Hi everyone,
I am having a problems with my AS5300. First of all upon reboot it stopped
showing the serial interfaces only the ethernets and the mica modems. Then it
sopped booting altogether. I think its fault resides in the rxboot memory
module. I have tried booting it bare with out the FLASH
Hi all,
I was thinking of changing the flash of my Cat 5000 with Sup 1. where do
I get the flash and can the boot roms of cat switches be up graded like
in the routers. Also A friend of mine is facing a problem on his sup
engine the engine wont pick up its MAC address and also its own serial
Hi all,
What is the max ram and flash you can have on a cat 5000 with Sup 1.
Any input??
Thanks
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=46708t=46708
--
FAQ, list archives, and subscription info:
Hi all what is minimum IOS required for VoIP implenetation I have 4K
flash and 29K RAM
thanks.
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=46118t=46118
--
FAQ, list archives, and subscription info:
Hi all,
How do I upgrade Cat% OS from 2.4 to 4.2. I believe I need IOS 3.3 but I
dont where to download it. Plz send me the URL for the Download.
Thanks
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=46117t=46117
--
FAQ,
Hi all ,
Could any one guide me how to hook up a teltone line simulator with a
router. I have no experience in this. Do we use th AUX??
thanks.
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45657t=45657
--
FAQ, list
Hi all,
I have got a query a company is running a 128K bandwidth Frame Relay
network. They have upgraded to 256K but they are having trouble running
Point to Multipoint connections. But Point to Point work fine. what is
the reason?
Any Help will be appreciated
Omer
Message Posted at:
Hi all,
Could you point me to resources that discuss an ISP's setup from ground
up the major components and equipment and software required and how it
works and more importantly how to make it work.
Thanks in advence.
Omer
Message Posted at:
Hi all,
I have a query that whenever I connect to my ISP I get an IP address a
mask and a default gateway.This is what it looks like
PPP Adapter:
Connection specific DNS Suffix:
IP address: 203.135.17.194
Subnet mask: 255.255.255.255
Default gateway: 203.135.17.194
what is default gateway and
Hi everyone,
Happy new year to you all.
Could you send me URLs of sites that help teach you how to manage
portals and the building blocks of portals and the issues involved.
Thanks
Omer Ehsan Dar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=30601t=30601
Hi all,
Sorry for the off topic question does anybody know about a mailing like
this one for solaris specifically on intel platforms.
I would be grateful for the input.
bye
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=26966t=26966
Hi all,
I was just wondering whenever I connect to the ISp I get the following
mask. Why is this? And why is the default gateway and the ip address the
same?
Ip address: 203.135.18.108
Subnet mask: 255.255.255.255
Default Gateway: 203.135.18.108
Thanks
Omer Ehsan Dar
Message Posted at:
http
Hi all,
I just wanted to know how i can get pp authentication to work. When I
enable either PAP or chap the line protocol goes down. The debug PPP
negotiation output says that the request was timed out.
What I did then was I took an example out of the CCNA manual and even
When I did exactly that
Hi all,
Just wanted to know what is the lab swap procedure. I know that I have
to release the date and someone has to take that date but How do I get a
date. do I get that persons date or can I get a new date?
thanks in advance
Omer
Message Posted at:
Hi all,
First my condolances to the victims of the attack in NewYork and
Pentagon. No words can describe that emotion one feels after watching
the events live.
I wanted to ask about IOS image file namesI have three IOS with
extension bin but two IOS have the following names c5200-boot-l.112-17.P
Hi all,
If any can help me out I would be grateful
Thanks in advance
Omer Dar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=17621t=17621
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi all,
I have IBM Token ring MAUs and I want to connect them to my token ring
lan cards. Can I connect the DB-9 to a terminal adapter and then connect
it via RJ-45 to the lan card. Will it work? in theory it should.
Thanks
Omer Ehsan Dar
Message Posted at:
http://www.groupstudy.com/form
Hi all,
Can you restrict console access to the router? Does it accept an
encrypted password. Also can you prevent in some way people from using
the copy run start command so that they cannot update the router config.
Thanks
Omer
Message Posted at:
Hi all,
Can any send the enterprise edition software for a 1912 switch plz I
would be grateful.
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14599t=14599
--
FAQ, list archives, and subscription info:
Hi all,
Can anybody pint me to a resource that explains the working of TK MAUs
with cisco routers or just how they work.
Omer Ehsan Dar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14333t=14333
--
FAQ, list archives
Hi all,
Where can I find good cabling info related to LAN networking and the
cisco switches in particular.
Thanks
Omer Ehsan dar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=13317t=13317
--
FAQ, list archives
Hi all,
these contarary messages from to commands ahve me stumped once it says
that layer 1 is working and then it says that it isnt. Could anybody
tell me what the problem is???
Omer
2503#sh isdn stat
The current ISDN Switchtype = basic-ni1
ISDN BRI0 interface
Layer 1 Status:
ACTIVE
Hi again, I have a teltone isdn simulator that I am using it has fixed
spids that I use. I will try to run the debug commands you mentioned
When I ran debug isdn q921 it gave no call setup procedure just RX with
some parameters I will run it again and send you its
output.
if you have running
David you are sooo right I am schduled on the 21st and 22nd of Feb 2002
and hope to make it on my first try. If I know my stuff no proctor will
flunk me
omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=12405t=12253
--
FAQ,
sorry, I was refering to the MII(media independent interface) connector.
Just wanted to know where I would get the cable for that. You have two
of those on the Catalyst 5000 Switches you know.
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=10743t=10480
Hi all, where Can I obtain Fast ethernet cables for a cat 5000 modules
supervisor engine
Thanks
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=10480t=10480
--
FAQ, list archives, and subscription info:
. but then the U interface was back up again
and the S/T interface also worked fine so I thought everything was
fine. then this started happening. I tried it on two other routers which
have BRI interfaces(2503 2520) at first I had tried it on a 2504 and
another 2503.
Thanks
Omer Ehsan Dar
sh isdn
Hi all, i was trying to configure isdn using a teltone simulator
everything worked fine and checked out till I tried to ping the other
router. i am send two outputs below for claification. As I got it the
spid numbers are not rightly configured. By the way they say with the
switch the spid1:
dear Ken, Hi,
Look also intoi Bridges routers and switches for CCIEs by Andrew bruce
caslow a must read for CCIE written and ccie LAB
Omer Ehsan Dar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=9147t=9091
--
FAQ, list archives
run it in the latest version
of C++ or Visual Basic.
That is my opinion of course.
Omer Ehsan Dar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8931t=8807
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Hi all,
could anybody point out the source of cisco boot strap chips? Can we use
third party chips or do they have to be cisco approved.
Thanks in advance.
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8934t=8934
--
FAQ,
Hi all,
In the danger of getting flamed I will enter this message. There is a
great deal of debate here that you cannot become a a good Cisco
Certified Network Engineer without having a Electrical Engineering
Degree majoring in communications well the list has members who dont
have the degree but
Hi all I keep on receiving this message on my router that the 12.1
commands may not be executed properly
what does this mean?
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7821t=7821
--
FAQ, list archives, and subscription
hi all,
i have had a problem with my 4500 router,
i think I need to replace the flash and upload the new image from the
tftp server is it the correct method. below is the output that i get
when I boot the router
loadprog: error - on read during ELF program load
requested 6789992 (0x679b68)
Hi all does any one knopw the web site that tells you about the adaptor
that you put in like terminal adapter or modem adaptor etc.
Thank for the help.
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=6416t=6416
--
FAQ, list
Hi all,
Someone asked me what ISDN demonstartor would be needed to connect to a
2503 router. Teltone markets two the ISDn demonstrattor or the ILS2000.
The ISDN demonstrator would require an NT1 while the ILS2000 would not.
any comments are welcome.
Omer
Message Posted at:
, VoFR.
If someone can send me the student guid eI would be grateful. Is the
Voice over IP book good for this exam.
Any other materials will be helpful plz send me the links a ny helpful
web sites.
Omer Ehsan Dar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2937t=2937
Hi all,
I am preparing for my CCIE written and I have been through quite a lot
of stuff but have some ambiguities. I hope you can help me out.
1. What is the result of sending a loop up signal to the CSU/DSU?
2. When converting a serial line between two routers to X.25 what needs
to be done?
HHi all,
I wanted to know if anybody know how to calculate how thw sequence
numbers increase or decrease in transmission from one host to the other.
Also how is the RIF calculated when it trverses through a number of
rrings and bridges.
I have the basic knowledge of rif and read all that is
Hi all, I wanted to read up on SSSRP I could only find some stuff in
Network Case studies but nothing except the word occuring in a couple of
instances in Caslow or giles. Can somebody recommend some other source.
Alos what would you term fast etherchannel as gigabit or not it is 800
Megs?
thanks
Hi all,
I have a 2503 router with 12.0 IOS. it does not obey the password
recovery command the break command does not work if you hit it during
bootup. Any suggestions.
Thanks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi all,
Can we stop access to the console port from VTY session or telnet.
Thanks
Omer
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi all,
When I ping the loopback address the reply is much quicker than when I
ping a serial interface that is directly connected.
Why is this?
Omer Ehsna Dar
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Hi all,
If I want to make back to back cables to connect my routers together
what will be the requirements and should I do so? or do I have to buy
the real thing?
Thankx.
Omer Ehsan Dar
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Dear Friends,
I am appearing for my CID exam next week. I am studying from the cisco
press book which I have heard does not cover all the topics from the
exam point of view. Any input will be helpful.
thanks.
Omer Ehsan Dar
_
FAQ, list archives, and subscription
Dear friends,
Please send me all the resources you used to pass CLSC. I am using the
student manual for my prep.
Also please tell me the exam format and are Boson Tests useful.
Thankx.
Omer Ehsan Dar
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list
46 matches
Mail list logo