[beagleboard] Re: Debian Stretch + Kernel arm 4.4.76-bone-rt-r18 - missing insserv

Thanks Robert On Saturday, 8 July 2017 09:16:50 UTC+1, Moscowbob wrote: > > Hi All, > > I have just followed the instructions for building kernel + sgx modules > and the sgx drivers were not installed after reboot. > Going through the /opt/gfxinstall/sgx-install.sh script I f

[beagleboard] Debian Stretch + Kernel arm 4.4.76-bone-rt-r18 - missing insserv

Hi All, I have just followed the instructions for building kernel + sgx modules and the sgx drivers were not installed after reboot. Going through the /opt/gfxinstall/sgx-install.sh script I found that /sbin/insserv was not installed. After installing the package and reboot all is fine. Can

[beagleboard] Re: Kernel 4.4.31-bone-rt-r14 sgx-startup.sh - not setting permissions

ot;video", MODE="0660". I am not sure, maybe somebody can clarify - I think the chmod 666 /dev/pvrsrvkm has no effect since when modprobe is called, kernel and udev events will trigger and the default permissions for udev on devices is 600. Regards Rob On Tuesday, 29 Novembe

[beagleboard] Re: Kernel 4.4.31-bone-rt-r14 sgx-startup.sh - not setting permissions

7 November 2016 21:59:06 UTC, Moscowbob wrote: > > > I have just built fresh kernel, dtb, u-boot and sgx as per RCN eewiki > <https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-LinuxKernel> > and > I have also built Qt 5.6.2. > Everything is working cor

Re: [beagleboard] Kernel 4.4.31-bone-rt-r14 sgx-startup.sh - not setting permissions

root root 247, 0 Nov 28 07:37 /dev/pvrsrvkm but still the permissions are 600 as can be seen above. Any advice will be greatly appreciated. Thanks Rob On Sunday, 27 November 2016 23:16:25 UTC, Moscowbob wrote: > > Thank you Robert but I am not sure what you mean, would you kindly > clari

Re: [beagleboard] Kernel 4.4.31-bone-rt-r14 sgx-startup.sh - not setting permissions

On Sunday, 27 November 2016 22:03:50 UTC, RobertCNelson wrote: > > On Sun, Nov 27, 2016 at 3:59 PM, Moscowbob <mosc...@gmail.com > > wrote: > > > > I have just built fresh kernel, dtb, u-boot and sgx as per RCN eewiki > and I > > have also built Qt 5.6.2.

[beagleboard] Kernel 4.4.31-bone-rt-r14 sgx-startup.sh - not setting permissions

I have just built fresh kernel, dtb, u-boot and sgx as per RCN eewiki and I have also built Qt 5.6.2. Everything is working correctly except for one problem which I do not understand and hope somebody could

[beagleboard] Serial MARK/SPACE parity - Timing

Greetings All, I would appreciate some advice on the following problem- I need to communicate with and industrial device using the "9th bit high" protocol, which means the address byte is sent with parity set to mark and all other bytes sent with parity set to space. I have implemented this and

Re: [beagleboard] Re: Correct way t grant user permission to /dev/fb0 and /dev/input/event1

to a group in this case seems like the real way to go. So preferable if you can nail down this issue. On Thu, Aug 6, 2015 at 1:18 PM, Moscowbob mosc...@gmail.com javascript: wrote: Thanks for the replies gents I have opted for Barry's suggestion and just added the user to input group for /dev

Re: [beagleboard] nfs boot - no ssh keys

wrote: On Mon, Aug 3, 2015 at 4:05 AM, Moscowbob mosc...@gmail.com javascript: wrote: Hello, My network boot and nfs are all working but I cannot ssh into the BBB. Looking in /etc/ssh there are no ssh_host* files - there are a few files and a ssh_regenerate. Rootfs

Re: [beagleboard] nfs boot - no ssh keys

Decided to update and rebuild - saw you already changed it :) Busy building now - thanks On Monday, 3 August 2015 17:09:45 UTC+1, RobertCNelson wrote: On Mon, Aug 3, 2015 at 11:04 AM, Robert Nelson robert...@gmail.com javascript: wrote: On Mon, Aug 3, 2015 at 10:57 AM, Moscowbob mosc

[beagleboard] Correct way t grant user permission to /dev/fb0 and /dev/input/event1

I have cross compiled QT 5.5.0 for the BBB with debian jessie rootfs and 3.14-ti kernel (both latest) I can run examples using eglfs but need to do so using sudo. I would like to run these directly from the default debian user. My questions are: 1. What is the correct method of granting access

[beagleboard] nfs boot - no ssh keys

Hello, My network boot and nfs are all working but I cannot ssh into the BBB. Looking in /etc/ssh there are no ssh_host* files - there are a few files and a ssh_regenerate. Rootfs: ./RootStock-NG.sh -c eewiki_minfs_debian_jessie_armhf kernel: kernel_version=3.14.48-ti-r72 /etc/fstab debugfs

Re: [beagleboard] Jesse lxqt, 4.3 CAP lcd - Incorrect mouse cursor

AM, Moscowbob mosc...@gmail.com javascript: wrote: Hello All I am need of some help with getting the touch screen working correctly with the below configuration BBB Rev C Custom Cape with Newhaven 4.3 capactive touch screen Image: BBB-eMMC-flasher-debian-jessie-lxqt-armhf

[beagleboard] Jesse lxqt, 4.3 CAP lcd - Incorrect mouse cursor

Hello All I am need of some help with getting the touch screen working correctly with the below configuration BBB Rev C Custom Cape with Newhaven 4.3 capactive touch screen Image: BBB-eMMC-flasher-debian-jessie-lxqt-armhf-2014-11-19-2gb.img Kernel: 3.14.26-ti-r41 The system boots up and the

Re: [beagleboard] optargs in kernel 3.15.10-bone8

@William - After reading RCN explanation that different locations are searched, this crossed my mind and I deleted all uEnv.txt files everywhere except for the sd card fat partition, but this still does not work if I add either cmdline=quiet init=/lib/systemd/systemd consoleblank=0 OR

Re: [beagleboard] optargs in kernel 3.15.10-bone8

Thanks Robert, that clears up things for me now On Tuesday, 9 September 2014 15:28:20 UTC+1, RobertCNelson wrote: On Tue, Sep 9, 2014 at 9:13 AM, Moscowbob mosc...@gmail.com javascript: wrote: @William - After reading RCN explanation that different locations are searched, this crossed

[beagleboard] Re: optargs in kernel 3.15.10-bone8

--- uname_r=3.15.10-bone8 cmdline=quiet init=/lib/systemd/systemd *#cmdline=quiet init=/lib/systemd/systemd consoleblank=0 === DOES NOT WORK* Thanks Rob On Monday, 8 September 2014 01:15:14 UTC+1, Moscowbob wrote: BBB boot from tftp and nfs

Re: [beagleboard] Re: optargs in kernel 3.15.10-bone8

Sorry - there is a typo.. .the display is now not blanking, after adding the optargs to uEnv.txt in the fat boot partition but for learning sake, I would like to know how to achieve this in the /boot/uEnv.txt On Monday, 8 September 2014 11:08:35 UTC+1, Moscowbob wrote: Thanks William

Re: [beagleboard] optargs in kernel 3.15.10-bone8

: On Sun, Sep 7, 2014 at 7:15 PM, Moscowbob mosc...@gmail.com javascript: wrote: BBB boot from tftp and nfs - kernel: 3.15.10-bone8 rootfs: debian-jessie-console-armhf-2014-08-13 Hardware: BBB A5C Circuitco LCD4 cape Circuitco RS232 cape So to achieve this with a kernel

[beagleboard] optargs in kernel 3.15.10-bone8

BBB boot from tftp and nfs - kernel: 3.15.10-bone8 rootfs: debian-jessie-console-armhf-2014-08-13 Hardware: BBB A5C Circuitco LCD4 cape Circuitco RS232 cape /home/rob/rootfs/boot/uEnv.txt uname_r=3.15.10-bone8 cmdline=quiet init=/lib/systemd/systemd *optargs=consoleblank=0*. I used this

Re: [beagleboard] Re: Enable LCD4 adding .dts to Kernel source v3.1x ?

Hi All, It works fine with Robert's 3.15 kernel. However, the lcd4 is very dim - how do you adjust the brightness? Lcd also works with 3.16 and 3.17 kernels but omaplfb does not load Thanks Rob On Tuesday, 19 August 2014 21:06:22 UTC+1, Cedric Malitte wrote: Hi, Kernel changes should

Re: [beagleboard] Circuitco LCD4 - Kernel 3.12, 3.13

On Tuesday, 1 April 2014 14:36:27 UTC+1, RobertCNelson wrote: On Tue, Apr 1, 2014 at 7:02 AM, Moscowbob mosc...@gmail.com javascript: wrote: First of all, thank you to all who share their knowledge and experience, without you guys us newbies will have a hard time learning. I have

[beagleboard] Circuitco LCD4 - Kernel 3.12, 3.13

First of all, thank you to all who share their knowledge and experience, without you guys us newbies will have a hard time learning. I have been playing around with various kernels and just in general getting familiar with Linux and the BBB in general. I managed to build QT 4.8.5 with RCN