Hello all,
I am very sorry to bother you good people with my
query which is not realted to studies, but I can't
seem to find any information about how to setup a
cybercafe. I would be very grateful if you are kind
enough to point me where I can find independent info
apart from ISPs.
1) Wha
Yes, it's true.
""computer services"" <[EMAIL PROTECTED]> wrote in message
news:002601bfb8ef$9614bfe0$0203@scsi...
Hi there
i m working on ccnp cert which is going to
expire on 31st July 2000
some body told me that if i could not complete
till 31st , still i can comlete it
Hi there,
Could anybody help me out as to what I should concentrate on for the CCNA
1.0 Exam.
Also how much in depth do I need to know the IOS commands.
Thanks in advance.
Glenn
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list ar
Has anyone setup a L2TP tunnel between a Windows2K
machine and a Cisco router? The new vpn s/w in Win2K
seems to be a really nice add-on, but all of the L2TP docs
that I can find on Cisco show the normal setting up an
Access Server to remote router. Is this even possible?
TIA
DH
___
I am the same way, just sit back and learn the material. This issue (and
many others recently)can be resolved off the list. The DELETE key is tired--
let it rest.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 08, 2000 11:16 PM
To: [EMAIL PROTECTED
Is there a study group on Long Island I could be a part of?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTE
1. What is HOST is it Hostname? or Server? or Network Address?
2. Where can i use queuing - Can i use queueing in WAN LINK? or Drop
packets? or Bandwidth ?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subsc
How can I copy a 1900 firmware to a tftp server...I used copy nvram
tftp://tftpserver/filemane but It upload just the running config??
Thanks
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription
hey folks no flames huh . I know it's real world but it will help me out
and this is a real project so we can all learn from this.
once I finish the proposal I will throw it on a web site for all to see
Ok all the design wannabes
Customer has TI 2501 old Vinca T1 ds/csu 36 ports ( only
Sorry if this is a little off topic, but seeing the most recent posts
Is anyone willing to part with thier CMTD course book? I have the following
original courseware to trade:
Checkpoint Certified Security Adminsitrator
Solaris Certified Administrator
(Sniffer U) TCP/IP Concepts and Trouble
I'm located in Jamaica, NY. I've been pondering whether to inquire about
any study groups in the Queens, LI area. If there are any study groups in
this area, I would be happy to be a part of it. I've recently completed the
ACRC exam and I'm preparing for BCRAN. If anyone is interested in formi
Title: VLANs and 2924XL
Hello all,
I have a VLAN question that CCO hasn't been able to help me with as yet. I have two 2924XL switches in my lab and a 3661 router. I want to set up VLANs on the switches. The problem, I think is that the switches are running standard edition software. IS
Duane C Whitlow & Co leases equipment (usually for study purposes, but I
doubt they'd turn down a business use). Contact Conrad.
http://www.dwc-computer.com/
HTH
Annlee
"Ross Bernardo" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Hello gentlemen,
>
> Can you please direct me
Zim,
If you want, send me the config direct. I suspect that since you can ping,
that either the conduit or NAT config is incorrect and that routing is fine.
Here's some things to check.
Check the security level on the interfaces, Outside should be Sec0, and the
Inside - Sec100.
Does your NAT p
Title: Montana Study Group
Are there any people out there in the Northwest Montana area interested in starting a study group? I am in Kalispell...
Mike
===
Michael S. Kazmier
Director of Network Services
Binocs Systems Corporation
"Bringing it all
We use Modem pooling with the 3640,
30 Digital modems, via an E1 PRI
automatically detect
ISDN or POTS dialin or dial out.
RADIUS Authentication via Novel BorderManager
Download the Dial up Utility from Cisco:
http://www.cisco.com/kobayashi/sw-center/access/dialout-planner.shtml
Watch the Wrap
Glenn,
OSI model, access lists, OSI model, IP subnetting, OSI model.
You can get the exam objectives here:
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/ccna_407
.pdf
Did I mention the OSI model? ;-)
Good luck,
Pat
Pat Talbot, CNE,CCNA,CCDA
-Original
Correction: The CCNA 1.0 is fine for the CCNP
2.0--as long as all the CCNP exams are 2.0. From the FAQ:
10) I am CCNA 1.0 certified, may I continue to
pursue CCNP 2.0 certification?
Yes, you do not need to take the CCNA 2.0 exam
for CCNP 2.0 certification.
Also, see here (mind the wrap)
I think $800 is an average price. I paid about $1200 for mine from MSI. Poor
service, too. I ordered, then the guy went on vacation and didn't send them
(2) until I called someone else. To check prices, go to www.ebay.com then
search for Cisco 2501. After you see a list of them just click on Searc
Actually what I am looking for is a study group for CCNA 2.0 on Long Island.
> -Original Message-
> From: Jeffrey Klein
> Sent: Tuesday, May 09, 2000 7:45 AM
> To: '[EMAIL PROTECTED]'
> Subject: Hello
>
> Is there a study group on Long Island I could be a part of?
__
Looking for individuals that woudl like to devote some time in advancing
their skills in a group atmosphere . I have access to 2500's and cat 5000's
and numerous others. Looking for people in the imediate vicinity . Anyone
out their let me know
__
for performance : 3620
for # of slots : any of cisco(except 4xxx & 7xxx), 6520 has 8 slots,
6520 has no built-in ethernet card but it has 4 built-in v24 DCE ports and
no cost selectable ports (v.35, v.36, v24, v.11)..
-Original Message-
From: WW [mailto:[EMAIL PROTECTED]]
Sent: Monday, M
Does anyone have a sample config for a PIX firewall with client VPN running?
I'm trying to set up a test PIX with sw 5.03 and the Cisco Secure VPN client.
I need a config that works. Please just email it to me (please replace any IP
addresses and names with 's to protect the confidentiality).
When connecting to the console port with the cisco cable, I get the prompt
ATwhat does that mean, and how do I get back to the menus??. All the
terminal settings are correct.
Thanks in advance
Andrew Larkins
Usko Communications
Tel: +2711 236-8000
Fax: +2711 236-8350
Cell: +2783-656-7214
E
http://www.cisco.com/pcgi-bin/lm/buffer/offer/1700routers/b2/1309_jump_b2/d8
53-000xx
this one is Voice & Data Internetworking
Annlee
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.
How much memory and what version of IOS (Firewall feature set) is needed
to use VPN and NAT on a 2600 series. I have about 200 internal connections.
thanks
___
To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
Hi,
You'll have to select some Cisco hardware which best suits customer
requirement without any help, regards,
Sebastien CCNA, CCDA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Oladele Ayuba
Sent: Monday, May 08, 2000 9:22 PM
To: [EMAIL PROTECTED]
Su
By aby chance anyone of you received their results on the exam?
I took the test at the end of March and still no news.
Is this meaning that I failed it?
Thx.
Bye.
Mihai Iancu
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list a
Can anyone give me a sample config using a 2600 with
the firewall set and the Cisco VPN client software?
__
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
___
UPDA
Has anyone seen/used any of the McGraw -Hill books? Specifically :
Cisco IOS IP Field Guide
Cisco Router Handbook
BCRAN
Cisco Access List Field Guide
If you have used any of these, what did you think? Worth adding to the
library in preparation for testing?
Having Much Too Much Fun,
Will Sahli
Sorry, It is only available in Canada.
Cisco University 2000 Switching Solutions III
http://www.cisco.com/pcgi-bin/sreg2/register/regdetail_private.pl?PRIORITY_C
ODE=SCA651-1&LANGUAGE=E&METHOD=E
*watch the wrap*
It is kind of late but there is still space open
Albert
__
I haven't received any results on the exam yet either. I called Cisco
yesterday and was told they are running behind on getting the results back,
so on and so on. She took my information and told me that they're test
administrator would get back to me by phone or e-mail within 24 hours with
an a
CCNA 2.0 should be available 8 weeks after end of exam. That means by May
15 or so. Might take longer, though.
Be patient. Go to http:\\www.galton.com\~cisco for exam results.
Bob
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
iancu mihai
Sent: Tuesd
Thanks for the correction Annlee.
"Annlee Hines" <[EMAIL PROTECTED]> wrote
in message 8f9384$ld4$[EMAIL PROTECTED]">news:8f9384$ld4$[EMAIL PROTECTED]...
Correction: The CCNA 1.0 is fine for the CCNP
2.0--as long as all the CCNP exams are 2.0. From the FAQ:
10) I am CCNA 1.0 cer
I thought this was a pretty cool link
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ita/
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___
UPDATED Posting Guidel
The books available now pertaining the the subject line, are they "good" for
CCNP v2?
Rob Montgomery CCNA MCP
IA Systems Analyst
Sytex, Inc./ Naval Special Warfare Command
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives
Can someone point me to a reference on how to
configure sub interfaces?
Aaron Custer
Here is an odd question
could one connect a pair of routers back to back using csu/dsu's?
Basically from router A, s0 connect via v.35 to a csu/dsu
and from router b, s0 connect via v.35 to a csu/dsu
then connect the csu/dsu's back to back somehow?
___
Here are some examples with Frame Relay (watch for word wrap) :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios103/rpcg/79086.h
tm#xtocid844938
HTH, Ole
~
Ole Drews Jensen
Systems Network Manager
MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECT
I know there was a recent discussion on how to disable outbound telnet
seesions from a router. I am looking for how to disable telnet service so
that when I run a port scan on a router, 23 doesn't show up.
I thought this would be easy to find but I am unable to find it!
Thanks.
_
Title: RE: disable telnet service on a router
I think you will have to use the "transport input none" command in vty 0 4 or whatever virtual line it is. It will block all incoming telnet connections attempted by a host. I haven't tested it with a port scanner so give it a try!
David Luong, C
I have 2 routers in a remote site. They are configured as a primary and a
backup using HSRP.
The primary has several serial attached SDLC devices that connect to a host
at the central site using SDLLC. The primary conncts to the central site
using a T-1 link. The primary and backup routers bot
What percentage of the questions are fill in the blank?
Thank
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PR
Can do! On the telco side CSU/DSUs have either an 8-pin RJ-45 type jack or a
15-pin D type connector.
If an RJ-45:
T-1s use pins 1&2 and 4&5. 56k lines use pins 1&2 and 7&8. So for a T-1 to
go back to back swap 1&2 with 4&5 and 4&5 with 1&2. I take a two port (jack)
surface mount box and make t
yeah1..thanks hun!! =)
Annlee Hines wrote:
> http://www.cisco.com/pcgi-bin/lm/buffer/offer/1700routers/b2/1309_jump_b2/d8
> 53-000xx
>
> this one is Voice & Data Internetworking
>
> Annlee
>
> ___
> UPDATED Posting Guidelines: http://ww
Re using back-to-back CSU/DSUs:
> From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
> Can do! On the telco side CSU/DSUs have either an 8-pin RJ-45
> type jack or a 15-pin D type connector.
>
> If an RJ-45:
> T-1s use pins 1&2 and 4&5. 56k lines use pins 1&2 and 7&8.
> So for a T-1 to
> go bac
>
> could one connect a pair of routers back to back using csu/dsu's?
> Basically from router A, s0 connect via v.35 to a csu/dsu
> and from router b, s0 connect via v.35 to a csu/dsu
> then connect the csu/dsu's back to back somehow?
Yes, it is possible, no problems. Just config one csu/dsu to
Also , for # 2 , if a correct LECS address is specified and for some reason
the major interface it is configured on is down
the entire LANE cloud will be down. Also, on some IOS revisions if ILMI is
used for learning ATM NSAP prefixes and someone,possibly an engineer from
Cisco Systems, accidental
yes you can, I have a 2524 and a 2525 both with internal 56k csu/dsu
connected with a rj45 crossover cable. It was easy to setup and it works
great.
Your mileage may vary depending on the equipment you have
daveh
-Original Message-
From: Timothy C. Medley [mailto:[EMAIL PROTECTED]]
Sent
You should check in eBay, and you should now if you want an enterprice
or standard IOS version. I thing that a price range between $650 to $850
is a good price but again, an enterprice version with 16 Mb flash might
cost more.
-Original Message-
From: tayta [mailto:[EMAIL PROTECTED]]
Sen
if you look back through the previous postingsw some people have post
links to informative web sites
tayta
Glenn wrote:
> Hi there,
> Could anybody help me out as to what I should concentrate on for the CCNA
> 1.0 Exam.
> Also how much in depth do I need to know the IOS commands.
> Thanks in a
Title: RE: Alternative Back to Back connection
Here is the pinouts for T1 crossover cable that I am using in my lab...
T-1 crossover:
1 4
2 5
3 3
4 1
5 2
6 6
7 7
8 8
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
>One thing to watch out for is that you may have to set one
>CSU/DSU to 'clock internal' and the other to 'clock loop'
>(or the same effect, in slightly different phrasing...)
>
>Without this - and in the absence of clock from the telco
>switch - the two boxes may/will probably 'lose sync' and
>t
I am looking at upgrading a 2600 but am amazed at the cost of the memory.
The upgrade for 32 to 64 MB on the 2600 is costing me $1,273.
That is really incredible. I used to be able to use kingston memory.
Will the 2600 take Kingston memory or should I buy the Cisco memory that
is being recommend
I'm also waiting for answer to this question. Can anyone please suggest us ?
Rgds
Sridhar
- Original Message -
From: "g bryant" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 09, 2000 11:02 AM
Subject: 2600 w/FW set - VPN client
> Can anyone give me a sample config usi
hey..
you could do
'line vty 0 4'
'transport input none'
that would close down the telnet deamon...
justin :)
On Tue, 9 May 2000, Kevin Marley wrote:
> I know there was a recent discussion on how to disable outbound telnet
> seesions from a router. I am looking for how to disable telnet service
Does anybody have the links to free books?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
So, can I use a crossover cable (twisted pair -rj45)or make a cable(twisted
pair) to have two cisco routers back-to-back if they have built in
dsu/csu's? ; or if one router has a built in dsu/csu and one has what I
think is called a db60? I have this equipment and I think all I need is
the 5in1
oops, I forgot one more doc about the firewall set.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113t/113t_
3/firewall.htm
sorry about the 2 emails
-Original Message-
From: Mahisri [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 09, 2000 3:45 PM
To: g bryant; [EMAIL P
I am also trying to do this, only on a 1720. I've found some docs on the
Cisco site that detail the CBAC part of the firewall set.
www.cisco.com/warp/customer/110/32.html
www.cisco.com/warp/customer/110/36.html
one of them includes a sample config using CBACs, including the ip inspect
command.
Yes Here try this link
http://www.cisco.com/warp/customer/707/index.shtml#ipsec
- Original Message -
From: Mahisri <[EMAIL PROTECTED]>
To: g bryant <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, May 09, 2000 5:45 PM
Subject: Re: 2600 w/FW set - VPN client
> I'm also waiting for
What are your opinions concerning the Sybex e-Router. I am thinking
about buying it. Are there better e-routers? You can answer directly to
me, instead of the group if you wish.
Thanks,
Fred
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.htm
Hi
Could I use 2610 or 3640 like a DHCP Server ?
How ?
Thanks
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAI
Michael Oliver wrote: "is there a way to upgrade it to "enterprise"?"
Michael,
In the Cisco Product Catalogue entry for the 1900 (available on CCO on the
web or CD) , it says "The Enterprise Edition software is pre-installed in
Enterprise Edition switches, and available as an Upgrade Kit fo
You want to use Cisco Easy IP.
Cisco link -
http://www.cisco.com/warp/customer/cc/cisco/mkt/ios/nat/tech/ezip1_wp.htm
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
I have three 2501 routers and a tftp server in one of the subnets that is
attached
to the e0 of one of the routers. "copy star tftp" works from the router that
the tftp
subnet is directly connected to, but the other two routers fail to connect.
Both of the routers that failed to connect can ping
In my experience, the Kingston memory works fine and is a LOT cheeper.
However, when you call TAC with a problem with your router, they sometimes
ask if you have cisco memory installed. If the answer is no, then
they usually won't help you until you take that memory out.
my two cents.
-Francis
-
> Please I'd like to know. In the CCDA exam will I be asked to select a
particular
> type of router or particular type of catalyst switch that will best suit a
> scenario without the product selection tool or will I be provided some
sort of
> chart in the exam
I had a few questions on "pick the
Someone ask me today, what's cisco srp mac layer protocol ??? Appreciate
anyone advise me about this..
Thks/Brgds
Tazar
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___
Just know the exam objectives and you will be fine.
Take Care,
Scott
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to
I was wondering if anyone could help me out. I need to implement OSPF over
frame relay. I have a hub and spoke topology for the frame relay. There
are 3 main hubs each with about 20 sub-interfaces on them (all point to
point). I am looking for the best way to implement OSPF. I was thinking of
Francis,
Enable a routing protocol.
The simplest way is "router rip" in global configuration mode, then "network
X.X.X.X" with X being your network(s) you want to route. This is needed for the
other routers to find a path to router with tftp server attached.
Tom Trygar
"Arigo, Francis" wrote:
I was told to expect some thing in the mail between May 24th. and June 8th.
""Glenn"" <[EMAIL PROTECTED]> wrote in message
8f8pv8$7un$[EMAIL PROTECTED]">news:8f8pv8$7un$[EMAIL PROTECTED]...
> Hi there,
> Could anybody help me out as to what I should concentrate on for the CCNA
> 1.0 Exam.
> Also
Dear Gang,
Please check the following URL --
http://www.cisco.com/pcgi-bin/lm/buffer/offer/networkagility/1276_landing/L319-166XD
please watch the wrap.
Bye
-Mak
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and
Hello,
I have users dial up to an AS5300 then to company
backbone. For some reason, users got timeout when they
tried to connect exchange server(using Outlook). Other
network program works fine. Users on LAN do not have
any problems. Any thoughts?
Thanks in advance.
Jim
I know that this is a long shota really long shot, but I am looking for
anyone else in the El Paso, Las Cruces area to study with. I am currently a
CCDA and I plan on making the trek to CCIE. Would love to have some company
along the way. Please write me if you are in the area.
Thanks,
Mic
I was told to keep my eyes open from May 24th. thru June 8th.
"iancu mihai" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> By aby chance anyone of you received their results on the exam?
> I took the test at the end of March and still no news.
>
> Is this me
I've implemented a similar setup to your second thought - area 0 across the hubs
and a separate area for each set of hub 'spokes'. Hub routers are ABRs. If
your spoke sites have more than one router each you'll need to watch out for
your areas getting too large, but it's not likely to be a probl
binhy,
Let me just say that you are just so on, man. You speak with just
such elegance and grace that it humbles me. I would love to me you in
person and express my admiration. I don't think I could ever get tired of
expressing my admiration and graditude. I think I could spend hours
--- Thomas Trygar <[EMAIL PROTECTED]> wrote:
> Francis,
>
> Enable a routing protocol.
He must already have a routing protocol running as the
routers can ping the tftp server. I have seen this
before with the 2500's and cannot remember the solution.
I have a problem getting this to work correctly. My workstation ip address
is 95.0.8.52 and the ethernet address of the router I am telnetting too is
95.0.8.99.
interface ethernet 0
ip address 95.0.8.99 255.255.0.0
ip access-group 101 in
access-list 101 permit tcp any host 95.0.8.52 eq telnet
A problem I commonly see is the TFTP server is a "secure" server.
Meaning it will only accept a file for upload if it already exists. This
could be the problem if he's using the default configuration file name. Use
'touch' and 'chmod' to create the file first, then try uploading it.
Chris M.
You need to create a new user named mytestlist.
Allen
-Original Message-
From: Zach Stewart [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 10, 2000 12:40 PM
To: [EMAIL PROTECTED]
Subject: Lock-and-Key
I have a problem getting this to work correctly. My workstation ip address
is 95.0.
I got Cisco 2524 and 1000 ISDN modem and would
like to connect them togeather so i can simulate WAN
link. I am wondering how would i do it and what kinda
cables required to do this??
Thank u everyone.
Inamul
___
UPDATED Posting Guidelines: http://www.groupstudy.c
actually, I'm using the cheesy-but-simple Cisco TFTP server for
win9x.
I can telnet from the tftp server to the routers; the same routers
that can't connect to me via tftp.
-Original Message-
From: Chris McCoy [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 09, 2000 9:55 PM
To: [EMAIL PROT
Hi all
Has anyone take the BSCN Beta or the real exam? If so, what is the
main focus of the exam, or perhaps you could help me with the exam
objectives. I checked on Cisco web site, they have published the
course outline and I must say that it is shorter than the previous
ACRC.
Thanx
Marakalas
_
87 matches
Mail list logo