MPLS White Paper Announcement [7:40035]

Galina Pildush is publishing an MPLS white paper today on www.certificationzone.com. You better hurry though because it will only be available free for today only. This should be an excellent source for those studying for the C&S exam. As a CCIE and JNCIE, Galina knows MPLS well. Regards, D

RE: Good choices for IDS [7:13630]

Why not use SNORT if cost efficiency is a major concern? Personally, I like a combination of several IDS systems including SNORT and Recourse Technologies Mantrap and Manhunt. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On

RE: what's wrong with CCIE today? [7:13151]

isco certification mailing list without "OFF TOPIC" in the subject. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sean Young Sent: Friday, July 20, 2001 4:15 PM To: [EMAIL PROTECTED] Subject: what'

RE: Help with 2509 [7:10869]

Do you have transport input all configured under line 1 8? Sorry, I may have missed part of the thread. Post your config. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jonathan Hays Sent: Tuesday, July 03, 2001 3

RE: Catalyst 6500 & Alteon [7:10895]

appropriately. If no apparent mismatch is found, contact your technical support representative. Looks like the VLAN on the Cat6500 is not the same as the VLAN on the Alteon. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ralph

RE: Lab Equipment - Does anyone ACTUALLY know??? [7:10531]

. Have you ever had to use the mode 10baseT command on newer equipment because the router thinks you are using AUI? I don't think so, but this simple type of error can cause you to waste valuable time. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED]

RE: Training Advice wanted [7:9550]

also be a good choice. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Friday, June 22, 2001 11:33 AM To: [EMAIL PROTECTED] Subject: Training Advice wanted [7:9550] My boss would like to send me to

RE: Migration EIGRP-OSPF [7:5724]

easier to schedule a block of downtime and cut over. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dyson Kuben Sent: Thursday, May 24, 2001 5:59 AM To: [EMAIL PROTECTED] Subject: Migration EIGRP-OSPF [7:5724] anyone

RE: The single best book for CCIE Routing Switching [7:4216]

chives for Token Ring. Find whatever sources you need to understand the topics in the blueprint. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Keith Sergeant Sent: Friday, May 11, 2001 12:41 PM To: [EMAIL PROTECTED] Su

FW: EMUTEL LITE setup

nding upon whether your 2503s have U interfaces or S/T interfaces. I am assuming you must have S/T since you are using the NT1s. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dennis Laganiere Sent: Monday, February 19, 200

RE: PIX vs CheckPoint

Jim, I would be very interested in your view points. I am not a PIX zealot or anything, this was just the best article I have. Perhaps you could respond in detail with a different viewpoint. Regards, David Wolsefer -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

RE: Config help required

ppear. Regards, David Wolsefer _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

RE: PIX vs CheckPoint

This is what you want: http://www.roble.com/docs/fw1_or_pix.html Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Imran Obaidullah M Sent: Friday, January 12, 2001 4:23 AM To: '[EMAIL PROTECTED]' Subje

RE: ISIS over frame-relay troubles.....

What you need to do is use tunnels with frame relay to fix this. You have the cause exactly right too. There is no equivalent to the ip ospf network command. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Nigel

RE: questionmark in netbios accesslist

You need a CTRL-V first. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dezso Csonka Sent: Wednesday, January 10, 2001 5:17 PM To: [EMAIL PROTECTED] Subject: questionmark in netbios accesslist Hi, I have a

RE: Interface backup

physical interface free to use for another purpose. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Groupstudy Sent: Wednesday, December 27, 2000 10:21 AM To: [EMAIL PROTECTED] Subject: Interface backup Once you make a BRI

RE: Behavior of Cisco PAT/NAT?

dress. When multiple local addresses map to one global address, the TCP or UDP port numbers of each inside host distinguish between the local addresses." Regards, David Wolsefer -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Benjamin Walling Se

RE: How Big a router for Full BGP routes?

. I find that on the 3640s my CPU usage is already about 50%. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ryan LaTorre Sent: Saturday, December 09, 2000 9:03 AM To: Groupstudy Subject: Re: How Big a router for Full

RE: ISDN Switch Type basic-net3 - Question- Chuck or Priscilla any input?

ked, I was told that it occurred because they were not using a true basic-net3 switch, they were using some sort of emulation instead. Regards, David Wolsefer, CCIE #5858 isdn switch-type basic-net3 ! username SYDNEY password 7 0 username STOCKHOLM password 7 1 ! interface

RE: ISDN Switch Type basic-net3 - Question- Chuck or Priscilla any input?

This is typical behavior for the basic-net3 switch. You won't see active until the call is placed, then everything will be normal. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Raul F. Fernandez Sent: Thursday, December 07, 2000 9:20 AM To: [EMAIL PROTE

RE: access-list for DDOS attack

Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Yee, Jason Sent: Monday, November 20, 2000 10:20 PM To: '[EMAIL PROTECTED]' Subject: access-list for DDOS attack hi , Anyone knows what the parameter in us

RE: Flapping and Dampening

route even if the route is up. The accumulated penalty is decremented by the half-life time. When the accumulated penalty is less than the reuse limit, the route is advertised again (if it is still up). Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto

RE: IPX Problem

You need a desktop or enterprise image. It seems you only have an IP IOS image. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Shane Stockman Sent: Friday, November 03, 2000 11:38 AM To: [EMAIL PROTECTED] Subject: IPX Problem This might seem silly but

RE: High Availability. (Maybe OT)

, then you need clustering software. This does indeed work with Solaris. You should also investigate using the Arrowpoint switches for local and global load balancing. They will also solve problems such as maintaining stateful connections with cookies and SSL.   Regards,   David Wolsefer CCIE#5858

My impressions of Juniper from the test lab

that pricing is competitive for both products as well. Regards, David Wolsefer **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.htm

RE: how many ls1010s in the lab?

location to location, some having just one, others having more than one.   Regards,   David Wolsefer, CCIE# 5858 -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of R. D. ZhangSent: Tuesday, September 26, 2000 12:37 PMTo: [EMAIL PROTECTED]Subject: how

RE: Cisco versus Juniper at the corelayer

manufacturers, but are loyal to who is writing the code.   Regards,   David Wolsefer    -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sanjay DalalSent: Monday, September 25, 2000 12:13 PMTo: [EMAIL PROTECTED]Subject: Cisco versus Juniper at the corelayer

RE: Lab Dress

Title: RE: Lab Dress Dress doesn't matter. Dress comfortably. The only thing I would caution is that the room in Brussels was cold to me, so bring a sweater or jacket. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Scott Benton Sent: Saturday, July 2

RE: FR lmi-type and subinterfaces

to use auto-detect because I had a case where the translations people went and arbitrarily changed LMI type on the frame-relay switches from Cisco to CCITT, which brought down those routers with LMI hard coded, but those using auto-detect made the change with no problem. Regards, David Wolsefer

RE: Frame Relay limitations question

specific platforms. This limit, which is based on the number of internal Interface Data Blocks (IDB), may not be reachable due to memory restrictions on certain routers. For example, a Cisco 2500 keeps its interface buffers in shared I/O memory. Regards, David Wolsefer, CCIE #5858 -Original

FW: [Fwd: Morning]

not have a split-horizon problem. Let me know if you have further questions and we can clear them up. BTW, you do not need to turn off split horizon on point-to-point subinterfaces, only multipoint subinterfaces. Regards, David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL

RE: Paper Vs hands on

ch to start. Since the companies tend to be larger here, i.e. AOL, Sprint, etc, there will be opportunities to move out of a helpdesk position and progress. My .02 David Wolsefer, CCIE #5858 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED]