Friend,
You need to work on NAT for this.
Refer to Doyl Vol-2 for similiar example.
HTH
From: Lists Wizard
Reply-To: Lists Wizard
To: [EMAIL PROTECTED]
Subject: Changing telnet port [7:22271]
Date: Fri, 5 Oct 2001 17:44:45 -0400
Hi Group,
I wounder if I can change the telnet port on my
to each queue.
Thanks for the help
A Cisco lover
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21656t=21656
Hey guys..
By considering the fact that CLNS is no more a part of RS Lab sylabus,how
far they can go to ask about ISIS??
As far as i know there are many things which require support of CLNS in
ISIS??
Any one here can please specify briefly.
Thanks for help
Cisco Lover
Hi guys,
Any one can recommend any practical scenerio/Example Involving Proxy-ARP
by specially considering RS LAb.
I heard this word many times but not sure how to use it practically and
where.
Thanks for the Help guys.
Cisco Lover
we have to change ethernet address to noncanonical at this
stage before specifying with ICANREACh command or ant thing else??
Please solve the confusion.
Thanks.
Cisco lover
_
Get your FREE download of MSN Explorer at http
H guys,
Any idea which one is module/Part no for 7206 PRI ISDN ???
Thanks for help.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
Hi Guys,
Any idea about the new Lab RS lab format??
How they can built/change the 2 days lab format to one day including
troubleshooting as well??
Are they going to delete the initial stuff like Addressing /diagrams /basic
network etc???
Any idea guys..
Thanks for the help.
Cisco Lover
Hey Guys,
I have got lab in singapore for start of march,02.
Any one wanna exchange it with any day/date in 2001.
Thanks.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
Guys?
how to delete whole 3920 config at a time??
any switch or command/menu??
Thanks for help.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
ARe we allowed to put IP ospf point to point command on loopback interfaces
in order to get their actual mask instead of /32 in CCIE ALB??? Or do we
have to use are0 range command to summarize this??
Thanks for the help.
Cisco lover
/CCIE can explain this plz.
Thanks a lot.
A Cisco lover
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=19169t=19169
is a response.
What are the masks you mentioned? What are you working on??
Priscilla
At 05:03 AM 9/6/01, Cisco Lover wrote:
Hi guys,,
Any one can explain how the network+masks for NETBIOS and SNA traffic
comes
as 0xf0f0 0x0001 and 0xd0d0 0x0001f
IS IRB/RSRB/SRB/SRTB also important
Hiu guys..
Iam continuously getting this error on my routers configured for
multicasting..Any idea???
Thanks for the help.
22:01:21: %PIM-4-DEPRECATED_HELLO_TLV: Deprecated PIM Hello Option TLV 19
(Bidir
TLV) from 172.16.1.1 (Serial0)
22:02:21: %PIM-4-DEPRECATED_HELLO_TLV: Deprecated PIM
from FR router and redistributiig
to OSPF domain after redistribution.
From: EA Louie
To: Cisco Lover ,
Subject: Re: URGENT:FOR Routing experts:Plz help!!! [7:18370]
Date: Mon, 3 Sep 2001 23:21:58 -0700
Look at the routing table for the next IGRP router to see the effects of
your
domain
but not able to ping them.
As I am able to get results when I used Static routes as ASBR, hence I
suspect there is something wrong with SUMMARY ADDRESSES ,may be..
Plz comment...Any one
Thanks
From: EA Louie
To: Cisco Lover ,
Subject: Re: URGENT:FOR Routing experts:Plz help!!! [7:18370
152.15.0.0, metric=1600
05:26:52: IGRP: Update contains 2 interior, 4 system, and 0 exterior routes.
05:26:52: IGRP: Total routes in update: 6
ISDN2# conf t
From: EA Louie
To: Cisco Lover ,
Subject: Re: URGENT:FOR Routing experts:Plz help!!! [7:18370]
Date: Tue, 4 Sep 2001 00:46:26 -0700
Hi guys..
Some strange Question.
I have my FR switch setup as Full Mesh(Lab setup).So there must be some
unused DLCIS on the spoke side which I can see by command as shown below.
Is their any way If I can get rid of these Unused DLCIS completly ,by doing
any thing on routers(Not on FR
Hi guys,
Please help to solve this ACL.
Thanks.
Configure access list on router such that all tcp sessions that originated
from Router will always be permitted on its serial0 interface??
Is that correct ?
access 101 permit tcp any any established ??
Hi guys,
I am still revolving around an stupid DLSW confusion.
I found in many 3rd party labs and other configurations that they are
using SOURCE-ROUTE BRIDGE x command even when configuring DLSW+ between 2
ethernet segments..
Do we really need to put this command even when we are not
Hi guys.
facing some strange IGRPOSPF redistribution problem.
Router ISDN2 is ASBR ,running IGRP with FR and running ospf with rest of
network.
Now problem is that I am able to redistribute IGRP into OSPF and can see the
IGRP routes as OSPF external in ospf domain but not able to get
Hi guys,
Trying to run ISL/DOt1Q trunking on my cat5,but getting this error.
Console (enable) set trunk 3/1 on dot1q 1
Feature not supported on Module 3.
Is that due to IOS???if yes ,please advice required IOS for this module.
Thanks.
Console (enable) sh ver
WS-C5505 Software, Version
Hi Guys...
Any Idea how to setup one sided chap???that is only one router is sending
challenge??
Thanks for the help..
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
Hi Charlie,,
Thanks for the help..
So, the rest of the commands will remain the same??I mean we still have to
put ppp authentication chap and USERNAME+PASSWORD set on both sides??
Cisco Lover
From: Charlie Hartwell
Reply-To: [EMAIL PROTECTED]
To: Cisco Lover , [EMAIL PROTECTED]
Subject: Re
Hi ,
Thanks for the help??
Is the rest of the commands will remain the same???
DO we still have to put ppp authentication chap and username+password set at
both ends??
Thanks again.
From:
To: Cisco Lover ,
Subject: Re: One Sided Chap? [7:18056]
Date: Fri, 31 Aug 2001 15:43:14 +0400
Hi friends..
Can any one send me any working configuration for trunking using cat5 for
intervlan routing..
I have followed all the instructions in books and everwhere but still cant
get it work..Donot know where I m wrong.(Config atttached)
Thanks for the help..
Cisco Lover
FE router
study lately aren't you ? :)
Take care
Tony M.
#6172
- Original Message -
From: Cisco Lover
To:
Sent: Friday, August 31, 2001 5:43 AM
Subject: Working ISL/DOT1Q config [7:18070]
Hi friends..
Can any one send me any working configuration for trunking using cat5
for
intervlan
into this problem before. The way you configure would work only if
you encapsulate using ISL. If you use the dot1q, you have to configure the
physical interface FE0/0 with a management VLAN (VLAN 1 by default).
Sub-interfaces will be assigned a different VLAN and encapsulated with
dot1q.
Cisco Lover
Guys,
The objective of the problem I m going to explain you is to encrypt ONLY
TELNET traffic b/w these two routers.
THe main problem I m facing is that IM not able to do this by implementing
specific host lists that permits only telnet traffic from one to another
host..Like
access-list
(1) How to change the OSPF cost of using ethernet interface to 90 and serial
interface to 580 across whole network ,WITHOUT using ip ospf cost command???
(2)How to propagate SOme loopback interfaces via OSPF such that these
loopback interfaces are not configured for ospf .Also these routes
and dst ports if possible for consistency.
HTH,
Kent
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Cisco Lover
Sent: Thursday, August 30, 2001 4:21 AM
To: [EMAIL PROTECTED]
Subject: IPSEC Challenge Problem [7:17844]
Guys,
The objective of the problem
Hi Guys,
How we can restrict catalyst to allow telnet access to particular hosts??
Thanks for the help.
Cisco Lover
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http
Hello Guys,
This Question is from some Book Apendix pass by my friend(Let me knowthe
book name and Author if u know ;)).Please help to clarify.
Thanks.
Vlan1 Contains 28 servers in server farm.Configure R1R2 so that in event
of router failure the other router will take over for the
interface S0, it shows BW=128K??
This is my ACTUAL CONFUSIONWHAT SHOULD BE THE VALUE OF BW TO USE?
Thanks for your help.
Cisco Lover
From: Tony Medeiros
Reply-To: Tony Medeiros
To: [EMAIL PROTECTED]
Subject: Re: A Custom Queuing Question [7:17622]
Date: Wed, 29 Aug 2001 01:52:36
Thanks a lot Tony
SOme More Q's on your way.. :)
From: Tony Medeiros
To: Cisco Lover ,
Subject: Re: A Custom Queuing Question [7:17622]
Date: Wed, 29 Aug 2001 00:41:05 -0700
The actual bandwidth is the clock rate of the link.period. The
bandwidth statment is for other protocols
Hi Guys..
Can you please help for some IPSEC Stuf.
Q1. Which ALgo in IPSEC supports 128Bit/Tripple DES??
Q2. Is there any way to confirm if Our VPN/IPSEC setup is working properly..
I used commands show crypto ipsec sa+show crypto isakmp sa ,But cant
see any thing coming.Below is my
by doing a 'debug ip packet detail 110'. You can
see how many encrypted packets using the 'sh crypto engine connections
active'
The 3DES IPSEC image is not easy to get a hold of if you're not in the US.
-Original Message-
From: Cisco Lover [SMTP:[EMAIL PROTECTED]]
Sent
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Cisco Lover
Sent: Wednesday, August 29, 2001 6:28 PM
To: [EMAIL PROTECTED]
Subject: RE: IPSEC Q's [7:17646]
Dion,
Thanks a lot for detailed analysis of my problem.
In order to match my access lists..I put on both routers the command
Hi Guys,
Again with old Q..But I haven;t get any good response??
If I want to implement VOIP/VOFR in my Lab setup.
Which port nos I need to enable??
Thanks for help. ;)
_
Get your FREE download of MSN Explorer at
Hi Guys,
I want to implement Priority/Custom Queuing for Voice in my network.
Which ports I need to handle with??? I read that voice uses
UDP ports 16384-16624???
Any suggestions/Corrections??
Thanks.
_
Get your FREE download
Hi Friends,
Can any one here please explain what should be thebandwidth Value if we
need to divide traffic by percentage ,using Custom queuing.
As far as I know(IF Im right )during our lab,as we usually take clock as
64Kbps,then we need to divide this factor (64/8) among the traffic.
What
total bandwidth as
64Kbps when dealing with FR(and diving this as per traffic),but on the other
hand when dealing with normal serial line he is considering this factor
actual to 32Kbps.
This is my real confusion???
Thanks for ur help Again :)
From: John Neiberger
To: Cisco Lover
CC
ping R1.
Any suggestiong. ALso please guide if u know any good workable config.
Thanks..
A Cisco Lover
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com
Chuck,Winston and All ...
Thanks a lot for your replies..
Winston:
Thanks a lot..Again ..Putting Multipoint at R1 for R4 solved my problem..:)
Now I ab able to build OSPF+FR network without IP OSPF NETWORK
Command..
Cheers..
Cisco Lover
c
From: Shaw, Winston Mr 5 SIG CMD
Reply-To: Shaw
Hi Guys,
Can any one explain How to set up and use Route-map on Spoke routers in
order to guide them to use The Hub interface as next hop and not the other
spokes router addresses.
I tried using..
route-map match ip add 101
set ip default next hop Hub router address
access-list 101 permit
Hi Guys..
Come with some New Queston..
For eg,
our FR switch is setup for Full mesh,But out network is setup as Hub Spoke
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
switch)
I know Must be confusing for majority here ..But ..
I AM SURE I WILL GET THE SOLUTION HERE AS WELL.
Thanks.
From: Cisco Lover
Reply-To: Cisco Lover
To: [EMAIL PROTECTED]
Subject: For FR Grus [7:16635]
Date: Tue, 21 Aug 2001 07:06:08 -0400
Hi Guys..
Come with some New
are going through
employs goobers that love to mis map pvc's :)
And unless you can figure out a way to filter at the dlci level, they stay
until you call the phone company and tell them to remove them.
-Patrick
Cisco Lover 08/21/01 10:08AM
Oopss
Sorry guys...I donto know where it lost
Hi Every one,
Having problem with running OSPF with ISDN.
The multicast Hello packets of ISDN continuously casuing line to
bounce.
Have tried by putting Ip ospf demand circuit on one/both sides of
connection but no succes.
Any idea???
Thanks for ur help.
Cheer..
CisoLover
48 matches
Mail list logo
