Nope, I didn't reset them.
I believe they only test for functionality. By automated script.
They don't really look at individual setting unless is borderline fail or
something.
Sent from my iPhone
Pls pardon my fat fingers.
On 17 Apr, 2012, at 12:08 AM, AJ wrote:
> If we enable any detail l
Euro
Sent from my iPhone
Pls pardon my fat fingers.
On 10 Apr, 2012, at 8:29 PM, Ken Wyan wrote:
> I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI.
>
> I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint
> configuration page.
>
> which one is equival
Most people will 'test drove' it anyway even with the video.
Just that they spend lesser time to find the correct location. Will video
it in the future, if i take another ccie track.
On Sat, Apr 7, 2012 at 12:13 AM, Michael Miller wrote:
> I was glad to see that video before my first attempt. I
rs /
> Routers next to you? If so a unique experience as all other places access a
> remote POD.
>
> Ken
>
> On Sun, Mar 11, 2012 at 7:32 AM, Ki Wi wrote:
> Personally I went 3 different locations before for voice. I rate
>
> 1) sydney the highest due to their p
Personally I went 3 different locations before for voice. I rate
1) sydney the highest due to their proctor (maybe it's a small group always?).
He will give some advise before the lab (although it's more for r&s). Nearer to
my location as well. When asked him question about my concern, he told
Maybe there's better way but I would have staged it in lab environment.
I have seen first error before but can't really remember how to resolved it.
All I remember is some name with - or _ might not work. You might want to
verify or just remove the device association under this user as well whi
Change the server address from hostname to ip?
Sent from my iPhone
Pls pardon my fat fingers.
On 17 Jan, 2012, at 7:15 AM, Errol Abrahams wrote:
>
>
> Hi All,
>
> I had a problem with my VMWARE Server and I had to rebuilt the system from
> scratch. I have reloaded PUB,SUB,CUPS,CUC and CUCC
No
Sent from my iPhone
Pls pardon my fat fingers.
On 4 Dec, 2011, at 6:54 PM, datucha123 datucha123 wrote:
> Is the Fax subject to test on the exam?
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipex
It's real router of course.
In actual lab, my router even crashed before
Sent from my iPhone
Pls pardon my fat fingers.
On 2 Dec, 2011, at 11:21 AM, Ken Wyan wrote:
> Hi,
>
> Does CCIE Voice lab routers are real or run on IOU?
>
> Guys say not to restart IOU during lab
>
> _
Agree, I did this for my home router because I wanted dhcp reservation for my
pc at home.
Why would a enterprise do that ? Using the default Cisco dhcp in the cucm is
already one of the worst choice.
But oh well, this is how Cisco earn our money.
Sent from my iPhone
Pls pardon my fat finger
It should be 3999 The amount of . Depends on your extension number.
Sent from my iPhone
Pls pardon my fat fingers.
On 14 Nov, 2011, at 7:47 PM, Gregg Malcolm wrote:
> Running into a silly problem with my CUE where the MWI isn't seen by the
> wizard nor does it work. Wizard sees the users/
Setup wizard? Yes
Sent from my iPhone
Pls pardon my fat fingers.
On 14 Nov, 2011, at 2:22 AM, "Google" wrote:
> Hi Friends,
>
> In Exam can we use CUE initial configuration by GUI?
>
> Thanks
> Raj
> ___
> For more information regarding industry l
Nbar is just something to help network admin out in actual life as it comes
with predefined port numbers for the protocols that it have ability to match.
Whether nbar is available where in which device is not important as we human
have the ability to take that chart ( port listing ) and convert
I think there's a discussion before. If you are so concern about the sequence,
you can use SQL insert command.
In cucm 7 release note, it does mentioned about how to add corporate directory
back if you accidentally deleted it. Inside this command, you will realize you
can mark the enterprise su
Hi Steven,
This is a normal behavior. It is cause by some sort of DOS protection in place.
If you ping from windows, you won't see this symptom. Basically from Linux or
iOS, they fire ping much more rapidly than windows.
It happens on physical server as well.
Sent from my iPhone
Pls pardon m
Serious? Not within 2 years after you pass written?
It will be 1.5 years if you didn't attempt the lab at all.
Sent from my iPhone
Pls pardon my fat fingers.
On Jul 7, 2011, at 11:28 PM, Nizar Jafri wrote:
> 1 year after a failed lab.
>
> even if you try 3 times, it will remain valid one y
Switchport mode access xx
Switchport voice vlan YY
Generally this will do. Tried and tested. No pts deducted. If the exam ask for
portfast then pls insert cmd accordingly.
I really hate people giving the wrong info or make people key in unnecessary
commands for exam.
Sent from my iPhone
Pls
This is not ccie question.
I'm doing a integration with avaya.
CUCM 8.5SU1 via IOS GW to Avaya.
H323 is used between them.
When I use my ip phone and registered to IOS GW(cme). Incoming call from avaya
I can see alerting name. However, if I register the same phone to cucm, I can't
see the ale
What kind of technical problem you faced and managed to get a voucher?
My router rebooted halfway due to traceback consider technical problem ?
Haha... I didn't get any extra time for it and even spend extra time to run
back and fore to inform the proctor =[ bad luck
Sent from my iPhone
Pls p
Yes,the only thing you will need urgent priority will be something like 999 in
a dialplan 9xxx.
For general knowledge, this is required for singapore/ hk dial plan.
Sent from my iPhone
Pls pardon my fat fingers.
On Jun 27, 2011, at 6:57 AM, Roger Carpio wrote:
> I agree with Randall, if
Just wondering
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Maybe there a run sql update?
Sent from my iPhone
Pls pardon my fat fingers.
On Jun 10, 2011, at 9:15 PM, VoIP Study wrote:
> I found this to be a quick way to rebuild the services. As discussed on this
> list, the 7.0.x release notes indicate how to rebuild the Standard IP Phone
> Services
This requirement is stupid. If you never ever take a lab before and no one
tells you site C is HK, who will know this is an requirement?
Or maybe Site B is now India, how many people know the settings there?
On Fri, Jun 10, 2011 at 11:03 PM, Victor Malyuga
wrote:
> from the Cisco Doc
>
> Usage
Maybe you missed out some requirement?
Such as they want you to use system recording but you recorded your own?
They want you to set agent to not ready after the call ended? Set the agent
to work state after the call ended?
Queue the call to special CSQ, etc etc.
UCCX is a nightmare.!
On Wed,
However, with that.. you can't press the voicemail button anymore !
On Wed, Jun 8, 2011 at 10:16 PM, adam compton wrote:
> Worked hear as well!
>
> On Wed, Jun 8, 2011 at 8:57 AM, Rahul Kapor wrote:
>
>> It worked !!! :)
>> awesome Vinay
>>
>>
>> On Wed, Jun 8, 2011 at 6:18 PM, Vinay Kumar6 wr
Incoming i always do it on the voice-port level
Outgoing i always do it on the dial-peer level due to ISDN type and plan
requirement.
On Wed, Jun 8, 2011 at 10:14 PM, Randall Saborio wrote:
> in real world, dial-peer translation-profile are used when PSTN connection
>> is through BRI and FXO
Do it via translation rule is the best as it give you fexibility and ability
to add + sign in front for calling number which is somehow loss when using
h323. =(
On Wed, Jun 8, 2011 at 9:19 PM, Vinay Kumar6 wrote:
> Hi,
>
> For H323.gateway, how do we setup the called party number type in isdn
>
FYI, for those didn't get to read ccie score report before, there's a
sentence saying that they grade you according to functionality required on
the exam not on best practices.
So as long it works, i don't think the protocor cares. You can create a
local dhcp scope on the router to serve config fo
Yes, just refer to phone admin guide.
Memorising that is a bit too hardcore ! It's hardly useful in real life
situation. Out of 10 deployment, i only use it maybe once.
On Wed, Jun 8, 2011 at 3:07 PM, Victor Malyuga wrote:
> Example of List.xml file is in the Phone Admin Guide in phone
> customi
I always add mine by extension in IPPM. Username is too troublesome especially
I love to use CAP letters and some apps are case sensitive.
Under phone, did you try to select owner on the Phoenix as well? I always do it
in 3 location , phone level, line level and user level association. Phone le
In that case, you have a great time of converting everything to e164. =P
Use called party transformation to strip them into the correct digits at the
gateway level.
Example : Site A ( local area code 919) ---> calls to local number is
8123123
Converted the dialed number to +19198123123
Use a ro
uration Example section then not having GUI
> exposure will be a problem.
>
> If the GUI is not in flash drive, then one should know the archive command to
> extract it.
>
> -adil
>
>
> On Sun, Jun 5, 2011 at 3:09 PM, Ki Wi wrote:
> Why not just use comman
ation to
> “3” on pub( I have timed it to 10 minutes). In that case you just have to
> wait.
>
>
>
>
>
> *From:* Ki Wi [mailto:kiwi.vo...@gmail.com]
> *Sent:* Sunday, June 05, 2011 3:10 PM
> *To:* Emin Guliyev
> *Cc:* ccie_voice@onlinestudylist.com
> *Subject:* Re: [
Reserved queue is not threshold 3. Period!
Btw, are you the CUPS expert? =P
http://htluo.blogspot.com/
On Mon, Jun 6, 2011 at 2:33 AM, Michael Luo wrote:
> That's why I got confused. If it's not configurable, whey the command
> option was there (to set threshold 3).
>
>
> On Sun, Jun 5, 2011 a
I faced this problem on my vmware recently. My Pub was "3". =(
What I did was utils dpreplication stop ( on both pub and sub) then reset
all on pub. In the end, halfway I rebooted both callmanagers and proceed
with other task. Around 40 minutes later or less, both are back to 2!
>From my deployme
Means it's default, you can't see it and can't set it. If do you, you will
see a value call threshold 3.
That's why you always see threshold 1 and threshold 2 around in auto qos.
=)
On Mon, Jun 6, 2011 at 1:55 AM, Michael Luo wrote:
> Also per
> http://www.cisco.com/en/US/docs/switches/lan/cat
For me, i joined this . There's some cisco guys inside there actively
answering queries during their free time. No SLA. =)
cisco-v...@puck.nether.net
On Sun, Jun 5, 2011 at 9:43 AM, donny f wrote:
> hi all,
>
> any one know what is good Mailing list for cisco voice or UC real
> implementation
What's the version of the CUE?
On Sun, Jun 5, 2011 at 10:30 AM, Bill Lake wrote:
> If this is a live deployment always consider your fall back, so always back
> up and always plan for the worse, that it won't work and you will have to
> rebuild on the new router and restore everything or fall ba
ed, without this if you even have phone
> association with the correct user it will not work.
>
> Same goes for all other services as voiceview on cue or ippm of cups.
>
> Regards,
>
> Sent from my iPad
>
> On 29 May 2011, at 20:32, Ki Wi wrote:
>
> Everything shou
Why not just use command prompt instead? To use GUI you must be very familar
with their rules, last time when i did my first live integration i spend
quite sometime to figure it out and consulted google a couple of times
because it's unable to add phone from the CUE gui kind of crap.
Even i'm supe
under what situation we will need this?
However, today i purposed left it as default (true) , everything still works
fine for MGCP/MGCP failover and H323/MGCP failover.
My guess is it's more for random retry? If this circuit fails due to unable
to reach that destination, it will try another circ
Qn 1) For example, the recent discussion on NTP really makes me wonder. I
had my first lab attempted before but it was a disaster. I lose some pts @
basic campus infra.
Do we really need to set DST for those countries with DST? anyone can
verify? I didn't went through any training and i believed m
Does it do anything without filling in the start date and end date?
2011/6/3 Roig Borrell, Francesc Xavier
> Hi,
>
>
>
> For US you need configure
>
>
>
> HQ
>
> Ntp server xx.xx.xx.xx
>
> Clock timezone pst -8
>
> Clock summertime pst recurring
>
>
>
> For Honkong
>
> Ntp server xx.xx.xx.xx
>
Do you do what stated or do more?
Let's say if they ask you to set ntp on all routers and callmanager. Do I need
to set it on presence, unity and other component?
For timezone in mailbox, is it necessary to make it right for all sites?
(normally I will else it sounds irritating to have wrong ti
Use calling number transformation
Sent from my iPhone
Pls pardon my fat fingers.
On Jun 1, 2011, at 2:30 PM, Vinay Kumar6 wrote:
> Hello,
>
> Is it possible to display one calling party number (say 111) on the IP
> Phone when ringing and display another calling party number (say 911
"standard CTI enabled" to phone messenger apps user will do the trick.
>
> For phone user,a combination of "standard CCM end user" + "standard cti
> enabled" should be sufficient.
>
> Shingei.
>
>
> On Wed, Jun 1, 2011 at 6:11 AM, Ki Wi wrote:
>
Finally found the problem, I didn't give enough right to IPPM user. Seems
like it need CCM Super user right instead!
On Wed, Jun 1, 2011 at 6:07 AM, Ki Wi wrote:
> For me, everything is fine. I just do everything again from fresh. Same
> problem.
>
> Something must be miss
--_Configuring_Cisco_IP_Phone_Messenger_on_Cisco_Unified_Presenceis
pretty useless.
On Wed, Jun 1, 2011 at 1:21 AM, Alex Goh wrote:
> Hi Ki Wi,
>
> I've encounter the same issue also, and I solved it by changing the
> Enterprise Parameters Services URL to IP instead of hostname (Apparently, I
> miss that part when I reverte
at
> Central site it plays the MOH from CUCM.
>
> Warm Regards,
> Vinay Kumar
>
>
>
>
> From: Ki Wi
> To: Vinay Kumar6/India/IBM@IBMIN
> Cc: "ccie_voice@onlinestudylist.com"
> Date: 05/31/2011 04:54 PM
> Subject: Re: [OSL | CCIE_Voice]
Multicast MOH x.x.x.x port x route subnetgw
Subnetgw = Ur voice vlan gw ip
Sent from my iPhone
Pls pardon my fat fingers.
On May 31, 2011, at 5:48 PM, Vinay Kumar6 wrote:
> Hi,
>
> I have configured Mulitcast MoH for Branch office using ccm-manager
> music-on-hold , when there is PSTN c
Hey,
Do you still remember how did you resolve this alert issue? I'm still trying
to train myself up in CUPS. Last night, my alert was working, my IPPM login
wasn't. Today my IPPM is working but no alert. =( All other components are
working.
On Sun, Dec 26, 2010 at 12:59 AM, ShinGei Yong wrote:
om/communities*> and
> our public website at www.ipexpert.com <*http://www.ipexpert.com/*>
>
> From: Ki Wi
> Date: Sun, 29 May 2011 21:38:31 +0800
> To: George Goglidze
> Cc: OSL Group
> Subject: Re: [OSL | CCIE_Voice] CUC Phone View
>
> I have associated every
If you pass your exam, you won't know your score. It's just a pass i think.
On Sun, May 29, 2011 at 6:56 PM, Rogers Ochieng wrote:
> Then you surely know to raise the matter with cert support? :)
>
> Rogers CCIE #28970 (Voice)
>
> 2011/5/29 hmmm
>
>> Hi,
>>
>> I know that normally results are ne
phone view.
> Check the others too,
>
> Sent from my iPad
>
> On 29 May 2011, at 11:34, Ki Wi wrote:
>
> anyone tried it?
>
> I followed the guide closely from here
> <http://blog.ipexpert.com/2010/11/17/setting-up-phone-view/>
> http://blog.ipexpert.com/201
anyone tried it?
I followed the guide closely from here
http://blog.ipexpert.com/2010/11/17/setting-up-phone-view/
My HQ Ph1 can choose option 5 then follow by 4 to view the messages while
other phones such as HQ Ph2 and BR1 Ph1/2 didn't have the option 4 same as a
lot of others in the comment.
my iPad
>
> On 26 May 2011, at 15:33, Ki Wi wrote:
>
> I uploaded some crap image file into the tftp and after rebooting the
> service, i'm able to retrieve that file.
>
> On Fri, May 27, 2011 at 6:29 AM, Ki Wi <
> kiwi.vo...@gmail.com> wrote:
>
>> Any on
I uploaded some crap image file into the tftp and after rebooting the
service, i'm able to retrieve that file.
On Fri, May 27, 2011 at 6:29 AM, Ki Wi wrote:
> Any one faced issued with updating RingList.xml ?
>
> I have downloaded a copy and edited it. Next, i went to TFTP
Any one faced issued with updating RingList.xml ?
I have downloaded a copy and edited it. Next, i went to TFTP management to
upload it into the root directory of both CCM ( I left the directory filed
empty)
Restarted both tftp service and it seems like it's using the default
RingList.xml instead
Cristobal Priego
> When I have had the same problem reload is the solution
>
> Enviado desde mi iPhone
>
> El May 22, 2011, a las 1:28, Ki Wi escribió:
>
> Anyone faced this weird issue?
>
> Sometimes even with "mgcp bind" command specified, it will bind to cc
R3(config)#class-map test
R3(config-cmap)#match dscp R3(config-cmap)#match dscp ?
<0-63> Differentiated services codepoint value
af11 Match packets with AF11 dscp (001010)
af12 Match packets with AF12 dscp (001100)
af13 Match packets with AF13 dscp (001110)
af21 Match p
Anyone faced this weird issue?
Sometimes even with "mgcp bind" command specified, it will bind to ccm using
wrong ip address. What's the solution to resolve it?
For me, i will just reboot the router but it waste quite a few minutes.
___
For more informa
Yes, you can.
Create a partition which will be active during business hours and associate
it with the route pattern
On Sat, May 21, 2011 at 7:37 AM, Randall Crumm <
randall.cr...@flextronics.com> wrote:
> HI,
>
> I am working on wb2 lab 1
>
>
>
> It is asking to not allow intl calls during non-b
Which lab location did you did your attempt? Looks like the protocor isn't
too friendly.
I read a thread in Cisco forum before, not sure it's netpro or the new
learning forum.
For ccie voice, you can do whatever you take to reach the objective such as
using static route all the way if you don't k
rom cucm or cme ?
>
> Best Regards ,
>
> Moataz Mamdouh Tolba
> CCIE # 26129 (Voice)
>
> -Original Message-
> From: Ki Wi
> Sender: ccie_voice-boun...@onlinestudylist.com
> Date: Sun, 15 May 2011 19:53:56
> To: Pavan
> Cc:
> Subject: Re: [OSL | CCIE_V
supported in 7 but is
> available in 8.0 (i believe it was released in 7.1)
>
> Also e2e rsvp is only supported over sip.
>
> -pavan
>
> On May 14, 2011, at 12:15, Ki Wi wrote:
>
>> Hi Everyone,
>> I got rsvp working but it's for 10 seconds only.
>&g
I think you are missing the following commands from your description
gw-type-prefix 3#* hopoff PSTN
On Sat, May 14, 2011 at 8:44 PM, CCIE Voice wrote:
> You need at least 1 VoIP dialpeer on the gateway for the gateway to
> register with a GK.
>
> --
>
>
> On May 13, 2011, at 9:36, Gregg Malcol
16634 142.222.64.2 Se0/1/0. FF RATE
80K
142.102.64.254 142.1.66.254 UDP 16634 18378 none none FF RATE
24K
Hopefully someone can answer me.[?]
On Fri, May 13, 2011 at 1:36 PM, Ki Wi wrote:
> Hi Sandeep,
> Thanks for reply.
>
> Do you happen to know about any mechanism
> Thanks,
> Sandeep
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com on behalf of Ki Wi
> Sent: Fri 5/13/2011 2:08 AM
> To: OSL Questions
> Subject: Re: [OSL | CCIE_Voice] RSVP within 2 different location is fine
> butvia GK is a problem
>
After future troubleshooting, it seems like RSVP went the wrong way, it went
to BR1 router instead of BR2 router.
I wonder, how should i configure it to make RSVP working. Am i suppose to
get BR2's MTP to be registered to CUCM as well?
On Fri, May 13, 2011 at 3:39 AM, Ki Wi wrote:
>
r H323/GK related, please point me to it.
Cheers,
Ki Wi
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Oops.. it's ok now. After fixing some region issue. Took a bad vmware
snapshot the other day.
On Fri, May 13, 2011 at 12:50 AM, Ki Wi wrote:
> I'm calling from CUCM to CME
>
> I have hardcode all the inter and intra-regions to use g711. When using
> default g729, it is wor
Did you put in allow h323 to h323?
Sent from my iPhone
Pls pardon my fat fingers.
On Apr 29, 2011, at 6:18 AM, "Shrini" wrote:
> I configured MVA on H323 GW in 5 mins and can get everything worked perfectly.
>
> Only when I use MGCP Hairpin I am not able to call after pressing 1. The call
>
Have you associate the line to the user ( go to user's phone > select the
extension > associate end user at the bottom )
This setting is related to cups.
Sent from my iPhone
Pls pardon my fat fingers.
On Apr 26, 2011, at 3:17 AM, donny f wrote:
> hi all,
>
> does anyone have a link or ste
I think the solution is to download that phone's SEP config and host it in cme.
Make cme serve that file.
Go to cucm, that specific phone, set the load server to cme. This way, it
shouldn't be able to retrieve that ringlist.xml from cme. Unless there's a
requirement to serve out ringlist for bo
Firstly, i must say quite a number of ccie passed their exam by using dump or
attending 'bootcamp' which guarantee a one time pass.
My colleague once told me that ccie are everywhere in china, even a ex chef can
become a ccie in 6 mth to 1 year time. Do you dare to employ him? A lot of them
or
t; So confidence to nailed it?
>
> Gd Luck to you!!!
>
> Shingei
>
> On Wed, Mar 9, 2011 at 10:07 AM, Jon 1992 wrote:
> Tokyo is remote, however speeds are pretty impressive.
> Bangalore, India lab is a bit slow I heard.
>
> From: Ki Wi
> Sent: Wednesday, M
Which ccie voice lab location is having physical rack and which location is
remote ?
I can confirm HK is remote, i went for my first attempt recently. Overall
speed is ok except for those VNC connections you need to make.
What make it pain in the arse is you have to use RTMT on the remote PC. On
l
You didn't know it's a bug and proctor doesn't comment much after you
proofed to him that you have put in the neccessary commands, etc?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Why not? BAT can handle up to 9 or 10 numbers. Just exclude those unnecessary
number like voicemail pilot number, uccx...
Just click on the add sign, select "or" instead of default "and"
Sent from my iPhone
Pls pardon my fat fingers.
On Mar 4, 2011, at 12:00 AM, wrote:
> Hi All,
>
>
>
>
Because you need to call out to pstn sometimes so it matters.
Set intraregion to g729 as well and hardcode it manually in region to g711 for
calls with the same region.
It is because there's a bug involving request to gatekeeper sending wrong
bandwidth request.
Sent from my iPhone
Pls pardon
abled, Connection detects when a
call loop has occurred and rejects the call.
On Tue, Mar 1, 2011 at 10:34 PM, Ki Wi wrote:
> If i'm not wrong , it's checked by default. Unless someone unchecked it.
>
>
> Call Loop Detection by Using Extension
> Enable for Forwarded Messag
If i'm not wrong , it's checked by default. Unless someone unchecked it.
Call Loop Detection by Using Extension
Enable for Forwarded Message Notification Calls (by Using Extension)
On Tue, Mar 1, 2011 at 8:36 PM, adam compton wrote:
> I see the requirement for preventing UC to answer calls t
http://www.ciscosystems.com/en/US/tech/tk1077/technologies_white_paper09186a00800c5f67.shtml
>From troubleshooting gatekeeper bandwidth management, seems like it's
normal?
On Tue, Mar 1, 2011 at 3:52 AM, Ki Wi wrote:
> It's already changed else the initial ARQ from CM won
> Claude Friderich
>
> PreSales Support
>
>
>
> NETCORE PSF S.A.
>
> 49 rue du Baerendall
>
> B.P.65 L-8201 Mamer
>
> Téléphone: 31 33 80-407
>
> Fax: 31 33 80 8-407
>
> GSM: 621 303 616
>
> E-mail: cfrider...@netcore.lu
>
01 Mamer
>
> Téléphone: 31 33 80-407
>
> Fax: 31 33 80 8-407
>
> GSM: 621 303 616
>
> E-mail: cfrider...@netcore.lu
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Ki Wi
> *Sent:
*
>
> *[image: ccvp_voice_sm]***
>
> *NETCORE PSF S.A.***
>
> 49 rue du Baerendall
>
> B.P.65 L-8201 Mamer
>
> Téléphone: 31 33 80-407
>
> Fax: 31 33 80 8-407
>
> GSM: 621 303 616
>
> E-mail: cfrider...@netcore.lu
>
>
>
> *From:* Ki Wi [ma
destination-pattern 912123945888
port 0/1/0:23
forward-digits 0
prefix 12123945888
On Tue, Mar 1, 2011 at 3:00 AM, Ki Wi wrote:
> By default, it will end up on opening greeting when SRST user press the
> message button.
>
> Is there a way to make the users enter their own voicemail ac
By default, it will end up on opening greeting when SRST user press the
message button.
Is there a way to make the users enter their own voicemail account
directly(attempt sign in page) ?
I'm aware of a way currently which is to set the calling number to in
the hunt pilot but the method is n
what's the differences? Was reading through gatekeeper technology and saw
this term.
Seems like VIA option ( aka CUBE) is able to do what proxy is doing +
additional media/digit manipulation.
Seems like no one talks about this proxy feature anymore, is it outdated?
___
There's a famous bug around which the CM7.0.1 will use g711 for admission
request to GK , even it's set to g729
So i applied the workaround which is to set intracluster calling signalling
to g729, blah blah blah
Now if i call from UCM to PSTN-WAN GK , it will request for "bandwidth 1280"
even in H
in serviceablity page, under trace > select server > CM services > Cisco
Callmanager
turn on cm trace on h225 & gatekeeper...
For me usually if such scenario, i will go CME to turn on debug instead...
debug voice dialpeer & debug h225 asn1 is useful. Most of the time, it's
just some digits mani
Ephone- dn 1 oct
No hunt stop
Ephone-dn 2 oct
Hunt stop channel 5
Pref 1
Total 13?
Sent from my iPhone
Pls pardon my fat fingers.
On Feb 26, 2011, at 6:57 PM, Mritunjay Kumar wrote:
> Hi All,
>
> how to enable 13 party conference call in SRST for phone registered to SRST ?
>
> I guess , c
Just saw this. At the outbound dialpeer back to gk. Maybe you can try to
manipulate the called number? Provided you know the exact number to be sent to
GK.
Sent from my iPhone
Pls pardon my fat fingers.
On Feb 26, 2011, at 4:23 AM, Jay Woods wrote:
>
> hostname HQ
> !
> boot-start-marker
>
Is it a requirement to use cube to pstn-wan ? Looks like your cube doesn't have
route.
I tried cube. You need to have a inbound dialpeer to accept the call and a
outbound dialpeer back to gatekeeper.
Sent from my iPhone
Pls pardon my fat fingers.
On Feb 26, 2011, at 1:37 AM, George Goglidze w
I forgot that I have HQ as alternate gateway. However, i saw some traceback
error then rebooting the gateway resolved the issue. =(
On Sat, Feb 26, 2011 at 3:29 AM, Ki Wi wrote:
> I met a very interesting scenario...
>
> When I send a wrong number to PSTN, the PSTN switch told th
I met a very interesting scenario...
When I send a wrong number to PSTN, the PSTN switch told the gateway it's a
unallocated number. The call is not released. Both PSTN phone and My IP
phone both are still ringing. Either party can answer or hang up the call.
When connected, PSTN phone shows g711
Let's say for local call and 911 in US, the question asked you to send
calling name.
However, it's not mentioned for national call and international. If I send
calling name, am I correct or wrong?
For another case,
for certain call, i'm suppose to send via HQ and BR1 as backup for
1212394 (
shutdown the dspfarm profile and no shut it
no sccp
sccp
see whether it recovers? I always face such issue.
Do a show sccp after that, see what's the error.
On Thu, Feb 24, 2011 at 2:07 AM, Johnny Soong wrote:
> I am having issue to get the transcoder to register with the cme locally.
> When
7.0(1)
On Thu, Feb 24, 2011 at 1:39 AM, ccieid1ot wrote:
> What version of cme?
>
> duy
> ccie #27737 voice
>
> tmobile g2
> On Feb 23, 2011 11:34 AM, "Ki Wi" wrote:
> > It's my first time trying out. However one of my phones works and the
> other
&
It's my first time trying out. However one of my phones works and the other
one refuse to. The non-working phone, when i press the line button, it will
make "new call" automatically, seems to me that privacy setting is still in
effect on ephone 1 ?! I doubt that's normal. Anyone can enlighten me?
1 - 100 of 132 matches
Mail list logo
