Hi All ,
Need clarification on Cbarge behavior.
here is the config
Cbarge for brach phone
shared line on both phone
device pool of both phone should have hardware conf bridge
privacy should be disabled
Single button barge should be set to Cbarge
built in bridge should be
you wrote Single button barge should be set to Cbarge
this allows you to barge using button. no softkey will be offered.
this is expected behaviour.
-adil
On Tue, May 31, 2011 at 5:26 PM, Rahul Kapor rahul.kapo...@gmail.comwrote:
Hi All ,
Need clarification on Cbarge behavior.
here is
Hi,
I have configured Mulitcast MoH for Branch office using ccm-manager
music-on-hold , when there is PSTN call to Branch and the Branch user
places him on hold , I can see from the show ccm-manager music-on-hold as
the Multicast is being used, but the same does not work when the Central
site
Multicast MOH x.x.x.x port x route subnetgw
Subnetgw = Ur voice vlan gw ip
Sent from my iPhone
Pls pardon my fat fingers.
On May 31, 2011, at 5:48 PM, Vinay Kumar6 vinayjaisw...@in.ibm.com wrote:
Hi,
I have configured Mulitcast MoH for Branch office using ccm-manager
music-on-hold ,
I have this command in my config but still for the IP Phones registered at
Central site it plays the MOH from CUCM.
Warm Regards,
Vinay Kumar
From:
Ki Wi kiwi.vo...@gmail.com
To:
Vinay Kumar6/India/IBM@IBMIN
Cc:
ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Date:
Ensure you create MOH dp. You can do debug ephone MOH and use rtmt to see
whether mmoh is being triggered or not
Sent from my iPhone
Pls pardon my fat fingers.
On May 31, 2011, at 8:23 PM, Vinay Kumar6 vinayjaisw...@in.ibm.com wrote:
I have this command in my config but still for the IP
Thanks a lot Ki Wi, Multicast moh is working now for calls between the
Branch phone and the Central phone.
The calls which are passing through the gatekeeper are getting ToH when
the CUCME phones are put on hold, if the HQ phones are put on hold the
Multicast is played from the flash of the
Hi,
Currently i am using software vpn client to connect to my rack session. Using
IP Blue clients, IP Communicator etc.. to practice the work books. How ever i
am confused whether i may need hardware phones to test out the specific
features like + dialing, etc..moving forward.
Is it a must
is not a must
with soft clients sometimes you assume your config is working, so you never
troubleshoot because you just can
with hardware phones you can test most off the features if not all of them
2011/5/31 Ilham Jabir ciscotodi...@gmail.com
Hi,
Currently i am using software vpn client to
Hi Ki Wi,
I've encounter the same issue also, and I solved it by changing the
Enterprise Parameters Services URL to IP instead of hostname (Apparently, I
miss that part when I reverted my VMware snapshot), remember I saw this
solution from OSL discussion before.
HTH
Cheers,
Alex
On Tue, May
Hi Guys,
Hope I can seek a little help here, my AIM-CUE 1GB CF card failed on me just
1 week before my exam!
I've getting the error of Not a cisco supported CF. Please use cisco
supported CF and reinstall the software. System Halted. Anyone know how to
solved this issue?
I've try to reinstall
guys i have a question for your
my questions is in regards to the shared bandwidth i know it's measured as a
weight and whenever you have shape you ignore the value so
the q2 in this case the weight is indeed 10 / (10+60+20) = so Q2 has 1/9 of
the shared bandwidth right ?
and this is how the
Hello Experts
An interesting problem to solve for which I'm having a hard time figuring
out the solution myself.
We have a Call Manager node and IP Phones in one location and ingress voice
gateways in other location. Both locations are connected over redundant WAN
links. When one WAN link
Answer your 1st question, its 1/10th.
2nd question is correct.
duy
ccie #27737 voice
tmobile g2
On May 31, 2011 4:19 PM, Cristobal Priego cristobalpri...@gmail.com
wrote:
guys i have a question for your
my questions is in regards to the shared bandwidth i know it's measured as
a
weight and
The mem is your ram, CF is your hd. Try the sandisk CF, I'm sure cisco
just oem it from either sandisk or another manufacturer.
duy
ccie #27737 voice
tmobile g2
On May 31, 2011 1:22 PM, Alex Goh ncsalex@gmail.com wrote:
Hi Guys,
Hope I can seek a little help here, my AIM-CUE 1GB CF card
thank you
2011/5/31 ccieid1ot ccieid...@gmail.com
Answer your 1st question, its 1/10th.
2nd question is correct.
duy
ccie #27737 voice
tmobile g2
On May 31, 2011 4:19 PM, Cristobal Priego cristobalpri...@gmail.com
wrote:
guys i have a question for your
my questions is in regards
For me, everything is fine. I just do everything again from fresh. Same
problem.
Something must be missing along the way.
Is there any IPPM guide online? The one i found from
Finally found the problem, I didn't give enough right to IPPM user. Seems
like it need CCM Super user right instead!
On Wed, Jun 1, 2011 at 6:07 AM, Ki Wi kiwi.vo...@gmail.com wrote:
For me, everything is fine. I just do everything again from fresh. Same
problem.
Something must be missing
So i can re use the 2$$$ to purchase few 100 hrs of proctor lab session instead
of buying the partial hardware which i will use during the rack session.
Bottom line is that we can survive with only with soft phones proctor labs
for practicing the work books prepare for the exam.
Thanks
yes no problem
i know 2 guys that got their ccie voice and they were only using soft phones
2011/5/31 Ilham Jabir ciscotodi...@gmail.com
So i can re use the 2$$$ to purchase few 100 hrs of proctor lab session
instead of buying the partial hardware which i will use during the rack
session.
Thanks for the advice Chris.
On 01-Jun-2011, at 6:55 AM, Cristobal Priego wrote:
yes no problem
i know 2 guys that got their ccie voice and they were only using soft phones
2011/5/31 Ilham Jabir ciscotodi...@gmail.com
So i can re use the 2$$$ to purchase few 100 hrs of proctor lab session
Sorry, should have been more clear. Using H.323.
The call preservation feature of H323 applies when the gateway loses
connectivity to Call Manager only, so that the RTP stream is preserved to the
phone, but here the RTP stream itself is being interrupted.
On May 31, 2011, at 6:58 PM, amit
Sorry for late answer, but just thought about one more thing, make sure the
phone has CTI Control enabled, without this if you even have phone association
with the correct user it will not work.
Same goes for all other services as voiceview on cue or ippm of cups.
Regards,
Sent from my iPad
Thanks Amit but unfortunately this will not work. As I mentioned before, the
RTP stream is being interrupted too. H323 call preservation, in my opinion,
is only for signaling loss to the Call Manager only, but here the IP Phones
are temporarily losing connectivity to the GW too which will
try this
http://ccieash.wordpress.com/2010/06/25/h323-call-preservation/
might help you...
--- On Wed, 6/1/11, CCIE Voice ccievoicelab.c...@gmail.com wrote:
From: CCIE Voice ccievoicelab.c...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Call Preservation Issue
To: amit batra batraji...@yahoo.com
Hello everyone, I got two CUE from a friend, but one of then is rebooting
the router. Hardware issue? there is a way to test it with parts of the one
working?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
Voice service VoIP
H323
Call preserve
Should be the command set. I use it as my default configuration.
Sent from my iPhone
On May 31, 2011, at 4:04 PM, CCIE Voice ccievoicelab.c...@gmail.com wrote:
Sorry, should have been more clear. Using H.323.
The call preservation feature of H323
Alex;
You need to re-image your CF with another known good CF.
I just did this several weeks ago for a UC500 system.
I got another CF from a good system, then I used my linux server to do a bit
by bit copy of the CF using 2 USB multi-card readers.
If you are not familiar with linux you can use
Guys;
I've been using a VWIC-2MFT-T1-DI in my PSTN/WAN router for the last 6
months. No issues encountered so far.
Also for E1 cards, you can use a VWIC-(2)MFT-G.703. I'm using one in my BR2
Router.
No special configs for either. For voice they act just the same as the
regular cards.
Hope
hello all,
I have a question for you guys
hopefully you can help me understand, this is way too confusing for me
when i issue auto qos on a 3750 switch this is how the config will look like
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2
Ya, i believe assigned the standard CTI control of all devices + standard
CTI enabled to phone messenger apps user will do the trick.
For phone user,a combination of standard CCM end user + standard cti
enabled should be sufficient.
Shingei.
On Wed, Jun 1, 2011 at 6:11 AM, Ki Wi
Great proof of concept, they should work exactly the same since they only
add features but you never know until you do it : )
On Tue, May 31, 2011 at 7:51 PM, Sam Park upperlevelpark...@gmail.comwrote:
Guys;
I've been using a VWIC-2MFT-T1-DI in my PSTN/WAN router for the last 6
months. No
Maybe you can try it next time, for me it doesn't alert me till I give me
phonemessenger(IPPM) account a CCM super user right, weird.
On Wed, Jun 1, 2011 at 9:26 AM, ShinGei Yong shingei.y...@gmail.com wrote:
Ya, i believe assigned the standard CTI control of all devices +
standard CTI enabled
Use the auto configured threshold is fine and modify the cos of the
particular q. What you are looking at is the dscp-map to q.
duy
ccie #27737 voice
tmobile g2
On May 31, 2011 9:21 PM, Cristobal Priego cristobalpri...@gmail.com
wrote:
hello all,
I have a question for you guys
hopefully
34 matches
Mail list logo
