Hi,
I checked on cisco.com and found IS-IS is supported in IOS
software feature sets Enterprise Plus and Service Provider.
With kind regards
Jens Neelsen
--- irfan siddiqui wrote:
I am trying to run ISIS on a 2600 series router however it
does not accept
the CLNS and ISIS routing commands
Hi,
try Wordpad. It can also open files created by copying the
configuration via tftp.
Jens Neelsen
--- Zsombor Papp wrote:
I often use Notepad for this. What exactly happens when you
say you can't
open it?
Or are you asking how to get the config out of the router?
Check out the
'copy
is sold on ebay.com (mostly older
versions).
With kind regards
Jens Neelsen
--- maine dude wrote:
Hi,
I want to get hold of the Cisco Learning Product folders you
get when you
sit on a Cisco official learning course.
I find them much better to read then the Cisco press books.
Does
you have a route in your other back to this router
(Entires in the routing table are oneway only). Try show ip
route to verify.
With kind regards
Jens Neelsen
--- Projet AIM wrote:
Hi again
I am pretty much thanksfull for your explanantion
I have tried what you have suggested and still
Hi,
which commands do you use to load the IOS into the router? From
IOS or ROM Monitor? Please email me a complete log.
With kind regards
Jens Neelsen
--- Alex wrote:
Hi
I was trying to upgrade IOS on 2501 router with 16MB flash and
16MB RAM, new
IOS image requires 16/16 according
).
With kind regards
Jens Neelsen
--- Rajesh Kumar wrote:
Hello all,
I see this message upon bootup on 85K router - System INIT -
Insufficient memory to boot the image. I suspected the
processor board
and replaced with the known good one. But still it keeps
coming. Any
idea of what exactly
Hi,
I suggest to upgrade to the new versions (PIX 6.3 and PDM 3.0).
Then the browser command is //https:
Connect your PC to the inside network (Port 1).
With kind regards
Jens Neelsen
--- Kenan Ahmed Siddiqi wrote:
Hi there,
I have a PIX 515E. I am trying to use PDM
Hi,
the normal way is to have an experienced certified instructor
from a Cisco Learning Partner with the original coursebook from
Cisco and the necessary lab.
Jens
--- Robert Raver wrote:
Hey,
I have been given the duty to teach a CCNA class. Have any of
you done this
before? I was
Hi,
Yes, it is one D channel per PRI. An E1 has 32 timeslots of
64kbps (=30B +1D +1timing). A T1 PRI has 24 timeslots + rest
(=23D +1D). Timing is in the rest.
You can save D channels if put more than one E1/T1 in a bundle.
Then you need only one D channel per bundle.
So the answer is: not
and VoIP accounting.
With kind regards
Jens Neelsen
--- Johan Hjalmarsson wrote:
I would like to log all failed (and maybe even all successful)
login
attempts on a router to my syslog server, but I can't find a
way to do this.
Since I'm using a local user database, with login local on the
VTY, I
Hi,
the reason is that the serial interface with encapsulation
frame-relay is a point-to-multipoint interface by default.
Inverse ARP allows multiple DLCIs.
If you want to use point-to-point links, you have to use a ptp
subinterface. But then you cannot use inverse arp (it only works
on the main
just to configure the switch.
Jens Neelsen
--- Adam Grimes (adgrimes) wrote:
I think the best bet for you would be to start buying the
10/100Mbps
switches and manually setting the PCs to 10Mbps.
That way you havent wasted money on expensive 10Mbps switches
which
(when Cat5 cable is eventually
. 10 kbps for
FastEthernet).
Jens Neelsen
--- Projet AIM wrote:
Hi all,
I am working on a cisco 3620 router and I am trying to limit
bandwidth on
the FastEthernet interface with the Bandwidth command but I
still have a
superior rate than the one I choose can anyone please help me
( I
one IP subnet
on a VLAN. But as with router interfaces the subnets of the
VLANs cannot overlap.
A 5000 switch with RSM works in the same way. This is covered in
the Cisco BCMSN training course.
With kind regards
Jens Neelsen
--- Stephen Hoover wrote:
Say for instance I have 2 hosts
NT server with
software and the most difficult part to get.
Jens Neelsen
--- K Ali wrote:
Hi guys,
Please help me to know the minimum requirement for running
Cisco IP
Telephony labs. What are the minimum reqruiement. At the
moment I have got 3
2509 and 1 2600 series router modular one
/products_command_reference_chapter09186a00800ca7eb.html
Jens Neelsen
--- paul dong so wrote:
Hi all,
while practicing frame-relay lmi-n39x commonds, i can not make
the commonds work as they are supposed to be.
Scenario:
frame-relay switch RA
on RA, use lmi autosense. basic FR function works fine
Hi,
the PIX used in the labs is one or two PIX 515 with three or
more interfaces. I bought a 501 because of the price. But I do
not have a DMZ and I cannot failover between two Firewalls.
Jens Neelsen
--- K Ali wrote:
Hi all,
Just want to clear that which Pix Firewall is being used
.
With kind regards
Jens Neelsen
--- Richard Burdette wrote:
K,
I recently went through this thought process myself and in the
end went with
the 5000 series. I based my decision of several items;
1. I already had a 5000 switch.
2. CCNP switching track knows nothing of the 3550
3
Hi,
you need a Cisco ACS server for AAA authentication via TACACS or
Radius. In the ACS Server you specify thast you want to use the
Windows 2000 user database.
Jens Neelsen
--- giri g wrote:
I have setup the Easy VPN in 827 router(CPE) .I am able to
configure
Extended authentication
Hi,
disabling STP is not recommended. Use Portfast instead. VTP is
only on trunk ports active. HSRP is configured per interface (on
router). What do you want to achieve?
Jens Neelsen
CCNP, CCDP, CCSI
--- Larry Letterman wrote:
disable STP on the port...
--
Larry Letterman
Network
If you have a flash card formattet on a 3660 router try to read
it on your 3640. Cisco has 3? different filesystems for flash
cards. E.g. the format on a 7000/7500 or 6500 router / switch is
different than on a 3640. Try to search cisco,com for flash card
filesystems.
Jens
--- Erick B. wrote:
Try this link:
http://www.cisco.com/en/US/products/hw/routers/ps341/products_tech_note09186a00800a7515.shtml
It should be ok, but check the IOS version!
Jens
--- Erick B. wrote:
I use bnfs95 still but it was always an unsupported
tool. Not aware of anything for 3com NetBuilders
though. Old
Hi,
Cisco Works and some third party utilities provide this
function.
Jens
--- Mr piyush shah wrote:
Dear all
I have been assigned the task of copying a series of
configurations in a router on a daily basis .I am
tired of giving copy startup-config tftp command in
each router . I was
answer1
What variable will determine the Router that it is chosen
Regards
BF
Jens Neelsen wrote in message
news:...
Hi,
it is the number called. You have to configure:
# int bri 0/0
# isdn answer1
Jens
--- Bruno Fernandes wrote:
Hi,
If I have 2 routers
--- Jens Neelsen wrote:
Date: Wed, 15 Jan 2003 11:24:10 -0800 (PST)
From: Jens Neelsen
Subject: Re: VERY URGENT!! IOS loading [1:11688]
To: apc_inf apc_inf
Hello,
please do a show flash command and look for the size of the
IOS image and the checksum. I suggest to reinstall the IOS
Hi,
what is the IOS feature set used in these two routers?
You need a PLUS feature set to support ATM.
With kind regards
Jens Neelsen
--- Newell Ryan D SrA 18 CS/SCBT
wrote:
You said that you got the sample configuration from cisco. Do
you have the
link?
I would like to look at something
Hi,
it is the number called. You have to configure:
# int bri 0/0
# isdn answer1
Jens
--- Bruno Fernandes wrote:
Hi,
If I have 2 routers on the same NT wich parameter defines what
router
will answer the call ?
Thanks in advance,
BF
[EMAIL PROTECTED]
27 matches
Mail list logo