Mine were 15x8 with 5" backspacing, steel rallys,
10 hole lug pattern, raw. Delivered to me for under $150.
Devin
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Tuesday, May 09, 2006 7:48 AM
Subject: Re: [Chevelle-list] Pete Paulsen
RJ
Does the th350 take the same yoke as a 400? I
dont think they do but I dont know
Thanks
Ryan
I have a th350 yoke -rj
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Ryan Langstraat
Sent: Monday, May 08, 2006 8:04 PM
To: Chevelle Chat Forum
Subject: [Chevelle-list] Parts
needed
I was wondering if any of your guys had these parts you
would be willin
And here is an eBay pulley : http://cgi.ebay.com/ebaymotors/88-92-Camaro-Firebird-TPI-TBI-Smog-Pump-Delete-Pulley_W0QQcmdZViewItemQQcategoryZ38656QQitemZ8063913141QQrdZ1QQsspagenameZWDVW
On 5/9/06, Rick Schaefer <[EMAIL PROTECTED]> wrote:
Try this from thirdgen.org
http://www.thirdgen.org/ser
Try this from thirdgen.org http://www.thirdgen.org/serpentine In the frontal picture, the smog pump is missing on the lower passenger side. You can order a smog delete pulley that will put a slight bend in that long belt run from the balancer to the A/C compressor.
On 5/9/06, [EMAIL PROTECTE
Yes,the Lakeland Airport. Don't remember the B-17
but it's been 1998 since I was there.
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom bagger For Salehttp://dalesplace.com/misc/friends/clint/clint_hooper.htm"You
may find me dead one day in a ditch. But by God,you'll
Small world Clint. I used to go to Lakeland
regularly to watch minor league hockey. Nice area. Is it that airfield just off
of I-4 where they have an old B17 (I think) on static display?
Larry Shouse
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Yes,sir. 6 cylinders, 24 valves,and 6 carbs. I was
National Director for the International CBX Owners Assoc. from 1986 to 1997.
Owned probably 25 of those things and still have some cool
paraphenalia.
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom bagger For Salehtt
Clermont,huh? I used to attend the EAA airshow at
Lakeland for many years,Larry.
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom bagger For Salehttp://dalesplace.com/misc/friends/clint/clint_hooper.htm"You
may find me dead one day in a ditch. But by God,you'll find me
No spelling police on this board that I'm
aware,Mike. Looking forward to
seeing you at Chevellabration in a few weeks.
Clint HooperH&H Custom,owner1969 El
Camino protourer2001 H-D FLHR custom bagger For Salehttp://dalesplace.com/misc/friends/clint/clint_hooper.htm"You
may find me dead one d
Hey Clint,would that be the six cylinder
motorcycle from the late seveties ? Jimmy C.
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Tuesday, May 09, 2006 8:13 PM
Subject: Re: [Chevelle-list] OT - Car
Sale Question
I wouldn't trus
Yep,they do. That makes their credibility
just a little suspect in my book.
I've never had an issue with eBayyet. Came
close a few times,though. But,it only takes one time.
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom bagger For Salehttp://dalesplace.com/misc
Clint, I tried to send the link through eBay to the
list, but that seems to have failed. Here's the link.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4637622639&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1
Larry
- Original Message -
From:
Clint Hooper
To: T
whoops, make that: " I guess I wasn't awaRE". yeeshhh, it's my
first day typing.
--
I would rather live my life as if there is a God, and die to find out there isn't, Than live my
life as if there isn't, And die to find out there is. -author unknown
Ten Commandments -- The re
They do? I guess I wasn't away. Either way, 5 years of using PayPal
for purchases and sales, and never have had an issue.
--
I would rather live my life as if there is a God, and die to find out there isn't, Than live my
life as if there isn't, And die to find out there is. -author unknow
Can you post a link to the auction?
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom bagger For Salehttp://dalesplace.com/misc/friends/clint/clint_hooper.htm"You
may find me dead one day in a ditch. But by God,you'll find me in a pile of
brass."
- Original
What would you expect eBay to say about
paypal,Mike? They own it,don't they? Sorry but
I'll trust my personal banker any day of the week over two entities that have
screwed people numerous times.
It's your money,though.
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom
Item number 4637622639
- Original Message -
From:
[EMAIL PROTECTED]
To: The Chevelle Mailing List
Sent: Tuesday, May 09, 2006 8:37 PM
Subject: Re: [Chevelle-list] OT - Car
Sale Question
Give us a listing number or a link, Larry. I'd like to see
it.
-Origin
Give us a listing number or a link, Larry. I'd like to see it.
-Original Message- From: Larry Shouse <[EMAIL PROTECTED]>Sent: May 9, 2006 7:44 PM To: Chevelle List Subject: [Chevelle-list] OT - Car Sale Question
I have a 1950 Studebaker listed on eBay for sale. An eBay member contacted
I have a 1968 138VIN Chevelle SS body available for
sale:
The body has no front clip, no trunk lid, and the
doors on it now are 69 doors needing new skins. It's been mini tubbed and floors
and trunk area has had patch panels put in, and rear quarters patched in. Needs
some welding done, bu
I'd have to disagree with Clint, I've used PayPal for a lot of sales
(as much as $4,000 per sale) for several years, and I've never had an
issue. And Ebay discourages the use of cash or cash wire transfers.
I lifted this from their site at
http://pages.ebay.com/help/pay/payment.html
Important
Heya,
I'm trying to piece together a serpentine system, and I'm having a heck
of a time figuring out the routing and placement of the accesories. I
have just a power steering pump and alternator, as well as the water
pump, crank pulley, and tensioner. The p/s pump is low on the driver's
side,
Thanks Clint. I think a wire transfer really makes
good sense.
Larry
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Tuesday, May 09, 2006 8:13 PM
Subject: Re: [Chevelle-list] OT - Car
Sale Question
I wouldn't trust paypal as fa
I wouldn't trust paypal as far as I could
spit,Larry. An electronic wire transfer of funds with your banker involved
in the process is the only way I would proceed. Sold a turbo CBX Honda to a
customer in Western Australia awhile back and that's how I handled that
transaction.
That way,you
Good point. I may ask him for a wire
transfer.
Larry
- Original Message -
From:
[EMAIL PROTECTED]
To: The Chevelle Mailing List
Sent: Tuesday, May 09, 2006 7:56 PM
Subject: Re: [Chevelle-list] OT - Car
Sale Question
There is a 45 day period that people can rev
There is a 45 day period that people can revoke the
Paypal payments. I would tell him as soon as the 45 day period is up, then
you'd ship it.
www.65ss.com
Charles
- Original Message -
From:
Larry Shouse
To: Chevelle List
Sent: Tuesday, May 09, 2006 6:44 PM
Subjec
I have a 1950 Studebaker listed on eBay for sale.
An eBay member contacted me saying he is from Norway, and would like to bid on
the car. He has 40+ positive feedbacks and no negatives, and is willing to pay
for the car through Paypal in full, and will hire a car transport company to
pick up
oil psi starts off at about 70psi until it warms up then stayed at 60 psi.
I will have to contact the machine shop for the clearances. Jimmy C.
- Original Message -
From: "Herb Lumpp" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List"
Sent: Tuesday, May 09, 2006 4:23 PM
Subject: Re: [
I was wondering if anyone knew if you can still use your cowl induction air
cleaner if you use an Edelbrock dual-plane intake manifold (performer RPM) with
a Holley carb instead of the factory single-plane one? Will there be enough
clearance? If not, what if I did not re-use the factory spacer
I was wondering if anyone knew if you can still use your cowl induction air
cleaner if you use an Edelbrock dual-plane intake manifold (performer RPM) with
a Holley carb instead of the factory single-plane one? Will there be enough
clearance? If not, what if I did not re-use the factory spacer
You said it was a fresh rebuild, what were the main and rod clearances?
What's the oil pressure do while you're driving?
Herb Lumpp
http://users.adelphia.net/~hlump/index.htm
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, M
Electric guage...no kinked line. But you may have put teflon on the
sender threads...a piece of that in the sender can make the guage read
as low as 0. I keep a spare mechanical guage around just to test
things. Hopefully it is the guage or sending unit.
Walt
- Original Message -
Fr
Go with Eddie..we had the same problem & it turned out to be a pinched oil line to the guage, I cut off the bad section ,reinstalled & it worked great.
Mikey
---Original Message---
From: Eddie Bumgarner
Date: 05/09/06 15:31:17
To: The Chevelle Mailing List
Subject: Re: [C
Check you gauge first, sometimes the gauge will be defected then check your oil pressure with another gauge, if it still remans low then seek professional help. It could be inside your oilling passages. good luck Eddie 66ss conv."Jimmy C." <[EMAIL PROTECTED]> wrote: I put the chevelle on
I would hook up a mechanical gauge and check it
before I got to worried.
Trooper
- Original Message -
From:
Jimmy C.
To: Chevelle Forum
Sent: Tuesday, May 09, 2006 2:23 PM
Subject: [Chevelle-list] LOW OIL
PRESSURE
I put the chevelle on the road last
thur
I put the chevelle on the road last
thursday ,been driven around town I put about 75 miles freash rebuild,
454ci mild comp cam ,easy miles (3500rpm max) with 4 speed trans, everything was
great. went to put it into the garage and noticed about 12 psi on the oil
pressure gauge. shut it off th
Two quick
questions:
Is a "combination valve" the same thing as a proportioning
valve?
Would a combination valve for a 1974 Malibu w/ front disc
& rear drums (part# 172-1351) fit a 1969 El Camino? There is also a
separate listing for the Malibu Classic (part# 172-1354).
Thanks
Tell us more about your wheels,Devin. What
backspacing did you get? What was the cost?
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom bagger For Salehttp://dalesplace.com/misc/friends/clint/clint_hooper.htm"You
may find me dead one day in a ditch. But by God,you'll f
That's a great story!!! Congratulations, you won one.
-Original Message-
>From: "D.R. Jones" <[EMAIL PROTECTED]>
>Sent: May 8, 2006 4:18 PM
>To: "chevelle-list@chevelles.net"
>Subject: [Chevelle-list] Phoenix Transmission
>
>Read the following and you will see why I am so high on Phoenix
Ditto Mike ?? Why the addition of a Tach meter either included or stand
alone is needed to map out both the vacuum and mechanical in Degrees and at
what RPM.
You are able to verify " initial " timing setting with the dial back
advance set to your desired degree and strobe flash at the DTC 0 d
Whats the model number of this critter?
-Original Message- From: "Jim H. Thompson" <[EMAIL PROTECTED]>Sent: May 8, 2006 8:27 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Timing Light
0
DocumentEmail
I have a craftsman light that lets you
That's one trick timing light! How does it know
what the mechanical advance is at idle? The way my dial up light works is you
dial the desired timing, you bring the engine RPM up past where your mech.
advance is all in (on my engine it is 2800) and you adjust the dist. until
the mark on the
42 matches
Mail list logo
