[OSL | CCIE_Voice] sdspfarm

Hi, Does anyone know what is 's' in sdspfarm, and as far as I understood sdspfarm is used to tell CME phones to use that particular dspfarm. Correct me if I am wrong. Rajat ___ For more information regarding industry leading CCIE Lab training, pl

Re: [OSL | CCIE_Voice] CUE Command Line

Hi: Start with this; http://pushkarbhatkoti.wordpress.com/category/cue-voicemail-vpim-networking-cue-to-unity-in-10-minutes/ http://www.brainbump.net/2009/04/easy-approach-for-configuring-and-setting-up-cisco-unity-express/#more-503 hth Date: Mon, 5 Apr 2010 11:22:12 -0400 From

Re: [OSL | CCIE_Voice] Inter-site calls Not routing over GK trunk

Hello: Can you paste: sh gatek gw The gatekeeper routing looks find (anyway zone prefix CUCME 3... would be better), I guess that your call is reaching cme First at cme site: deb voip ccapi inout Check incoming dial-peer and incoming called number, I recommend you to create

Re: [OSL | CCIE_Voice] codecs, BR2/CME/CUE and GK Trunk via HQ

Stephen, A codec mismatch is occurring in br2 when you set codec the sip codec phone as g.711, the outgoing dial peer codec is g.729, therefore you will need a transcoder in br2, To answer to you latter question, yes, you will need the enable inbound faststart, On Mon, Apr 5, 2010 at 3:09 PM, St

Re: [OSL | CCIE_Voice] BLF speed dial CME

Ash, The blf-speed-dial as well as the speed-dial buttons are assigned to available buttons on the phone, so if you want to enable the blf-speed-dial on the button 3 on the phone, the blf tag has to be 1 as it is the next available button after the line buttons are assigned, hth, On Mon, Apr 5,

Re: [OSL | CCIE_Voice] Local Route Group Related question

Hello, You can use 1 route group, in which you will have your two carriers, (the distribution algorithm for them will be the same as the old school model), this route group will be the LRG for your local phones. Then, create a RL that contains the Standard Local Route Group, the RPs should point t

Re: [OSL | CCIE_Voice] CUPS7 install on VM EXSi 4

Earl, I've tried these settings on ESX4 ..still no luck.. .I tried loading ESX 3.5 on my DL380 G4's and it won't load. I have an older box (G3) that I can re-load ESX 3.5 on. Thomas J Koch Unified Communicatons Consultant CCDA, CCNA, CCVP Cisco IPT Design Specalist CompuCom Cell: 630-808

Re: [OSL | CCIE_Voice] CUPS7 install on VM EXSi 4

What is the base version you are trying to install? The only other time I've had issues installing CUPS is when the network connectivity between the VM and an external storage (such as iSCSI or NFS) is less than GigE. Earl Hough CCIE #16508 (R&S/Security) From: Thomas Koch [mailto:koc

Re: [OSL | CCIE_Voice] Inter-site calls Not routing over GK trunk

Thanks Angel. I have fixed it already by adding a num-exp command at BR2. Ash> On 06/04/2010 10:53, Angel Perez wrote: Hello: Can you paste: sh gatek gw The gatekeeper routing looks find (anyway /zone prefix CUCME 3... /would be better), I guess that your call is reaching cme First at cme

[OSL | CCIE_Voice] Time of Day Routing

Hi All, I need some help in tweaking the TOD routing configuration on a real network. Scenario : It's a school environment where we have configured the TOD for the classroom phones to goto VM during instruction hours( 8-5) and ring the phone after hours.It's working and the problem we are facin

[OSL | CCIE_Voice] Supplementary CUCME Services

All - I've been going through the System Admin guide for CUCME and feel overwhelmed by the amount of information contained in the document. I'm wondering how necessary it is to be able to configure MLPP or SNR off the top of my head. I'm wondering if a better approach would be to be familia

Re: [OSL | CCIE_Voice] Time of Day Routing

The way we addressed those in the past is to have any 911 calls coming from a class room ring a internal security group (hunt group) consisting of a dozen or so numbers of internal staff (phones that are always manned in some form or fashion during the day). Any calls that require actual emergency

Re: [OSL | CCIE_Voice] Supplementary CUCME Services

I would say the later. No way you can keep all that information in your head, plus all other areas covered in the blueprint. Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.se

Re: [OSL | CCIE_Voice] Supplementary CUCME Services

I think you have to keep in mind the 3 minute rule per point. If an MLPP or SNR topic is presented to you for say 3 points, can you complete that task in 9 minutes (this may be off the top of your head or simply knowing how/where to look it up in the provided documentation). Close doesn't count,

Re: [OSL | CCIE_Voice] Time of Day Routing

Hi Mike, Thanks for your quick response. We also have the CER integrated with the call manager and configured the onsite alert list(They dont have the internal security and the alerts(phone and e-mail) are sent to some main people of the school.)Below is the setup. 1.Single DID(ELIN)is attached

Re: [OSL | CCIE_Voice] Time of Day Routing

so if you have 2 partitions with the same DN: AllHours_P 6110 <- this partition is where the phone DN sits, this is accessible by the internal phones (school front office, etc) and more specifically from CER ToD_RollToVM_P 6110 <- this partition has a CTI port that has Cfwd All to VM checke

[OSL | CCIE_Voice] LAB 7 question 3.2 (DISA)

I am able to call MVA directory number but instead of being asked to enter PIN...the system is prompting me to enter my remote destination number which means my remote destination number is not been recognized, see config below application service MVA http://10.10.210.10:8080/ccmivr/pages/IVRMai

Re: [OSL | CCIE_Voice] LAB 7 question 3.2 (DISA)

In system parameters, if you select partial match, MVA will always ask your number and then PIN. Change it to exact match and if you have correct caller ID coming in and it matches then you get only asked for PIN. I've tested it with both h323 and mgcp gateways. -- Mustafa sean hurricane wrote

[OSL | CCIE_Voice] Calls from h323 gateway rejected by call manager

I have an h323 gateway provisioned in call manageri can successfully make outbound calls but inbound PSTN calls are not ringing the phone (translation pattern is configured to strip inbound calls from 10 to 4) i am getting the following error in the trace file 04/06/2010 23:57:43.327 CCM|H22

Re: [OSL | CCIE_Voice] Supplementary CUCME Services

When I went through the CUCME admin guide, I looked for features that were supported on the version that is being tested. Since the version tested in LAB is 7.0, then it would be just extra work to practice features that are only enabled with 7.1. For example, when you look at SNR in Express, i

Re: [OSL | CCIE_Voice] Calls from h323 gateway rejected by call manager

You need to add dial-peer voice 100 pots incoming called-number . direct-inward-dial On Wed, Apr 7, 2010 at 7:12 AM, sean hurricane wrote: > I have an h323 gateway provisioned in call manageri can successfully > make outbound calls but inbound PSTN calls are not ringing the phone > (tran

Re: [OSL | CCIE_Voice] LAB 7 question 3.2 (DISA)

if you change it to complete match it breaks requirement for question 3.1 and if i am correct you will need application dial rules... anyways i changed it to complete match,restarted ccm and cti service and it didn't help. thanks. On Wed, Apr 7, 2010 at 2:04 AM, Mustafa wrote: > In system param

Re: [OSL | CCIE_Voice] Calls from h323 gateway rejected by call manager

i had that in another dial-peer, see below: dial-peer voice 1 pots incoming called-number . direct-inward-dial dial-peer voice 1000 voip destination-pattern 3...$ voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.11 dtmf-relay h245-alphanumeric no vad dial-peer voice 1

Re: [OSL | CCIE_Voice] Calls from h323 gateway rejected by call manager

Sean, That's a POTS dial-peer. Add it to a VOIP one too. :) Roger On Wed, Apr 7, 2010 at 5:29 PM, sean hurricane wrote: > i had that in another dial-peer, see below: > > dial-peer voice 1 pots > > incoming called-number . > direct-inward-dial > > dial-peer voice 1000 voip > destination-patt