i tried to configure dsp in cme to register with itself instead of CM, but no
successful
when i do show sccp:
Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED
output:
VG2821#sh sccp
SCCP Admin State: UP
Gateway IP Address: 10.65.20.23, Port Number: 2000
IP
it is working now. i missed out the sdspfarm command
thanks edward for your help
now is the output again
SCCP Admin State: UP
Gateway IP Address: 10.65.20.23, Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.65.20.23, Port Number: 2000
Priority: 1,
You would add something like:
telephony-service
sdspfarm units 1
sdspfarm transcode sess 6
sdspfarm tag cmexcoder (or you may need to change your profile to
mtp, where is the mac of the g0/0. you would then use
mtp instead of cmexcoder. I depends on the IOS
The commands under telephony-service are missing:
Try:
telephony-service
sdspfarm units 1
sdspfarm transcode sessions 6
sdspfarm tag 1 cmexcoder
Gustavo Sánchez
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Viernes, 07 de Marzo de
Guys,
What is the sequence of call hits to/from CCM?
Note: application dialplan rules is under CCMRoutePlanApplication-dialplan
rules
Situation1: Call from CCM to PSTN
dialed-digit--RoutePatternTranslation-PatternapplicationDialPlanRule
Q1:
Best advise I can give you is check out Dialed Number analyzer
I do not know if there is a document that explains this but DNA should give
you the answer.
On Fri, Mar 7, 2008 at 9:51 AM, DSCP46EF [EMAIL PROTECTED] wrote:
Guys,
What is the sequence of call hits to/from CCM?
Note:
The configuration of significant digits are only applicable to inbound calls.
It tells the voice gateway / trunk how many digits should be sent to CM for
analyzing. For example, if your PSTN is sending 10 digits inward to your voice
gateway and you are using only 4 digits to ring an
So I have decided not to use dialplan pattern on the CME/CUE box.
Can somebody confirm if I will be missing anything else besides the
following?
full 10 digit caller-id going out.
incoming 10 digit to 4-digit extension translation.
Thanks in advance.
I think you are looking at this wrong.
There is no order of priority, translation-pattern, versus
route-pattern, versus hunt-pilot, versus directory-number (this isn't
BGP)...
What there is is Calling Search Spaces and Partitions and something
called 'urgent priority'...
Or a better way to say