:45 AM
To: Krishna
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] LAN Qos questions
Hi Krishna,
sounds good so far. But as I said when COS 5 is the only COS in Queue 1,
which Traffic/COS could fill T1 and T2 up to 100% when COS 5 is only mapped
to T3?
Regards
The requirement is as follows on Lab 2 QOS section of the 5-Lab Handbook. For
traffic being sent to the Site A gateway ensure that the traffic marked with
COS 5 is dropped if the queue 1 is 75% full
The Solution guide (page 408) has the following solution.
mls qos queue-set output 2 threshold
I noticed this and I believe it is a typo further evidenced by the note next to
the command that says something to the effect that that command moves it to q1t1
Sent from my iPhone
On Oct 20, 2012, at 2:17 AM, Pixar Perfect pixarperf...@live.com wrote:
The requirement is as follows on Lab 2
I have this seen this also, to be honest I think it shouldn't matter
whether it is in threshold 1 or 3 as long as no other COS is in same
Threshold of queue 1 of queset 2. When you leave in in threshold 3 I think
you should be fine with:
mls qos queue-set output *2* threshold 1 100* *100* 75
.
From: Steffen Bruening stbruen...@gmail.com
To: Pixar Perfect pixarperf...@live.com
Cc: ccie_voice@onlinestudylist.com
Sent: Saturday, October 20, 2012 6:38 PM
Subject: Re: [OSL | CCIE_Voice] LAN Qos questions
I have this seen this also, to be honest I think
stbruen...@gmail.com
*To:* Pixar Perfect pixarperf...@live.com
*Cc:* ccie_voice@onlinestudylist.com
*Sent:* Saturday, October 20, 2012 6:38 PM
*Subject:* Re: [OSL | CCIE_Voice] LAN Qos questions
I have this seen this also, to be honest I think it shouldn't matter
whether it is in threshold 1 or 3
