! ... I had bweb installed before and everything was working
great. Then I decided to start from scratch and got everything
installed again ... but now
Just curious (I'm probably doing this wrong) ... Can you use the RunBeforeJob
option to specify a script to run before the backup takes place? The reason I'm
wondering is, I've created a script that shuts down some services, copies all
the files to a temp area then starts the services back up
Is there any way to specify job and file retention based on job or schedule
rather than client? Just wondering what options in the hashes are viable in
other hashes if any. I've created daily, weekly, and monthly jobs and for each
I would like to have different retention periods.
By creating
On Wednesday 28 March 2007 16:59, Lonny Selinger wrote:
Is there any way to specify job and file retention based on job or schedule
rather than client? Just wondering what options in the hashes are viable in
other hashes if any. I've created daily, weekly, and monthly jobs and for
each
I
Hi everyone,
I am trying to add a windowes XP client to my backup infrastructure. I
already have one, but when i tried to add the second with exact same
configuration, I recieve the following errors where tracfire is the bacula
server, when i run the job.
28-Mar 12:53 syru156-51-fd:
If I understand this correctly, you need to set up daily, week, and
monthly pools. each pool can have its own retention periods.
Why does it sound so obvious now :/ This is what I need to do you're right.
Because I don't have a changer at home and only two drives it would be nice to
only
happens if you change that to tracfire.itsdomain.com?
On 3/28/07, Lonny Selinger [EMAIL PROTECTED] wrote:
Hi Lonny,
client fd,conf file does not have any place where the server ip or name
is
defined.It justs has the name of the director, which I believe has
nothing
to do
was: gethostbyname() for host tracfire failed:
I'm assuming tracfire is the director you can not conenct to, and it looks
like it's becasue it doesn't know what its' IP is (can't resolve in DNS).
--
L
Regards
On 3/28/07, Lonny Selinger [EMAIL PROTECTED] wrote:
Hi everyone,
I am trying
not
resolve this, it wont connect :-) This doesn't however explain why if you
provided the FQDN of the master director it only tried using the base host
name *shrug*
Either way, glad you got it working!
--
Lonny
regards
On 3/28/07, Lonny Selinger [EMAIL PROTECTED] wrote:
If I issue status client
Any syslog or OS console messages?
There wasn't for a while but when I tried to erase the tape again I did see
some messages in dmesg that pointed me to either the drive or the tape. I was
using a density code of 0x84 (35G Uncompressed with 0 byte/variable block
size) and the messages indicated
I'm using a DLT7000 drive and DLT IV tapes (35/70) and basically decided to
start fresh and start my backups for real after testing and getting things
working.
I toasted the database tables etc, and re-labled a couple of tapes:
1) mt -f /dev/nst0 status (verify density)
# mt -f /dev/nst0 status
again and verify the volume is assigned to
the propper pool I guess and see if that does anything.
--
L
Lonny Selinger wrote:
I'm using a DLT7000 drive and DLT IV tapes (35/70) and basically decided to
start fresh and start my backups for real after testing and getting things
working.
I
On Mon, 26 Mar 2007, Lonny Selinger wrote:
2.5 hours later I relabeled as lited above. Result ... after some backups
again it went to 9.3G and error'd out again. What could I possibly be
missing?
Are there other files I should remove when starting from scratch or is there
another way
It'd help if you told us what the errors are that you are seeing. You
may be having other issues not related to your tapes or your drive.
Ok this time I kept bconsole open when I retried everything and this is what I
got:
26-Mar 11:11 amanda-dir: No prior Full backup Job record found.
26-Mar
When you say you checked/updated the Windows machine client config,
exactly what file(s) did you look at? Reason I ask is I just completed
an upgrade from v1.36 to v2.0.3 on about 80 clients (5 of them being
Windows) and noticed that the config is now in a different place on my
Windows
Just thinking out loud ... I know in the config I'm specifying IP addresses
but is it possible there is an issue with DNS on the windows side? On the
Linux machines I am actually using host files, maybe I need some kind of host
file entry on the windows machines?
--
Lonny
--
To mess up a Linux
For everyone who has contributed thanks!! ... I seem to have everything
working now, although I have NO idea what I did. Basically I figured since
it's such a simple install I'll toast my existing client install and start
from scratch. After doing this everything works. I kept a backup copy of the
On Tue, Mar 20, 2007 at 09:08:50PM -0600, Lonny Selinger wrote:
I'm sure this has been tapped before but I can't seem to figure out what
else
could be causing my issue. I have set up a Windows machine as a client to
test
a backup and keep getting authentication errors. After reading
I'm sure this has been tapped before but I can't seem to figure out what else
could be causing my issue. I have set up a Windows machine as a client to test
a backup and keep getting authentication errors. After reading the page on
auth issues as well as following the intuitive return from
You can try this version, it fixes some mysql broken stuff
http://bacula.svn.sourceforge.net/viewvc/*checkout*/bacula/trunk/gui/brestore/brestore.pl?revision=4356
You have to cleanup your database
drop table brestore_missing_path;
drop table brestore_pathhierarchy;
drop table
You can try this version, it fixes some mysql broken stuff
http://bacula.svn.sourceforge.net/viewvc/*checkout*/bacula/trunk/gui/brestore/brestore.pl?revision=4356
You have to cleanup your database
drop table brestore_missing_path;
drop table brestore_pathhierarchy;
drop table
Eric,
One more strange anomaly ... when I select the file I want, and then pick the
revision I want, then I hit restore and it says No File To Restore ... here
is the command line output:
Bvfs::get_all_file_versions:2662SELECT File.JobId, File.FileIndex,
File.Lstat,
File.Md5,
Hi,
Hi Eric :)
Which version of brestore/bacula are you using ?
bacula-2.0.3 and got brestore from bacual-gui of the same version
On Saturday 17 March 2007 02:22, Lonny Selinger wrote:
Still playing around. I managed to get brestore loading etc but I'm not
sure I'm doing it right. I
Still playing around. I managed to get brestore loading etc but I'm not sure
I'm doing it right. I have put brestore.pl and the brestore.glade file on my
Master (director) with the brestore.pl in my cgi-bin. When accessing it
through bweb it asks what I would like to open the file with so I used a
I've been having an issue doing restores and I know it has to be something I'm
missing but I can't put my finger on it just yet. The problem is the job
completes successfully but the directory I try to restore doesn't actually
restore (or if it does I don't know where to).
Here's a snip of the
Check /tmp/bacula-restores/home/clamav. It looks like you have a
successful restore anyway. Barring that, hell, do a find / -name clamav.
=R
Thanks guys that was it ... I did actually do a find / -name \*clamav\*
however in my haste I didn't realize i was on the wrong host (master rather
than
34 matches
Mail list logo