guys...when i working on ipx racks...
i am facing issue...
i can access cuc work on it...
when leave vm from pstn or end user to nay cuc user...it goes...correctly..
but on ip phones..it shows no mwi and not vm notification..
and also when i check vm..it says no vm for u...
what is issue and
admin:run cuc dbquery unitydirdb EXECUTE PROCEDURE
csp_SmtpAddressMigrate('proctorlabs.com','cuc7-pub')
;)
Sent from my iPad
On 26 août 2013, at 14:44, Amit Sharma aryan231...@gmail.com wrote:
guys...when i working on ipx racks...
i am facing issue...
i can access cuc work on it...
when
yes you need Xfrom,
From: Barrera, Hugo hugo.barr...@nexusis.com
To: Bill whl...@gmail.com; Edgar Feliz ejzi...@gmail.com
Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Sent: Sunday, August 25, 2013 4:01:05 PM
Subject: Re: [OSL | CCIE_Voice] Mailbox Transfer
What I’m
build home lab Amit
From: Amit Sharma aryan231...@gmail.com
To: CCIE Study ccie_voice@onlinestudylist.com
Sent: Monday, August 26, 2013 6:44:55 AM
Subject: [OSL | CCIE_Voice] cuc vm issue with hq user..
guys...when i working on ipx racks...
i am facing issue...
i can access cuc work on it...
Amit,
Give us more information. IS CUCN integrated with SCCP or SIP? If SCCP, what
CSS are set for the VM ports and what are your MWI numbers? If SIP, what CSS
is set on the SIP trunk?
Regards,
Nathan Richie
CCIE #27910 (RS)
From: ccie_voice-boun...@onlinestudylist.com
I guess I’m trying to understand why? Wont it still show correct caller ID on
debug isdn q931 though? I’ll have to lab this again…the only reason the calling
party xform patterns would be needed is if they don’t send correct plan and
type are my thoughts.
Regards,
Hugo
From: Karen Johnson
Hi
Try entering no service config in the config mode, save the config and
reload the router
Hope that help,
Rwgards
Sent from my Windows Phone
--
From: Hesham Abdelkereem
Sent: 8/26/2013 1:05 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] ACS 2509
Thank you very much Sam for that and I will try it on the weekend and I'll
let you know.
Have a wonderful day,
Hesham
On 26 August 2013 13:26, Sam Wilson wilsonc...@gmail.com wrote:
Hi
Try entering no service config in the config mode, save the config and
reload the router
Hope that
Sorry hit the enter too fast last time and sent you the reply.
Since you mention you are using laptop keyboard, that must be the issue as
to enter or type ^ you have to know the correct combination of the keys
unlike the most desktop keyboards
Hope that helps
Sent from my Windows Phone
I believe this is a bug and if that is correct the symptoms are that you
call and leave a message, can even review the message and it never shows up
as a message for the user.
If this is the case then I am pretty sure you are reaching the bug, try
sending the message from another user registered
Hi All,I'm wondering about QoS on remote site.I just applied auto-qos between HQ and remote site, everything looks fine.When I run this command on both routers, in remote site I can't see packets.HQ Class-map: AutoQoS-VoIP-RTP-Trust (match-any) 11139 packets, 704260 bytes 5 minute offered
You will have to either trust the dscp marking done by the switch or you
will have to mark them again.
Please post your router configs and may be we can get a bit more detailed
Hth
Sent from my Windows Phone
--
From: Alex Mendoza
Sent: 8/26/2013 10:54 PM
To: CCIE
12 matches
Mail list logo