Where are you looking exactly?
Gerald
On Thu, Mar 20, 2014 at 8:51 AM, Kees k keeskwekkeb...@gmail.com wrote:
The 5V is fine (maybe a little spike of 0.8V after 60 ms PS).
However, the 3.3V gives a strange 2-stage powerup cycle. I compared a
revision A5C to a revision A6, see plots
I did not use the NCP349 on the BBB. What board are you looking at?
Gerald
On Thu, Mar 20, 2014 at 8:58 AM, Kees k keeskwekkeb...@gmail.com wrote:
I measure 3.3V on P9.3.
USB powering shows the 'good' powercycle, 5V via P9.5 shows a 'bad'
powercycle.
Btw, I seen that in revision A6 and
Press and HOLD the button until after the first user LED comes on. Sounds
like it is booting from eMMC and hanging when it detects the SD card.
Gerald
On Thu, Mar 20, 2014 at 9:14 AM, Rafael Fiebig-Bindner
r.fiebig.bind...@gmail.com wrote:
Hi everyone out there,
I wanted to flash my BBB
http://www.elinux.org/Beagleboard:BeagleBoneBlack#Terms_of_Use describes
what you can do with the HW information we provide.
Yes there is open source SW as well, but that has some more interesting
restrictions on the usage of that code and licenses that are involved.
Gerald
On Thu, Mar 20,
A cape. I hate capes. Maybe on the next revision I will just disable all of
them!
Thanks!
Gerald
On Thu, Mar 20, 2014 at 10:32 AM, Kees k keeskwekkeb...@gmail.com wrote:
Haha, I was looking at the wrong file (BB white A6). Sorry for the
trouble; it seems our cape causes this difference
Incomplete answers.
Geald
On Thu, Mar 20, 2014 at 2:25 PM, Robert Nelson robertcnel...@gmail.comwrote:
test
failed
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To
I would try the Debian version and see how it works for you. If something
is missing, you can ask an maybe it can get added.
http://beagleboard.org/latest-images
BTW, Ubuntu is based on Debian.
Gerald
On Thu, Mar 20, 2014 at 5:58 PM, janszymanski12...@gmail.com wrote:
Hi,
I need to get
http://www.elinux.org/Beagleboard:BeagleBoneBlack#Board_Shipments
Gerald
On Wed, Mar 19, 2014 at 3:32 AM, Micka mickamus...@gmail.com wrote:
Don't take it personally, I've nothing against you, or TI ... . You did a
great Job.
Micka,
On Tue, Mar 18, 2014 at 7:53 PM, Gerald Coley ger
hat and the TI hat are going to elicit
questions here that rightly belong somewhere else.
-david
On Wed, Mar 19, 2014 at 1:33 PM, Gerald Coley ger...@beagleboard.orgwrote:
You need to ask Arduino about what their plans are for their product.
Gerald
On Wed, Mar 19, 2014 at 1:29 PM
Contact me direct and I will give you what I have. It isn't much.
Gerald
On Wed, Mar 19, 2014 at 3:39 PM, gj...@vnssystems.com wrote:
Looking for the data sheet for the NXP TDA19988. It's not on any
distributor web site or the NXP web site. There are very few units in the
channel. Is
I have more.
Gerald
On Wed, Mar 19, 2014 at 3:49 PM, Robert Nelson robertcnel...@gmail.comwrote:
On Wed, Mar 19, 2014 at 3:39 PM, gj...@vnssystems.com wrote:
Looking for the data sheet for the NXP TDA19988. It's not on any
distributor web site or the NXP web site. There are very few
You can contact me. There is also the source code for the driver that we
have been using in our Linux images.
Gerald
On Wed, Mar 19, 2014 at 5:49 PM, Travis Estep teste...@gmail.com wrote:
I made a post about this exact thing here a couple of months back, and
received little help. One user
You can find the answers at the following link.
http://www.elinux.org/Beagleboard:BeagleBoneBlack
Yes it supports a 7 LCD panel.
Commercial temperature range.
It can be sustained.
It will be a round for a long time.
Gerald
On Tue, Mar 18, 2014 at 9:21 AM, acali...@bmti-alcen.com wrote:
No. The PMIC configuration is different between the two boards. BBB used
DDR3. The BeagleBone uses DDR2.
Gerald
On Tue, Mar 18, 2014 at 10:59 AM, bonnefoy.sebast...@gmail.com wrote:
Hello, in the past I used BB White edition and we make our own image with
our softwares.
I'd like to know if
has nothing to do with beagleboard.org but Gerald Coley is a TI
Engineer ?
Which part I didn't understand ?
Micka,
On Tue, Mar 18, 2014 at 5:44 PM, David Anders danders@gmail.comwrote:
Venkat,
On Monday, March 17, 2014 4:36:42 PM UTC-5, Venkat Bommakanti wrote:
On Monday, March
Thank you for confirming what I have been saying all along. We are going to
raise the price so we can get more capacity. How much we are not sure as of
yet, but it will be as little as possible to allow us to bring more CMs on
line and to make sure we can handle future cost issues in components.
Now this version would be less expensive to build for sure.
Gerald
On Mon, Mar 17, 2014 at 10:45 AM, José Luis Redrejo jredr...@gmail.comwrote:
2014-03-17 16:35 GMT+01:00 Charles Steinkuehler char...@steinkuehler.net
:
On 3/17/2014 10:01 AM, Gerald Coley wrote:
This is a great point. I
?
If this assembly option can be done with the same PCB it might solve both
cost and
capacity problems without creating a too big logistical nightmare.
-- Bas
On 17-3-2014 16:47, Gerald Coley wrote:
Now this version would be less expensive to build for sure.
Gerald
On Mon, Mar 17
We have already tried your suggestion.
http://www.elinux.org/Beagleboard:BeagleBoneBlack#Terms_of_Use
That is why our plan is to increase capacity by being able to pay
additional CMs to build the boards for us while still having the control
over the whole process. The goal here is to find the
We have that already, Adafruit limits purchases to 1 per order. Check daily
for when they have stock and order then. When they run out, wait until they
come back in stock to order more
Gerald
On Mon, Mar 17, 2014 at 5:09 PM, Venkat Bommakanti achar...@gmail.comwrote:
On Monday, March 17, 2014
You have a response form the RMA team.
Gerald
On Sun, Mar 16, 2014 at 2:37 PM, danie...@umbc.edu wrote:
I have an unresponsive BBB as well, I submitted an RMA and am waiting for
a response. But is there a way to recover the contents of the eMMC after
the board goes dead?
--
For more
It is not a bootable device that a PC boots from. It does not need a PC to
boot. It is a stand alone board intended to be a Linux PC, with a monitor,
keyboard, and mouse. It can look like a USB drive on a PC, but that is
about it.
Gerald
On Sun, Mar 16, 2014 at 4:37 PM,
So if the board never works again, have you sent it in for repair via an
RMA?
Gerald
On Fri, Mar 14, 2014 at 10:28 AM, atomik...@gmail.com wrote:
The BeagleBone Black ethernet interface will fail after a few hours of
operation. As an example, we did a fresh install of both Debian and Ubuntu
So it is not a hard HW failure then. You may find this conversation useful.
Start at the top.
https://groups.google.com/forum/#!searchin/beagleboard/ethernet$20address/beagleboard/9mctrG26Mc8/09EatsZon40J
Gerald
On Fri, Mar 14, 2014 at 11:12 AM, atomik...@gmail.com wrote:
This is not an
There in people's products.
Gerald
On Thu, Mar 13, 2014 at 3:58 AM, Satz Klauer satzkla...@googlemail.comwrote:
On Wed, Mar 12, 2014 at 3:08 PM, David Funk dwf...@gmail.com wrote:
and then the boards would not be available for it's intended market.
Hm...where is the difference to current
If you cut power, the processor turns off so it is hard for it to keep
running and print logs without power.
Hook a meter to the DC input and see if it turns off. If it does, the 7805
is shutting down. The best that can do is 500mA without a heat sink,.
Gerald
On Thu, Mar 13, 2014 at 4:40 AM,
If you copy it exactly and build it correctly it should work. People do
this all the time. I would expect SW to have to be added to support
whatever you put on the board to fit your application.
There is no SW loaded onto the SOC. All code for the SOC is loaded from an
external source, eMMC or SD
Yes it does sound vague. I would hook a scope to the power and see what it
does in the reset scenario. What is your current capacity of your power
source?
If the power pin is held down too long, it will result in a power cycle and
not a shutdown.
Gerald
On Thu, Mar 13, 2014 at 9:57 AM,
Nothing the PMIC can do once it is gone. There isn't enough capacity in the
caps t keep a board running.
9V is better than 15V.
Gerald
On Thu, Mar 13, 2014 at 3:24 PM, c...@isbd.net wrote:
Gerald Coley ger...@beagleboard.org wrote:
[-- text/plain, encoding quoted-printable, charset: ISO
Yes I know. It is the way I designed the board. I do not see it as an
issue. It is designed to limit the current. You are free to change it if
you like as long as you don't expect any RMA support on the board.
Gerald
On Wed, Mar 12, 2014 at 1:58 AM, suteerth tripathi
From the schematic you can see that thi spin is used as th eclock input for
the HDMI. Please read the note.
Gerald
:
[image: Inline image 1]
On Wed, Mar 12, 2014 at 11:24 AM, Bit Pusher ken.w.mar...@gmail.com wrote:
BBB Ubuntu 3.8.13-bone28 cross compiled from Robert Nelson's source
I
purpose
On Tue, Mar 11, 2014 at 12:09 PM, Gerald Coley ger...@beagleboard.orgwrote:
It is not a fuse. It is a PTC. That is why on the Wiki we recommend an
externally powered converter. The 5V comes from the power supply in the
wall, so there is no regulator on the board to overload.
We decided
It is loaded by default. It is the clock for the HDMI Audio. From a HW
standpoint to use that pin as a GPIO pin, you have to disable the clock
oscillator and reconfigure the pin usage for GPIO. From a SW standpoint
you may have to disconnect the HDMI. Not sure if Audio can be
killed separately or
Yes. They have the same connectors. They have the same polarity. And they
are both 5Vr. Now, as there is no official XM power supply, you need to
make sure the one you bought has the right amount of current for you
application.
Gerald
On Mon, Mar 10, 2014 at 10:35 PM, madjac...@gmail.com
Correct. You can also solve the issue by using the correct SW as well. The
issue is that the processors interferes with the default address settings
when the PHY reads the pins. If the SW looks for the other addresses, it
works fine.
Also, removing these caps will also create issues where the
You will need an adapter.
Gerald
On Tue, Mar 11, 2014 at 5:59 AM, Elavarasu elavarasu@gmail.com wrote:
Hi,
Is there is anyway to use the Embest XDS 100v2 14 pin jtag for the
beaglebone black,
i referred the difference for the 20pin and 14pin here:
My SW guy is currently out. There is a change that needs to be made. I will
get with him next week to make sure the change gets done.
Gerald
On Tue, Mar 11, 2014 at 8:26 AM, Robert Kuhn rob...@ku.hn wrote:
Gerald:
Correct. You can also solve the issue by using the correct SW as well.
The
It is not a fuse. It is a PTC. That is why on the Wiki we recommend an
externally powered converter. The 5V comes from the power supply in the
wall, so there is no regulator on the board to overload.
We decided to meet the HDMI specification, so that is the reason for the
current limit.
Gerald
The base address of the PHY. Only one address per PHY. I believe it is 0 to
7. It is my understanding that the fix was pushed up a week ago. Robert's
image should handle this.
It is not the MAC address. PHY NOT FOUND means that at the one address of
00 the PHY did not respond because the PHY has
I know what I have seen. I know what I have replicated. And I know the SW
fix takes care of it.
I also know it does not happen on every board and doe snot happen every
time. Do keep in mind that the board reset is not a HW reset. It is a SW
reset.
The fix is in the latest image from Robert.
It is real. But, if you wait until you see it in stock, it may be a while
before you will get one.
Gerald
On Mon, Mar 10, 2014 at 6:41 AM, Satz Klauer satzkla...@googlemail.comwrote:
Am Donnerstag, 27. Februar 2014 15:54:05 UTC+1 schrieb Giuseppe Iellamo:
Just to say
our order on RS
This is the correct place to ask..
Gerald
On Mon, Mar 10, 2014 at 5:15 AM, Julian David Rath julian.r...@gmail.comwrote:
Hi,
I just found out that this is a better place to ask my question, it seams
like there is also a beaglebone Google group, little confusing. So here my
cross-post:
What are the terminal settings you are using?
Gerald
On Sat, Mar 8, 2014 at 5:08 AM, roshan sebastian roshan4...@gmail.comwrote:
Hi, I`ve bought a Beagle Board-xM recently..It`s working fine, except
that, in the terminal there is some gibberish,some sort of random symbols
which we can`t
users
will move to other platforms and in a couple of month we will see plenty
of boards on stock
but no demand. it is an old story but it seems some lessons are never
learned.
*From:* beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com]
*On Behalf Of *Gerald Coley
*Sent
and making it up in volume, and it's
not a fun place to be.
Please keep us posted!
On 3/10/2014 9:15 AM, Gerald Coley wrote:
We cannot increase supply. We are maxed out. Why? Well, because we can't
find another CM that will make the board for no profit. SO, unless
we increase the price we
Actually most shops do. That is why we can never catch up.;
Gerald
On Mon, Mar 10, 2014 at 9:40 AM, Satz Klauer satzkla...@googlemail.comwrote:
On Mon, Mar 10, 2014 at 2:53 PM, Gerald Coley ger...@beagleboard.org
wrote:
It is real. But, if you wait until you see it in stock, it may
Are you holding S2 pressed until after the board powers up?
Gerald
On Fri, Mar 7, 2014 at 6:21 AM, Sam Hon samhonboo...@gmail.com wrote:
I tried to update the latest version Debian in
http://beagleboard.org/latest-images/
Download BeagleBone Black (eMMC flasher) Debian (BeagleBone
You are fine. Reset is no the issue. Power is. The fact that the power is
removed makes everything safe. Reset is an easy way to make sure
the board is powered up and provides a logic level indication of that fact..
Gerald
On Fri, Mar 7, 2014 at 12:47 AM, k...@cranehome.info wrote:
On a
From a HW standpoint, all this information is found in the Technical
Reference Manual for the AM3358 processor.
http://www.ti.com/product/am3358
Gerald
On Thu, Mar 6, 2014 at 3:56 AM, c...@isbd.net wrote:
I'm trying to understand how to *use* the tables in the BBB manual
that how the
I put that in there for a reason. It may not happen all the time, but
eventually you could blow up the processor.
Gerald
On Thu, Mar 6, 2014 at 8:56 AM, Matthew Witherwax ablec...@gmail.comwrote:
As part of the Control of Mobile Robotics class offered through Cousera,
the students are
That is taken care of by the device tree file.
Gerald
On Thu, Mar 6, 2014 at 8:57 AM, c...@isbd.net wrote:
Gerald Coley ger...@beagleboard.org wrote:
[-- text/plain, encoding quoted-printable, charset: ISO-8859-1, 54 lines
--]
From a HW standpoint, all this information is found
you see any issue with powering the sensors via a voltage regulator like
http://www.pololu.com/product/2098 that can be turned on via a pin on the
BBB once it is up and running?
On Thu, Mar 6, 2014 at 8:58 AM, Gerald Coley ger...@beagleboard.orgwrote:
I put that in there for a reason. It may
, Gerald Coley ger...@beagleboard.orgwrote:
Yes you can do that Use the 3.3V to enable the regulators.
Gerald
On Thu, Mar 6, 2014 at 9:03 AM, Matthew Witherwax ablec...@gmail.comwrote:
Thanks Gerald. That is exactly the response I was expecting and exactly
the feeling I had. Never really
That is my secret. I don't need coffee! The inside story is that I am
always here. I have no life!
Gerald
On Thu, Mar 6, 2014 at 9:25 AM, Eric Palmer e...@ericfpalmer.com wrote:
Yes I get that.
On Thu, Mar 6, 2014 at 10:14 AM, Gerald Coley ger...@beagleboard.orgwrote:
I am not sure how
On Thu, Mar 6, 2014 at 9:30 AM, c...@isbd.net wrote:
Gerald Coley ger...@beagleboard.org wrote:
[-- text/plain, encoding quoted-printable, charset: ISO-8859-1, 46 lines
--]
That is taken care of by the device tree file.
Ah, yes, makes sense now. That gets 'written' at boot time and sets
Cost. That is what a $45 board allows us to buy. 4G is more expensive than
2G, And eMMC is faster and more reliable than an SD card.
Gerald
On Thu, Mar 6, 2014 at 9:49 AM, Brad Hopper brad.hop...@gmail.com wrote:
I wonder why the BBB has only 2G of space in the eMMC - aren't most
small
Yes. It is called the debug port. Connector J1.
http://www.elinux.org/Beagleboard:BeagleBone_Black_Serial
Gerald
On Thu, Mar 6, 2014 at 9:45 AM, Brad Hopper brad.hop...@gmail.com wrote:
Folks,
It seems to take a while for the BBB to boot. I'm going to check out the
newly posted Debian
, 2014 at 10:14 AM, Gerald Coley
ger...@beagleboard.orgwrote:
I am not sure how to take that!Not sure if it is luck
or something else.
Gerald
On Thu, Mar 6, 2014 at 9:12 AM, Eric Palmer er...@ericfpalmer.comwrote:
Awesome
Gerald we are lucky to have you on this mail list
It won't damage the hardware. It may not work, but you can always put it
back the way you got it.
Gerald
On Thu, Mar 6, 2014 at 4:31 PM, mingzhao.l...@gmail.com wrote:
I just got my first BBB and try to study u-boot on it. I just wonder
whether or not some bad assembly code in charge of
are dropping 6.7V across the regulator.
Gerald
On Wed, Mar 5, 2014 at 8:57 AM, Dorian Levy dorianal...@gmail.com wrote:
On Mar 4, 2014 7:42 PM, Gerald Coley ger...@beagleboard.org wrote:
Can you share a schematic with me? I can't visualize what you are doing.
Gerald
On Tue, Mar 4, 2014
Are you using a heatsink? Voltage?
Gerald
On Wed, Mar 5, 2014 at 10:07 AM, Dorian Levy dorianal...@gmail.com wrote:
Addicore 5V 1.5A Positive Voltage Regulator L7805CV
On Wed, Mar 5, 2014 at 10:52 AM, Gerald Coley ger...@beagleboard.orgwrote:
That particular regulator can have different
OK. Then what you are describing as your issue, i would expect to happen.
Gerald
On Wed, Mar 5, 2014 at 12:37 PM, Dorian Levy dorianal...@gmail.com wrote:
No heatsink 5V
On Mar 5, 2014 11:13 AM, Gerald Coley ger...@beagleboard.org wrote:
Are you using a heatsink? Voltage?
Gerald
at 1:02 PM, Dorian Levy dorianal...@gmail.com wrote:
Because the IC can't provide the required current without a heat sink? Or
because the BBB is going into thermal protection? A little insight into why
you would expect that would be appreciated.
On Mar 5, 2014 1:43 PM, Gerald Coley ger
because it can take up to 25V, but
I'll try a heat sink and see if that helps.
On Wed, Mar 5, 2014 at 2:05 PM, Gerald Coley ger...@beagleboard.orgwrote:
Because the regulator is going into thermal limit due to excessive heat
dissipation. Make the 11.7V supply say 8V and it will run longer
The PMIC is sensitive to slow ramping power supplies. A 10uF capacitor is
also a little small. You could be seeing a dip in the voltage when the PMIC
does kick in and it could in some instances cause it to shutdown.
Gerald
On Wed, Mar 5, 2014 at 2:16 PM, edwin.j@gmail.com wrote:
Using
Check the datasheet. The pull up may or may not be small enough depending
on what it has to pull up. The current is the max the pin can do. In other
words, that is who large the pull up actually is. Turning on all the weak
pullups isn't going to strain the total current of the power supply which
Can you share a schematic with me? I can't visualize what you are doing.
Gerald
On Tue, Mar 4, 2014 at 5:05 PM, Dorian Levy dorianal...@gmail.com wrote:
I am building a robot that uses an 11.7V battery. I tried attaching a 5V
regulator to the T5(+)/T8(-) (pins with the T6(SENSE) bridged to
Here is how to reflash the eMMC to factory condition.
http://www.elinux.org/Beagleboard:Updating_The_Software
Here is the link to the support Wiki.
http://www.elinux.org/Beagleboard:BeagleBoneBlack
Gerald
On Tue, Mar 4, 2014 at 8:12 PM, brad.hop...@gmail.com wrote:
Hey folks, first time
http://www.elinux.org/Beagleboard:Updating_The_Software
Gerald
On Mon, Mar 3, 2014 at 5:08 AM, Vikas Gaikwad vksgaikw...@gmail.com wrote:
Hi friends,
This is Vikas here I am facing problem with my beaglebone black its
not booting but all the three USER LEDs 1,2 and 3 are
Processors today use pin muxing. The 2nd and 3rd are not meanings. They are
the available options to be routed to those pins by setting a register in
the processor. As long as you sue a function that is listed, you should
have no problem. In other words, do not use a pin for UART1 that does not
The board can be powered by USB or 5VDC external power supply. But not both
at the same time.
Gerald
On Sun, Mar 2, 2014 at 8:59 AM, Andrew Dai the...@andrewdai.co wrote:
I might be wrong but I think you should use the USB port for peripherals
... get a (powered) USB hub for keyboard/mouse
As is indicated in the System Reference Manual, you can use the LCD pins as
GPIO pins. Provided, you don't interfere with their settings during power
up as they are also the boot pins.
Gerald
On Sun, Mar 2, 2014 at 1:32 PM, mharris...@gmail.com wrote:
Hi,
I would like to configure BBB P8
That is up to you if you want to rip parts off. I am not recommending it.
Gerald
On Fri, Feb 28, 2014 at 12:33 AM, chandle...@gmail.com wrote:
Should C24 and C30 be removed from A5A BBBs that begin experencing strange
Ethernet problems?
I have two A5As that have both decided to keep their
Redesigned board will be a lot more expensive. Unless of course you are
building and ordering parts in blocks of 100,000 units.
Also, 2gb DDR3 does not exist. You may be able to do SDRAM, but again
quantity is the key to all of this.
A cape, that may be the way to go.
Gerald
On Fri, Feb 28,
There is only one USB interface on the processor. USB is a point to point
interface.
The connector on the Jameco site is a dual USB connector supporting
two separate independent USB interface. It will not work.
The processor only has one USB interface,
The only way to do what you want is to use
BBB does not ship with HW support for OTG.
Gerald
On Fri, Feb 28, 2014 at 6:28 PM, Daniel Delgado Terán warm...@gmail.comwrote:
I'm currently having a lot of problems here. If I use Andrew's pre-built
image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no
support to
26 week times is not true. That is what the computer systems spits out to
show when the WHOLE PO is filled!
We are shipping daily as you can clearly see!!
Gerald
On Wed, Feb 26, 2014 at 11:53 PM, Venkat Bommakanti achar...@gmail.comwrote:
Just got an email alert - 26 week backorder time !
http://www.elinux.org/Beagleboard:BeagleBoneBlack
Gerald
On Thu, Feb 27, 2014 at 2:47 AM, Benke László benkelac...@gmail.com wrote:
Hi!
I am Laszlo Benke, from Hungary, Budapest. I would like to participate in
GSOC 2014. My mayor is electrical engineer (M.Sc.). I design basic
circuits, I
, 2014 at 7:47 PM, Gerald Coley ger...@beagleboard.orgwrote:
26 week times is not true. That is what the computer systems spits out to
show when the WHOLE PO is filled!
We are shipping daily as you can clearly see!!
Gerald
On Wed, Feb 26, 2014 at 11:53 PM, Venkat Bommakanti
achar
The factory image does enable HDMI by default. Sounds like it does not like
your monitor.
http://www.elinux.org/Beagleboard:BeagleBoneBlack_HDMI
For flashing questions
http://www.elinux.org/Beagleboard:Updating_The_Software
Gerald
On Thu, Feb 27, 2014 at 10:25 AM, walter harms wha...@bfs.de
It comes from the TPS65217C. Just check the schematic.
Gerald
On Wed, Feb 26, 2014 at 7:42 AM, c...@isbd.net wrote:
Is the VADC pin on P9 fed from the TPS65217C power controller - either
the VDD_1V8 rail or the VRTC rail? If it doesn't come from one of
these where does it come from?
--
DNI means there is nothing there. No connection at all.
As to the other questions, you might try contacting the supplier of
the board and the folks that designed it.
Gerald
On Tue, Feb 25, 2014 at 11:42 PM, markusbrow...@gmail.com wrote:
Hi All,
I plan on creating a customer version of
It cannot. You would need to modify UBoot to ignore the EEPROM.
Gerald
On Wed, Feb 26, 2014 at 5:24 AM, ymc123...@gmail.com wrote:
I have already follow
http://eewiki.net/display/linuxonarm/BeagleBone#BeagleBone-LinuxKernelboot
the bone.
I find there is an eeprom on the board, after some
and
anticipated date.
On Tue, Feb 25, 2014 at 1:21 AM, Gerald Coley ger...@beagleboard.orgwrote:
We are already working on all of this. Plan is in place.
Gerald
On Mon, Feb 24, 2014 at 1:44 PM, rh_ richard_hubb...@lavabit.com wrote:
On Mon, 24 Feb 2014 07:53:37 -0600
Gerald Coley ger
A schematic would be helpful/ You can send to to me direct if you like.
Craters are definitely not good. It does sound like a IO stress issue. The
LED acting the way it sounds means the PMIC is seeing excess current and
shutting down.
Gerald
On Wed, Feb 26, 2014 at 8:48 AM,
PDF works great. Just search on the signal name and use the zoom function.
Gerald
On Wed, Feb 26, 2014 at 8:58 AM, c...@isbd.net wrote:
Gerald Coley ger...@beagleboard.org wrote:
[-- text/plain, encoding quoted-printable, charset: ISO-8859-1, 35 lines
--]
Gerald
On Wed, Feb 26
Well. Uh. I have no idea what your design looks like. But, the code you are
using looks for the EEPROM. Do you have one? If you do. is it programmed?
Gerald
On Wed, Feb 26, 2014 at 9:25 AM, lee.s...@bibby-scientific.com wrote:
I can now confirm that my PCB supplier has now successfully
There is not an easy or even a hard way to override the current detection
in the PMIC.. Most likely the processor has been popped. Your best bet is
an RMA.
Gerald
On Wed, Feb 26, 2014 at 10:19 AM, Pariyan Shah pariyans...@gmail.comwrote:
Hi, I am using Beaglebone black. It does not boot if I
Did you look at the System Reference Manual? Yes, it can boot from the SD
if you remove the eMMC.
Gerald
On Wed, Feb 26, 2014 at 10:15 AM, lee.s...@bibby-scientific.com wrote:
My design is a cut down version of BBB. The HDMI IC is not fitted and the
eMMC is not fitted.
Will the BBB boot
Might I suggest that you register so your posts go through sooner?
I suggest read the System Reference Manual. Yes you can remove the eMMC and
boot from SD providing you did not mess up the boot pins..
Gerald
On Wed, Feb 26, 2014 at 10:27 AM, lee.s...@bibby-scientific.com wrote:
I have now
No. You only option is an RMA.
Gerald
On Wed, Feb 26, 2014 at 10:35 AM, Pariyan Shah pariyans...@gmail.comwrote:
Hi, I am using Beaglebone black. It does not boot if I power it up using
the miniUSB or adapter. The power led just flashes for a moment and then it
goes off. If I press the
Sure. Just do the RMA thing.
Gerald
On Wed, Feb 26, 2014 at 12:10 PM, R. Lemos rsle...@gmail.com wrote:
Accidentally I've shorted the 1.8V pin (on expansion header) to ground
pin. The board stopped working immediately (audio play was going on and was
suddenly cut). I quickly (about 2 sec)
We can replace the PMIC which should fix the issue. You would need to
request an RMA.
http://www.elinux.org/Beagleboard:BeagleBoneBlack
Gerald
On Wed, Feb 26, 2014 at 1:51 PM, danielp...@gmail.com wrote:
Hi, I accidentally connected the 5V jack with the outside positive. Now
I've changed
You can contact me direct.
Gerald
On Tue, Feb 25, 2014 at 10:49 AM, Joey Wilson doughywil...@gmail.comwrote:
Gerald,
Thanks for your reply. What is the best way to contact you directly? Is
there a phone number I could give you a quick call?
Thank you,
Joey
On Thursday, February 20,
I have never used that utility. So, I have no file.
Gerald
On Mon, Feb 24, 2014 at 7:06 AM, Jason Kridner jkrid...@beagleboard.orgwrote:
On Mon, Feb 24, 2014 at 2:18 AM, John Tobias john.tobias...@gmail.comwrote:
Hi Gerald,
I was trying to find the PinMux Utility .dat file for the BBB
The framer does not set the resolution. It is all a function of the kernel
and the DRM interface..
Gerald
On Sun, Feb 23, 2014 at 9:43 PM, William Hermans yyrk...@gmail.com wrote:
Nick,
To disable teh HDMI audio you would do that via uEnv.txt on the boot
partition.
In the file you add .
through it as quickly as we can. It is going
to take time. All the tricks are being employed to get boards out..
Gerald
On Sun, Feb 23, 2014 at 9:57 PM, rh_ richard_hubb...@lavabit.com wrote:
On Fri, 21 Feb 2014 18:33:12 -0600
Gerald Coley ger...@beagleboard.org wrote:
eMMC for one
There is only one interface, so whatever you send to one is sent to the
other. The issue would be to find a resolution and timing that both the LCD
and the monitor would like. That will be tough to do.
Gerald
On Mon, Feb 24, 2014 at 7:53 AM, sana sanatanama...@gmail.com wrote:
Hi,
I am
understand
40,000 units/week of the latter are being produced in the UK alone. I hope
your plan includes the ability to produce 20,000 to 40,000 units/week.
Best to do it right once.
Anil
On Mon, Feb 24, 2014 at 7:23 PM, Gerald Coley ger...@beagleboard.orgwrote:
Replacing with a larger part
No voltage can be applied to any pin when the board is not powered. Looking
at your schematic, I would say that it is designed to blow up the processor
unless the 12V supply come sup after the 3,3V and goes down before the 3.3V
rail..
Gerald
On Mon, Feb 24, 2014 at 9:00 AM, Andrey
1201 - 1300 of 1755 matches
Mail list logo