-lists and
*don't* upgrade your IOS without proper planning. I have seen some
overzealous network engineers crash their routers by loading the wrong IOS
for the hardware(DRAM/Flash) they currently have.
HTH
George Murage
-Original Message-
From: Mr piyush shah [mailto:[EMAIL PROTECTED]
Sent
to do is check if you can see your PIM-DM neighbour at the other
end of the SP cloud with the show ip pim neighbor command.
Please keep us posted on how this progresses.
Kind regards
George Murage
-Original Message-
From: Doan Nguyen [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07
Just out of curiosity, why do you want to log *all* ICMP traffic through
your PIX? At logging level 4, you should see logs for selected ICMP traffic
that is characteristic of a reconnaissance attack.
Anyway, I hope you have a large disk(s) on your Syslog server :-)
-Original Message-
Congratulations and thanks for the tips!
-Original Message-
From: Akusika Papaa [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 30, 2003 7:49 AM
To: [EMAIL PROTECTED]
Subject: RE: CCIE # 12026 - Longish [7:73135]
Congratulation and great job.
-Original Message-
From: [EMAIL
determined.
I am not sure if you can achieve the same using PBR; I have never tired it
myself.
Any comments from the others?
Regards
George Murage
-Original Message-
From: Md Nazri [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 11:32 AM
To: [EMAIL PROTECTED]
Subject
of network session such as PPP for all incoming calls.
HTH
George Murage
P.S This is a pretty loose explanation but you can get the details from
Cisco documentation CD - or from somebody on this list who has used the cmds
recently :-)
-Original Message-
From: H T [mailto:[EMAIL PROTECTED
Hi,
You do not need BCRAN to be CCNP. Just BSCI, Switching and CID.
I am also trying to beat the 25th July deadline!
Please see:
http://www.cisco.com/en/US/learning/le3/le2/le37/le5/learning_certification_
type_home.html
Thanks and regards
George Murage
-Original Message-
From
/y on the router.
Regards
George Murage
-Original Message-
From: H T [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 08, 2003 5:49 PM
To: [EMAIL PROTECTED]
Subject: Re: ISDN Port goes to Deactivated mode [7:72022]
Hi,
can you show us your running config of both sides, so we can know where
for uplink traffic.
George Murage
- jvd wrote:
jvd, it's nice to have you on the list.
It looks like you post using the Web site. A lot of people do GroupStudy via
e-mail. They can't tell what your messages refer to. They seem like orphans.
When posting from the Web, please press the Quote button first
for uplink traffic.
George Murage
- jvd wrote:
jvd, it's nice to have you on the list.
It looks like you post using the Web site. A lot of people do GroupStudy via
e-mail. They can't tell what your messages refer to. They seem like orphans.
When posting from the Web, please press the Quote button first
asking? why an ISP would
need a server? for dns is the first example that comes to mind.
btw, 4 more?
scott
George wrote in message
news:[EMAIL PROTECTED]
A computer is to be purchased for an Internet Service Provider (ISP)
that
is
to be used as one of the server at the network backbone
A computer is to be purchased for an Internet Service Provider (ISP) that is
to be used as one of the server at the network backbone. What may be the
role of this server for the ISP?
Can this server be put for other server related applications?
What will be configuration of this server giving
There has been some speculation on the fate of the CCIP track since the
beta testing of exam 642-661 - Configuring BGP on Cisco Routers. Well,
this is what Cisco has to say about it.
Cisco Systems recently adjusted the CCIP (Cisco Certified Internetwork
Professional) program to meet the
Hi there,
I've got a 515UR failover I jus' upgraded from 5.3(1) to 6.1(4). I'd like
to pop PDM on that system(s) and try that interface out.
I'm a command line kind of guy, so am comfortable with CLI, but, I've heard
that PDM is a worthy utility.
Any words of wisdom on PDM installation?
Best,
Hello again!
Now is the/my time to play multi-vendor dot1q tagging. One vendor being
Cisco, of course. Other vendors will be represented by a nameless
nitial --- F at the high-end and S at the edge.
We've all heard about a/the management VLAN, and I've certainly struggled
with my little
Valentine's day marked the 20th anniversary of this event. I thought it
might bear repetition.
--
Upon learing by rote testing products:
--
Here's a little story from the Bering Sea. Bear
try 'q'. I'm not sure if it works with 'no pager'.
George
-Original Message-
From: eric nguyen [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 15, 2003 10:35 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: how to break out of the sequence when in write term or show
running
The CCIE written is not a certification, it is a
qualification exam. No matter how dificult you think
it is, if you can't pass the written you're not ready
for the lab.
--- wexo__la wrote:
Someone should say this already :
There is no experties-checking in any ccie written
exam!
The
Does anyone have experience with Amazon routers from ACC? I need to put a
7206 in-line to replace a failing Amazon and the commands are difficult to
match up to the Cisco world. Any help would eb appreciated.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57802t=57802
Could someone post the show config or show port output from a 2980G?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56960t=56960
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
George
CCIE #9781
-Original Message-
From: Persio Pucci [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 07, 2002 1:38 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Tech Tips
Hey folks,
where did the Tech Tips go that I cannot find it anywhere in the new Cisco
site? Did anybody
What type of server would be good to set up a multicast scenario and
test it out.?
Apple server streaming video, or a advance 2000 server.
What have you done.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50994t=50994
--
FAQ,
and have nothing good to say about them.
What sweet nothings would those be?
On another, but similar, note, what 3d party GBICs for 1000LX single mode
are out there for the Cat 3548 switches? And, are there any sweet
nothings about using those in a Cisco platform?
Very best, G.
Is their a command to view all the ip addresses connected to my switch.
I do a show arp shows a couple
Or how often does ip addresses get added to the switch?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50413t=50413
--
I having problems pinging a host on a different vlan. However I can
access other host that are connected to the same switch?? Trunking is
enable
What can I look for . the device is on native vlan , while I am on vlan
2
Message Posted at:
Hi Folks,
Is anybody willing to trade in a November Lab date this year for next
February?
Regards,
George.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50107t=50009
--
FAQ, list archives, and subscription info: http
IP host RouterB 191.8.150.1 191.8.2.1
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50112t=50112
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
You should try half.com I seen it around $15 bucks used.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Kevin O'Gilvie
Sent: Monday, July 29, 2002 3:40 PM
To: [EMAIL PROTECTED]
Subject: RE: Looking for BSCN in PDF format [7:50039]
You tell him Juan,
Where can I find the multicast address , rip, irgp use.?
I know Ospf is 224.0.5 224.0.6
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50221t=50221
--
FAQ, list archives, and subscription info:
I get this message when I try to apply a policy to my fast Ethernet
interface on a 7513
service-policy is supported only on VIP interfaces with DCEF
enabled
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49466t=49466
--
FAQ,
Got it!!!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Steven A. Ridder
Sent: Tuesday, July 23, 2002 2:04 PM
To: [EMAIL PROTECTED]
Subject: Re: nbar message [7:49466]
turn on dcef or cef.
GEORGE wrote in message
[EMAIL PROTECTED]">new
This command I looked it up at Cisco web site and it says it's a
maintenance operation protocol
But what does it do exactly?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49487t=49487
--
FAQ, list archives, and subscription
I currently have just 2 vlan's in my network. The native 1 and vlan 2. I
have a 7513 doing the routing with a fast Ethernet and 3500xl and 2900xl
in my network. I have one vtp server and I added vlan 2 it works! .
then I created another vlan 3 on the router with ip 10.0.4.1 isl
encapsulation
advertisements are sent and received... sh vtp statistics
HTH,
-Original Message-
From: GEORGE [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 18, 2002 10:44 PM
To: [EMAIL PROTECTED]
Subject: Help with vlan!! [7:49127]
I currently have just 2 vlan's in my network. The native 1 and vlan 2. I
Is their a cisco command that will show you the serial number of the
router
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49152t=49152
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
]] On Behalf Of
MADMAN
Sent: Thursday, July 18, 2002 1:06 PM
To: [EMAIL PROTECTED]
Subject: Re: FW: Help with vlan!! [7:49127]
You have to be either transparent or server mode to add a VLAN. Were
you in client mode originally?
Dave
GEORGE wrote:
I got it to work!!!
The only thing I had
If a router has the configuration setting ser to 0x102 , what would be
the sequence?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49174t=49174
--
FAQ, list archives, and subscription info:
Try it on a mc3810v3 did not work
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 18, 2002 2:33 PM
To: [EMAIL PROTECTED]
Subject: RE: cisco command [7:49152]
hi
use the show diag command in previleged mode
regards
deepak
Message Posted
I would say place an internal router behind the pix so I can route
Your internal network, or vlans's that's the way we design it here
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Jeffrey Reed
Sent: Tuesday, July 16, 2002 7:19 PM
To: [EMAIL PROTECTED]
conduit permit icmp any any
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Juan Blanco
Sent: Sunday, July 14, 2002 9:24 AM
To: [EMAIL PROTECTED]
Subject: Please help me with my new baby(Pix 501) [7:48760]
Team,
I just got my new baby Pix 501
Is nbar supported on layer 3 switches?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49030t=49030
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
by devices such as
routers.
- Original Message -
From: Nigel Taylor
To:
Sent: Wednesday, July 17, 2002 10:22 AM
Subject: Re: blocking spam with cisco routers [7:48971]
George,
Priscilla brings up a good point in that this will not be
easy.
The most important issue here
If I have subinterfaces configured for my vlans' and I wanted a dhcp
server for one vlan can I create the dhcp server and assign it to that
subinterfaces pertaining the vlan in question. I don't have a server on
that vlan
Message Posted at:
Hi all I have a question ,I configured my e-mail server to only accept
local e-mail, and deny other relay , however im still vulnerable to
spam. My question is how do the ips block other e-mail going to their
smtp
Do they do it by access-list? Allowing only the local network with port
25?
Or just
Do they allow the use of a calculator I the ccie written exam?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48860t=48860
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
locally.
Has anyone experienced such a problem and found a solution?
George
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48482t=48482
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
How do you find the ipx address of a novell 4.11?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48505t=48505
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Does the mc3810 support voice over ip as well as voice atm ,or just the
mc3810 v3.
What would be better to be to practice more this model or a 2600 series?
The mc3810 on a standalone what parts are required? If I wanted only to
to regular analog phones FXS interface? I a bit confiused as to the
Does anyone have some cool or useful links to calculate subnetting
including broadcast .
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48552t=48552
--
FAQ, list archives, and subscription info:
I have the 3des encryption disabled do I have to purchase a license to
enable it?
VPN-3DES: Disabled
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=47556t=47556
--
FAQ, list archives, and subscription info:
Yes linksys has that option, I ran into that problem
Its under the advance option
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Lidiya White
Sent: Wednesday, June 26, 2002 9:34 PM
To: [EMAIL PROTECTED]
Subject: RE: Cisco VPN client and NAT [7:47430]
I was configuring nbar for my network and when typing
Match protocol I got this commands
The one that I like the most and look for info on cisco site was
Fastrack Has anyone used it here?
Does anyone have a url or sample config..
arpIP ARP
bgpBorder Gateway
junction with the frame interface-dlci command.
best wishes.
GEORGE wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have a newbie question, regarding frame-relay. When I order a
frame
relay circuit for two locations
Do the telco provide the dlci? Or I make it up? Once
I have a newbie question, regarding frame-relay. When I order a frame
relay circuit for two locations
Do the telco provide the dlci? Or I make it up? Once the frame relay is
installed on both locations I guess using the dlci numbers it makes the
connection , besides the ip and all other stuff
Can
Hi Kevin,
Don't know if this will help but try
rj45-8pin--T1-crossover-rj45-8pin.htm link found on page below:
http://ftp.digi.com/support/techsupport/common/cables/async/
Let us know if it works.
Regards,
George.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
I have two routers connect throgh an ISDN switch.
System image file is flash:c2500-js56i-l.121-12.bin
When I change the address to 135.11.35.0 /24 I can not ping. I verified
that the call went through
11R3#ping 135.11.35.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to
I saw some time ago a link posted here for calculating rifs, would
someone kindly e-mail it?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=47444t=47444
--
FAQ, list archives, and subscription info:
Im trying to configure authentication on my routers so far so good ,
however I would not like to have any type of authentication via
console., just in case and also if the tacacs goes down I can still get
in with local account I created.. so far if I place this on the console
line =line con 0 no
, if you enter your configured enable password you
get
access?
Sounds like it's working as you have it configured, how did you want it
to
work?
Philip
-Original Message-
From: GEORGE [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 18, 2002 5:37 PM
To: [EMAIL PROTECTED]
Subject: authentication
I just configured my router to authenticate with cisco secure every
works ok, except if I try to
Console I get a password promt, and I stop cisco secure I get a password
promt
Now I tried to enter my enable password and wont work
Am I missing something here
aaa new-model
aaa authentication
Hi you all , imp trying to use this config from Cisco web site
http://www.cisco.com/warp/public/110/pix3000.htmland I has some
questions.
Suppose if my network has for inside address 10.254.2.1 255.255.255.248
Those the vpn ip pool have to be in the same network as the inside
address,
Im looking for a configuration example between a pix and a 2000
professional?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=46259t=46259
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
(s)
4 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x210
Regards,
George.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45977t=45977
of the ethernet ports. Looking at some of the
documentation for the 2950, I see references to stacking.
I need to lay off the coffee
George
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=46061t=46061
--
FAQ, list archives
I want to use the Catalyst 2950T-24 in my Windows NT/2000 and Linux network.
According to the specs, it states that it does provide 10/100 autosensing.
I wanted to know if anyone has run into problem with the autosensing
feature. Or should duplex be hardcoded?
Thanks.
George
Message Posted
Is it possible to allow outbound connection to a Microsoft VPN Server (using
MS PPTP) from a client machine behind a PIX 520 (IOS 5.2)?
If so, what are the commands needed to configure the PIX.
Diagram:
client PC - PIX Internet --- VPN server
Thanks.
George
I don't have a vpn accelerator card installed on my pix can I configure
vpn ?
Im trying to configure internet users ability to connect to my internal
network
Probably use this config
http://www.cisco.com/warp/customer/110/pptpcrypto3.html
any suggestions..?
0: ethernet0: address is
If I wanted to apply a access list to allow only networks from
192.168.1.0 to 192.168.7.0 and apply it to the vty lines
is this correct
access-list 101 allow tcp 192.168.1.0 0.0.6.255 eq 23 any
?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45585t=45585
Im going to try it thanks!!!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 30, 2002 5:36 PM
To: [EMAIL PROTECTED]
Subject: RE: Question on Pix and lossing internet conectivity [7:45465]
i had the same problem; it has nothing to do with 5 c
I recently upgraded my pix to version 6.2 and lately I noticed that
some users behind the firewall
Complain that they cant access the internet , or as we should say
outside the firewall
Now whats is interesting is that this problem can be fixed by issuing
the following command
Clear xlate
Is there a way to allow only a certain group defined in your taacas
config to access a router or a Cisco device. I'm asking this because im
using taacas for my dialup users and would like to create another group
like techs to have rights to access a Cisco device
Message Posted at:
Guys,
Will anybody know is ppp multilink is possible over an adsl link and
does it work similar to isdn?
Regards,
George.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=44704t=44704
--
FAQ, list archives, and subscription info
Shucks, folks, 'most everyone knows that the real world has its moments.
Users. They generally provide considerable exposure to that which is
perceived as real.
'Course, it's always nice to have a test-bed; but I think lab rat is a
different definition.
So, perhaps to lighten things up,
Hi users I was wondering if can someone help me out this this problem I
been experiencing
Users behind the firewall can open a session on this web site
http://www.oit.ohio-state.edu/userpass.html
it has a link to a telnet session to a particular port 1607
I create an access-list allowing some
Guys,
Just wondering if any of you will like know where to download an
evaluation copy of the Quality of Service Policy Manager? An immediate
response will be very much appreciated.
Regards,
George.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=44519t=44519
Would anybody know of how resolve and ip phone which just wouldn't
register to the CCM. I can ping from CCM server and all but it keep
going on and on a registering.
George.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=44530t=44530
Thanks for your response. Checked the phones configs and it's all as
expected i.e. IP's for cm server, tftp server etc are just fine.
Any ideas??
-Original Message-
From: Paul Beckman [mailto:[EMAIL PROTECTED]]
Sent: 20 May 2002 17:39
To: 'George Siaw'
Subject: RE: Cisco CallManager
to attempt a connection.
Recommended Action: No action is required if this event was issued as a
result of a normal device rehome..
-Original Message-
From: Rogell, Dennis [mailto:[EMAIL PROTECTED]]
Sent: 20 May 2002 18:44
To: 'George Siaw'
Subject: RE: Cisco CallManager - IP phone
Message-
From: George Siaw [mailto:[EMAIL PROTECTED]]
Sent: 20 May 2002 14:01
To: '[EMAIL PROTECTED]'
Subject: Help. QPM
Importance: High
Sensitivity: Private
Guys
Hi group I have an issue that has come up , and maybe someone can guide
me in making a design much better.
In my central office I have a ls1010 which connects to several 3810 mc
at each campus , its basically an atm network. My question is how come
when im at the campus it take like a minute to
I created a local pool for my dialup users. However once the user dial
in he does obtain an unique ip address but his gateway is the same and
he is unable to ping any router or switch or server once inside the
network
How can I change the setting so that he gets a unique gateway?
Any useful
assumes that you have a 2900XL switch and not a 2901 or
2926.
-Original Message-
From: GEORGE [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 13, 2002 2:37 PM
To: [EMAIL PROTECTED]
Subject: 2900 series swithc [7:44092]
Im trying to trunk a 2900 switch but does not have the
switchport
front to back. Newer at about 10.
All the above assumes that you have a 2900XL switch and not a 2901 or
2926.
-Original Message-
From: GEORGE [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 13, 2002 2:37 PM
To: [EMAIL PROTECTED]
Subject: 2900 series swithc [7:44092]
Im trying to trunk
I trying to upgrade my cisco 2900 switch and according to the
documentation I need at least
This ios 11.2(8)SA4 (Enterprise Edition) to be able to run trunking.
However, on Cisco web site I can find it only up to ios 12.0 which I
can't install because I don't have sufficient dram ,4mbs does
Im trying to trunk a 2900 switch but does not have the switchport option
?
Can the 2900 series handle trunking?
Or only the 2900 xl?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=44092t=44092
--
FAQ, list archives, and
I use Cisco routers and switches throughout my hole network,. I been
learning as I go and read the posts here so far I feel confident in
operating certain hardware models .However, we I have a need to
understand more is the ios, from what I read so far each model and
depending on what you
Can you load balance to pix firewalls?
Has anyone done this?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=42974t=42974
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
I have an Nt server with a 350 pci wireless card and network
connectivity .The nt box has a nic to the local network, I would like to
share internet connectivity , via probably a proxy services?
Has anyone done this before, or can point me to a link with a similar
configuration
thanks
on, place the card into adhoc mode, place your other card
into
adhoc mode, set your ssid's/encryption/etc... you should be good to
go...
-Patrick
GEORGE 05/01/02 02:34PM
I have an Nt server with a 350 pci wireless card and network
connectivity .The nt box has a nic to the local network, I would like
Has anyone here used filtering with the pix, particular the filtering
product n2n2?
Wanted to inquiry as far as performance.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=42852t=42852
--
FAQ, list archives, and subscription
Please reply directed. I am interested in purchasing a proper CCM CDs
preferably with the installation books. Will pay for shipment and I am
UK based.
George.
P.S.
Anybody sat the 3.2 exams? Your views please.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=42539t=42539
Sagely advice from some good sources, especially the last one.
---
Try not to become a man of success, but rather try to
become a man of value. - Albert Einstein
Recognition is the greatest motivator. - Gerard C. Eakedale
Hi Larry did you have a chance to send the info to you ip/tv manager .
he can contact me directly
George Gittins
Internet Systems Manager
Weslaco, Tx 78599
Phone (956)9696557
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Larry Letterman
Sent
Guys,
I have had to revise my earlier request owing to a slight change in my
requirement. The Cisco callmanager starter kit will suffice what I will
like to achieve in a home lab.
So, if anyone has any to sell, by all means reply directly to me.
Cheers - George.
Message Posted at:
http
this work?
George Gittins
Internet Systems Manager
Weslaco, Tx 78599
Phone (956)9696557
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=41758t=41758
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Guys,
I urgently need to buy a secondhand callmanager kit and just wondering
if any of you have one to sell or point me in the right direction.
Thanks - George.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=41630t=41630
What do you need it for? Wanna see if you are still sharp? You must have
got tired of changing light bulbs. I ain't heard from Rob since he left.
Guess he is having fun in New Mexico or wherever he is.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent:
I live in the metroplex. There is work to be had in Dallas. The
criteria for getting it is more difficult. By all means go for
the CCIE. It takes 6-18 months for the sharp people and if it takes
longer don't let it get you down. One of the best engineers I know
took 7 attempts to pass the
Wondering where i can find links to where i can configure the access point
through the console with command line?
George Gittins
Internet Systems Manager
Weslaco, Tx 78599
Phone (956)9696557
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=41339t=41339
im discussing here at my company to deploy ip/tv . has anyone tried it
what do i need. i was reading at cisco web site that you need a nt server
which will have the digitizer card...
George Gittins
Internet Systems Manager
Weslaco, Tx 78599
Phone (956)9696557
Message Posted at:
http
1 - 100 of 530 matches
Mail list logo