Hi Duy,
Thanks I shall test it out and confirm. my understanding could be wrong.
Regards,
Alex
On Mon, Jun 27, 2011 at 10:04 PM, ccieid1ot wrote:
> Alex, definitely needed. Test it out by enabling it on HQ router than
> don't enable on BR2 router. Now open up the cue gui and see if it operat
I did this today and had no issues. I did not need the ntp master command.
I did however experience the issues:
could ping CUE from my HQ router, could not ping HQ router from within CUE,
could not get ntp to associate.
oops, int service-engine0/0 was shut. I no shut and was able to ping and
Hi,
For my understanding/testing the eight channels of an octo-line are shared
between each ephone using them.
This must be taken in consideration while considering
max-calls-per-button,busy-trigger-per-button and huntstop channel.
Making an example :
ephone-dn 7 octo-line
number 3011
hunts
Hi Bill,
What do you mean by "their own HD"?
Thanks
2011/6/28 Bill Lake
> I am running my CUCM Pub/Sub, CUPS and CUC all version 7 on a single
> intel quad core with 8 GB ram. I have found that if the VM's have
> their own HDD they perform much better.
>
> On Mon, Jun 27, 2011 at 4:25 PM, Mich
Originally, I had a computer running VM Server and an Athlon processor.
I've had tons of problems from not being able to start voice media service
and CTIManager service crashing everytime I try to use CUPS. So I would
highly recommend getting an actual server that can run ESXi.
On Mon, Jun 27, 2
Hi guys
I need help in setting up AA in Unity Connection.
I have setup a new call handlers called AA in Unity Connection with the
extension set to 5000 with the setup of the user inputs.
In CUCM, I have created a CTI route point with DN 5000, setting the CFA to
voice mail.
The prob
I tried this and it works without the master command. No need to add master
for CUE or anything else.
From: Cristobal Priego
Date: Mon, 27 Jun 2011 18:54:59 -0700
To: Alan Gardner
Cc: "ccie_voice@onlinestudylist.com"
Subject: Re: [OSL | CCIE_Voice] CUE NTP synchronisation with HQ Router
Lo
Hi Experts,
Kindly assist on how i will connect my PSTN phone and 3 other phones with each
phone from each branch site.
Which port on the 881-sec-k9 will i connect my laptop to.
Thanks for your assistance.
Pithog Oil.___
For more information regarding in
looks like you got it right then.
if you are hearing a prompt that the user is unavailable, it is because you
havent recorded a custom prompt and CUC is giving you a made up one. I assume
you do not have an actual user named AA.
Attempt to use your caller inputs now and see whay happens.
The
looks like you are monitoring tx packets. think you intended on monitoring rx.
Sent from my iPad
On Jun 27, 2011, at 12:15 PM, "Mike " mailto:mik...@msn.com>>
wrote:
Hi all I’m trying to lab up a QOS run through and for some reason the switch is
resetting everything to 0
Switch config:
mls
You need a new "forwarded rule" It should be set to send anything received from
forwarding number 5000 to go to the AA call handler. It needs to be placed
higher in the list than the default forwarded rule.
From: v...@iinet.net.au
To: ccie_voice@onlinestudylist.com
Date: Tue, 28 Jun 2011 21:43:
I monitored transmit and receive and the phone doesn’t seem to be tagging
frames or packets unless the switch is zero’ing them out.
From: Peterson, Ryan [mailto:ryan.peter...@pcmall.com]
Sent: Tuesday, June 28, 2011 9:44 AM
To: Mike
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_
you would not want that command. it wouldnt matter if you had it since you
would have had to enable multicast routing, but if you accidently did that,
then the user could hear both CUCM and flash audio streams on their phone at
the same time.
You would however need it if you were sourcing MOH
have you tried adding the cisco-phone trust?
Sent from my iPad
On Jun 28, 2011, at 6:51 AM, "Mike " mailto:mik...@msn.com>>
wrote:
I monitored transmit and receive and the phone doesn’t seem to be tagging
frames or packets unless the switch is zero’ing them out.
From: Peterson, Ryan [mailto:r
I’ve tried everything:
mls qos trust device cisco-phone
mls qos trust dscp
even full AutoQos and its not tagging packets.
From: Peterson, Ryan [mailto:ryan.peter...@pcmall.com]
Sent: Tuesday, June 28, 2011 9:58 AM
To: Mike
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice
Ever seen this one:
Cisco Unified Communications Manager Express System Administrator Guide ??
(I'm sure I don't need to post the link)
Check examples "Shared Octo-Line Directory Number".
Shared Octo-Line Directory Number
On Mon, Jun 27, 2011 at 10:12 PM, Cristobal Priego <
cristobalpri...@gm
Cristobal, your statement is not correct. You don't need "ntp master".
Please try to make advice that you are sure of. Else it creates confusion
for the newcomers.
Have you read the explanation for that command on any of the "command
reference guides".
For the lazy people:
Because the Cisco impl
That did it, but shouldn't the command "switchport voice vlan XXX" create a
pseudo trunk?
This config showed dscp EF packets wireshark.
interface FastEthernet0/3
switchport trunk encapsulation dot1q
switchport mode trunk
switchport voice vlan 10
mls qos trust dscp
spanning-tree portfast
---
HI,
I have had issues authenticating my web user in the setup wizard. My question,
is there a certain sequence of CLI commands to make local authentication work?
I don't have a config to show but I do have compared my configuration to the PG
config and they are exact.
I have even changed the pas
Hi Randall,
In your cme you need this
Ip http server
Ip http path flash: (path for GUI files for CME)
Telephony-service
web admin system name administrator password cisco
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] En nombre de Randall Crumm
E
Hi
I'm setting up a switch, router and phones and the proctorlabs racks. I plan on
using 7960 phones because they are cheaper
Is there any reason to get 7961's? I'm just keeping the cost down
Thanks
Randall
Sent from my iPhone
___
For more information
Hi all,
I have configured route list with 1st choice as gatekeeper and 2nd choice as
local PSTN.
When I shut down the Gatekeeper, the call goes out from PSTN and back into
branch gateway via PSTN as expected.
debug isdn q931 shows the 'Calling Party Number' in +E164 format but the
phone display
Your original configuration did not have a native vlan command maybe
the voice vlan does not work if there is no native vlan active. Not
able to lab test to prove this but perhaps you could remove the
trunking commands and use switchport access vlan 1
Also remember that switchport mode access/swi
Hi Randall
If I'm not wrong, 7961 and 7941 series support the + dialing from call list,
which probably you need it to practice the globalization/localization call
routing.
Regards,
Alex
On Wed, Jun 29, 2011 at 8:08 AM, Rrcrumm wrote:
> Hi
> I'm setting up a switch, router and phones and the pr
Hi Adil,
It is normal or expected behaviour where + sign will not be able to pass to
h323 gateway, u will to prefix using translation-rule on h323 gateway or
configured incoming prefix on cucm
from the CUCM Help page you will see this
SIP and MGCP gateways can support sending the international e
Hi Alex,
thanks for this.
In AAR situation, when forwarding call comes in it shows the forwrding
number with + sign.
On procotor lab's PSTN phone which is CME phone also displays + sign. I
looked at proctorlab's PSTN-WAN config and i did not find any specific fix
they have done to display the ca
What Alex describe is one of the reason that the "+" sign doesn't appear due
to the H323 native behavior.
Another reason is the GW ios version and the phone load. You may refer to
the below link on why proctor lab PSTN can display the "+" sign.
http://onlinestudylist.com/archives/ccie_voice/2010-M
Thanks everyone!!
From: Michael Roger
To: 'Rrcrumm' ; 'Ccie'
Sent: Tuesday, June 28, 2011 8:40 PM
Subject: RE: [OSL | CCIE_Voice] Setting up home equipment
You need minimum 7961 for plus dialing.
-Original Message-
From: ccie_voice-boun...@onlinestudyl
28 matches
Mail list logo
