I may have one. This is for the small (10.4") clutch/flywheel, right? I
took off a 3858403 when I swapped to the larger clutch and I think I still
have the old one. It is in pretty good shape with some really minor cracks.
Assuming it is still in the garage, here are pictures I too of it after I
I sent you
an e-bay listing that has very good pictures for what your are looking for.
-Original
Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On
Behalf Of [EMAIL PROTECTED]
Sent: Thursday, May 11, 2006 1:38
AM
To: Chevelle-list@chevelles.net
Subject: [Chevelle-list]
Joe, no numbers that I see unless I am not looking in the right place. I can tell you the flywheel that was on the truck was a 14". I have the complete shot clutch, pressure plate and flywheel on a shelf with the bellhousing. Hope that helps. Carl
Blab-away for as little as 1¢/min. Make
Carl,
Any #'s stamped on the Bellhousing?
Joe
Joe, I don't know the number of the bellhousing but it came off a 79 C10. Sounds good on the brackets, let me know. Carl
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.
I already ordered the bellhousing today, your truck bellhousing is it a 661??
If you wait some guy next week wants my 350 engine if he doesn't take the brackets which I think he will not, then I will be glad to sell you my brackets
Joe P.
Joe, I will trade you even up a truck bellhousing for the AC bracket you have that I need. Let me know.
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
Thanks guys as usual with all your help...
All I have to say is that you guys are always there with help...
Thanks again group.
Joe P. -Original Message-From: John <[EMAIL PROTECTED]>To: The Chevelle Mailing List Sent: Thu, 11 May 2006 17:03:43 -0500Subject: Re: [Chevell
You can use the truck bellhousing (much cheaper)
and get a spacer for the transmission bearing retainer. I got one from the
following and it works great!
Dennis Wayne McLeodToolcraft Co., Inc.Cell 502-558-1043Office
502-222-5764FAX 502-222-5942
I think that the total including S & H was
$28
Joe, I think the after market is
reproducing them. check year one, ground up etc.. I seen an O.E one at
englishtown swap a couple weeks ago guy was asking $250. good luck,
Jimmy C.
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent:
You don't need to have a 621 bellhousing, you can use a 444 casting as
well. Dig deep if you are after a 621 housing. You can use a truck
bellhousing also, you just need a bushing on the bearing retainer since the hole
is a bit bigger.
Tom
I have a bellhousing #460486 I was told it was a
truck bellhousing ,but I would like to use it in my 72.with an 11'' inch
clutch. is there any reason why I can't or shouldn't use it? thanks
Jimmy.C
- Original Message -
From:
Bill
Lessenberry
To: The Chevelle Mailing Lis
he same
> size opening in bellhousing.
> Maybe I should look for that.
> Might be that behind a 250 they didn't bother with a big
> housing.
>
> Pete
> >
> > From: Michael Pell <[EMAIL PROTECTED]>
> > Date: 2005/05/10 Tue AM 09:15:12 EDT
> >
>
> From: Michael Pell <[EMAIL PROTECTED]>
> Date: 2005/05/10 Tue AM 09:15:12 EDT
> To: The Chevelle Mailing List
> Subject: Re: [Chevelle-list] BELLHOUSING
>
>
> The typical pick-up truck (1/2 ton, 3/4 ton) with a 4sp behind a
> typical SBC/BBC have a larger beari
> To: "The Chevelle Mailing List"
> Sent: Tuesday, May 10, 2005 9:15 AM
> Subject: Re: [Chevelle-list] BELLHOUSING
>
>
> >
> > The typical pick-up truck (1/2 ton, 3/4 ton) with a 4sp behind a
> > typical SBC/BBC have a larger bearing retainer opening (5&quo
THANKS MIKE. JIMMY.C
- Original Message -
From: "Michael Pell" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List"
Sent: Tuesday, May 10, 2005 9:15 AM
Subject: Re: [Chevelle-list] BELLHOUSING
>
> The typical pick-up truck (1/2 ton, 3/4 ton) with a 4sp
bit.
Mike
Quoting [EMAIL PROTECTED]:
> > From: Michael Pell <[EMAIL PROTECTED]>
> > Date: 2005/05/09 Mon PM 06:07:48 EDT
> > To: The Chevelle Mailing List
> > Subject: Re: [Chevelle-list] BELLHOUSING
> >No, the truck bell won't work directly. You&
> From: Michael Pell <[EMAIL PROTECTED]>
> Date: 2005/05/09 Mon PM 06:07:48 EDT
> To: The Chevelle Mailing List
> Subject: Re: [Chevelle-list] BELLHOUSING
>No, the truck bell won't work directly. You'll for sure >need an adapter ring.
What's bigger?
The
anks Jimmy.
CO
- Original Message -
From:
Brad Waller
To: 'The Chevelle Mailing List'
Sent: Monday, May 09, 2005 6:24 PM
Subject: RE: [Chevelle-list]
BELLHOUSING
The 6263756 is a 12" truck
housing. The transmission may not bolt up to that one! You w
The 6263756 is a 12" truck housing.
The transmission may not bolt up to that one! You want a 3872444, 3899621, or 464697.This site has more
info that I will ever remember:http://www.tracyvette.com/bellhousings.html
They are expensive, as you should be able to find one for a lot less than
t
No, the truck bell won't work directly. You'll for sure need an
adapter ring.
Here's some more info:
http://www.5speedTransmissions.com/techref.html
See item #30, and notice the 2 links.
McLeod does sell and adapter ring, but your bearing retainer will require some machining to create a step
/El Camino Specific Midwest Chevelles – Midwest Chevelle Show Information
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
TigerguttSent: Tuesday, October 07, 2003 11:31 AMTo:
'The Chevelle Mailing List'Subject: RE: [Chevelle-
. oktober 2003 01:52
To: 'The Chevelle Mailing List'
Subject: RE: [Chevelle-list]
bellhousing
Ok. Edmond is just up the road. You can see everything
off the car at http://www.dalesplace.com/forsale/trans.htm.
I missed getting a few bolts (trans to bellhousing comes to mind). All
i
:
Dale McIntosh
To: 'The Chevelle Mailing List'
Sent: Sunday, October 05, 2003 2:24
PM
Subject: RE: [Chevelle-list]
bellhousing
Dang. If you were pretty
close to Oklahoma, you wouldn't have to round up much at all. I just
too
Title: RE: [Chevelle-list] bellhousing
u Dale, email me, I'm in Edmond and might be
interested.
Bill B.67 MalibuEdmond Oklahomahttp://groups.msn.com/SpidrManspics/mycar.msnwhttp://autos.groups.yahoo.com/group/chevellerestoration/
- Original Message -
From:
Dale McI
Title: RE: [Chevelle-list] bellhousing
Dang. If you were pretty close to Oklahoma, you wouldn't have to round up much at all. I just took my 4-speed out of my 67 SS and am selling it all - M20, Hurst, pedals, flywheel, clutch/disc, fork, bellhousing...everything.
Dale McIntosh
TC
http://www.novak-adapt.com/knowledge/chevy_big_block_v8.htm
OK check out this link all info probably most chevy people don't know, sorry
to all of you guys that know this is common knowledge
Ps and best of all this is a Jeep to Chevy swap link
- Original Message -
From: "Gene Zuccaro" <[EM
D]]On Behalf Of Herbert Lumpp
Sent: Sunday, February 02, 2003 5:01 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] Bellhousing bolt question
Ron,
The bolts are 1/2 course thread, and 1.5" long measuring from under the
head.
cYa-
Herb Lumpp
1966 El Camino
ACES 3509, MCC 528
http:
day, February 02, 2003 4:11 AM
Subject: Re: [Chevelle-List] Bellhousing bolt question
> > Anyone happen to know what the size/length the four bolts are that go
> into
> > a bellhousing from a muncie 4 speed?
> >
> >
> > thanks
> > Ron
> >
> > My
Ron,
I have been looking until now but I cant find the bolts. I'm sorry !
Kind Regards
André
- Original Message -
From: "Cutter169" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 02, 2003 6:05 AM
Subject: [Chevelle-List] Bellhousing bolt question
> Anyone happen to k
Ron,
I have them somewhere but dont where I thought they where so I'll see if I
can find them and get back to you.
Kind Regards
André
- Original Message -
From: "Cutter169" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 02, 2003 6:05 AM
Subject: [Chevelle-List] Bellhou
Thanks! ANd Thanks Steve for your info as well. Learn something new every
day!
Josh Gin (NoNeck) Visit my Chevelle website www.NoNecksChevelle.com
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, August 17, 2002 5:36 AM
Subject: Re: [C
Josh
This site has some bellhousing numbers listed. It has the 486 listed as a 12"
truck bellhousing.
http://www.tracyvette.com/bellhousings.html
-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMA
Steve
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of NoNeck
Sent: Friday, August 16, 2002 10:39 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] Bellhousing question...
Duh. Yeah, I did mean the 621 Kurt. The auc
To: <[EMAIL PROTECTED]>
Sent: Friday, August 16, 2002 7:03 PM
Subject: Re: [Chevelle-List] Bellhousing question...
> In a message dated 08/16/2002 12:42:54 PM Eastern Daylight Time,
> [EMAIL PROTECTED] writes:
>
> > All the ones on ebay are 681's, but this is part numbe
In a message dated 08/16/2002 12:42:54 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> All the ones on ebay are 681's, but this is part number 460486. Anybody
know
> anyhting about this bell? I thought only the 681's were for the big clutch,
> but this one looks almost identical to the
36 matches
Mail list logo