Team,
I have the following problem:
Our network has 10 sites, I am in the process of readdressing current
network. I have setup secondary ip address on every site, At the present
time I am setting up a wk2000 dhcp/win server in one site. The problem is
that I am not able to obtain ip address from
that true,
because
> if so, ip helper only works on the primary interface's address and not on
> the clients on the secondary network. It won't pick up the secondary
> networks broadcasts.
>
> --
> RFC 1149 Compliant.
>
> ""J-B"" wrote in mess
nfig to dhcp then. What range is the
dhcp
> server supposed to be passing out, the secondary addresses range, because
it
> won't work either. The DHCP server must pass out the primary address
range
> because that's where the packet is coming from.
>
> --
> RFC 1149 C
Thanks Tim Medley, well put
Mario, you should really concentrate on learning the technology, be able to
understand how it can be utilized in many different
situations and when you take the test, you don't have to think about the
passing grades.
My two cents.
JB,
MCSE, CCNA, CCNP, CCDA,
Switch Setups Opinion
Team,
The following is how we setup our switches in our network in one building:
All ports are configure to full, 10mb and enable port fast
The up link is configure as full, 100, not enable port fast
The rest of the switch configuration is using the default settings (SWIT
Can someone please help me to understand the following terms.
H323 and Gatekeeper. I have a polycom video conferencing equipment and I'm
trying to set up a IP to IP video connection between two cities. The
conection works, but the quality is very bad a lot of jitter and delay. I
was told by the
Im trying to redirect telnet traffic from the pix to my Cisco 2511 terminal
server so I can access the devices over the internet.
I checked the previous post and tried to configure the Pix. However the
traffic gets denied according to my syslog server.
Any help will be appreciated.
JB
Banks in the US are regulated by the FDIC and audits can extend to Internet
Banking.
JB
Robert Edmonds wrote:
>
> I can't help too much with the banks, but I used to run the
> network for
> hospital and supported several doctor's offices that used our
> network. The
> main thing you need to wor
Banks in the US are regulated by the FDIC and audits can extend to Internet
Banking.
JB
Robert Edmonds wrote:
>
> I can't help too much with the banks, but I used to run the
> network for
> hospital and supported several doctor's offices that used our
> network. The
> main thing you need to wor
I wonder about the encapsulation type for the interface?
JB
Xy Hien Le wrote:
>
> I have an issue that took me almost a month and still not
> figure out what's
> the problem?
>
> I can ping out to a connected router (fastethernet or any type
> of interfaces)
> and can only ping the local inter
Encapsulation by default is ARPA.
Can this be changed?
JB
J B wrote:
>
> I wonder about the encapsulation type for the interface?
>
> JB
>
>
> Xy Hien Le wrote:
> >
> > I have an issue that took me almost a month and still not
> > figure out what's
Hi, Everyone
I just been awarded the responsibility of installing 4 3745 Cisco routers.
The local phone company wanted $5500 dollars for the installation and my
employer thinks is to much. I was looking at the Cisco website for sample
configurations but I couldn't find them. I need to share the
John Neiberger wrote:
>
> >>>> J B 5/29/03 8:39:15 AM >>>
> >Hi, Everyone
> >I just been awarded the responsibility of installing 4 3745
> Cisco routers.
>
> >The local phone company wanted $5500 dollars for the
> installation and my
>
J B wrote:
>
> John Neiberger wrote:
> >
> > >>>> J B 5/29/03 8:39:15 AM >>>
> > >Hi, Everyone
> > >I just been awarded the responsibility of installing 4 3745
> > Cisco routers.
> >
> > >The local phone company w
then you might
> be better off spending time on it yourself and
> re-learning/refreshing your
> skills.
>
> How much is your day's work actually worth ? :-) Add it all up
> and see
> what's better for you
> or your employer :-)
>
>
>
> ""J B&q
This question is for people with network management experience.
I have to do a lot of things lately, and one of those things looks like is
project management. The problem is that I'm not a project manager. How do
you normally respond to RFP from clients. I think I understand what an RFP
is, howe
The tunnel must be closed until the ATM opens the transaction.
Check you hex address coming from the ATM.
Terry Martin wrote:
>
> This is a good one. I have a 3640 and a 1721 connected over
> point-to-point T1. Everything is up and up, no problems. Each
> of the routers listed above hav
n
> you would be able to handle the both the voice and data
> internal to the box.
>
> Layer 1 - nothing else works without out it
>
> tlh
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of J B
> Sent: Thursday, M
I ordered a Documentation CD from the Cisco Store more than 2 months ago I'm
still waiting. After two months of emails back and forth they told the CD
is back ordered. I can believe Cisco service can be so bad.
Is anyone out there willing to sell me a doc cd with a recent date.
Thanks
JB
Mes
Can some one help me with this one?
or point me into the right direction!
Rip routes:
100.0.0.0/24
100.1.0.0/24
100.2.0.0/24
100.3.0.0/24
100.4.0.0/24
100.5.0.0/24
100.6.0.0/24
100.7.0.0/24
Redistribute rip into OSPF.
1. routes with an even second octet should be redistribute with a metric of
1
Thanks for the Help
JB
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=56320&t=56313
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL P
Im looking for serious study partner/s in the S/W suburbs of Chicago.
Joliet, Tinley Part, etc.
My lab date is set for April 2003 and I can contribute with the following
equipment
1 Cisco 2520
4 Cisco 2501
1 Cisco 2613
1 Cisco 2502
1 Cisco 2511
Thanks
J barrera
Message Posted at:
http://www
Im looking for serious study partner/s in the S/W suburbs of Chicago.
Joliet, Tinley Part, etc.
My lab date is set for April 2003 and I can contribute with the following
equipment
1 Cisco 2520
4 Cisco 2501
1 Cisco 2613
1 Cisco 2502
1 Cisco 2511
Thanks
J barrera
Message Posted at:
http://www
I have a client mortgage company the would like to connect to the internet
and provide VPN access to the sattelite offices.
Is there any legal or specific requirement they need to meet in order to
allow access to users over the internet. Can somebody help.
Thanks
J barrera
Message Posted at:
ht
Thanks for your help,
JB
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57838&t=57798
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
u only
have to concentrate internet related security at the home office, but this
adds hops and latency. And now the home office needs to consider internal
threats.
This is a high level overview. There are a lot more details involved that
require a lot of time and consideration.
Steve
-Orig
This is a test
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60106&t=60106
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Joseph R. Taylor wrote:
>
> Can anyone recommend quality practice tests for the 640-442
> MCNS certification?
I do not know about the best one, however i will not recommend Beach Front
direct www.bfq.com. They claim to be good, however they are to expensive,
and when I took my test (ommited) the
Help!
How can I find out for sure If I have a bridging loop.
I have 5 2900 XL connected together in a chain and one port connected as a
trunk to a 3550.
Two VLANS Management and Systems.
Performance is very slow when users are trying to connect to the network
servers.
Any input will be appreciat
Help!
How can I find out for sure If I have a bridging loop.
I have 5 2900 XL connected together in a chain and one port connected as a
trunk to a 3550.
Two VLANS Management and Systems.
Performance is very slow when users are trying to connect to the network
servers.
Any input will be appreciat
Help!
How can I find out for sure If I have a bridging loop.
I have 5 2900 XL connected together in a chain and one port connected as a
trunk to a 3550.
Two VLANS Management and Systems.
Performance is very slow when users are trying to connect to the network
servers.
Any input will be appreciat
I need to take all the Cisco security tests and I was wondering if the Cisco
PIX 501 will be o.k to practice and be able to pass all requirements.
Thanks
JB
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54254&t=54254
--
FAQ, lis
I have a 3550 that connects to 5 Cisco 2900 XL L2, and 1 port that connects
to a HP procurve Switch.
Does any have an example in how to set routing between vlans.
For example users on 193.268.1.1 need access to 192.168.2.x and vice versa.
Any help will be appreciated.
=
; >what's the latest I can find though. Let me know if you are
> interested and
> >I'll look around.
> >
> >Thanks,
> >
> >Zsombor
> >
> >At 04:45 AM 6/26/2003 +, J B wrote:
> >>I ordered a Documentation CD from the Cisco Sto
Can someone recommend a couple of good choices for network sniffer software.
My company is looking to buy a sniffer to develop a LAN baseline.
Any recommendations will be appreciated.
Thanks
JB
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71523&t=71523
--
Thanks
JB
Daniel Cotts wrote:
>
> EtherPeek from WildPackets, formerly AG Group.
> www.wildpackets.com
>
> > -Original Message-
> > From: J B [mailto:[EMAIL PROTECTED]
> > Sent: Friday, June 27, 2003 8:03 AM
> > To: [EMAIL PROTECTED]
> >
Thanks to everyone!
We are going to evaluate your recommendations.
JB
dre wrote:
>
> ""J B"" wrote in message ...
> > Can someone recommend a couple of good choices for network
> sniffer
> software.
> >
> > My company is looking to buy
I'm not really familiar with IPX and I have to connect 3 remote branches to
a central site where the Novell server is located.
Can anybody point me to some sample configurations.
Thanks
JB
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73113&t=73113
--
Thanks for your help.
JB
"Chuck Whose Road is Ever Shorte wrote:
>
> ""J B"" wrote in message
> news:[EMAIL PROTECTED]
> > I'm not really familiar with IPX and I have to connect 3
> remote branches
> to
> > a central site where the N
39 matches
Mail list logo