there (Qwest just went to a fully OC-192 backbone running on the Juniper
M160 platform) you probably dont want to go with AT&T's 100 year old legacy
network ;-)
Ed Dombrowski
""KY"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I think y
Can anybody post some working configs for a 2509 or 2511. I am going nuts
trying to configure a 2509 i just got. I have been using this page as a
reference but i am not having much luck.
http://www.cisco.com/warp/customer/793/access_dial/comm_server.html. I cant
seem to find any other info on the
gt; To:
> Sent: Saturday, 28 April, 2001 12:58
> Subject: Re: Access server configuration [7:2376]
>
>
> > You need to clear the line. Do a show line on the 2509. Anything that
you
> > have not
> > started a session with that has a splat next to it needs a clear lin
is is
especially helpful when i do configurations for customers and they have a
specific feature that they need. I can then look it up and decide which
service pack to add then go to the memory tool to make sure i have enough
for the feature set.
Ed Dombrowski
http://www.cisco.com/cgi-bin/Support/Featu
at the Frame Relay forumn if you want more info.
Ed Dombrowski
""Chuck Larrieu"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> dropped/refused entry because of congestion on the cloud. This in turn
leads
> to the retransmission of dropped pac
and supports both types of interfaces. If you have experience with
this product can you leave a brief review and some pros and cons? Thanks.
Ed Dombrowski
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2918&t=2918
--
F
0%
of original retail. In the long run it will be much cheaper to buy the
Simulator then the real service.
Ed Dombrowski
""Erich Kuehn"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This might seem like a strange answer, but (if available) why
losing connectivity to the router you are working on. Another good thing to
do is go to the CCbootcamp page and take a look at the physical layout of
their CCIE labs. They have 4 set up and it will give you the idea of the
complimentary equipment you need.
Ed Dombrowski
wrote in message
[EMAIL
Below is a routing table from a scenario i am working on. It is for OSPF
over NBMA in Point-to-Point mode over subinterfaces. It is probably an easy
explanation but something i would like to be clear on. My hub location is
the 2521 which is where this table is from. I have three routers connected
Can anybody offer any insight into the advantages or disadvantages of a
ws-x5006 SUP I module (FX uplinks) compared to a ws-x5009 SUP I module (TX
uplinks) in a typical CCNP/CCIE lab environment where the CAT5K is probably
the only switch or maybe there is one other switch like a 2924 xl. In a
sin
I am not sure about the Caslow book but the Doyle books are "Volume" I and
II not different releases. They cover different subject matter.
Ed
""Faisal Athar"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear All CCIEs,
>
> I am using Jeff Doyle.Routing TCPIP I and Bruce Cas
These guys have some decent racks that are not very expensive. Many are
standalone.
http://www.milestek.com/
Ed
""Jon Krabbenschmidt"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have several rack containers made by Engineering Packaging Corporation.
> They are made of ha
some
real good info on the CCbootcamp site on what equipment you will need what
books and preperation strategies. I am not at that level yet but it gave me
a good idea of what i should purchase now for my professional certs that
will scale well into a CCIE lab. HTH.
Ed Dombrowski
""Iy
I dont think there is any such thing as an "affordable" ISDN simulator but i
got the Emutel Solo and it works like a champ. It has configurable S/T or U
interfaces and supports all kinds of switch types. It is comparable to the
Teltone ILS 2000 ($2800) and the price direct from Arca technologies i
I did this lab earlier today and was wondering the same thing. If i remember
correctly router B did not have a network statement to advertise the link
that exists between B and C. If you add that statement router A then learns
about the link thru IBGP and can find the path back to C when you ping
15 matches
Mail list logo