Chuck,
I am truly sorry, and I am also supremely confident that you will
someday be Chuck, CCIE. You have been an example to the group both
in sharing your preparation methods, and, equally important, your
philosophical/emotional approach.
Unfortunately, Dilbert's management sometimes wins.
Hello all,
For study purposes, I've given a Catalyst 2800, with a couple more to
follow.
The problem is, no one has any idea of the configuration.
I don't have a serial cable, though can order one if need be. Can I
interface on port 25 for management purposes? Straight or cross-over
cable? And
Chuck - as a 2-time failer, I can empathize with you. You sound like a real
trooper, and I'm very confident that *your* next time through will be
passing with flying colors.
Your #3 is extremely critical for anyone who takes the exam. There are
moments (usually in the beginning of the test)
CCO is a good resource for this - my search turned up these documents:
Sample SSRP Configuration:
http://www.cisco.com/warp/public/121/ssrpconfig.html
Configuring LAN Emulation-the section on Configure Fault Tolerant Operation
Hi All you gurus,
I am about to take the exams of Solaris 8 System Administration I 11.Do
anyone have or know of anything site where there is Questions and
Answers.Thanks for your help.
Regards,
Muhammad
CCNA,CCNP
_
FAQ, list archives, and subscription info:
What he said.
:)
I was about to fire off a missive, when I noticed that everything that I
wanted to say was contained herein(after, as well :), hereinafter
referred to as "content", said content solely the property of Greg,
hereinafter referred to, both on and off the "list" (see section 6.2.1,
this *will* originate a route of 192.168.1.0/24 by injecting the static into
RIP, but to properly summarise - ie only originate the aggregate address and
not the more-specifics - you would need to filter the /30s associated with
the serial interfaces with a distribute-list or route-map.
Hi All
I will be taking my BSCN in 3 weeks times, so would like to know what
should i study for? or is there any other materials i can get from the
web.
Thank, with regards
Chan
_
FAQ, list archives, and subscription info:
Chuck,
Sorry to hear about the outcome of your practical exam. Take solice in the fact
that so many people have to retake it. It is a testament to the certification's
value, and to the ability of those that make it. Persistance separates life's
winners from life's losers. At some point,
It wasn't that bad.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I'm interested in thoughts and opinions on the practical utility of the
official Cisco IOS Configuration Guides and Command References available in
print, on CCO, and on the documentation CD-ROMs that ship with Cisco
products. There have been a number of allusions on and off this list to the
Hello all,
I have a cisco 4003 switch to which I plugged an Intrusion detection
system which is running in promiscuous mode. what I was expecting to see
is only broadcast traffic and I was planning to do port mirroring to
monitor other network traffic..
The funny thing is that I could see all
Hint - during my review with the proctor after my recent failed attempt, the
proctor told me that in his opinion it was critical that one be familiar
with the configuration guides, and that one have practiced using the
configurations presented there.
Several folks who passed the lab first time
It's not clear to me what problem this configuration will solve. RIP
summarizes at classful boundaries anyway, so the 192.168.1.0/24
network would be advertised to any other network (assuming
auto-summary is not disabled). This configuration would advertise
the /24 supernet inside
Hello,
Found this great site for Cisco lab rental for telnet or walkin.
http://www.voxcomm.com
Also, selling Cisco gear at cost for training and study groups.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
hi,
can anyone tell me where can i get( buy) the power point presentations used
for teaching ccnp and ccna in the class room.
are the available to cisco training partners only.?
regards,
umer
_
FAQ, list archives, and subscription info:
Sorry about that Chuck...I dont know you but after reading this I can
feel your pain. You will get it next time...
Thanks for the info. :-)
From: "Chuck Larrieu" Reply-To: "Chuck Larrieu" To: "Cisco Mail List"
Subject: CCIE Lab Report - unsuccesful Date: Sat, 7 Apr 2001 18:34:20
-0700 Hey,
Hi Chuck,
Thanks for taking the time to narrate your candid and thorough post-lab
experiences. The outcome should not discourage you as the whole group
remains impressed with your wealth of knowledge, the desire to know more,
and your fine power of expression. I have been there too, and finally
Well if you have a desire to pass the CCIE Lab, I think it would be very
difficult, shall I say virtually impossible, to sail through without a fair
command over Cisco IOS Configuration Guides and Command References. I
realize that it may be very difficult to remember every bit of it, but the
I would study Scalable Cisco Networks..
I would also have started by looking at the
course on www.cisco.com, but then again that would
require work on your part
Rick
"Chiao Liang" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All
I
Chuck,
Thank You. Over the past year + you have been a mentor (and Joe) to many of
us. As you had success, many of us were inspired. I know I was always a
few steps behind ya... with the NA then NP then DA then DP... now I just got
my ATM specialization so on to the written. But thru all this
Chuck,
I am surprised that you didn't pass on the first attempt (you're scaring
me). But I also think that it is an important part of the process. My first
attempt will be in August. Failing the Lab makes us see the value and
difficulty of the lab; appreciate the level of expertise required to
hi,
can anyone tell me where can i get( buy) the power point presentations used
for teaching ccnp and ccna in the class room.
are the available to cisco training partners only.?
Correct. Training partners only.,
regards,
umer
_
FAQ, list archives, and
At 03:59 PM 4/7/01 -0400, Fred Danson wrote:
Fred I setup Lab #30 just to see if I would experience the same thing,
and initially I did, until I rebooted RouterA (your R2503).
Somehow rebooting allowed reachability and I was able to ping
the 152.1.1.1 address (actaully I used 192.168.104.3).
I
- Original Message -
From: Control Program [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, April 08, 2001 8:36 AM
Subject: Cisco IOS Documentation: How useful is it, really?
I'm interested in thoughts and opinions on the practical utility of the
official Cisco IOS Configuration
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=1228062723
This is the best IOS command reference I know of. I've purchased the
11.0(22) release a few years ago now one of these 12.1's. I can think of
no better way to master Cisco IOS.
Phil
- Original Message -
From: "EA
At 03:59 PM 4/7/01 -0400, Fred Danson wrote:
interface Serial0
ip address 192.1.1.1 255.255.255.0
no ip directed-broadcast
ip ospf interface-retry 0 see CCO link below
no ip mroute-cache
no fair-queue
http://www.cisco.com/warp/public/104/28.shtml
Stefan
My comments follow below. Please let me know how it worked out.
---
OSPF virtual links. Here's my configs: R2503 - backbone router
hostname r2503 !
router ospf 100 network 192.1.1.1 0.0.0.0 area 0
John Hardman wrote:
I sniped most of your report below with the exception of point #5. I have
been trying to form a picture of the lab, trying to make it a part of me
that I visit on a regular basis. When I was in Taekwon-Do I found that the
more time I spent in visualization the better I
The changes you listed really won't do anything. As long as the IP address
on the interface falls into the network + wildcard mask range used in the
network statement, it will work fine. You can check to see if the interface
is active in the ospf process using the show ip ospf interface
8000 bytes = 64000 bits. What speed is your ISDN channel? How long will
it take a ping to get to the other side and back? How long is your
timeout?
I expect that if you increase the timeout you will see your pings return.
JMcL
-- Forwarded by Jenny Mcleod/NSO/CSDA on
Hi,
Just trying out ospf401 on fatkid, and was reading the hints about
summarizing. Here's the hint
"There are two built in OSPF methods to summarize OSPF routes. One way
summaries between areas. The other summarizes between Autonomous
Systems. Do you know a third way to summarize routes,
What about a static route?
"Clue Less" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Just trying out ospf401 on fatkid, and was reading the hints about
summarizing. Here's the hint
"There are two built in OSPF methods to summarize OSPF routes. One way
I need ICRC and I now have most other CCNA2.0/MCSEW2K.
Anyone interest , email to me.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How about default routes (0.0.0.0 0.0.0.0)?
John
Clue Less [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Just trying out ospf401 on fatkid, and was reading the hints about
summarizing. Here's the hint
"There are two built in OSPF methods to summarize
Hello,
A pre-sales consultant job ( in network and system solutions field) is a
great job?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
no ip classless
ip route 10.0.0.0 255.0.0.0 10.10.32.0
Thanks
John
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
no ip classless
ip route 10.0.0.0 255.0.0.0 10.10.32.0
Whats this mean
Thanks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
go here http://www.fatkid.com/html/frame_relay.html
Mark Rose wrote:
A while back there was a posting showing how to set up a frame relay switch
with 3 routers (with configs). I misplaced the copy I had. I couldn't find
it in the archives. Could someone help me out.
TIA
Mark
jonh:
cisco shiped it for free for me .
John Hardman wrote:
Humm... Interesting, Cisco is willing to give them away free, but they do
not ship for free. I wonder which is the better deal, your price for
something free or something for free.
HTH
--
John Hardman CCNP MCSE+I
Dear all,
I have an old 7507 and would like to upgrade the boot image and IOS to
12.0.x... can someone suggests:
1. The most reliable IOS version in 12.0.x?
2. I would most like to take away my ethernet and channelized T1 module.
(therefore, I have AIP, RSP2(64M ram), VIP+PA-FE-TX x 2, and
I am using a 4500 with a Fast Ethernet interface and would like to be able
to route between VLANs that are setup on my 2900. I don't have the option to
use encapsulation ISL using Ver 11.2 on the 4500. Do I have to upgrade to
11.3 or something higher to be able to use ISL?
Thanks!
Hey Group,
I noticed that one of my 2500 routers which has a total of 16mb of flash on
2 SIMMs has the flash split up into 2 partitions. If I wanted to put an IOS
on the router which was larger than 8mb, would it work? Is it possible to
span a file over multiple flash SIMMs?
Thanks in
- Original Message -
From: "John Brandis" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, April 08, 2001 10:06 PM
Subject: What does this line mean
no ip classless = you are not using classless routing
ip route 10.0.0.0 255.0.0.0 10.10.32.0 = ther is a static route to network
I believe the actual command is #no partition FLASH
- Original Message -
From: "Fred Danson" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, April 09, 2001 3:51 AM
Subject: 2 8mb flash partitions
Hey Group,
I noticed that one of my 2500 routers which has a total of 16mb of
Hi people,
Cleared Switching this morning. It was pretty tough , as this was the first CCNP exam .
Hope to clear Routing soon.
1 down 3 to go.
Shree.
_
Chat with your friends as soon as they come online. Get Rediff Bol at
I have a 2514 w/ 8Mb flash. When I used mzmaker to compress IOS 12 that is
10MB it worked fine. However, after writing the .mz file to flash and
starting up the router it keeps looping "Error : memory requirements exceed
available memory
Memory required : 0x00AF99A0
Exception: Software
Hi.. May I know what is the passing mark for CCNP switching? How many
questions and time allow? Whether the mark is from the scale from 300 to
1000 like what CCNA 2.0 do??
SCT
==
De informatie opgenomen in dit bericht kan
48 matches
Mail list logo