Will the ccie writtn exams aailable from different [7:34998]

Hi All, I am preparing for CCIE written.Practice exams are available frommany website, could anyone please tell me, do these help and if so which website would you recommend. Thanks in advance, Neil K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34998&

Debug ISDN q921 or debug isdn q931 [7:36837]

Hi All, I want Troubleshoot a ISDN connection to my 3600 series router, The Router has just one ISDN connection and rest are ATM PVC's.My question is , will the use of debug ISDN q921 and q931 be the right option or will it be so severe to bring down the router considering the router is in produc

Re: ISDN [7:37123]

ebay.com. ""mindiani mindiani"" wrote in message news:[EMAIL PROTECTED].; > Where can I buy an ISDN simulator for my home LAB ?. > > > > Chat with friends online, try MSN Messenger: Click Here Message Posted at: http://

Re: Stupid 2500 confreg question [7:37287]

Reseat the Flash and the memory. This solved my PIX issue. neil ""Craig Columbus"" wrote in message news:[EMAIL PROTECTED].; > The cable is good and scroll lock isn't on. Same PC setup and cable work > fine on other 2500 series. I haven't run into this particular issue before. > > Craig > > >

Re: CCIE written -Query [7:37247]

You are right, No going back and they don't specify choose "3" or "4" they say choose all that apply. neil ""Chhetri Naresh"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Gurus, > > Need some info about the written exam, > > is the written exam like other cisco exams where

DEC VAX Nework and IP Network [7:39404]

Hi All, What must be done so that the IP network on Ethernet can talk to VAX Servers.? Also what do the DECserver 250 boxes do ? Any help will be appreciated. Neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39404&t=39404

difference between Connection trunk, Connection Tie-Line [7:62355]

Hi Folks, Can anyone please explain the difference between using Connection Trunk and Connection Tie-Line as applied to a FXO to FXS connection between two routers.Any good Cisco Links explaining the differences will be great. Thanks, Neil I. Message Posted at: http://www.groupstudy.com/form

Re: BGP question. [7:62519]

Rajesh, Check the next hop for the BGP routes and see if it is reachable. If not you can use next-hop-self command to fix the issue or have IGP reach that next hop address. Hope this helps. Sunil Soporie ""Rajesh Kumar"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all, >

PIM Sparse-dense-mode configuration [7:63146]

Folks, I am having problem configuring IP PIM SPARSE_DENSE MODE over a Frame Relay network.The network looks like R1(s0)--FR--(S1)R4(S0)--FR---(S0)R6(e0) igmp group join(224.4.4.4) R6 has two dlci's configured on physical interface one pointing to R4 and the Other to R2.

can u summarize area 0 [7:63365]

Folks, Can area 0 be summarized in OSPF ? Thanks, Neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63365&t=63365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and

1720 crashing every week [7:66080]

Hi Folks, I got two 1720's connected with a two bri's. I am running PPP multilink on them, it is basic ISDN setup with PPP Multilink,Also I have set up a very high idle-timer on the dialer interface just to keep them up indefinitely, but the routers crash every week and I have to manually reset th

1720 crashing every week [7:66080]

Hi Folks, I got two 1720's connected with a two bri's. I am running PPP multilink on them, it is basic ISDN setup with PPP Multilink,Also I have set up a very high idle-timer on the dialer interface just to keep them up indefinitely, but the routers crash every week and I have to manually reset th

VPN CONCENTRATOR Parallel FW [7:66819]

All, I am planning to put a VPN concentrator parallel with a Firewall.The problem I am concerned about is the default gateway on the servers and other workstations. Since the concentrator is sitting parallel to the FW, The servers have a router which is on the same subnet as the Firewall inside i

Re: VPN CONCENTRATOR Parallel FW [7:66819]

Joseph, In this scenario all you had to do is specify the TUNNEL DEFAULT Gateway on the Concentrator, Is that right. Also In site to site VPN case, the remote site can get the DHCP addresses from the servers if we define helper address on the remote site VPN router...right ? Thanks, neil ""

.T destination pattern [7:70271]

Guys, In a FXO gateway scenario can we use a destination-pattern of .T under the FXO port on the gateway so that we can call phone numbers less than 10 digits or more. THE configuration is like this Cisco 2600 (FXO) Cisco 2600 ( FXS) | | | |

LLQ on Ethernet subinterfaces [7:70020]

Can somebody tell me how to configure LLQ on Ethernet subinterfaces connected to two VLAN's. Will appreciate it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70020&t=70020 -- FAQ, list archives, and subscription info: http://ww

FXO to FXS gateway ........... [7:67352]

ias exec siib sh ip int brief alias exec sr sh runn alias exec svp sh voice po neil K Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=67352&t=67352 -- FAQ, list archives, and subscription info: http://www.groupstudy.com

FXO cfg. [7:70403]

Guys, In a FXO gateway scenario can we use a destination-pattern of .T under the FXO port on the gateway which uses FXO ports to connect to Telco, so that we can call phone numbers less than 10 digits or more. THE configuration is like this Cisco 2600 (FXO) Cisco 260

VPN and VoIP [7:70640]

Hi, Cisco IP phones can be used as remote extensions in which case you can have a Cisco IP phone at home and have the same extension as you have in the office. Can this be done with the following setup. DSL modem at home connected to a small switch. The home PC and the IP phone connect to the Swit

Traffic generator for Testing QoS features [7:70864]

I want to test QoS features on a router, and am looking for a good traffic generator which can generate different kinds of traffic. Any recommendations? Thanks, neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70864&t=70864 -

Ethernet Interface Collisions Incresing rapidly [7:71176]

One of my Cisco router's Ethernet interface connected to a Cisco Wireless Bridges has the interface collisions counter increasing rapidly. Over a period of 48 hrs the collision counter was 60,000 and the output error counter was more than 4. Both the Ethernet interface on the router and the Cis

Re: Ethernet Interface Collisions Incresing rapidly [7:71176]

ys that no more than 0.1 percent of frames should experience > collisions. How many frames have there been in the time that the collisions > went up? How does that compare to your baseline? > > By the way, why do you have the interfaces set to half duplex? Why don't you > set them them to fu

Re: Ethernet Interface Collisions Incresing rapidl [7:71176]

collisions increasing rapidly, and hence the question. Thanks, neil ""Priscilla Oppenheimer"" wrote in message news:[EMAIL PROTECTED] > neil K wrote: > > > > The Cisco bridge operates in Half-duplex and that is why > > half-duplex. The > > Rou

VPN Design [7:44953]

Hi All, 1. Could anyone please tell me what needs to be done on the PIX firewall if the Cisco VPN concentrator is placed in such a way as the public interface is in the DMZ and private interface on the inside network. 2. This design of placing the Concentraor in the DMZ is a little complex as com

VPN Design Questions [7:45028]

1. Could anyone please tell me what needs to be done on the PIX firewall if the Cisco VPN concentrator is placed in such a way as the public interface is in the DMZ and private interface on the inside network. 2. This design of placing the Concentraor in the DMZ is a little complex as compared to

Re: CCIE Written passed - Boson [7:45535]

Hi Alex, Congratulations. I am also planning to take the CCIE written next month.I don't have any material from Boson or from anybody else. Could you please tell me which book to follow for the QoS / performance, and how much of this stuff is asked in the exam. Also is the will Boson Material hel

frame-relay traffic shaping [7:55432]

Hi Group, Can someone please explain to me the difference between cir and mincir.Any help is highly appreciated. Regards, neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55432&t=55432 -- FAQ, list archives, and subscriptio

Re: FR V/S Leased line [7:56764]

Checkout the definition of the Leased line and Frame-Relay, I am pretty sure that it will give you an idea about the advantages and disadvantages. Neil ""Hitesh Pathak R"" wrote in message news:200211030552.FAA27439@;groupstudy.com... > Dear Group, > > Does anybody know a url on the web which giv

Re: 2950 EMI [7:57499]

NO. neil ""Arni V. Skarphedinsson"" wrote in message news:200211151017.KAA25359@;groupstudy.com... > I have a simple question, can the Catalyst 2950 switch with a EMI Software > Image Route i.e. does it become a L3 swithc when the EMI images is loaded, > like the 3550 can with the EMI Image. > >

FXS to key-system connection [7:57522]

Hi All, How can you interface the FXS to the key system.I mean FXS provides dial-tone so I was thinking only a phone or fax can be interfaced to an FXS port. Can anyone explain. Thanks in advance for your help. neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57522&t=5752

VoIP Testing :MOS Vs PQSM [7:58061]

Guys, VoIP Testing, do you go by MOS or PQSM. I mean when testing VoIP will perform on a network before implementing it. There are many tools that give a MOS score and many other tools give a PSQM report. What do you recommend? Thanks, Neil K. Message Posted at: http://www.groupstudy.com

FXO ports to connect two PBX's [7:58410]

the router at location "B" and have VoIP run between the sites. The setup would look like this PBX to FXO --Frame Relay FXO to PBX. Any help will be highly appreciated. Thanks, Neil K. Message Posted at: http://www.gro

Re: CCIE written [7:58400]

It is very difficult, although the passing score is low ( less than 60 %) but you got to work really hard to pass it. neil ""saj"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > Just want to know whether anyone has attempted CCIE > theory and lab recently.Whether there are

extended access-list in/ out [7:58750]

guys, Please explain, how to apply extended access-list so as to permit inbound and outbound telnet access. I want to apply the access list to same interface in and out. Thanks, neil. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58750&t=58750 -

VPN Concetrator #3030 [7:58982]

Hi All, Few questions regarding the VPN Concentrator 1. what do I do for Redundancy, ( VPN Redundant Bundle) 2. Load balancing 3. Where to put the Concentrator ( prefer putting the VPN Concetrator behind Firewall).What are issues I will have to consider if I put the concentrator behind Firewall.

Virtual-link and area range command [7:60408]

Guys, How do I summarize a virtual link using area range command so that I can see the routes in RIP domain. Thanks, neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60408&t=60408 -- FAQ, list archives, and subscription inf

OSPF DEMAND-CIRCUIT, not stopping the link UPDOWN [7:60719]

. Thanks in Advance. neil k. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60719&t=60719 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure viola

Re: OSPF DEMAND-CIRCUIT, not stopping the link UPDOWN [7:60719]

I mean sh dialer. PPP multilink is enabled on the circuit. also no peer neighbor-route is defined. Still having problems. neil ""neil K."" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Guys, > > The ISDN back between two of my routers keeps

Re: OSPF DEMAND-CIRCUIT, not stopping the link UPDOWN [7:60719]

610-712-5700 > [EMAIL PROTECTED] > > -Original Message- > From: neil K. [mailto:[EMAIL PROTECTED]] > Sent: Thursday, January 09, 2003 12:25 PM > To: [EMAIL PROTECTED] > Subject: OSPF DEMAND-CIRCUIT, not stopping the link UPDOWN [7:60719] > > Guys, > > The ISDN ba

Re: OSPF DEMAND-CIRCUIT, not stopping the link UPDOWN [7:60719]

Ya, redistribution of RIP into ospf but bri is on passive int. neil ""Scott"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Are you doing any type of redistribution on these routers? > > ""neil K."" wrote in message

Voice Over Internet [7:61467]

this. Thanks in advance. Neil. K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61467&t=61467 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure

Re: Voice Over Internet [7:61467]

Is it supported by Cisco and I am taking about connecting office's with 4 - 10 phones. Does yr Service Provider provide any kind of QoS. Thanks, Neil ""neil K."" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Guys, > > I have a few

Re: Voice Over Internet [7:61467]

trator you are > thinking about using to see how much delay you can expect to have to > deal with. > > 3. Solution? Most new Cisco routers and switches support QoS > configurations that enhance the probability of achieving good voice > quality within a network. I do not know the s

PBX knowledge for VoIP [7:61958]

Hi Guys, Need your help. How much PBX knowledge / Voice networking knowledge is necessary to be a good VoIP Engineer. Any suggestions on books to go through or any web sites. Thanks, neil K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61958&

NAT and VoIP [7:62053]

Anyone heard about having problems with NAT and running VoIP. I want run VoIP across a DSL link with NAT. Thanks in advance. neil K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62053&t=62053 -- FAQ, list archi

CCNP Recertification [7:62055]

Anybody passed CCNP recertification test recently. Any suggestions, what to look for and what books to refer. Thanks, neil K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62055&t=62055 -- FAQ, list archives, and subs

Connection Trunk, Tie-line [7:62291]

number. I have seen this number corresponds to the phone number on the other side of the trunk, but what happens if I want to call many phone/extensions using the same FXO / FXS trunk configuration. I will appreciate your help. Thanks, neil K. Message Posted at: http://www.groupstudy.com/form

Implementiong QoS [7:49183]

Hi All, Please recommend a QoS technique for implementing on Cisco 2600's connected by Wireless links ( Aironet Wireless) which does not support any Qos. I mean I am planning to implement QoS on the Router's and the send the traffic to Bridges on to sides. I was planning to implement CBWFQ on th

VoIP Bandwidth Calculation you wil have to consider two VoIP [7:49381]

Hi All, Using the standard formulas, I see for a bandwidth required for a g.729 call is 24kbps without RTP compression.I used to do the same when using other codecs. Recently I came across some VoIP documentation which said that you will have to consider two RTP flows to simulate a call, and henc

Re: VoIP Bandwidth Calculation you wil have to consider two [7:49404]

age [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I'm not sure the context the document was written in, but it's only 24K > (give or take depending on the L2 encap) that you need to plan for. > > Steve > > > ""neil K."" wrote in messa

aironet wireless lan [7:50153]

Hi All, Recently Installed Aironet 1200 series based wireless LAN,with cisco LEAP authentication.Now the network works for a couple of days and then doesn't until I reboot the Access Points or the Cisco 3524-PWR-XL series switch from which the access points are powered. Has anybody faced problem

Dial out solution [7:51230]

Hi All, Guys I am currently using a Shiva modem pool for dial out, Is there a Cisco solution for this.The Shiva is not working upto our expectations. Will the Cisco Access Servers or a cisco 3640 with modem card be able to do the same. Any help will be highly apprecisted. Thanks, neiL Messa

Dial out solution [7:51231]

Hi All, Guys I am currently using a Shiva modem pool for dial out, Is there a Cisco solution for this.The Shiva is not working upto our expectations. Will the Cisco Access Servers or a cisco 3640 with modem card be able to do the same. Any help will be highly apprecisted. Thanks, neiL Messa

FXS and Key System connection [7:52288]

Hi Group, Could anyone please tell me is there a way to connect FXS to Key system, I was thinking that it can only be used to connect to an Analog phone or Fax, but I have heard there is a way to connect it to Key system, I guess in that case some programming might be needed in Key System. Pleas

Mincir/Cir [7:55223]

Hi Group, Can someone please explain to me the difference between cir and mincir.Any help is highly appreciated. Regards, neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55223&t=55223 -- FAQ, list archives, and subscripti

CIR / minCIR [7:55284]

Hi Group, Can someone please explain to me the difference between cir and mincir.Any help is highly appreciated. Regards, neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55284&t=55284 -- FAQ, list archives, and subscripti

Books for CCM and Unity [7:73358]

Folks, Any books you would recommend for Cisco CallMager and Unity and Cisco IP Telephony Design. Thanks, Sunil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73358&t=73358 -- **Please support GroupStudy by purchasing from the

Catalyst 6500 Architecture [7:74460]

Folks, The Catalyst 6500 uses a Shared bus Architecture and to increase the Backplane capacity you have to have Switch fabric module (SFM) with fabric Enabled modules to make it work. Is there a vendor which has a better architecture or a better solution. Thanks, neil K. Message Posted at

NM-1CT1 or WIC-1DSU-T1 [7:74741]

Can somebody explain when I can use WIC-1DSU-T1 over NM-1CT1 or what exactly are the difference except that WIC-1DSU-T1 has a built-in DSU/CSU where as NM-1CT1 is a T1 Module. Thanks in advance. neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74741&t=74741 --

Re: Cisco Vs. Low cost switches -Whats the Diff ? [7:74987]

Options like enhanced security, Enhanced QoS, protocol and technology support. neil ""Steven Aiello"" wrote in message news:[EMAIL PROTECTED] > Ok, > >So I know there is a big difference in the cost and performance of > Cisco (even lower end models) and let say a netgear switch. But where >