Problems with channel D (PRI access) [7:471]

Hello, Here are the logs that I have on my router Interface IP-Address OK? Method Status Protocol Dialer110.200.9.1 YES NVRAM upup Dialer210.200.8.3 YES NVRAM upup Ethernet0 10.

CCNP [7:922]

Hello group, In order to certify for CCNP, what is the order recommanded to take the exam for each course (CIT, BCRAN,BSCN,BCMSN)?. Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=922&t=922

Security question [7:1079]

Hello People, We currently putting security into our Border Routers. We intend to protect ourselfs form smurf, anti-spoofing and SYN Flood attacks. Can somebody tell me what is the difference between DDoS and DoS. I have another question what are matians Networks??. Regards. Rock BASSOLE Til:

CAR (Commited Access Rate) [7:1234]

Hello Group, I would like to apply an CAR for icmp and SYN Flood traffic to a Serial interface on my router. How can I determine the bandwidth limitation to apply (128000) and the maximum (8000), minimum (8000) burst. Here is the example below: interface Serial 0 rate limit input access-group

IOS Upgrade [7:1384]

Hello Group, What is the IOS version recommanded by CISCO that doesn't have the recent bugs ( ILMI, TCP initial sequence number, SNMP)? Thank you. Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1384&t=1384 --

Download new image [7:2120]

Hello, I'am presently working on a Cisco 4500 router. I want to download a new image the router. But the image size is larger than the size on the flash memory card. So I bought new flash memory cards. I inserted the new falsh (empty) cards on the router and now I can't download the image . I ge

Which IOS to use for Upgrade??? [7:2869]

Hello, What is the IOS version recommanded by CISCO that doesn't have the recent bugs ( ILMI, TCP initial sequence number, SNMP)?. Any information is welcome. Thank you. Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=2869&t=2869 ---

ACL [7:2882]

Hi, Can we apply more then one ACL per interface?.. Example: Interface Serial1 ip access-group 102 in ip access-group 103 out ip access-group 104 in ip access-group 105 out Thank you. Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i

How to secure a PIX [7:6583]

Hello, I'am currently working on securing a PIX. Can somebody tell me the different methods that exist to secure a PIX it self. Thanks. Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=6583&t=6583 --

PIX question [7:34630]

Hi group, I want to know what is Long Distance State Sharing (LDSS) and for what reason it's supported by the stateful failover? Also why the PIX does not transfer HTTP (port 80) session in stateful failover? Thank you. Rock . Message Posted at: http://www.groupstudy.com/form/read.php?f=7

PIX information [7:35294]

Hello group, What command can I use to copy a configuraton form a tftp server to a PIX Firewall? I have look on the cisco web site for the command but couldn't find. Can somebody help. Thank you. Rock Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35294&t=35294 --

community characters [7:36652]

Hello, I would like to know if the following characters are allowed for configuring a community string:; and ! using an IOS 12.1(9) E Thank you. Rock. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36652&t=36652 -- FAQ,

Access server configuration (compression MPPC) [7:37668]

Hello group, I have set up an access server using a cisco 3620 (1 E1 interface and 1 FastEhternet) and IOS version: 12.1 (5) T10. The E1 interface will provide both ISDN and PSTN connections, the FastEthernet is for the LAN connection. I would like to activate MPPC compression with clients usi

HSRP [7:14135]

Hello group, I want to know if there are problems on doing a double HSRP (ethernet1 and ethernet0) with 2 routers (same configuration). Have you ever incounter any problems (Duplicate addresse, NAT, ...). Thank you. Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Posted at: http://www.gro

RE: HSRP [7:14135]

figure the same HSRP/standby address or IP subnet on multiple LAN interfaces. You would have to use a different IP subnet on each Ethernet interface with a HSRP/standby address in that subnet. Were you asking that or ? --- BASSOLE Rock wrote: > Hello group, > > > I want to know if th

CAR [7:14459]

Hi group, I want to set up a Commited Access Rate (CAR) on my serial interface to the Internet. Cisco recommends that we set up the same CAR on our provider's router. I want to know why we need to do so. Is it to have better service quality or is it for functionnaly reasons?. Any information is

CAR configuration [7:14461]

Hi group, I want to set up a Commited Access Rate (CAR) on my serial interface to the Internet. Cisco recommends that we set up the same CAR on our provider's router. I want to know why we need to do so. Is it to have better service quality or is it for functionnaly reasons?. Any information is

Protection against smurf attaque [7:14634]

Hello group, I would like to protect my router against smurf attaque. For that I have to set up a CAR on my serial interface. But I want to know how to determine the proper amount of bandwidth for icmp packets for the CAR (I have a 8Mb/s bandwidth interconnection to the Internet). By trail and e

RE: The Scoop on PIX? [7:26607]

-Message d'origine- De : Andrew Michael [mailto:[EMAIL PROTECTED]] Envoyi : dimanche 18 novembre 2001 00:09 @ : [EMAIL PROTECTED] Objet : The Scoop on PIX? [7:26607] Hi all. What are some of the reasons why a person would choose a PIX solution rather than a good router with the the ri

PIX [7:28083]

Hi group, I'am using a PIX with 2 interfaces (inside and outside). -Security level for the inside interface is 100. -Security level for the outside interface is 0. Is it possible to use the PIX to route a specific host installed on the outside interface towards another subnet (still on the out

Route map [7:33429]

Hi group, I would like to define a route-map on a router to forward certain packets (defined by the ACL 101) to 2 different next-hop address. I use 2 next-hop addresses to avoid the single point of failure. The 2 next-hop addresses are directly attached to the router. The first next-hop addres

SSH connexions [7:41178]

Hello group, The default SSH port is 22. For security reasons we would like to modify this port to another value for VTY connexions. How can I modify the default SSH port for VTY connexions on a Cisco router. Thank you for any information. Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Po

RE: SSH connexions [7:41178]

Tim, I'am using SSH connexion on a Cisco 7204 router. Is there a possibility for me to connect on a different port other than 22 using Cisco router commands. Thank you. -Message d'origine- De : Tim Potier [mailto:[EMAIL PROTECTED]] Envoyi : dimanche 14 avril 2002 05:37 @ : [EMAIL PROTE

IOS Upgrades [7:45128]

Hello group, After the announce on SNMP and NTP vulnerabilites we are doing upgrades on our routers with Cisco's recommandations. We are having difficulties with one of our router that has it's flash in Read-Only. Which make it impossible to upgrade I think. Do you have an idea on how to upgra

RE: IOS Upgrades [7:45128]

. Please visit this CCO URL for upgrade procedures: http://www.cisco.com/warp/public/130/upgrade_index.shtml Hth, Angel -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of BASSOLE Rock Sent: Monday, May 27, 2002 5:38 AM To: [EMAIL PROTECTED] Subject: IOS Upg

Remote Access problem [7:45924]

Hello group, I' am presently working on a remote access solution for our network. We have decided to use a Cisco 3620 with a Fastethernet for LAN connexion and PRI/E1 module for WAN connection. The router is running IOS version 12.2(4)T3. This access server is configured to allow analog connexio

Remote access troubleshooting [7:45936]

Hello group, I' am presently working on a remote access solution for our network. We have decided to use a Cisco 3620 with a Fastethernet for LAN connexion and PRI/E1 module for WAN connection. The router is running IOS version 12.2(4)T3. This access server is configured to allow analog connexio

PIX OID [7:19241]

Hi group, We are currently using the MRTG tool to monitor our Internet Access. This tool has help us take decision regarding the upgrade of our link to the Internet. Behind our router's we have Cisco PIX Firewall. We would like to monitor the number of connections made trought our PIX with MRTG.

Question on Sniffer Pro [7:19733]

Hello group, I have some questions on the sniffer pro from Computer Associates. When using the expert window I often have the information: 5s 235msToo many Retransmissions TCP:[172.12.45.65]-[213.44.0.34] Port 443-1208 My question is: which station is doing to many retransmissions?.

SDRAM [7:24228]

Hello, Can somebody tell me for what SDRAM is mostly used for (What type of application require the use of SDRAM). Regards, Rock BASSOLE Til: +33 (0) 1 45 96 22 03 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24228&t=24228 ---

ORA 3113 [7:24637]

Hello, Is error ORA 3113 network related? Has anyone encountered this problem? If yes then how did you solve this problem. Thank you. Regards, Rock BASSOLE Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24637&t=24637 -- FAQ,

PPP encapsulation over HDLC [7:25912]

Hello group, I have a configuration on a router that does "ppp encapsulation" over a serial line. Our operator is running HDLC on the line. On this line we get some CRC errors from time to time. Can this configuration be responsible for the CRC errors? Is it correct to run "ppp encapsulation" o

Receiving 2 calls simultaneously on a BRI interface [7:57302]

Hello group ! I would like to configure a router to connect to 2 sites with ISDN. The router's configuration should be able to accept 2 incoming calls simultaneously from the sites on a single BRI. Is it possible to assign a channel B to 2 different destinations at the same time (when the ca

Saving the configuration of Catalyst 4006 [7:52531]

Hello group, I' am saving the configuration of a Catalyst 3548 on a management station using the command : "copy running to net" via SNMP. The Catalyst 3548 is running : Version 12.0(5.4)WC(1) I tried to save the configuration of a Catalyst 4006 using the same command but it did not work. The

RE: Saving the configuration of Catalyst 4006 [7:52531]

EMAIL PROTECTED]] Envoyi : lundi 2 septembre 2002 14:44 @ : BASSOLE Rock Objet : RE: Saving the configuration of Catalyst 4006 [7:52531] you need to save using the "write mem" command to save to flash. Cat4000 (enable) write ? memory Write to NV m

Support exam [7:52727]

Hello group, I would like to take the support exam next month. Can you please recommend me the best book to buy between Cisco Internet Troubleshooting (CiscoPress) and Troubleshooting Campus Networks by Priscilla Oppenheimer. Thank you. Rock BASSOLE Message Posted at: http://www.groupstudy