Before adding authentication into the mix, I would remove it and start
working from the physical layer up. Which router is supposed to provide
clocking? Don't you need the "clockrate" keywork on the DCE?
Mario
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent:
Ok, something is not right with this output. I am assuming that this
capture was taken when your serial interface was up and working and that
your ISDN interface is not shutdown. The output of the show interface
should not be showing administratively down and the output of the "show
isdn status" s
. Everything works internal. Any help would be greatly appreciated.
JunoGuy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42012&t=42012
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
Having a default static route and using the "redistribute static subnet"
command does not work. This is just the way Cisco implementation is. I
have run into many of these issues and I have always had to use the
"default-information originate " command.
JG
Message Posted at:
http://www.group
Thanks. I will check the links out and get back with you if is something I
can use.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42043&t=42012
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
This is because adding a default route does not work (like you have seen).
Cisco does not support this and the only way to get it to work is by using
the "default-information originate ".
JunoGuy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
We sell these pretty cheap. If you are interested, send me an email offline.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42236&t=42209
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Rep
The accounting information will only be sent at the location where the user
gets authenticated. Typically the authentication is done on the LNS.
JunoGuy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42238&t=42193
--
F
You can not redistribute the default route into OSPF. You MUST use the
"default information originate" command in order to redistribute a static
default route into OSPF. Every other route (non-default) will be
redistributed without any problems.
Message Posted at:
http://www.groupstudy.com/for
and TCP) to the PCa internal 192.168.10.5 IP address.
Please help. TIA!
JunoGuy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42351&t=42351
--
FAQ, list archives, and subscription info: http://www.groupstudy.
IP nat statements are looked at before
access-list deny statements are? Thanks for the explanation.
JunoGuy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42380&t=42351
--
FAQ, list archives, and subscription in
Can someone tell me what the passing score is on the CCIE written part of
the beta exam? Also, how many times can you take it and do you have to wait
a period of time in between taking it?
TIA,
JunoGuy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42653&
Can anyone tell me where I can locate the serial number for a Cisco 6160?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=43390&t=43390
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
I do agree with you on this however the I was referring to the "boot
camp" courses. Had I taken all the courses individually that I took at
boot camp I would have gained a lot more from them. During boot camp
you only learn the very minimum needed to get you throught the exams.
If you have the op
Thanks Kim.
I had read figured out what I needed to do after a few trial and errors.
I appreciate you and all who replied to my post. Happy 4th.
Mario
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Kim Graham
Sent: Friday, July 04, 2003 6:35 PM
To:
Hi Jason,
PBR is used to override the routing table. So if you have a Policy on
an interface to set the nex-hop explicitly then any traffic that matches
your route-map that the policy is calling will have a next-hop set to
what YOU specified not what the routing table states.
Mario
-Origin
16 matches
Mail list logo