Erich,
Try the below link. About one-third of the way down the webpage, there are
multiple articles involving the setup of the DSL WIC.
http://www.cisco.com/warp/public/794/index.shtml
Once you have an understanding of the what information is required to setup
the DSL WIC, you will have to
Anthony,
From what I read in your post:
Cable Modem Inside - 172.16.1.1/16
Pix Outside -172.16.1.1/16 (you have 172.161.1.1/16 below)
Pix Inside - 10.1.1.1/24
default route: in your post route outside 0 0 172.16.1.2
what it should be route outside 0 0 172.16.1.1
To all,
I had a lot of fun with a Pix 501 in the month of March/April. After a few
posts here and working with the suggestions received, the problem was
narrowed down to the following:
- Initial configuration of Pix, using DHCP on the inside and outside
interfaces.
- Pix software version
Group,
The Pix 501 is running the default NAT/PAT configuration. Through it, I can
check email using Outlook to talk to an Exchange Server, telnet and SSH to
devices, and browse the web provided I type in the ip address of the web
server. All requests for URL translation by a DNS server
Manager
CCNP, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~
http://www.RouterChief.com
~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~
-Original Message-
From: Justin C
Jerry,
Check the code revisions on your Watchguard products. The SOHO units are
specified by Watchguard at 500Kbits/sec of 3DES throughput. See if
Watchguard support has anything to say with a specific question about that.
Sometimes Watchguard is really on the stick. Sometimes they
Danie,
I built my home lab entirely from Ebay. There are some good vendors on
there, but the phrase buyer beware always comes to mind. I always look at
the sellers feedback, not just for positive ratings but to see if they have
sold equipment in the dollar value I am purchasing. Look to
Our main facility (Los Angeles) has a T1 FR with Pacbell (SBC). In the
seven months I have been running the the IT department, I have seen the T1
go down twice. Once was due to the re-routing of the phone lines that come
into the building. The building is 70 years old, and the lines used to
Beth,
If you have a Firebox (not a SOHO), you can use the Host Watch feature of
the Watchguard Live Security System (LSS) to monitor all connections through
the Firebox live. It will display the source/destination IP address as well
as the destination port. Give the Firebox a minute to
Paul,
Please forward an address, I would like to contribute.
Happy Holidays,
Justin Cluer
_
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Message Posted at:
Paul,
For the past few months, I have taken advantage of the extremely valuable
database at Groupstudy. In early November, I took the CCDA exam and passed.
Two questions on that exam were topics covered in the discussions here. I
have the CCDP and the CCIE Written exams coming up this
Nigel,
Congradulations on your achievement. It is always nice to read about this
kind of accomplishment. It reminds the rest of us who aspire to meet and
conquer this Herculean challenge that it can be done.
With the holidays just around the corner, I hope you find time to relax and
to
Group,
I have searched for a Cisco Users Group in the LA/Orange areas online, but
have yet to find anything. This thread leads me to believe that there is
one. How would one go about joining?
Regards,
Justin Cluer
From: BC
Reply-To: BC
To: [EMAIL PROTECTED]
Subject: Re: Cisco Users
Jerry,
I have yet to send anything to the group, so I hope this comes through.
When using Win2K with the Watchguard, there are few things to be mindful of.
1 - If you have not already, upgrade to version 4.61 of the Watchguard Live
Security System (LSS). For those of you who do not know and
14 matches
Mail list logo
