Re: [beagleboard] Re: ethernet doesn't work

Your board is able to communicate with default gateway so network connectivity is correct. Default gateway is not routing the packets further to next hop. You will not be able to connect to Internet even if you replace BBB with any other host/laptop also. And this doesn't seems problem of BBB. S

Re: [beagleboard] Re: CAUTION: musb: Babble Interrupt Occurred

That's what I'm running, so then maybe that's not the answer :) Any other ideas as to why the USB drops out? Regards, Rune On Thursday, 24 October 2013 00:05:01 UTC+2, RobertCNelson wrote: > > On Wed, Oct 23, 2013 at 5:01 PM, Rune B. Kalleberg > > > wrote: > > Have you confirmed that this pa

[beagleboard] Re: BeagleBone Black doesn't sometimes start. Only Power LED is on

Hello All, I am also having this problem - with a bench top power supply set to 5V and 5A, plugging into the barrel connector with no SD card inserted, so running the default Angstrom image from flash, the device will fail to boot at least 1 in 20 tries. A similar failure rate was observed on m

[beagleboard] Can't change permissions to make file executable on USB stick

I have an 4gb usb stick with the files to be written to my 16gb uSD card. I have a rcn-ee script "setup_sdcard.sh" to format the sdcard, expand and copy the files to the uSD card. The script is supposed to be executable is not and chmod ugo+x filename doesn't work to make it executable. Also it

[beagleboard] Re: beaglebone g_printer module and windows host

How did you load g_printer on the beaglebone board? Did you have to unload something first? I'm trying to get windows to see it as a printer, also. root@beaglebone:~# modprobe g_printer ERROR: could not insert 'g_printer': No such device root@beaglebone:~# modinfo g_printer filename: /l

Re: [beagleboard] Re: HDMI questions

On Wed, Oct 23, 2013 at 5:54 PM, mickeyf wrote: > Yes, I was definitely getting the impression that without signing up for the > $15K fee I could not view a legal copy of the spec. If I can find a monitor > or two that work with the BBB and that have known behavior that's plenty > good enough. Se

[beagleboard] Re: HDMI questions

Yes, I was definitely getting the impression that without signing up for the $15K fee I could not view a legal copy of the spec. If I can find a monitor or two that work with the BBB and that have known behavior that's plenty good enough. Section 8.5 Hot plug detect..."..does not indicate whet

Re: [beagleboard] Re: CAUTION: musb: Babble Interrupt Occurred

On Wed, Oct 23, 2013 at 5:01 PM, Rune B. Kalleberg wrote: > Have you confirmed that this patch works? That patch was first enabled with the "3.8.13-bone28" release.. > I'm running Debian Wheezy and > getting the same issue myself. Wifi dongle drops out and will not come back > up unless i power

[beagleboard] Re: CAUTION: musb: Babble Interrupt Occurred

Have you confirmed that this patch works? I'm running Debian Wheezy and getting the same issue myself. Wifi dongle drops out and will not come back up unless i power cycle. Would this kernel fix work with Debian? Or just Anstrom? I often get another message as well: [92458.978265] CAUTION: musb:

Re: [beagleboard] Re: HDMI questions

On Wed, Oct 23, 2013 at 4:35 PM, mickeyf wrote: > Even being able to know if an HDMI device was connected and powered on would > be very helpful. On one of the many posts here discussing HDMI it was > mentioned that "per spec" you should be able to read the EDID even with the > device powered off

[beagleboard] Re: HDMI questions

Even being able to know if an HDMI device was connected and powered on would be very helpful. On one of the many posts here discussing HDMI it was mentioned that "per spec" you should be able to read the EDID even with the device powered off (but maybe they meant in standby?), but in practice it

Re: [beagleboard] Beagle board 3D cad

http://circuitco.com/support/BeagleBoneBlack Gerald On Wed, Oct 23, 2013 at 4:18 PM, Brian wrote: > I am also looking for the 3D CAD file, specifically for the Beagle Bone > Black. > > >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because yo

Re: [beagleboard] Beagle board 3D cad

I am also looking for the 3D CAD file, specifically for the Beagle Bone Black. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emai

Re: [beagleboard] Building Beagleboard xM u-boot from (Mainline?) sources

Not touched via the DTS, but they are touched somehow. When I clear the GPIO 137 (or 138 or 139, to which I have LEDs connected) in U-Boot, the signal is correctly affected. Then I issue the boot command, and let the Linux start up. As soon as the "Starting kernel ..." message comes out on the

Re: [beagleboard] Re: HDMI questions

That is what the EDID is for and that is what the HDMI specification is for. Unfortunately the displays out there decide what part to the specification they want to meet. And with all these zoom modes and display settings, you can't really tell what the setup is on a particular screen. I suppose t

[beagleboard] Re: HDMI questions

Yes, but... > Is there a reliable, guaranteed way to see if a given device display is > actually powered on? > > > Is it practical to say, boot using an LCD, check for the presence of an > HDMI display, then switch to the HDMI output under user control? > Thanks! -- For more options, visit

[beagleboard] Re: Failure loading device tree overlay into BBB Ubuntu, seems to be loading incorrect *.tbo file?

Update, recompiled with different name, and then overlay load appears to work /lib/firmware\> sudo sh -c "dtc -@ -O dtb -o cape-bone-pru-00A0.dtbo BB-BONE-PRU-00A0.dts" [19392.918341] bone-capemgr bone_capemgr.9: part_number 'BB-BONE-PRU', version 'N/A' [19392.918537] bone-capemgr bone_capemgr.9

Re: [beagleboard] Failure loading device tree overlay into BBB Ubuntu, seems to be loading incorrect *.tbo file?

I have an awful lot of work installed in bone20, retrying with 29 would first require a few days of additional work to get back to where I am now; will do if necessary. Bit Pusher On Wednesday, October 23, 2013 2:24:52 PM UTC-4, RobertCNelson wrote: > > On Wed, Oct 23, 2013 at 1:17 PM, Bit Pushe

Re: [beagleboard] Failure loading device tree overlay into BBB Ubuntu, seems to be loading incorrect *.tbo file?

On Wed, Oct 23, 2013 at 1:17 PM, Bit Pusher wrote: > Kernel Version: ubuntu-armhf 3.8.13-bone20 Care to retry with: v3.8.13-bone28 ? Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subsc

[beagleboard] Failure loading device tree overlay into BBB Ubuntu, seems to be loading incorrect *.tbo file?

Kernel Version: ubuntu-armhf 3.8.13-bone20 Overlay File: BB-BONE-PRU-00A0.dts (shown below) Compile: sudo sh -c "dtc -@ -O dtb -o BB-BONE-PRU-00A0.dtbo BB-BONE-PRU-00A0.dts" worked as far as I can tell Loading: /lib/firmware\> echo $SLOTS /sys/devices/bone_capemgr.9/slots sudo sh -c "echo BB-BO

Re: [beagleboard] New BBB ordered from Logic Supply received A5C instead of A6 - Should I return?

It does not matter. Why? Well, even if we are shipping say Rev A6, the distributor can still have Rev 5C in inventory. So knowing what is actually shipping does not have a lot of value. Gerald On Wed, Oct 23, 2013 at 11:53 AM, dansoton wrote: > Thanks Gerald, I appreciate your response. I just

Re: [beagleboard] Re: Bricked my BBB.

I suggest that you go to http://circuitco.com/support/index.php?title=Updating_The_Software and follow the instructions there. Holding the boot button that long is a wast of time. Gerald On Wed, Oct 23, 2013 at 12:49 PM, wrote: > Hi, > I have the same problem,I have not deleted any files. I

[beagleboard] Re: ethernet doesn't work

root@beaglebone:~# ping -c 10 172.17.89.254 PING 172.17.89.254 (172.17.89.254) 56(84) bytes of data. 64 bytes from 172.17.89.254: icmp_req=1 ttl=64 time=0.267 ms 64 bytes from 172.17.89.254: icmp_req=2 ttl=64 time=0.231 ms 64 bytes from 172.17.89.254: icmp_req=3 ttl=64 time=0.276 ms ^C --- 172.17.8

[beagleboard] Re: Bricked my BBB.

Hi, I have the same problem,I have not deleted any files. I have downloaded image of angstrom kernel and file-system from below link. https://s3.amazonaws.com/angstrom/demo/beaglebone/Angstrom-Cloud9-IDE-GNOME-eglibc-ipk-v2012.12-beaglebone-2013.06.20.img.xz and followed the procedure to b

Re: [beagleboard] New BBB ordered from Logic Supply received A5C instead of A6 - Should I return?

Thanks Gerald, I appreciate your response. I just wanted to check as my gut feeling was it was fine, but I didn't know if the problems fixed were likely to occur with the A5C. Thanks for putting my mind to rest. On a side note, is there any way of knowing when a revision has shipped to producti

Re: [beagleboard] eMMC broken?

You can forget the eMMC if you like. Gerald On Wed, Oct 23, 2013 at 11:17 AM, Orest Lenczyk wrote: > Thanks for your fast response. I was rather looking for some fsck-alike > command (can i access eMMC while booted from microSD ?) > I would like not to send it now for 2 reasons > > 1. its wor

Re: [beagleboard] Beaglebone Black in not working at all.

Yes, this is true. Maybe have the power supply plugged in and then plug it into the board may help. Gerald On Wed, Oct 23, 2013 at 11:16 AM, William Hermans wrote: > This happens to me from time to time also Gerald. We've had this > discussion before, and the only thing that really makes sens

Re: [beagleboard] eMMC broken?

Thanks for your fast response. I was rather looking for some fsck-alike command (can i access eMMC while booted from microSD ?) I would like not to send it now for 2 reasons 1. its working from SD (for now) 2. there is 99,98% chance that it was my bad :P so i will lose 2 weeks or even a month an

Re: [beagleboard] Beaglebone Black in not working at all.

This happens to me from time to time also Gerald. We've had this discussion before, and the only thing that really makes sense to me is power supply ramp time. But I'm no EE, especially one of your caliber. On Wed, Oct 23, 2013 at 6:37 AM, Gerald Coley wrote: > Did you try reflashing the softwar

[beagleboard] Re: LCD Display shifted left

Thanks David. I've downloaded the latest fb-test and compiled it. I'm not sure what the parameters should be. ./fb-test gets the response... fb-test 1.0.0 (tablet_rosa) fb res 1024x768 virtual 1024x2304, line_len 2048 dim 0mm x 0mm assert(common.c:62): : Invalid argument I tried the parameters

[beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

Robert, I've removed the links from the wiki. I'll clean up the instructions shortly. Daniel Jackson CircuitCo On Tuesday, October 22, 2013 9:45:09 AM UTC-5, Mickae1 wrote: > > Hi, > > I wanted to signal an error ( or not, but I double checked ) : > > > The Key ENTER of the LCD7 cap Rev A3 is c

Re: [beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

OK. That is the beagleboard.org Wiki. Not Circuitco. Let me check into it. Gerald On Wed, Oct 23, 2013 at 10:32 AM, Robert Nelson wrote: > On Wed, Oct 23, 2013 at 10:30 AM, Gerald Coley > wrote: > > Which Wiki is that? > > These two pages: > http://circuitco.com/support/index.php?title=Debian

Re: [beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

Which Wiki is that? Gerald On Wed, Oct 23, 2013 at 10:25 AM, Robert Nelson wrote: > On Wed, Oct 23, 2013 at 10:21 AM, Robert Nelson > wrote: > > On Wed, Oct 23, 2013 at 10:16 AM, Micka wrote: > >> Hi, I'm using the Ubuntu software from Robert Nelson. > > > > > > Must not be the lastest versi

Re: [beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

On Wed, Oct 23, 2013 at 10:30 AM, Gerald Coley wrote: > Which Wiki is that? These two pages: http://circuitco.com/support/index.php?title=Debian_On_BeagleBone_Black http://circuitco.com/support/index.php?title=Ubuntu_On_BeagleBone_Black Contain a link to the armhf.com image with the old broken k

Re: [beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

On Wed, Oct 23, 2013 at 10:25 AM, Robert Nelson wrote: > On Wed, Oct 23, 2013 at 10:21 AM, Robert Nelson > wrote: >> On Wed, Oct 23, 2013 at 10:16 AM, Micka wrote: >>> Hi, I'm using the Ubuntu software from Robert Nelson. >> >> >> Must not be the lastest version as, the top of the "3.8" branch

Re: [beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

On Wed, Oct 23, 2013 at 10:21 AM, Robert Nelson wrote: > On Wed, Oct 23, 2013 at 10:16 AM, Micka wrote: >> Hi, I'm using the Ubuntu software from Robert Nelson. > > > Must not be the lastest version as, the top of the "3.8" branch on > beagleboard.org and my source script is: > > + > + bone_lcd7_

Re: [beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

On Wed, Oct 23, 2013 at 10:16 AM, Micka wrote: > Hi, I'm using the Ubuntu software from Robert Nelson. Must not be the lastest version as, the top of the "3.8" branch on beagleboard.org and my source script is: + + bone_lcd7_cape_keys_00A3_pins: pinmux_bone_lcd7_cape_keys_00A3_pins { + pinc

Re: [beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

Hi, I'm using the Ubuntu software from Robert Nelson. Micka, On Wed, Oct 23, 2013 at 5:11 PM, Hieu Duong wrote: > Micka, > > I did not see any issue with the GPIO-mapped buttons on LCD7 rev A3 when > using with latest Angstrom factory software 2013-09-04. The offset is also > 0x154. Could you

[beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

Micka, I did not see any issue with the GPIO-mapped buttons on LCD7 rev A3 when using with latest Angstrom factory software 2013-09-04. The offset is also 0x154. Could you confirm which software you are using? -Hieu On Tuesday, October 22, 2013 10:18:36 AM UTC-5, Mickae1 wrote: > > A correct

[beagleboard] Re: Ethernet over USB no longer works

The problem has been solved. Running *journalctl *showed the error *Failed to insert module 'autofs4'*. modprobe autofs4 also failed. Yesterday I was playing around with the kernel modules and moved a file I shouldn't have (modules.dep.bin). Moving the file back solved the problem. --Mark On

Re: [beagleboard] Trouble with dtc

Robert, YOU ARE DA MAN! I have no idea how that reference to lsb-4.0 got in the sources.list file but once i removed it your script ran perfectly. All is well again! Thanks so much. Todd On Wed, Oct 23, 2013 at 10:35 AM, Robert Nelson wrote: > On Wed, Oct 23, 2013 at 9:31 AM, TB wrote: > > R

Re: [beagleboard] Trouble with dtc

On Wed, Oct 23, 2013 at 9:31 AM, TB wrote: > Robert, > > Thanks for the response and the great tools you supply but I guess due to my > "newbie-ness" I don't understand your reply. Why is the DTC not working > and/or thepatch not working on my BBB with Ubuntu so I can compile dts > files? Is it ju

Re: [beagleboard] Trouble with dtc

Robert, Thanks for the response and the great tools you supply but I guess due to my "newbie-ness" I don't understand your reply. Why is the DTC not working and/or thepatch not working on my BBB with Ubuntu so I can compile dts files? Is it just something messed up on my system? Thanks On We

Re: [beagleboard] Trouble with dtc

On Wed, Oct 23, 2013 at 9:09 AM, TB wrote: > Hi, > > I am using BBB with Robert Nelsons Ubuntu 13.04 (Sept release I think). > Everything has worked perfectly up till now. I am trying to add the UARTS > based on the Adafruit python library package. It looks like the dts files > are not getting co

[beagleboard] Trouble with dtc

Hi, I am using BBB with Robert Nelsons Ubuntu 13.04 (Sept release I think). Everything has worked perfectly up till now. I am trying to add the UARTS based on the Adafruit python library package. It looks like the dts files are not getting compiled and place in the /lib/firmware directory. So

Re: [beagleboard] Building Beagleboard xM u-boot from (Mainline?) sources

On Wed, Oct 23, 2013 at 8:58 AM, porkupan wrote: > Thanks, I understand. Turns out what I needed could have been accomplished > without rebuilding U-Boot. I had to set the value of a GPIO line, and there > is a U-Boot script command for that. > > So, a re-built U-Boot wouldn't have produced any

Re: [beagleboard] Re: ethernet doesn't work

Your configuration seems correct but it seems you cannot connect to your default gateway also. Please try to ping you default gateway also: "ping -c 10 172.17.89.254" (ping to 172.17.89.254 should work unless ICMP blocked) If you couldn't ping your default gateway also then check your physical co

Re: [beagleboard] Building Beagleboard xM u-boot from (Mainline?) sources

Thanks, I understand. Turns out what I needed could have been accomplished without rebuilding U-Boot. I had to set the value of a GPIO line, and there is a U-Boot script command for that. So, a re-built U-Boot wouldn't have produced any benefit. However, I need to figure out how to force thi

Re: [beagleboard] Recieve TCP with Beaglebone Black

On 23/10/2013, at 11:21, mitch.marcin...@gmail.com wrote: > Hi, I'm new in Beaglebone. > My problem: I want to recieve TCP packets with the beaglebone, and send this > string to a display for example. > Please read an Unix programming book. Or use one of those : http://netcat.sourceforge.ne

Re: [beagleboard] Beaglebone Black in not working at all.

Did you try reflashing the software on the board? http://circuitco.com/support/BeagleBoneBlack http://circuitco.com/support/index.php?title=Updating_The_Software Gerald On Wed, Oct 23, 2013 at 3:23 AM, wrote: > > My BB Black is not working since last night. as nothing seems to be wrong > but

Re: [beagleboard] Involuntary reseting of the BBBlack.

How are you powering the board? Gerald On Wed, Oct 23, 2013 at 6:09 AM, Jakub wrote: > Hello! > I have a problem. It is based on an involuntary resetting of the BBBlack. > This happens occasionally. About once a day. Totally when you least expect > it. > This happens more often on higher freq

[beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

I am the hardware team. I don't do SW. Especially for other peoples products. I suggest you contact the developer and maker of this product. It is not beagleboard.org. Gerald On Wed, Oct 23, 2013 at 7:56 AM, Micka wrote: > Is it your Gerald, that is responsible of this code ? > > > Micka, > >

Re: [beagleboard] New BBB ordered from Logic Supply received A5C instead of A6 - Should I return?

Considering the fact that we have yet to ship any A6 boards, it does not surprise me that they shipped the current version. Feel free to read the support Wiki, which describes the differences and see if that affects you. In my opinion, of course I am just the designer, I would just keep the A5C in

[beagleboard] Boot to terminal, bypass X (angstrom)

Hi there, simple question, on BeagleBone Black with Angstrom, how do I configure it to boot straight to terminal, bypassing X? As a side note, just to invite commentary, I want to begin configuring it to do stuff without the complications of X, so ultimately just want to SSH in and code up my s

[beagleboard] Re: OpenGL (SGX-PVR drivers) on BeagleBone Black

Hello, Was anyone successful with that? Currently I am trying to install the SGX driver on my BeagleBone. I got to the point where I was able to create some kernel modules. Has anyone an idea how to further proceed? Can maybe someone post a step by step guide on how to install the SGX drivers o

[beagleboard] Recieve TCP with Beaglebone Black

Hi, I'm new in Beaglebone. My problem: I want to recieve TCP packets with the beaglebone, and send this string to a display for example. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group.

[beagleboard] Re: ethernet doesn't work

*ifconfig -a :* eth0 Link encap:Ethernet HWaddr C8:A0:30:AD:17:88 inet addr:172.17.89.242 Bcast:172.17.89.255 Mask:255.255.255.0 inet6 addr: fe80::caa0:30ff:fead:1788/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1007 er

[beagleboard] Involuntary reseting of the BBBlack.

Hello! I have a problem. It is based on an involuntary resetting of the BBBlack. This happens occasionally. About once a day. Totally when you least expect it. This happens more often on higher frequencies ( 800Mhz, 1Ghz). On the console at the time of reset, nothing extra is displayed. No error's

[beagleboard] Re: Not able to load the new kernel on BBB

Hi, I have got the same problem with new kernel on BBB, I have downloaded the image of angstrom kernel http:// beaglebone/Angstrom-Cloud9-IDE-GNOME-eglibc-ipk-v2012.12-beaglebone-2013.06.20.img.x

[beagleboard] Re: Not able to load the new kernel on BBB

Hi, I have the same problem,I have not deleted any files. I have downloaded image of angstrom kernel and file-system from below link. https://s3.amazonaws.com/angstrom/demo/beaglebone/Angstrom-Cloud9-IDE-GNOME-eglibc-ipk-v2012.12-beaglebone-2013.06.20.img.xz and followed the procedure to

[beagleboard] USB camera device fails to be created

I have a USB camera attached to my BeagleBone Black, but the video device (/dev/video0) only sometimes succeeds in being created. I havent figured out exactly what conditions cause a success or failure, however This is dmesg output [8.990115] CAUTION: musb: Babble Interrupt Occurred [

[beagleboard] Beaglebone Black in not working at all.

My BB Black is not working since last night. as nothing seems to be wrong but it is not booting and only Power Led is ON any help? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To un

[beagleboard] Re: Writing EEPROM Using I2C Commands over U-Boot

Hi I don't understand the what you mean by "write b" or "write long". Could you please give the exact statements to execute? I believe the header the bootloader is looking for is "0xEE3355AA". Is that correct? Thanks and Regards, Abhijeet On Thursday, October 10, 2013 9:01:59 AM UTC-4, great.

[beagleboard] Re: ethernet doesn't work

*ifconfig -a :* eth0 Link encap:Ethernet HWaddr C8:A0:30:AD:17:88 inet addr:172.17.89.242 Bcast:172.17.89.255 Mask:255.255.255.0 inet6 addr: fe80::caa0:30ff:fead:1788/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1007 er

[beagleboard] New BBB ordered from Logic Supply received A5C instead of A6 - Should I return?

Hi, It may sound like a stupid question, but I just ordered a new BBB and although there was no mention of it on their website () I received an A5C revision board rather than the latest one. I am thinking of returning it and getting an A6 board instead, but I didn't know if it was necessary. A

Re: [beagleboard] Re: HDMI questions

On Wed, Oct 23, 2013 at 7:50 AM, mickeyf wrote: > Resounding silence after a week - No Voice Of Experience out there? It seemed obvious, like you mentioned... parse-edid... why reinvent the wheel? Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.

[beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

Is it your Gerald, that is responsible of this code ? Micka, On Wed, Oct 23, 2013 at 2:30 PM, Micka wrote: > Seriously ? No one care ? who is in charge of this change ? Who should I > contact ? > > Micka, > > > On Tue, Oct 22, 2013 at 5:18 PM, Micka wrote: > >> A correction to my mail, norma

[beagleboard] Re: HDMI questions

Resounding silence after a week - No Voice Of Experience out there? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails fro

[beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

On Wed, Oct 23, 2013 at 7:30 AM, Micka wrote: > Seriously ? No one care ? who is in charge of this change ? Who should I > contact ? > Please submit a patch/merge request to the 3.8 branch at https://github.com/beagleboard/kernel I do not have the "A3" revision of the LCD7, so I'm unable to test

[beagleboard] The Deck Linux now at Sourceforge

Wanted to let everyone know that The Deck penetration testing Linux distribution for the Beagle family is now available for download at Sourceforge at https://sourceforge.net/projects/thedeck/ Hopefully this will make life better for everyone who was trying to download from my server. The server

[beagleboard] Re: BBB & Ubuntu => Error in the last BB-BONE-LCD7-01-00A3.dts

Seriously ? No one care ? who is in charge of this change ? Who should I contact ? Micka, On Tue, Oct 22, 2013 at 5:18 PM, Micka wrote: > A correction to my mail, normally it should be 0x154, which was the case > before : > > bone_lcd7_cape_keys_00A3_pins: pinmux_bone_lcd7_cape_keys_00A3_pins

[beagleboard] Re: leopard lbcm5m1 not working

I don't know which kernel you are currently using but it is worth to try to set camera=li5m03. Also, please check if the probe of mt9p031 driver is called. If it is not, you need to also check its I2C address settings. Hope this helps! Regards, Ozkan. On Tuesday, October 22, 2013 5:01:32 AM U

[beagleboard] Re: BBB CryptoCape group

Good idea Joshua, I'm interested on ciphering topic too, even though for another reason than TOR but more about SSL/VPN endpoints for BBB. Nevertheless, I've learnt that there are cryptomemory so this could be really usefull. --> Subscribed Le mardi 22 octobre 2013 19:40:36 UTC+2, Jo