and the other phone does not even
register ,but I have found this to be a problem in the phones config file.
Thanks
-Original Message-
From: michael.se...@compucom.com [mailto:michael.se...@compucom.com]
Sent: 28 September 2012 04:58 AM
To: ccie_voice@onlinestudylist.com
Cc: Rynard Coetzee
Hi
The phones are 7961`s ,and they don`t register. When I debug SNAP I don`t see
any SNAP messages when the GW goes into SRST.
-Original Message-
From: Chrysostomos Christofi [mailto:ch.christ...@logicom.net]
Sent: 28 September 2012 08:56 AM
To: Rynard Coetzee
Cc: ccie_voice
Hi All
I had this working previously ,but for some reason I just can`t get the phones
to push their config to the gw when in srst mode ,only one phone registers
without dn and other phone does not even register.
Below is my config :
telephony-service
srst mode auto-provision all
srst dn template
) Test SRST again
That should fix the problem, however, it might come back.
There is something wrong with the Simple Subnetwork Auto Provisioning (SNAP) on
that IOS version.
-Pablo Meneses.
On Thu, Sep 27, 2012 at 4:13 AM, Rynard Coetzee
rynard.coet...@bytes.co.zamailto:rynard.coet...@bytes.co.za
the correct SRST server ip
configuration. I am able to copy the phones cnf.xml file from CUCM using TFTP
service on the router ,but when the phones tries to load it upon boot up it
fails.
Rynard
From: Pablo Meneses [mailto:pmenese...@gmail.com]
Sent: 27 September 2012 08:07 PM
To: Rynard Coetzee; ccie
Hi All
Does anyone have any idea where I can find the List.xml file to change
background images from Cisco Documentation ? I had this question in my last lab
and I could not find the file anywhere on Cisco.
Thanks
Rynard
___
For more information
Do you know how to get to this doc using the Menus on Cisco Documentation
website ?
From: khaled Saholy [mailto:khaled_sah...@hotmail.com]
Sent: 21 March 2012 09:55 AM
To: Rynard Coetzee; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Phone backgrounds
Have a look at this link
Awesome ,thanks
From: khaled Saholy [mailto:khaled_sah...@hotmail.com]
Sent: 21 March 2012 10:33 AM
To: Rynard Coetzee; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Phone backgrounds
Voice and Unified Communication IP Telephony Unified Communication
Endpoints Cisco Unified
March 2012 09:21 AM
To: Rynard Coetzee
Subject: Re: [OSL | CCIE_Voice] Problem with dial-peers in SRST
What is configured in translation-profile outgoing 164 ?
Not sure if that is the issue but still we can have a look at it.
can you post that as well.
On Thu, Mar 15, 2012 at 4:09 PM, Rynard
I stripped the 9 on the RP on the CUCM side
From: George Goglidze [mailto:gogli...@gmail.com]
Sent: 16 March 2012 11:10 AM
To: Rynard Coetzee
Cc: vikas wankhede; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Problem with dial-peers in SRST
IOS is not using the longest match
Saholy [mailto:khaled_sah...@hotmail.com]
Sent: 16 March 2012 01:50 PM
To: Rynard Coetzee; gogli...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Problem with dial-peers in SRST
Adding to what Goerge said, In SRST mode, users will dial as in normal CUCM
mode, but we
Hi All
Another strange issue I am having ,but i`m sure I am just missing something ...
I have my SiteB in SRST mode ,when I try to make a call to a long distance
number ,it captures only the first 7 digits and then tries to send the call
,below is my dial-peers ,doing a debug voice dialpeer I
Hi All
I have a question about DSP`s and Conference Bridges ,from what i`ve read a CFB
on IOS can not share a DSP with signalling channels ,but I have a Cisco 2911
router that I use for my lab that has only one PVDM2-16 in it which I use for
the Signalling channels on my PRI and I have
Yes sorry you are correct it is a PVDM3 ,thanks for the clarification
-Original Message-
From: Farkas Péter [mailto:wormh...@sch.bme.hu]
Sent: 07 March 2012 05:44 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] DSP`s for CFB
Is it really a PVDM2
Hi All
I have a issue where my AAR is not working from HQ site to BR2 site ,I have
configured the RSVP agent and tested it ,working 100% ,I also have AAR group
,and AAR RP configured and also assigned AAR CSS to phones ,the group is also
configured under the line. I have also enabled AAR under
Hi
Yes I have it configured ,I also tried configuring the AAR mask under the line
,but still same issue
From: A A [mailto:ccie...@gmail.com]
Sent: 28 February 2012 03:41 AM
To: Rynard Coetzee
Subject: Re: [OSL | CCIE_Voice] AAR with RSVP
do you have external mask configured ?
On Feb 27, 2012 3
:
1. AAR with RSVP (Rynard Coetzee)
--
Message: 1
Date: Mon, 27 Feb 2012 11:40:53 +
From: Rynard Coetzee rynard.coet...@bytes.co.za
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Subject: [OSL
, at 5:09 AM, Rynard Coetzee rynard.coet...@bytes.co.za wrote:
I have tried all and none ,same outcome.
-Original Message-
From: Farkas Péter [mailto:wormh...@sch.bme.hu]
Sent: 23 February 2012 03:52 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: RE: [OSL
I have tried all and none ,same outcome.
-Original Message-
From: Farkas Péter [mailto:wormh...@sch.bme.hu]
Sent: 23 February 2012 03:52 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: RE: [OSL | CCIE_Voice] cBarge in CME SRST
What srst provision in your scenario
Hi All
I have an issue to get the cBarge to work when my H323 GW goes into SRST ,the
shared line shows up on both phones ,but when I have an active call on one
phone ,I don`t see the number on the other phone ,and the other phone does not
go into remote in use state when I press the shared line
Yes I have tried it under the template and under the ephone.
-Original Message-
From: Farkas Péter [mailto:wormh...@sch.bme.hu]
Sent: 22 February 2012 02:58 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
Have you tried to turn
Hi all
Does anyone have any idea why you can`t add a CTI RP to a Hunt Group ,when I
add the CTI RP the Hunt Pilot keeps giving engaged tone ,but if I add a normal
extension number it works fine ?
Regards
Rynard
___
For more information regarding
Hi all
I have the following issue which is making me pull out my hair ,I have a
Gatekeeper configured on my HQ router and H225 trunk from CUCM to GK and CME
registered to GK. Calls from CUCM to SCCP phone at CME site works 100% ,also
calls from CUCM to SIP phone at CME site works ,but when I
Hi Guys
I`m busy with Volume 2 Lab 1 and I have an issue with the AC setup ,my Always
route member has been configured and added last in the hunt list ,but when I
phone the ac pilot it sends me to the Voicemail for the member that was chosen
in the hunt list. I have created a CTI RP with number
Hi guys
I have been struggling with this problem for most of the day now ,and I don`t
know what else I can check. The MoH works if I call from HQ branch to BR1 ,but
when I call from the PSTN to BR1 I get tone on hold. I have the relevant config
on my BR1 router
Ccm-manager music-on-hold
and they are all setup correctly
,this is the reason why I am confused at this stage.
From: Gurpreet Singh Kukreja [mailto:tycoononway1...@gmail.com]
Sent: 30 November 2011 07:00 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Problem with Multicast MOH from router
But I am streaming the MoH from the branch router ,so it should not be using a
dial-peer ? Or does it still use the dial-peer as it thinks it is streaming
from the CUCM server ?
From: William Affeldt [mailto:william.affe...@yahoo.com]
Sent: 30 November 2011 08:46 PM
To: Rynard Coetzee
Cc
or are a hard set codec configured.
Sent from my iPhone
On Nov 30, 2011, at 8:12 AM, Rynard Coetzee
rynard.coet...@bytes.co.zamailto:rynard.coet...@bytes.co.za wrote:
Hi guys
I have been struggling with this problem for most of the day now ,and I don`t
know what else I can check. The MoH works if I
Phone devices and GW`s have AAR CSS set ,and the AAR group has been set on the
Device and the Line . Is it even possible to use AAR for this scenario ,to
failover between RP`s ?
From: Rrcrumm [mailto:rrcr...@yahoo.com]
Sent: 24 November 2011 05:48 PM
To: Rynard Coetzee
Cc: ccie_voice
Hi guys
I`m trying to get the following scenario to work ,but can`t seem to get the AAR
to invoke. I have 2 GW`s out to the PSTN ,they are located at HQ site and BR1
site ,what I have a RPattern that sends all calls from HQ/BR1 phones out of the
HQ GW. I then have the same RP`s created in a AAR
::StandAloneClusterNID::10.10.210.11CT::2,100,39,1.251203IP::10.10.201.51DEV::SEPFCFBFBCB5FC5LVL::ErrorMASK::0800
From: Brian Mulgrew [mailto:btmulg...@gmail.com]
Sent: 20 September 2011 04:32 PM
To: Rynard Coetzee
Cc: Geoghegan, Stuart; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Problem
.
From: Geoghegan, Stuart [mailto:stuart.geoghe...@ngbailey.co.uk]
Sent: 21 September 2011 10:14 AM
To: Rynard Coetzee; Brian Mulgrew
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Problem with CUCM and CUC SIP integration
Hi Rynard
That's interesting output
Cdpn - called
should then force it
to use the default. I might have to re-image my CUCM.
Thanks to Stuart for pointing me in the right direction :)
From: Geoghegan, Stuart [mailto:stuart.geoghe...@ngbailey.co.uk]
Sent: 21 September 2011 10:14 AM
To: Rynard Coetzee; Brian Mulgrew
Cc: ccie_voice
the MVA application
to establish which CFB to use. Well that is my thinking anyway ,I might be
wrong.
-Original Message-
From: Amit Singh [mailto:batraji...@yahoo.com]
Sent: 19 September 2011 11:00 PM
To: Ashraf Ayyash
Cc: Rynard Coetzee; ccie_voice@onlinestudylist.com
Subject: Re
.
From: Geoghegan, Stuart [mailto:stuart.geoghe...@ngbailey.co.uk]
Sent: 20 September 2011 12:44 PM
To: Rynard Coetzee; ccie_voice@onlinestudylist.com
Subject: RE: Problem with CUCM and CUC SIP integration
Hi Rynard,
What is your Region setting within your device pool for your SIP trunk?
What
might as well be in
French or something as I have no idea how to decipher them .
-Original Message-
From: Ashraf Ayyash [mailto:ash.ayy...@gmail.com]
Sent: 20 September 2011 01:24 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Problem with CUCM
Yes ,Voicemail route pattern is in None partition
From: Geoghegan, Stuart [mailto:stuart.geoghe...@ngbailey.co.uk]
Sent: 20 September 2011 01:11 PM
To: Rynard Coetzee; ccie_voice@onlinestudylist.com
Subject: RE: Problem with CUCM and CUC SIP integration
HI Rynard
Does your line forwarding CSS
CUCM will go through them and see if I can pick
up anything
From: Geoghegan, Stuart [mailto:stuart.geoghe...@ngbailey.co.uk]
Sent: 20 September 2011 01:54 PM
To: Rynard Coetzee; ccie_voice@onlinestudylist.com
Subject: RE: Problem with CUCM and CUC SIP integration
But do you actually have a CSS set
Hi
I have issue to get cBarge to work when dialling in via my MVA number. When I
dial the MVA number and then start a new call to my HQ phone ,my Branch 2 shows
the Remote in Use ,but when I try to Cbarge into the call ,I just get a
fastbusy. I have Hardware conference bridge setup for both HQ
...@gmail.com]
Sent: 19 September 2011 02:25 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] cBarge problem using MVA
Hey Rynard ,
as you are using Cbarge , there is no need for Built in Bridge , you will need
have the privacy off and the barge method
Hi All
I have a problem with my Unity Connection and Call Manager Express integration
,when I dial the voicemail pilot number from the CME phone the call disconnects
immediately and I get the following SIP error :
SIP/2.0 503 Service Unavailable
From: BR2Ph1 sip:3001@10.10.202.1;tag=48903C64-605
-Original Message-
From: Ashraf Ayyash [mailto:ash.ayy...@gmail.com]
Sent: 05 September 2011 02:22 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Problem with UC and CUCME integration
please get full ccsip mess for one of the calls please
On Mon
.
-Original Message-
From: Ashraf Ayyash [mailto:ash.ayy...@gmail.com]
Sent: 05 September 2011 03:16 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Problem with UC and CUCME integration
Hello ,
the CME is sending 2 invite to the CUC and the CUC havnt
43 matches
Mail list logo