Post your configs please
On 3/10/10, Mike Peterson polobi...@yahoo.com wrote:
Hi all,
I am working on LAB 4 A/B and I am having GK registration issuesand my GK
couldn't register as well in
the debugs (debug RAS and debug h225 ans1...) there is no reference about
this gateway trying to
3. Lab 4 AB GK registration problem
Do you have a dial peer configured?
Regards,
Rohan
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent: Wednesday, March 10, 2010
Just curious if there are any rumors to the new VOD shipping today based
on the website date of no later than March 10th. Has anyone seen/heard
anything?
___
For more information regarding industry leading CCIE Lab training, please visit
Hello,
I hope it start shipping.
Also i will like to confirm if those of us that bought the one recorded by
Mark Snow will get this too (CCIE Voice 3.0 Video on Demand Course
Accompanying Slide and Topology Books)
On Wed, Mar 10, 2010 at 4:26 PM, Steve Sarrick ssarr...@drsllc.net wrote:
Just
A meeting with a customer led to a discussion about their AD structure.
They have Unity 4.0.5 still in place and are going to move to Unity 7 or UC
in the near future. The question on the AD structure brought out that they
were in the midst of upgrading now. Even Unity 7 is not supported on a
Support doesn't mean it will or won't work. Just get Cisco to certify
it since it'll have to be done sooner or later.
On Wed, Mar 10, 2010 at 10:03 AM, Michael Thompson
mthompson...@gmail.com wrote:
A meeting with a customer led to a discussion about their AD structure.
They have Unity 4.0.5
Hi All,
Thank you for your help in advance. Please see attached the HQ and BR2-RTR
partial config. The GK doesn't register even though I have IP connectivity with
CCM/HQ/BR2-RTR! I also fallow a troubleshooting doc from Cisco :
Hi CCIETalk,
Thanks for your help and quick replay.
Please see attached the partial configs from HQ and BR2-RTR .
Yes , I do have the gateway command into gw.
The GK doesn't register even though I have IP connectivity with
CCM/HQ/BR2-RTR! I also fallow a good troubleshooting doc from Cisco :
Dear All,
I have CUCM 7, CU7, CUCCX 7 running on VM ware.
My qeustions is how to reset all its setting to initial setup without having
any config ?
Also if possible how to make a backup from a certain config on each server.
Sorry for simple qeustions but i am new to vmware world and a friend
Hello:
I was configurin MLPoFR and LFI on a link between hq and br1, on the serial
interface I had:
interface Serial0/2/0.202 point-to-point
ip rsvp bandwidth 64
Calls where progressing as configured (two g729 calls)
Then after apply auto qos voip trust fr-atm new virtual
Wael,
After you do a fresh install, take a snapshot in VMWare. Then you can
always revert back to the snapshot without having to un-configure
everything you have done.
In VMWare you can normally only have 1 snapshot, unless you have one of
the more advanced versions, so for all other
Hello:
At the gw you have:
h323-gateway voip id PL ipaddr 192.21.64.254 1719
So at the gk you may have:
zone local PL cisco.com 192.21.64.254
Becouse it is the gk signaling address that you are specifying
Let us know
Date: Wed, 10 Mar 2010 09:56:03 -0800
From:
I am afraid you won't be able to do it unless you
have taken a snapshot of your VM machine after installation. This way
you can revert back to old image.
The only other way I can think of is by deleting manually all the cucm
configs which is pretty hectic considering the fact cucm won't allow
Thank you, was working through this same problem in Volume 2 Lab 2. The
gatekeeper syntax in the Proctor Guide is missing the IP address, I'm
assuming is needed because HQ router is also an H323 gateway. The BR2
router could register when I specified the loopback on HQ but not the
subinterface.
from what I understand...for the low, low cost of $50 (plus shipping), you
will get this DVD shipped to you. or, you can wait until about april 16th
when the HardDrive BLS upgrade will be available. I assume you send in your
HD and they reimage it.
On Wed, Mar 10, 2010 at 10:26 AM, Steve
First posting/reply, so please let me know if there is a more preferred way to
post/reply.
Wael, in VM (if you have the diskspace and depending how long you want to
retain the full setup) you have the ability to do a snapshot of the entire host
system based on time/date. It's not a 1:1 ratio
Many Thanks tom, I found old snapshot and i used it.
On Wed, Mar 10, 2010 at 11:11 PM, Tom V tom54...@yahoo.com wrote:
First posting/reply, so please let me know if there is a more preferred
way to post/reply.
Wael, in VM (if you have the diskspace and depending how long you want to
retain
Thanks Jeff, Ashar,
I found my friend left old snap shot and i used it.
Thanks,
Wael
On Wed, Mar 10, 2010 at 9:55 PM, Ashar Siddiqui siddas...@gmail.com wrote:
I am afraid you won't be able to do it unless you have taken a snapshot of
your VM machine after installation. This way you can
Hello
I have a few updates
If I take MOH out of the game. everything works like charm
If I have MOH involved, If I put a call on hold, i need to wait 10 seconds
at least before i can resume the call, if i do so before 10 seconds, the
call is dropped, the same thing happens when I try to
Hello,
When i call from hq sccp phone to cme sip phone, it rings but when i pick
up. it disconnects
also when i call from cme sip phone to hq (sccp and sip) phone it rings on
the hq phones when i pick t disconnects and contnues ringing on the sip
phone
i have a transcoder configured on the
Hello,
the debug shows that the codec getting to the cme is g711 because the codec
byte is 160 and still it disconnects
On Thu, Mar 11, 2010 at 12:03 AM, Omotayo adefilabi...@gmail.com wrote:
Hello,
When i call from hq sccp phone to cme sip phone, it rings but when i pick
up. it
Omotayo,
How do you have your regions setup in CUCM? The CUCME trunk through the HQ
gateway should be placed in the HQ region.
Can you also send me the HQ config as an attached file. Make sure your dspfarm
has a 'no shutdown issued. Also, make sure your transcoder is registered to
CUCM
The trunk DP has a region that speaks g729 to hq and br1
find attached the config
On Thu, Mar 11, 2010 at 12:24 AM, Berry, Matthew J.
mjbe...@krollontrack.com wrote:
Omotayo,
How do you have your regions setup in CUCM? The CUCME trunk through the HQ
gateway should be placed in the HQ
Have you issued a no shut' on dspfarm profile 1 transcode?
From: Omotayo [mailto:adefilabi...@gmail.com]
Sent: Wednesday, March 10, 2010 5:38 PM
To: Berry, Matthew J.
Cc: OSL Group
Subject: Re: [OSL | CCIE_Voice] calls from hq to and from cme sip phones
The trunk DP has a region that speaks
If all else fails, save your configs and reboot BR2 and HQ routers. And test
again.
From: Omotayo [mailto:adefilabi...@gmail.com]
Sent: Wednesday, March 10, 2010 5:38 PM
To: Berry, Matthew J.
Cc: OSL Group
Subject: Re: [OSL | CCIE_Voice] calls from hq to and from cme sip phones
The trunk DP
yes
if not itwont register to the UCM
Can the transcoder be configured on the br2 router??
On Thu, Mar 11, 2010 at 12:54 AM, Berry, Matthew J.
mjbe...@krollontrack.com wrote:
Have you issued a “no shut’ on dspfarm profile 1 transcode?
*From:* Omotayo [mailto:adefilabi...@gmail.com]
Hello,
When i put the trunk in the hq DP and transcoder to the br2 router, all
calls works
With this i did not assign the transcoder to the trunk.
My concern is that we are suppose to speak g729 from hq to br2, assigning hq
DP to the trunk defeat the purpose
On Thu, Mar 11, 2010 at 12:56 AM,
Hello,
i sed a 7941 sip phone instead of the xlite and all the calls worked
i guess we needed the xcoder because of xlite right?
On Thu, Mar 11, 2010 at 1:24 AM, Omotayo adefilabi...@gmail.com wrote:
Hello,
When i put the trunk in the hq DP and transcoder to the br2 router, all
calls works
28 matches
Mail list logo
