Hi Group,
I have recieved so much insight and help from this groupstudy that im
hoping that there is a simular groupstudy for sniffers/packet decoding etc.
. Does anyone know of such a group, list or message board?
any replies would be appreciated!
Jerry
_
FAQ,
I am having a problem that I'm hoping someone can shed some light on. I have
a 256k frame relay ckt that if i configure for s0 it will show int s0 up and
line protocol up but won't allow me to ping int s0's ip address . If I
configure the frame relay on a sub in s0.1 point-to-point , the s0 will s
I am having a problem that I'm hoping someone can shed some light on. I have
a 256k frame relay ckt that if i configure for s0 it will show int s0 up and
line protocol up but won't allow me to ping int s0's ip address . If I
configure the frame relay on a sub in s0.1 point-to-point , the s0 will s
If i have a 256k host ckt, how many remote 256k ckts with a cir of 64k can
i have pointing at the host before i have an over utilization problem? Will
the cir of the host be a key factor?
Thanks for any and all replies,
Jerry
_
FAQ, list archives, and subscript
Has anyone ever configured a router for connection with internet america? if
so can you show an example config? I am getting NO help from internet
america and they make it seem like this is impossible to do. I would
appreciate any and all replies!
Thank you!
Jerry
___
ok here is the situation , I have an 804 isdn router in the field that dials
into the host router here at the office lets say the 804 in the field is :
customer1 its ip address is e0 150.5.56.1 and the bri is 150.5.1.56 . In
the host router i have the statements: username customer1 password
Hello Group,
I have recieved several bills from telco that show an accessive amounts of
incoming calls from ISDN routers in the field, but most of these routers are
"nailed up" since there is no per minute charge and only charged per
connection, my question is how can I found out where all of the
> Hello Group,
> I have recieved several bills from telco that show an accessive amounts
> of incoming calls from ISDN routers in the field, but most of these
> routers are "nailed up" since there is no per minute charge and only
> charged per connection, my question is how can I found out wher
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
appreciated!
-Original Message-
From: Jerry Deer [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 11, 2001 11:15 AM
To: '[EMAIL PROTECTED]'
Subject: no remote authentication for call out? trouble shoot this
_
FAQ, list archives, and subscription
Does anyone have any experience with the linksys cable/dsl router ?
http://www.linksys.com/products/product.asp?prid=163&grid=5
i
They state you can plug an analog line in the back and use net2phone to make
long distance calls at a very cheap rate. Im wondering what the catch is and
if it is worth
Hello Group,
I am a little concerned about security these days and was wondering if
anyone had links that address this issue. I dont want anyone attacking my
killing my network and cant just rely on firewall.. right?
Thanks for any replies!
JD
Message Posted at:
http://www.groupstudy.com/form
Does anyone have any experience with the cisco secure ids intrusion
detection? (formerly known as net ranger) We are considering this solution
for router security and was hoping someone could fill us in on the pro's and
con's .
Thanks for any replies!
Jerry
Message Posted at:
http://www.grou
> If i know a username how can i find out what computer or ip address they
> are at?
> Also if i know the ip address or computer name is there a way to find out
> what users have used that pc or are currently logged on (remotely of
> course) I have tried nbtstat -A in the past but it does not alw
Dennis Olson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 20, 2001 8:31 PM
To: Jerry Deer
Subject: Re: off topic - how do i find out what computer a user is at or
ip [7:9254]
When you go into WINS manager under administrative tools (provided it is
installed) you can sort by IP address, Machine
Hello All , I am having problems running over a " fast " satellite
connection. I do a speed test from the pc hooked to the satellite equipment
and the actual satellite connection is getting average 700k BUT as soon as a
slap on the ol watchgaurd vpn solution it and hook a computer to that the
spee
To make our vpn connection work the satellite/isp provider had to open
certain ports to make our vpn connections work in the first place . does
anyone have any ideas as to what they may have blocked or not configured
correctly to make the connection so unbearable slow? I know our watchgaurd
sohos
> Hello all, I am having a problem that i am hoping someone who has had
> same experience can shed some light on. I have a laptop that i use at my
> office and at home through frame relay network to my office ( using dhcp )
> The problem i am having is the laptop keeps the default gateway of the
Hi Group,
is there anyone familiar with CNS/AD Ciscos Networking Services for Active
Directory ? if so can you give me a brief discription of what this is/does ?
or steer me in the direction of a website that would answer a few questions?
thanks,
JD
___
UPDATED
I would like to some packet level network analysis training. does anyone
know where this is available can can point me in the right direction?
thanks,
JD
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription
Hi Group,
we have several remote locations using vpn using pipleline 75's with
Ravelin units for security. The problem is when we lose the isdn
connection or if the dial in number changes without us knowing , we have to
make a trip out to that location to make config changes or troubleshoot. At
I have a 64k point to point ckt running from point A to Point B with Adtran
tsu on each end connected to the telco's dmarc with a straight through
cable. I have alarm lights on both tsu's. both are properly configured as
our other tsu's are. here is the puzzling part the telco says they can test
g
I currently have the following set up :
a cisco 7513 handles all frame relay traffic ( about 30 384k ckts)
and a cisco 3640 with 4 pri's(96 channels) that handles all the isdn router
dial in traffic
( as a side note an ascend max with 2 pri's handles incoming analog and isdn
traffic from pc dial i
When telco refers to hard loop on a ckt as opposed to a loop on a ckt... can
anyone tell me the difference?
thanks,
JD
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Rep
Prescilla, I wanted to let you know that your suggestion to use a personal
firewall to control unwanted port usage on the LAN lead me to a very nice
solution. I found a program called portslock that basically gives you
control regardless of if its on a frame relay or local area network. Thank
you!
I used to download configs from cisco router make changes to such as spids
and then -copy tftp start- and wr mem so the changes would be saved to start
config and not affect the current running config so when router was
unplugged and taken to new location it would work with new isdn line.
Now whe
Is there anyway to upgrade a 2500 router ios using a frame relay connection?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18632&t=18632
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Re
I had the same problem and same solution with a 3640 last year.
-Original Message-
From: Paul Jin [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 05, 2001 4:37 PM
To: [EMAIL PROTECTED]
Subject: RE: Symptom: 3640 router reboots itself over and o [7:18686]
A little while back, we ha
I have a few remote locations that occasionally experience odbc errors while
running a certain Sql application. Of course fingers are automatically
pointed at the network however after I test it seems very response( this is
a vpn/dsl network). Any ideas on how to locate problem here or if it is
ne
End user says - unable to connect to Sql server or write(0)
-Original Message-
From: Art Davis [mailto:art-davis@;ieee.org]
Sent: Wednesday, October 16, 2002 8:50 PM
To: [EMAIL PROTECTED]
Subject: RE: odbc error caused by network?! [7:55706]
Do you know which SQLState value the error is
puts this problem into words better in case my email dont make sense.
Portion of article below:
***Unavoidable half-second delays as signals bounce off the satellites can
wreak havoc with IP Security because it takes so long for TCP
acknowledgement to get back to the sending machine. TCP interprets
Paul , I may be having same problem and our email is being spam filtered
however I think our method is adding an XM to the header and those are then
sent to a folder called " possible spam " but I do not see any of the
groupstudy emails. I am receiving a small portion of emails though.
Hello Team,
I am looking for a router security program that will automatically email me
if a change is made. Can anyone recommend such a program? The smaller the
better but don't mind if it is a tool in a bigger program.
Also I was wondering if there is any kind of port management tool that can
den
config changes? also software port
[7:61720]
If you're looking for a small, free solution then set up Cisco's free
Tacacs+ for linux, set up AAA on the router, log to a file, and run swatch
or logwatch to email you when changes are made.
JR
--
Johnny Routin
)?)
-
&q
Cattools by kiwi!
-Original Message-
From: Kerry Ogedegbe [ MTN - Portharcourt ] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 16, 2003 3:12 AM
To: [EMAIL PROTECTED]
Subject: Automated Script for backing up Cisco configs and Image [7:61188]
Hello People,
Can anyone help me with were
lso software port
[7:61704]
""Jerry Deer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am looking for a router security program that will automatically email
me
> if a change is made. Can anyone recommend such a program?
rancid. http://www.
Bingo! I love the personal firewall suggestion and may give that a go! I
agree that some folks get pretty creative when trying to outwit you in this
area and seem to take it personal as if its totally your idea.
Thanks for the suggestion have a good Thursday evening!
JD
-Original Message-
Wow I like the way that looks and re-reading web page now. Thank you for the
suggestion!
Have a good Thursday!
JD
-Original Message-
From: COULOMBE, TROY [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 23, 2003 5:42 PM
To: 'Jerry Deer'
Cc: 'GroupStudy'
Subject
Hello All , I am looking into two litte projects
1. automatically retrieving the config of a 7500 router on a daily basis -
is there a windows based solution anyone knows about for this? If so i would
be interested in purchasing software. If not , any suggestions?
2. setting up a router log s
Hello all, I have a 384k circuit that I used DU meter to test dl speed and
got about a 50kbs download. I have got to do something about this QUICK so
hoping someone can point me in the right direction. I need to actually
verify it is a problem with the circuit and then of course remedy it if it
i
40 matches
Mail list logo
