I think A would be right, because C would not be a "simple" solution, ex.
they would have to maintain a list of unauthorized sites.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Love Cisco
Sent: Friday, February 22, 2002 10:16 PM
To: [EMAIL PROTECTED]
As someone once told me, BGP, OSPF, BGP, VLSM, OSPF, BGP, and some OSPF and
BGP.
When I prepare for an exam, then FIRST and LAST things I do are look at the
Cisco sheet that tells what topics are on the exam. Knowing what is on the
test before you start reading helps, and also lets you get a feel
Can someone recommend a good place to read about all the details of how SPAN
works. I tried searching cisco.com and google.com but didn't find enough to
make me happy.
Basicly, I want to SPAN ports 1-4 to make all traffic go to ports 5&6. Can
this be done?
Thanks
-Russ
Message Posted at:
ht
How do I disable these messages in my show log?
*Jan 8 08:00:57: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
FastEthernet0/0
(not full duplex), with blah.blah.com FastEthernet0/0 (full duplex).
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31284&t=31284
We have a Cisco 2501 that keeps crashing occasionaly, it's almost as if it
stop responding to pings, then an hour later it decided to come back up. I
have swapped out the router with another one and the problem is still there.
Last night the new router did the same thing. I checked my log and ther
Can someone help me figure out the MIB's to get information from the show
interface commands?
I am specifically looking for.
-input/output
-crc
-carrier transitions
-overruns
Thanks
-Russ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28826&t=28826
#x27; from it. My
question is, how should I present these materials in the interview; should I
even take the actual certificates in to the interview with me? If someone
has some personal tips, or a website to help me prepare for this interview
it would be greatly appreciated.
Thanks in advance,
R
Can someone help me figure out the MIB's to get information from the show
interface commands?
I am specifically looking for.
-input/output
-crc
-carrier transitions
-overruns
Thanks
-Russ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28683&t=28683
I always put on a secondary of the new IP so I make sure I can always fall
back to the old IP. Once it works I move the IP's around and remove the
secondary.
-Russ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Debbie Westall
Sent: Monday, December 10,
> And if you are talkin of your friend with 10 years of exp. and he cant
find
> a job then I really doubt what he has been doin from last 10 years that he
> cant find a job of courseif he is looking for a salary of somethin like
John
> Chambers then he won't get that.
Actually I think I read i
wouldn't you need to be in enable mode to see that?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Lists Wizard
Sent: Tuesday, October 02, 2001 3:51 PM
To: [EMAIL PROTECTED]
Subject: CCIE Written: autocommand [7:21721]
Dear Professionals,
I have tried
cistron-radius on a linux box.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ahmed Malkawi
Sent: Thursday, September 20, 2001 7:00 AM
To: [EMAIL PROTECTED]
Subject: IP address - user name [7:20527]
Any body knows how can i map ( IP address - user nam
Hello all -
I need to bridge E1 to S1 on a router, and route E0 to S0, how can I do
this? This router config is the same on each end.
END A END B
E0-S0 -- S0-E0
E1-S1 -- S1-E1 (Bridge)
END-A E0 - 192.168.1.1 END-B E0 - 192.168.2.1
END-A E1 - Bridge END-B E1 - Bridge
Not
Hello all -
I need to bridge E1 to S1 on a router, and route E0 to S0, how can I do
this? This router config is the same on each end.
END A END B
E0-S0 -- S0-E0
E1-S1 -- S1-E1 (Bridge)
Thanks
-Russ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19472&t=19472
--
At the end of the exams you take it asks you if your 18 years of older.
Lucky I took my CCNA the day after my 18th b-day, so I was alright. I am
currently studying for CCNP and plan on being CCIE within 2 years.
Good luck on your CCNA, young people rock! :-)
Russ
CCNA, CCDA (Not the oldest eithe
Does anyone know of a good site that has sample lab layouts and scenarios. I
recently got (5) 2621's and a 2924 Switch and am looking for ways to setup a
lab and practice for my CCNP.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15198&t=15198
---
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14967&t=14967
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
What would cause a 2600 w/T1 WIC to go into loopback when powered on?
Thanks
-Russ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14810&t=14810
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
Does anyone have a switch that I could have access to for awhile so that I
can try some stuff out? Also any pointers to a switch simulator would be
appreciated also.
Thanks
Russ Kreigh, CCDA, CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14388&
Hello all, I am taking my CCDA at the Chicago Networkers this Monday, and was
looking for tips on what to concentrate my last couple review days on, and
any
advice.
Thanks
-Russ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12227&t=12227
---
I have a Cisco 4500 and 2502 Routers online that I will give access to for a
day for $5
Anyone Interested???
More equiptment to come soon ... ;-)
-Russ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9885&t=9885
--
FAQ, list a
STFW!
- Original Message -
From: "Christopher Kolp"
To:
Sent: Wednesday, May 30, 2001 4:02 PM
Subject: RE: Intrusion Detection [7:6494]
> link please
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Snort is also a decent one for the price (free)
- Original Message -
From: "William E. Gragido"
To:
Sent: Wednesday, May 30, 2001 3:11 PM
Subject: RE: Intrusion Detection [7:6494]
> Check out Intrusion.com
>
> They make some truly great products
>
> -Original Message-
> From
We look down upon you because you have to brag about how much you make.
- Original Message -
From: "Jim Bond"
To:
Sent: Tuesday, May 29, 2001 7:40 PM
Subject: another OT: why you UNIX guys look down on we NT guys? [7:6323]
> UNIX guys,
>
> I make $240K per year, how much you make? Wh
ftp
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mike Baker
Sent: Friday, May 18, 2001 3:57 PM
To: [EMAIL PROTECTED]
Subject: Bandwidth Tester [7:5062]
Does anyone know of a freeware app I can load on a windows box on either
side of a serial link t
currently running smart brand memory in my 2500 series, 16mb parity simms
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
xc
Sent: Sunday, April 29, 2001 8:34 PM
To: [EMAIL PROTECTED]
Subject: has anybody tried non-Cisco approved flash/memory [7:2498]
I
I too am only 17 years old and like Priscilla I think this is a
controversial topic. However, I have a very strong opinion, therefore am
going to express it. :-) I currently work for an local ISP and have quite a
bit of Cisco experience along with very much UNIX (BSDi, Linux, HP-UX,
Solaris), HTML
The line "System returned to ROM by power-on" bothers me, do I have a
problem with my router? I think it appears to be running from ROM, is this
true?
ROUTER>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.1(2), RELEASE SOFTWARE (fc1)
Copyright (
Am I missing something here? I mean an average DHCP process with the ACKs
and all that jazz is not that much, probably less than 5k I would imagine.
And there would be very little processing required to finish the request. I
think it would take a LOT of requests to even bog down a Pentium 100 a
li
I remember seeing something about a service called "nagle" that groups
telnet packets.
enter config mode and type "service nagle" to enable it.
-Russ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Tony van Ree
Sent: Thursday, March 01, 2001 4:13 PM
To:
Well of course a 4700 (or equivalent) will handle more traffic than a
2501!!!
Thanks kinda not a fair comparison don't you think.
- Original Message -
From: "anthony kim" <[EMAIL PROTECTED]>
To: "Mark Nguyen" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wedn
Ken,
It sounds like you changed the config-register to 0x2142 to change the
password, and now to allow the router to save a configuration you need to
change the config-register back to 0x2102.
Hope this helps
___
UPDATED Posting Guidelines: http://www.groupstudy.
9600 8 N 2 with NO flow control
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
dennis.barker
Sent: Thursday, August 17, 2000 10:39 AM
To: [EMAIL PROTECTED]
Subject: 4000-M
I've got a 4000-M router that I can not get into. I'm going through the
console
This is a snip of a config that will limit the IP Address defined in the
access list (105) to 128k on the Ethernet Interface.
!
interface Ethernet0
ip address 10.1.1.1 255.255.255.0
rate-limit input access-group 105 128000 128000 128000 conform-action
transmit exceed-action drop
rate-limit out
Click on the thing that says "Get a free copy of IP telephony. Take the
quiz" at the top of the page
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dick Silva
Sent: Monday, July 31, 2000 12:43 PM
To: Ed Farmer; [EMAIL PROTECTED]
Subject: Re: Cisco Free
Can someone tell me where to get Visio Icons, specifically for the 2600
Series. I don't have a CCO login so I can't get them from the Cisco site.
Thanks
Russ Kreigh
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list arc
Whats the config-register?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kiarash Bodouhi
Sent: Monday, July 17, 2000 4:05 PM
To: [EMAIL PROTECTED]
Subject: Re: Losing configurations
Hi,
Please check your start up config to see whether your changes
Hi all I posted a question a while back asking how to limit the maximum
speed of an IP address. Well I have kinda got something working that does do
that, but it limits everything!
access-list 5 permit 10.1.1.2
access-list 5 deny any
Ethernet 0
ip address 10.1.1.1 255.255.255.0
ip address 10.1.2
Hi all I posted a question a while back asking how to limit the maximum
speed of an IP address. Well I have kinda got something working that does do
that, but it limits everything!
access-list 5 permit 10.1.1.2
access-list 5 deny any
Ethernet 0
ip address 10.1.1.1 255.255.255.0
ip address 10.1.2
Lucent's WaveLan now Orionoco has access control based on MAC address,
anyone else using it?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
benh
Sent: Tuesday, June 27, 2000 11:07 AM
To: Olden Pieterse
Cc: 'Collin Clark'; '[EMAIL PROTECTED]'
Subject: RE:
some
things, but they all seemed really difficult and I didnt think something
like this should be that complex, so if someone can help me out it would be
appreciated.
Thanks in advance
-Russ Kreigh
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list
41 matches
Mail list logo
